hi.
i have an unrooted moto g7 1962-5. unfortunately no recovery image available.
i tried already to flash with stock rom according the devices version : PPO29.114-135 reteu2.
unfortunately it does not work very stable and stubbles and freezes the monitor.
i flashed it with fastboot and rsd lite.. but the result is the same and did not improve the function of the phone.
i tried as well to update the phone with lenovo assistent. it connects the phone to the software. but when device connected and selected it comes to the information : device not matching , please re-connect.
how can i proceed to get the device back to normal function
thank you in advance.
https://mirrors.lolinet.com/firmware/moto/river/official/RETEU/
moto g7 1962-5 reteu2
i downloaded stock from this site already. but it doesn´t work as i want to.
to my device:
it´s reteu2 .does it get in conflict with these stock roms?
can i install any of those 1962-5 ppos29 114 34 -x
what is the best way fo flash . rsd lite or fastboot?
is it at least possible to lock the bootloader to get further updates OTA
123michael123 said:
i downloaded stock from this site already. but it doesn´t work as i want to.
to my device:
it´s reteu2 .does it get in conflict with these stock roms?
can i install any of those 1962-5 ppos29 114 34 -x
what is the best way fo flash . rsd lite or fastboot?
is it at least possible to lock the bootloader to get further updates OTA
Click to expand...
Click to collapse
I prefer RSD Lite, but no method is perfect.
Did you try a factory reset?
Was device in fastboot mode when you tried LMSA?
If bootloader is locked, don't downgrade firmware version, or change software channel.
Can you get to settings/dev options?
Sent from my ali using XDA Labs
sd_shadow said:
I prefer RSD Lite, but no method is perfect.
Did you try a factory reset?
Was device in fastboot mode when you tried LMSA?
If bootloader is locked, don't downgrade firmware version, or change software channel.
Can you get to settings/dev options?
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
I tried Fastboot mode and as well power off. Same result with device not supported in lmsa
Bootloader is unlocked.
You mean settings in the phone when device is on ?
sd_shadow said:
I prefer RSD Lite, but no method is perfect.
Did you try a factory reset?
Was device in fastboot mode when you tried LMSA?
If bootloader is locked, don't downgrade firmware version, or change software channel.
Can you get to settings/dev options?
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
so i downloaded the right software ..
when i connect to rsd lite phone get detected.
can´t decompress .. GET DECOMPRESS FILE SIZE ERROR...
tried to download .. same result..
what can i improve?
sd_shadow said:
I prefer RSD Lite, but no method is perfect.
Did you try a factory reset?
Was device in fastboot mode when you tried LMSA?
If bootloader is locked, don't downgrade firmware version, or change software channel.
Can you get to settings/dev options?
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
I tried Fastboot mode and as well power off. Same result with device not supported in lmsa
Bootloader is unlocked.
You mean settings in the phone when device is on ?
123michael123 said:
so i downloaded the right software ..
when i connect to rsd lite phone get detected.
can´t decompress .. GET DECOMPRESS FILE SIZE ERROR...
tried to download .. same result..
what can i improve?
Click to expand...
Click to collapse
Could be a bad download,
But you could unzip the file and select the service xml with RSD Lite.
Sent from my ali using XDA Labs
---------- Post added at 04:04 AM ---------- Previous post was at 04:03 AM ----------
123michael123 said:
I tried Fastboot mode and as well power off. Same result with device not supported in lmsa
Bootloader is unlocked.
You mean settings in the phone when device is on ?
Click to expand...
Click to collapse
Yes when device is on.
Sent from my ali using XDA Labs
sd_shadow said:
I prefer RSD Lite, but no method is perfect.
Did you try a factory reset?
Was device in fastboot mode when you tried LMSA?
If bootloader is locked, don't downgrade firmware version, or change software channel.
Can you get to settings/dev options?
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Ok. I managed it .
Unpacked the stock and flashed it with rsd lite . Great. Thanks a lot for this.
