Related
Hello, I am new here...
Help!!!,
I've bought a Cingular hw6920 and I would like to use it when I travel, with local SIM cards.
The phone is obviously locked and when I try to use another SIM, it shows the message "Network is locked, please input unlock code".
Since I have a Cingular account, I've asked for the code, but after sending them the IMEI (correct), they have replied that they cannot find it!
Same thing happened when I've tried to get the code through one of the pay services.
Any suggestion? I can't return or exchange the phone since I left it to my brother in Europe.
Thanks
Probably a silly question but I have the following problem:
I have 3 cards (Orange and 2 x T-Mobile). When I put either T-Mobile SIM in my phone, it requests a SIM network unlock PIN. I have the option of entering this in or clicking a dismiss button which will take me pass this screen but doesn't register onto the GSM network. This doesn't happen on my Orange SIM as this registers straight away onto the GSM network.
All 3 SIM cards do not request a PIN when I use them with two other phones that I have (HTC Hero and HTC TyTn 2).
On the SGS I have tried the pins 0000, 12345 and 1234 which are default PINs that I recall. I've checked the manual for the SGS and the literature that came with my T-Mobile SIM card and neither give any hints about a default PIN or about a SIM network unlock PIN.
I'm not sure if the PIN request is coming from the phone or the SIM card. I'm guessing it's coming from the phone but I don't know why it doesn't request this when I use my Orange SIM card.
I purchased the phone SIM free. The Orange SIM is a PAYG and the two T-Mobile SIMs are pay monthly contracts. I know all 3 SIMs work without PINs in my other phone.
Can anyone help? I'm assuming I'm missing something really simple but can't figure out what. I've already tried a dozen google searches with no luck. Please please help. I feel I'm being deprived of my 2 hour old SGS phone
I've now taken a video of the boot up sequence to show you what it looks like: http://www.youtube.com/watch?v=3D-RvvCK2bM
Can anyone confirm or refute whether this is happening on their SGS too? It seems like it's a Security Code on the handset but I can't find any setting for such a code.
Any help will be greatly appreciated.
Techno79 said:
Can anyone confirm or refute whether this is happening on their SGS too? It seems like it's a Security Code on the handset but I can't find any setting for such a code.
Any help will be greatly appreciated.
Click to expand...
Click to collapse
Don't think your phone is actually SIM free... no issues here using any SIM I like (purchased from Unlocked Mobiles). Where did you get yours?
n4nick said:
Don't think your phone is actually SIM free... no issues here using any SIM I like (purchased from Unlocked Mobiles). Where did you get yours?
Click to expand...
Click to collapse
I purchases it from handtec. I don't think it is Sim free for the following reasons:
1. It was listed as Sim free
2. The box it came in also seems to indicate it is Sim free
3. There is no carrier logo on the phone or anything it came with
4. Seems to work with my Orange Sim card (which implies the phone came from orange if it was Sim free and this phone hasn't been released on Orange).
I'm guessing by the single thread reply that no one else has come into this issue before? And it's probably not just a simple default security code?
I don't know if this will help, but when I was asked for a sim code on a new Nokia phone, about two years ago, I rang Voda and asked for the pin code. In your case you would need to ask T Mobile.
I have the exact same issue with my Galaxy from Handtec which arrived today. I hope they aren't selling sim-locked phones as sim-free... Time to call Voda...
Ok, apparently it's a known issue. Just spoke to handtec, they say they got a batch of phones from Samsung which are locked to Orange. Call them for a replacement/refund. Don't mess about with the phone support line, it just points you to the website and disconnects you, call them and speak to sales. 01733 298500
mcleancraig said:
Ok, apparently it's a known issue. Just spoke to handtec, they say they got a batch of phones from Samsung which are locked to Orange. Call them for a replacement/refund. Don't mess about with the phone support line, it just points you to the website and disconnects you, call them and speak to sales. 01733 298500
Click to expand...
Click to collapse
Ah ok, that makes sense and which is why my Orange SIM card worked but not T-Mobile. I may have come to this conclusion if I had a Vodafone and O2 SIM knocking about.
Thanks for the info. Will be returning the phone for a replacement.
n4nick said:
Don't think your phone is actually SIM free... no issues here using any SIM I like (purchased from Unlocked Mobiles). Where did you get yours?
