Database Users

BootLoop - ZE500KL

Hi friends...
First of all, I'm sorry for my bad English.
So, my phone went to bootloop out of nowhere, no updates caused it, no root method either, just all the suddent... Went to bootloop.
Via recovery mode, I erase all user data & cache = Still BootLoop / Did not work.
Downloaded the firmware from the Asus website (concerning my model of the zenfone), also drivers & tools. So via adb installed it 100% = Still BootLoop / Did no work.
So, if anyone could be facing the same issue and solve it somehow, please let me know the way.
I've seen that this problem is a frequently issue in this phones, but, I haven't seen the solution for this Zenfone Laser 2 ZE500KL specifically.
Thanks in advance.

Place your downloaded full firmware in external sd card. Apply update through sd card in stock recovery.

Solved!
M Huzaifah said:
Place your downloaded full firmware in external sd card. Apply update through sd card in stock recovery.
Click to expand...
Click to collapse
Thanks buddy, it worked! did not have a clue that the ZE500KL carry that sd slot. LOL

Did not work for me

M Huzaifah said:
Place your downloaded full firmware in external sd card. Apply update through sd card in stock recovery.
Click to expand...
Click to collapse
hello
i have done something and finally removed the OS. now it says NO OS FOUND.
i have TWRP. i dont have access to fastboot mode.
when i flash a stock rom it says it is for ww phones. this phone is asus zooe- it is making this error.
do you know why i am unable to access to fastboot mode?
i have made some modifications to the updater script then successfully flashed but when i reboot stuck at the logo.
how to fix his please help me

stuck with no recovery mode
i need some help. my phone asus zenfone 2 laser ze500kl cant get into recovery mode and stuck at the asus logo screen. Cant detect the phone throw ADB in pc
Can someone help me?
Thanks

ricardosanto said:
i need some help. my phone asus zenfone 2 laser ze500kl cant get into recovery mode and stuck at the asus logo screen. Cant detect the phone throw ADB in pc
Can someone help me?
Thanks
Click to expand...
Click to collapse
Have u tried Fastboot mode.
Try
"fastboot devices"
If it does read ur device..Follow these steps
1.flash TWRP recovery
2.flash STOCK ROM
If flash fails open "update script" and remove "aseert" lines
DONE

stuck ze500kl
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
akhil850 said:
Have u tried Fastboot mode.
Try
"fastboot devices"
If it does read ur device..Follow these steps
1.flash TWRP recovery
2.flash STOCK ROM
If flash fails open "update script" and remove "asert" line
DONE
Click to expand...
Click to collapse
It doesn't detect/read my device.
How to make it.i enter fastboot mode on the phone it detects it like kedacom device on the device manager in the pc but in adb nothing.
What to do?

Not Detected devices to adb

this problem happen when i'm trying flash stock rom via adb sideload. im totally sure about the step from beginning, 'till the step of connecting my devices into adb using cmd.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
how can i flash if my device when it is cannot connect to adb?
i already installed the latest asus usb driver, intel android driver and pc link just in case. thank you, hoping your kindness for help.

Dis you enable usb debg?
Sent from my ASUS_T00J using Tapatalk

ZeeJcG said:
Dis you enable usb debg?
Sent from my ASUS_T00J using Tapatalk
Click to expand...
Click to collapse
yes, i already do that.

akbariz13 said:
this problem happen when i'm trying flash stock rom via adb sideload. im totally sure about the step from beginning, 'till the step of connecting my devices into adb using cmd.
how can i flash if my device when it is cannot connect to adb?
i already installed the latest asus usb driver, intel android driver and pc link just in case. thank you, hoping your kindness for help.
Click to expand...
Click to collapse
You need to switch phone to recovery mode, and put the firmware.zip inside adb folder.
Adb cmd : adb devices only work on fastboot mode.