So is there a chance then to lock the bootloader? After the installation of it I could do update of the system. After reboot popped up a message. System corrupted... Update not possible.
sd_shadow said:
I prefer RSD Lite, but no method is perfect.
Did you try a factory reset?
Was device in fastboot mode when you tried LMSA?
If bootloader is locked, don't downgrade firmware version, or change software channel.
Can you get to settings/dev options?
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
finally I made it.
i used the right software from lolinet.
unpacked and then afterwards flashed the flashfile with rsd lite.
then i connected the device again to the motorola rescue assitant in fastboot mode.
it found the actual android 10 version and updated the system. after the flashing process
the phone rebooted normal and works since then quickly and perfekt.
i would like to lock the bootloader now.. how about this to do
123michael123 said:
finally I made it.
i used the right software from lolinet.
unpacked and then afterwards flashed the flashfile with rsd lite.
then i connected the device again to the motorola rescue assitant in fastboot mode.
it found the actual android 10 version and updated the system. after the flashing process
the phone rebooted normal and works since then quickly and perfekt.
i would like to lock the bootloader now.. how about this to do
Click to expand...
Click to collapse
See locking bootloader link
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my Moto E (4) using Tapatalk
sd_shadow said:
See locking bootloader link
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
hi ... that did the trick . .great . thank you very much..
Que tal mi moto g7 xt1962-6 se dañó el archivo boot.img y no me deja arrancar el teléfono alguien que tenga la ROM oficial con Android 10 para volver a flashear con fastboot la ROM debe de ser river
Related
Hi,
My brother got a USB-logo on his phone and I flashed a new bootloader using XFSTK, but I noticed he got a ZE550ML and not the ZE551ML that I flashed on his phone. Now the phone is stuck on fastboot screen. I got it to load the USB-logo screen one time, and flash it with the correct ZE550ML bootloader files, but it still shows wrong model and wrong serial number.
Does anyone have a solution to fix it?
Best regards.
im trying ther same thing, but for somereason adb doesnt list my device now..
If you're in bootloader you use fastboot not adb
Sent from my ASUS_Z00A using Tapatalk
Yes, flashing done not require adb, in fastboot mode only fastboot command works.
Sent from my Moto G 2014 using XDA-Developers mobile app
neeraj.lambaa said:
Yes, flashing done not require adb, in fastboot mode only fastboot command works.
Sent from my Moto G 2014 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, that is correct, but as I said, my phone has been flashed a bootloader for a different Zenfone than I have.
Using fastboot command.
Flash correct boooader or flash stock firmware, or extract bootloader content from stock firmware.
Sent from my Moto G 2014 using XDA-Developers mobile app
neeraj.lambaa said:
Using fastboot command.
Flash correct boooader or flash stock firmware, or extract bootloader content from stock firmware.
Sent from my Moto G 2014 using XDA-Developers mobile app
Click to expand...
Click to collapse
Okey, but how to do that? The phone does not have the correct serialnumber now that the wrong bootloader is loaded onto the phone, only the 12345.. serialnumber.
Serial number 123 etc is perfectly normal after flashing in xfstk
see my signature below for video to correct
---------- Post added at 10:25 AM ---------- Previous post was at 10:01 AM ----------
If anyones flashed incorrect files across devices -- get correct files - reload xfstk
press dload.
power plus vol+ to two buzzes - release
if no good
repeat till success
Try to...
repeat power plus vol+ after two buzzes immediately after the two buzzes too, before the dowloader cycles to #20
Basically, try to fit in two cycles before the attempt to #20 completes
Hey guys,
i've a massive problem with my G4. Today i flashed TWRP on the device, after i was unlocking the bootloader. After booting up into TWRP, and installing SuperSU, I just restarted it. Now it's dead. Seriously, it's dead.
I can't start it at all. If I plug in a USB-Cable, i just see the LED Light. I've Windows, and at my Device Manager, the G4 is recognized as QHSUSB_BULK.
I saw a Thread for the Moto G (1th), and i'm pretty sure, that i can't to this like in this tutorial:
http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Is there any option, what i can do?