Click to expand...
Click to collapse
@n4nick: It appears as though you were right although the phone doesn't look like an Orange locked phone. Orange are notorious for plastering their big ugly logo on the physical phone and all over the software. They even put their logo on the box, accessories and manuals. This phone really looks like a SIM free version.
I wonder if the Orange locked batch were due to go to Orange for them to do their usual carrier differentiation before they then go out to customers.
Hi!, I've bought Samsung Galaxy S from handtec too and I get the same message: sim network unlock pin. I've just sent request to Handtec support.
What about you? Did you somehow unlock? Or did you change your phone?
Speak to Handtec about it and get a replacement or a refund as the item sent out is the wrong item. As mentioned previously, I believe the mistake was from Samsung as they sent a batch of Orange locked handsets as unlocked handsets which Handtec then sold accordingly. Handtec seem to be handling the whole mixup very well with good customer service so you should be ok.
Yeah I'm experiencing this issue as well. Phone worked fine for 7 days then today out of nowhere I get the SIM network unlock PIN alert upon startup. I contacted Handtec and this is all they had to say.
Thanks for your email,
Unfortunately this is an error with Samsung and we will require all of the items back, postage will be covered once back and confirmed it is an orange locked device but we will require this back to replace it for you.
Please advise,
Kind regards.
Click to expand...
Click to collapse
I can't be bothered with sending it back and being without a phone for atleast a week.
UltimaRB said:
Yeah I'm experiencing this issue as well. Phone worked fine for 7 days then today out of nowhere I get the SIM network unlock PIN alert upon startup. I contacted Handtec and this is all they had to say.
I can't be bothered with sending it back and being without a phone for atleast a week.
Click to expand...
Click to collapse
Legally they have to give you a full refund including the postage cost for both ways. Therefore you could purchase a new handset while you are in the process of getting a refund for the existing one. You'll know if it is an Orange locked phone because there was one or two Orange specific applications pre-installed on the phone.
If it was working before and not now then it's possible it could be a different issue though.
I work for t-mobile and samsung sent us some unbranded phones that were locked to orange by mistake. That chances are we wernt the only ones to receive them
Sent from my GT-I9000 using XDA App
had this problem myself on O2
went to store to use their phone to ring around (they were sorry)
after time on the line with O2 support they had no answers, so i rang samsung
samsung took literally seconds on the phone, i said about the 'sim network unlock pin' and he simply turned round and said its dead, a dead chipset thats in every phone they sent out in the last week, i was told this on friday 11th
samsung then spoke to the staff at the O2 store and advised them to mark all other galaxys they had as 'dead on arrival' and return them and for others to do the same
looks like a big batch issue so best thing u can do is send your dodgy one back like i have done, hopefully this replacement will work
I just got the Network Unlock PIN Message myself randomly after a reboot 7 days after purchase.
Has anyone tried using a TurboSIM to see if it works?
Sad thing is it was working one day and then broke the next.
Pretty bad that we have to pay postage to get their doa replaced. ( Specially considering that's about $50 for me. )
EDIT: Does anyone know what the STOCK firmware was when you got your handtec handset? ( From what I can tell it could be XXJF3. )
EDIT2: Success! After contacting Handtec they sent me a code to use, it seems to have permanently network unlocked my phone.
After a few emails with Handtec they were able to provide me with an unlock code after giving them my IMEI number. All is good again
I have a similar problem with T959 from TMobile USA. The phone was obviously locked to TMobile but I got the code from TMobile, entered it and phone was unlocked. My customer took home, used it for about a week and now the phone is network lock again and ask for network pin. So I enter the same code that was used to unlock it but now it DOES NOT work. So strange. But this happened before on other android phone and it worked, just re-enter the code. Anyone has a solution yet on this problem?
aaarrrggghhhh!
I have same problem but.... the unlock code Handtec sent me does not work
I have tried every method I can find on the internet to enter the unlock code (eg #0111*code#, #7465625*638*code# and even #7465625*638*# which pops up with a seperate box to enter the unlock code) and each time it fails. I've even done this after various full hardware resets.
Hantec have said the phone might be faulty with a software problem and to send it back to them.
I am in Cyprus and its going to cost me 50 euro to send it back. If I had paid an extra 50 euro on the Handtec price I could have bought it locally! Doh!