You can try the Troubleshooting tab at Zenfone Assist

paktepu said:
You need to switch phone to recovery mode, and put the firmware.zip inside adb folder.
Adb cmd : adb devices only work on fastboot mode.
Click to expand...
Click to collapse
i think this step is clear and i'm sure do that thing :crying:

dgadelha said:
You can try the Troubleshooting tab at Zenfone Assist
Click to expand...
Click to collapse
checked, and the result is all the recomended drivers are installed. do you think my problem is because i already unlocked the bootloader and installed twrp? the reason why i'm going to use stock rom againis because of freezing issue (unlocked bootloader) and my camera not found (balck screen) :crying::crying:

akbariz13 said:
checked, and the result is all the recomended drivers are installed. do you think my problem is because i already unlocked the bootloader and installed twrp? the reason why i'm going to use stock rom againis because of freezing issue (unlocked bootloader) and my camera not found (balck screen) :crying::crying:
Click to expand...
Click to collapse
Hi,
You can restore a RAW firmware to go back to stock.

Cannot restore system, stuck on bootloop

Hey guys,
i recently bought a OP2 from Ebay which is bricked (Stuck on bootloop). The phone wasn't able to boot into Recovery. Only thing worked was Fastboot. I managed to get stock recovery to work using this Guide (Method 3):
https://forums.oneplus.net/threads/updated-28-06-2016-mega-unbrick-guide-for-a-hard-bricked-oneplus-2.347607/
Unfortunately it still stucks in a bootloop. I tryed flashing serveral Stock-ROM's. Does anyone know a solution to fix this?
ADB Sideload give me this output (everytime at around 94%)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm kind of new to this.
Greedings
Kynie

Make sure to update the fastboot/bootloader to the newer 3.0/hydrogenos version as all newer ROMs require this to boot.

How can i do this? I have stock bootloader v. 1.0 installed and not able to flash via fastboot cause the phone is locked. Cannot unlock because i'm not able to turn the phone on.

Then just use the standard Qualcomm flash-mode to restore the phone to factory OxygenOS 3.0.2. The utility and 3.0.2 full OTA zip required can be found in this forum if you search.

Then just use the standard Qualcomm flash-mode to restore the phone to factory OxygenOS 3.0.2. The utility and 3.0.2 full OTA zip required can be found in this forum if you search.
Click to expand...
Click to collapse
Thanks for the information. The OTA zip file do I have already. Sadly I can't find such an utility you are talking about. The only thing I found was a chineese (or I think it's chineese) tool which I already tryed but not worked. This tool just brings the stock recovery v 1.0 to life.
Or do you mean a diffrent tool?

In a similar position to you. Phone was working fine (only received it today and tried to get CM13 on it)
My bootloader is unlocked, but phone will no longer boot up, or go into recovery.
I can get it into FastBoot, but it doesn't show up anymore in ADB devices. When in fastboot, the device shows as "Android Device, Marshall London Bootloader interface"
If I switch the phone off and check Device manager it just shows as unknown device and then windows gives me an error message that its not functioning properly.
I have tried to follow this guide https://forums.oneplus.net/threads/...ck-guide-for-a-hard-bricked-oneplus-2.347607/
but it won't allow me to update the device driver, even if I turn off signature for drivers.
The only thing I can get to load is Fastboot. I did at one point have a little penguin on the screen, but haven't replicated that again.
Can anyone help? I'm pulling out my hair

Are you sure you didn't just boot it up into fastboot-ish mode? To be able to flash using that tool you mustn't boot up the phone, make sure it's of and hold volume up when connecting the USB cable, this way the phone will enter chinese factory flash mode at which you can flash using the chinese tool. Also the drivers require you to disable driver signature in windows to install since it's not signed.

Got it working in the end. I just ran the application without bothering with the USB driver stuff and it detected the phone. Then flashed the stock rom and it's now booted.
Still can't get CM13 installed, as I get the error 7 in recovery and that's what got me in the mess!
Sent from my ONE A2003 using Tapatalk

I turned driver signature of and installed drivers succesfully. I run the chineese tool and it finishes succesfully but the phone is still in bootloop. This is frustrating...

Hello do you have find à solution ??

unlock bootloader for v410

I was wondering if there was a way to unlock the bootloader on the v410 running 4.4.2. I have tried FreeGee and my device freezes and then restarts. I am rooted (TowelRoot) and have SuperSU and Busybox installed. I would like to be able to install TWRP recovery.

newbreedsoftware said:
I was wondering if there was a way to unlock the bootloader on the v410 running 4.4.2. I have tried FreeGee and my device freezes and then restarts. I am rooted (TowelRoot) and have SuperSU and Busybox installed. I would like to be able to install TWRP recovery.
Click to expand...
Click to collapse
I installed TWRP using flashify with no issues.. You might want to try that.