@Marwycy are you able to boot into bootloader and TWRP..?
Keep volume and power key pressed for about 2 minutes,
And then if you made any backup restore it, otherwise flash stock...
__Madddy said:
@Marwycy are you able to boot into bootloader and TWRP..?
Keep volume and power key pressed for about 2 minutes,
And then if you made any backup restore it, otherwise flash stock...
Click to expand...
Click to collapse
At first i wasn't but, i found a thread with a solution:
http://forum.xda-developers.com/moto-g4-plus/help/help-xt1642-hard-bricked-help-t3498943
Now i can boot into the Bootloader, i deleted TWRP with fastboot, to flash the stock firmware from the motorola support site.
But its not working yet.
After "fastboot flash -S 1900M system system.img" I just get the error: "cannot load system.img". If I just use "fastboot flash -S 1800 system system.img", fastboot is going to flash, but stopped with the error:"(bootloader) data size exceeds download buffer. The last error seems to be logical, the file is bigger than 1800MB..
I'll try to flash each files which are in the image.
Marwycy said:
At first i wasn't but, i found a thread with a solution:
http://forum.xda-developers.com/moto-g4-plus/help/help-xt1642-hard-bricked-help-t3498943
Now i can boot into the Bootloader, i deleted TWRP with fastboot, to flash the stock firmware from the motorola support site.
But its not working yet.
After "fastboot flash -S 1900" I just get the error: "cannot load system.img". If I just use "fastboot flash -S 1800 system system.img", fastboot is going to flash, but stopped with the error:"(bootloader) data size exceeds download buffer. The last error seems to be logical, the file is bigger than 1800MB..
Click to expand...
Click to collapse
Are you sure your downloaded firmware is correct with your phone model no. and carrier..?
For Flashing Stock,
Follow this thread, post 4 (restore to stock)
http://forum.xda-developers.com/moto-g4-plus/how-to/guide-newbie-resource-thread-t3386584
__Madddy said:
Are you sure your downloaded firmware is correct with your phone model no. and carrier..?
For Flashing Stock,
Follow this thread, post 4 (restore to stock)
http://forum.xda-developers.com/moto-g4-plus/how-to/guide-newbie-resource-thread-t3386584
Click to expand...
Click to collapse
I tried it, i can't open system.img at all. So i can't extract anything..
Marwycy said:
I tried it, i can't open system.img at all. So i can't extract anything..
Click to expand...
Click to collapse
System.img ???
Are you trying to flash "dumped system" ...??
It will not get flashed that way, you need to download complete firmware, download links are there on which link I provided first..
Download correct firmware and follow that guide..
__Madddy said:
System.img ???
Are you trying to flash "dumped system" ...??
It will not get flashed that way, you need to download complete firmware, download links are there on which link I provided first..
Download correct firmware and follow that guide..
Click to expand...
Click to collapse
Sorry, i was a bit confused because of this large list of commands:
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash system system.img_sparsechunk.6
mfastboot flash system system.img_sparsechunk.7
Click to expand...
Click to collapse
And i figured out, that it's not necessary. All I had to do ist following the official way by just using "fastboot system system.img" , with the Image from the officla Motorola website. My first file was corrupt, that was the problem.
Now my phone is working again
Thanks for help.
Marwycy said:
Now my phone is working again
Click to expand...
Click to collapse
For Rooting, don't flash zip directly,
Follow this guide, https://forum.xda-developers.com/moto-g4-plus/how-to/root-systemless-rooting-supersu-2-74-2-t3405772
Take BACKUP, if anything wrong then RESTORE it...
first upgrade to 7.0 bro then go ahead with rooting .
say me if want any help??
Sent from my Moto G4 Plus using Tapatalk
---------- Post added at 04:16 AM ---------- Previous post was at 04:11 AM ----------
http://cloud.tapatalk.com/s/586730a47ebfa/superuser.zip
on nougat .use this SuperSU file after flashing twrp 3.0.2.0 as before and install phh superuser from playstore
Sent from my Moto G4 Plus using Tapatalk
parth00790 said:
on nougat .use this SuperSU file after flashing twrp 3.0.2.0 as before and install phh superuser from playstore
Click to expand...