Mark.
newtonthecat said:
aaarrrggghhhh!
I have same problem but.... the unlock code Handtec sent me does not work
I have tried every method I can find on the internet to enter the unlock code (eg #0111*code#, #7465625*638*code# and even #7465625*638*# which pops up with a seperate box to enter the unlock code) and each time it fails. I've even done this after various full hardware resets.
Hantec have said the phone might be faulty with a software problem and to send it back to them.
I am in Cyprus and its going to cost me 50 euro to send it back. If I had paid an extra 50 euro on the Handtec price I could have bought it locally! Doh!
Mark.
Click to expand...
Click to collapse
To enter the code you should put a SIM in, and start the phone, it will ask you straight away...
If you attempted to enter wrong codes too many times it will stop asking you and your phone is permanently locked until you return it to the manufacturer.
Oh noes, mine better not relock... :\
Just out of curiosity, how many 5's does your code have?
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
I had similar issue my w580i. I had it after putting the unlocking code it stop recoganising SIM, havn't solution till now
Did you try using a different Rogers sim?
I don't have a rogers SIM, only AT&T. I bought the phone locked and just figured I would be able to get an unlock code like all the other phones I've had before, but no dice.
Check your pm
Sent from my X10a using XDA App
I just tried to put in my deactivated Rogers SIM card from long time ago, and I am also getting "No SIM Card" ... Not sure if your problem has anything to do with Rogers Wireless used to be "Rogers AT&T" before
If you have any friends has SIM card from different carriers, try to put those in and see if you experience "No SIM Card" issue.
Regards
Mabye it does.. I'll try and find someone with a Tmobile sim I guess.. thanks for the advice though..
Please keep me updated on this, I'm trying to unlock my X10, I got the code from cellunlock.net through the manufacturer and keeps telling me after I enter the code that it was unsuccessful.
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
junkk29 said:
I still can't unlock my phone either but I'm not sure about the SIM unlock code you're talking about. Are you talking about the IMEI? or the actual code that's used to unlock the phone? I've tried Mobileincanada.com but they couldn't unlock my phone and gave me a refund and I'm still waiting for this dealer on ebay. Good luck dude, keep us posted
Click to expand...
Click to collapse
Got an unlock code, www.cellunlock.net
Make sure to pick the Sony Ericsson Manufacturer code it's 34.99 but well worth it. It works now.
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Jikenda said:
the manufacturer unlock code is the one I got, but I just don't get the option to put it in because the phone doesn't recognize the AT&T sims that I've put into it...
Click to expand...
Click to collapse
How old are the sim cards? If they are old, get new ones. Also, try re-installing the firmware through seus and then putting in your sim card. I never had that issue, I just had a hard time finding the code.
I had a real old one from cingular, but then I just went to AT&T and got a brand new one, but same issue. I'll try updating and see if that helps, but will the phone update without a valid sim inserted?
Jikenda said:
Hi all, I'm new here and before I tell you the problem, I appreciate all the info on these forums and the work that is put into everything. Thank you in advance.
So, I have a locked Rogers branded X10a, and I was unable to get the SIM unlock pin. So, I got the network unlock code, but whatever sim I put in, the screen always reads "no sim card" in the phone and then the activating screen loads and continues to load forever. Under settings (without a sim in the phone), there is the option for sim unlock pin, but that is the code that I am unable to get after numerous tries on different sites.
How can I get to the screen to enter the sim network unlock code if the phone in not recognizing any sim cards that I put in? Btw, I'm using AT&T. Any help would be greatly appreciated. Sorry for the length of this post and thank you.
Click to expand...
Click to collapse
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
RumpleStealthSkin said:
I had that same problem. Call AT&T or go to your AT&T account online and get the PUK number. Also, did you call AT&T and told them you have a new phone? They need your phone's new IMEI number.
Click to expand...
Click to collapse
I'm sorry, what is the PUK number for and also, why does AT&T need my IMEI number? I mean, the phone is still locked to rogers right now regardless, right?
Lots of noob questions, sorry.