shilofax said:
I installed TWRP using flashify with no issues.. You might want to try that.
Click to expand...
Click to collapse
Which version TWRP are you using? Are you on kitkat? Trying to root and install TWRP

I am a newbie here. But I unlocked my device thru the carrier. What have you been able to use to unlocked boot loader? I have Lollipop 5.02 running on my device.

unlocking v410 bootloader
Repins55 said:
I am a newbie here. But I unlocked my device thru the carrier. What have you been able to use to unlocked boot loader? I have Lollipop 5.02 running on my device.
Click to expand...
Click to collapse
I have been fighting this for a couple of days. It seems that users are downgrading to a previous version 4 of Android in order to unlock the bootloader. I have been unable to make this work personally. Kingroot rooted 5.0.2, but the TWRP recovery ROM will not load. I think it's because the bootloader is still locked.

Yeah I'm having the same issue. If I flash the e9wifi .IMG recovery then boot recovery I get this fastboot screen which I've never seen on this vk410. I can't really use fast boot commands it seems not to respond well I know something is off I'm curious if its my headspace and timing or the tablets.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse

lg gpad v410 boatloader
i was able to root with 360
mine has boatloader removed
att has download mode where you might wipe
recovery with linux tools
and use fastboot, on my other phone commands wouldnt work, and it was non-writable
recently while trying to flash the kernel with anykernel2 it opted to fastboot mode, i havent tried any commands my pc is down
i extracted the boot.img after root
put the zlmage in a zip to flash the kernel i borrowed and it booted to fastboot mode
the zip file name is in the other post
id like to know if it works
thanks

No Command @ bootloader
Ive got the LG Uk 410 i flashed the firmware years ago. Im trying to get into the bootloader to cleanwipe so i can upgrade to a more recent CM but bootloader says no command. Ive tried power button, pwr vol up, pwr vol dwn, vol dn & up but i cant get past it can anyone please help? Need to get to clean wipe

one I had boatloader non-functional
but had twrp and rooting/no kernel flashing

Problem, critical error! no recovery,no download mode!

hi,
my english is bad ^^'
ihave Problem,
critical error !
fastboot mode started
no recovery,no download mode
LG G2 D801 (T-Mobile)
I can not do Flash using LGFlashTool2014
I will explain the reason in detail:
Open twrp, then delete all the options accidentally:
(system + data+ internal storage + cache)
Image is for illustration only
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
help pls.. :'(

use this tool here
https://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076

mid95 said:
use this tool here
https://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Click to expand...
Click to collapse
Thank you,
I did this nothing happened
But remain on this situation for a long time!
Selection:
4. Fixed Utility.
1. Fixed fastboot mode started.
Copy all files to the fastboot folder

I best and only method here to fix your phone is using srktool. I was in the exact same situation recently and i fixed using this method.
1) boot into qhsusb_bulk mode
2) connect the phone to your computer and start srktool
3) after that you will be able to boot into DOWNLOAD and RECOVERY mode
4) make sure that you phone is d801. To check, see the back side of your motherboard. It will be written there.
5) download your phone's version's tot and dll files and flash it.

farhanshaikh671 said:
I best and only method here to fix your phone is using srktool. I was in the exact same situation recently and i fixed using this method.
1) boot into qhsusb_bulk mode
2) connect the phone to your computer and start srktool
3) after that you will be able to boot into DOWNLOAD and RECOVERY mode
4) make sure that you phone is d801. To check, see the back side of your motherboard. It will be written there.
5) download your phone's version's tot and dll files and flash it.
Click to expand...
Click to collapse
I did this before, since they were showing me hard disks "15"

hi all,
The problem was solved and my phone was fixed ?
That's all I've done to fix the phone
1- Follow up on this subject until phase 9
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
2- Download SRK Tool 2.1 Then open it.. (Follow the image above) here
link Download SRK Tool 2.1 :
https://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Then:
3- After successful flash of images, remove battery connector and other connectors and reattach buttonsplate.
4- After attaching buttons plate,check your device going into download mode, and use flash tool to flash stock rom..
-----------------------------------
Thanks mid95 + farhanshaikh671 for the replies ?
+
thanks george7565 for the subject and explanation ?
thanks somboons for the program ?
Finally, thank you XDA for the everything ❤