Click to collapse
Please, provide complete information, no root method is working on latest (official) Nougat, your half information can brick other's phone and can put them in trouble...
i have used with rooted nougat
just same method for Twrp
enable usb debugging and flash twrp using adb .
then flash superuser.zip provided in previous comment and install phh superuser from playstore .
you are done bro .
i have tried and working
Sent from my Moto G4 Plus using Tapatalk
moto g4 plus brick
can u please tell me where did u get moto g4 plus official stock rom.
and how do u flash into phone.
bro please give me full details :crying:
djsusant said:
can u please tell me where did u get moto g4 plus official stock rom.
and how do u flash into phone.
bro please give me full details :crying:
Click to expand...
Click to collapse
Calm down. Read this.
Wrong, delete please
Ayuda/Help
Hola me podrias ayudar tengo el moto g4 xt1621, lo que sucedio fue que estaba flasheando eol parche de seguridad de 7.0 no recuerdo si era de diciembre o de marzo pero cuando acabo le di en reboot system now pero no prendio mas, solo prende el led y la pc lo reconoce ya instale los drivers pero me da error quisiera saber si me podrias ayudar a fondo a recuperar mi moto g4, disculpa pero lo pongo en ingles y español pero no hablo ingles uso el traductor, ayudame porfavor
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hello, you could help me I have the moto g4 xt1621, what happened was that it was full of eolo security patch 7.0 I do not remember if the era of December of March but when the reboot system finished now but I did not turn on anymore, just turn on the led And the pc recognizes it and install the drivers but it gives me error I would like to know if you could help me thoroughly to recover my bike g4, I apologize but I put it in English and Spanish but I do not speak English I use the translator, help me please
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
TioHenry said:
Hello, you could help me I have the moto g4 xt1621, what happened was that it was full of eolo security patch 7.0 I do not remember if the era of December of March but when the reboot system finished now but I did not turn on anymore, just turn on the led And the pc recognizes it and install the drivers but it gives me error I would like to know if you could help me thoroughly to recover my bike g4, I apologize but I put it in English and Spanish but I do not speak English I use the translator, help me please
Click to expand...
Click to collapse
Okay -
1)Firstly, what were you doing when you rebooted - were you installing an update? If so, do you remember what the update was (what number did it end in, for example)?
2)Have you tried holding the power button for 2 minutes? This may force a hard reboot and could break your device out of the state it's in.
3)When you plug your device into your computer, what is the device name that comes up (e.g. is it Moto G4 Plus in Device Manager>Portable Devices or Qualcomm HSUSB 9008 or similar)?
4)What error message did you get?
5)Is your device with an unlocked bootloader or locked bootloader?
echo92 said:
Okay -
1)Firstly, what were you doing when you rebooted - were you installing an update? If so, do you remember what the update was (what number did it end in, for example)?
2)Have you tried holding the power button for 2 minutes? This may force a hard reboot and could break your device out of the state it's in.
3)When you plug your device into your computer, what is the device name that comes up (e.g. is it Moto G4 Plus in Device Manager>Portable Devices or Qualcomm HSUSB 9008 or similar)?
4)What error message did you get?
5)Is your device with an unlocked bootloader or locked bootloader?
Click to expand...
Click to collapse
1) I do not remember well
2) I already tried it with volume down and power button plus the charger connected
3) When I connect it to the pc it is recognized by Qualcomm
4) I do not remember, since I have several
5) If you had the bootloader unlocked
TioHenry said:
1) I do not remember well
2) I already tried it with volume down and power button plus the charger connected
3) When I connect it to the pc it is recognized by Qualcomm
4) I do not remember, since I have several
5) If you had the bootloader unlocked
Click to expand...
Click to collapse
Okay, point 3 indicates that you perhaps need to try resetting your phone with a blankflash: you may wish to have a look at this post https://forum.xda-developers.com/showpost.php?p=71405834&postcount=23 Please read all the steps fully before proceeding if you choose to follow that post. I recall you've posted in the hard brick thread too, which has similar instructions, perhaps this may work.