Also, i already spoke to AT&T, Rogers and Sony Ericsson about the issue, but none of them are any help of course. The PUK did nothing for me either. I feel like I am running out of options here...
welcome to the club
http://forum.xda-developers.com/showthread.php?t=717414&highlight=phone+stuck
so far no solution
So, I tried repairing through PC Companion and then I also ran the update and go the newest firmware installed now, but still same problem. Phone does not recognize the AT&T when inserted and therefore, no option to enter the network unlock code. Any others have any luck/make any progress??
wow... i guess i'm in the club as well. I just got back from the Rogers store and they wouldn't let me replace the phone anymore. I've bought the manufacturer's code which is suppose to work 100% but it didn't...so desperate
Sorry to hear that...
You said the code you got didn't work? In what way? did you try to get a refund by providing video evidence?
On a side note, does anyone know how to access a keypad on the x10 that enables you to imput the left arrow, *, * left arrow method to input the code? I realize I need to have a valid rogers sim inserted in order for this to work, but I do not see how to input the arrow keys. Any suggestions? As I've said, I'm new to android and to a device with no physical keyboard, so maybe this is very simple...
thanks and good luck to others in the same spot as me right now..
I just bought an Orange branded SGS, which should have been unlocked. So I was surprised when it kept asking for PIN code which I thought would be 0000 but after several tries this did not work.
At first it was not seeing the sim card so I downloaded the SGS unlock from android market. This gave the unlock code and unfreezing code. it then saw the SIM card or at least the no SIM card logo disappeared.
the problem is it is not registering on the network. I went to an unlocker shop and they even tried an Orange Sim card this still did not work.
Still no Joy
Any thoughts and suggestions would be gratefully received
Have you tried calling orange to see if the imei had been black listed? Could be a lost/stolen phone you have unfortunately purchased
Sent from my GT-I9000 using XDA App
Hello everybody, sorry if this has been asked I tried searching everywhere and have come up with nothing that has been helpful to me. I am new here so if I'm posting in the wrong place I'll be happy to remove this.
I will try to provide you with every detail but my main problem is this: I have obtained an unlock code I received directly from Sprint for a Galaxy S5 I received from a friend. The friend made sure the device and his account met their qualifications, and he received a six digit "MSL Code" that he was told is the unlock code.
I have been told by Sprint, AT&T, countless YouTube videos and forums that the sequence for unlocking this phone is as simple as 1.) Entering a foreign sim into your device. 2.) When you turn the device on you will be prompted to enter the sim unlock code. 3.) Enter the unlock code and your device will be unlocked.
Of course it's turned out to be way less simple than that. My most obvious problem is with step #2. I am never prompted to enter the sim unlock code and instead only receive the message "Invalid Sim card."
Okay here is a back story if you want more details: I am on a family plan with AT&T right now that I believe is a good deal and would not like to switch carriers, although AT&T hires some of the biggest idiots I've ever encountered to work in their retail stores and tech support. I have been tempted to switch to Sprint because throughout all of this they have been the only ones to give me straightforward information and any help at all so far.
The Galaxy S5 in my possession meets all of Sprint's requirements to be unlocked and the previous owner received the unlock code directly from Sprint. It should be good to go.
I went to AT&T retail store with the locked device and unlock code for assistance and to make sure the process would go smooth and easy. The first time I was told it's impossible to sim unlock a phone and all I can do is sell the phone on eBay. I called tech support after this and they told me my problem was that I was using the AT&T sim card from my old HTC One, that SIM Card would be incompatible with the Samsung, so therefore I am receiving an "Invalid Sim card" error. The second time I went in I requested a sim card for a Samsung Galaxy S5 because AT&T tech support told me the SIM card in my HTC will not work. The dude grabbed an empty SIM card and gave it to me without asking me for my information or anything about my account and when I asked him about this he told me that it's not necessary, "SIM cards don't have any memory or carry any information on them for the phone to read other than what service the phone is supposed to use". I honestly don't know much about cell phone technology but I knew this was bull**** but he was no further help after I told him I think he might be wrong about that. I called AT&T tech support and they told me that guy was an idiot and to go back to them and request another SIM card.
I don't want to go back into that stupid store until I'm absolutely sure what the **** I need to do to get this stupid phone to work with my AT&T account. Please educate me on how this process works and what the correct steps I need to take are. Thanks a million times in advance for whatever help you can give me, and again let me know if this is being asked in the wrong place I'm still new here.