I do not know if this will work, but it's worth a try.
HELP me
Can you give me the link of stock rom for Moto G4 XT1624
I've just updated my Axon 7 A2017G to Android Nougat using the official update file from ZTE. After the update I wasn't able to start fastboot. (The device would just reboot) So I've installed TWRP using EDL and flashed the A2017G_N_Modem.zip from this link: https://www.androidfilehost.com/?w=files&flid=148464
But fastboot is still not working. Any ideas how to fix this?
Thenetstriker said:
I've just updated my Axon 7 A2017G to Android Nougat using the official update file from ZTE. After the update I wasn't able to start fastboot. (The device would just reboot) So I've installed TWRP using EDL and flashed the A2017G_N_Modem.zip from this link: https://www.androidfilehost.com/?w=files&flid=148464
But fastboot is still not working. Any ideas how to fix this?
Click to expand...
Click to collapse
I come here to ask if its possible to install twrp after upgrade and see that you have done it. Its possible to do even if I didnt do it before with android 6? so my bootloader is locked...
thanks
pelelademadera said:
I come here to ask if its possible to install twrp after upgrade and see that you have done it. Its possible to do even if I didnt do it before with android 6? so my bootloader is locked...
thanks
Click to expand...
Click to collapse
My bootloader is unlocked and I flashed TWRP using EDL. I don't know if this is possible with locked bootloader.
Hi,
Download: build.nethunter.com/misc/axon7/A2017U_FASTBOOT_UNLOCK_EDL.zip
, extract the folder "A2017U_FASTBOOT_UNLOCK_EDL" and flash it with Miflash under EDL after fastboot will work.
damboc said:
Hi,
Download: build.nethunter.com/misc/axon7/A2017U_FASTBOOT_UNLOCK_EDL.zip
, extract the folder "A2017U_FASTBOOT_UNLOCK_EDL" and flash it with Miflash under EDL after fastboot will work.
Click to expand...
Click to collapse
https://forum.xda-developers.com/axon-7/how-to/guide-reinstall-twrp-root-update-to-t3578552
pelelademadera said:
https://forum.xda-developers.com/axon-7/how-to/guide-reinstall-twrp-root-update-to-t3578552
Click to expand...
Click to collapse
alto nombre de usuario
Fastboot mode has been stripped from Nougat roms.
rikin93 said:
Fastboot mode has been stripped from Nougat roms.
Click to expand...
Click to collapse
Define stripped? If it's not included in an update, then it's using the fastboot that was previously installed.
B15 update file from Zte includes fastboot.img.
gpz1100 said:
Define stripped? If it's not included in an update, then it's using the fastboot that was previously installed.
B15 update file from Zte includes fastboot.img.
Click to expand...
Click to collapse
Lol b15? the post is about the G version. A2017G hasn't got Fastboot. You have to flash a package with MiFlash like I explained on my post to obtain fastboot...
Thenetstriker said:
My bootloader is unlocked and I flashed TWRP using EDL. I don't know if this is possible with locked bootloader.
Click to expand...
Click to collapse
How did you flash TWRP via EDL? I have an A2017 on the latest 7.1.1 B13 firmware and an unlocked bootloader (which I unlocked in MM), but I can't get Fastboot to work (e.g. by flashing A2017U_FASTBOOT_UNLOCK_EDL via EDL), so was hoping just to flash TWRP manually in EDL.
I'd be very interested to hear what you did to get a working TWRP on 7.1.1!
Mike
U can flash TWRP using EDL with axon7tool
Send from ZTE A2017G using Tapatalk
mwarner said:
How did you flash TWRP via EDL? I have an A2017 on the latest 7.1.1 B13 firmware and an unlocked bootloader (which I unlocked in MM), but I can't get Fastboot to work (e.g. by flashing A2017U_FASTBOOT_UNLOCK_EDL via EDL), so was hoping just to flash TWRP manually in EDL.
I'd be very interested to hear what you did to get a working TWRP on 7.1.1!
Mike
Click to expand...
Click to collapse
I just flashed TWRP using the axon7tool in EDL mode. But I didn't try if Android was still working and just restored a Backup of Android 6.
Salve! As you may know, Xiaomi enabled ARB (Anti-Roll Back) for Mi 6X starting with MIUI 10. It means that if you try to downgrade from MIUI 10 to MIUI 9, your device will enter in a brick EDL state and the only way to recover it is to send it to Xiaomi or flash it using MiFlash and an Authorized Account. Now if you are like me and have a locked bootloader in a converted a2 to 6x wayne then the only way is testpoint and even if your device has an unlocked bootloader doing fastboot oem edl is very unlikely to work
Now, as I read here on XDA, there are some people who managed to brick their device by triggering the ARB when they converted the Mi A2 to Mi 6X to test MIUI. So if you flashed MIUI 10 and didn't deleted firmware-update from the .zip file, you triggered the ARB. If you tried to flash MIUI 9 or stock Mi A2 ROM, you managed to brick your device and it stays in an EDL state (Qualcomm 9008). You SIMPLY CANNOT rollback to Android One yet until they introduce ARB to that device too but you can revive your device very easy with test point but no need for Mi Authorized Account. Sorry it has to be this way but this is the only way took me about 8 times to try and finally someone showed me this file which helped
https://drive.google.com/uc?export=download&id=1wAqlpmxMdZpibzPBuyBEwOY9ggcifAdd - This has everything include including the xiaomiflash no patched files are required as they have already been modified to bypass edl authentication i would also turn your wifi off whilst flashing this as thats what worked for me..weird eh?
Credits go to Sunchai - Admin of Mi Max Thailand for creating this amazing bypass
https://ibb.co/fYYmq0P
https://ibb.co/rd81JfK
These are screenshots of everything working so yeah , also if you are a2 user converted when you install the pie beta via the older beta version enhance lowlight photo automatically is fixed
My device is mi 6x and arb var : 4, unlocked bootloader. Currently I'm using havoc rom. Is this possible to go back to official china dev rom without bricking the device?
faisal1hd2 said:
My device is mi 6x and arb var : 4, unlocked bootloader. Currently I'm using havoc rom. Is this possible to go back to official china dev rom without bricking the device?
Click to expand...
Click to collapse
Yeah it won't brick click the clean all not clean all and lock unless that's what you want try with fastboot oem edl however users have reported that opening the device works
Quantumkk123 said:
Yeah it won't brick click the clean all not clean all and lock unless that's what you want try with fastboot oem edl however users have reported that opening the device works
Click to expand...
Click to collapse
You're are saying to try fastboot oem edl first, if it doesn't work then open device and use test point, right?
faisal1hd2 said:
You're are saying to try fastboot oem edl first, if it doesn't work then open device and use test point, right?
Click to expand...
Click to collapse
Yup
@Quantumkk123 It's work if my device is bricked ? (reboot to edl automatically, Mi A2 triggered ARB 4 for be a true Mi 6X)
Mashrmallow said:
@Quantumkk123 It's work if my device is bricked ? (reboot to edl automatically, Mi A2 triggered ARB 4 for be a true Mi 6X)
Click to expand...
Click to collapse
If you open up the device two pin it and install everything specific to that folder including version of xiaomiflash etc, this could help save you from the brick
Quantumkk123 said:
If you open up the device two pin it and install everything specific to that folder including version of xiaomiflash etc, this could help save you from the brick
Click to expand...
Click to collapse
Ok but after unbrick my device, can I install xiaomi.eu MIUI 10 stable or weekly rom for Mi 6X ?
Mashrmallow said:
Ok but after unbrick my device, can I install xiaomi.eu MIUI 10 stable or weekly rom for Mi 6X ?
Click to expand...
Click to collapse
Depends if your bootloader is unlocked, yes if not only can go for pie beta stock cn
Quantumkk123 said:
Depends if your bootloader is unlocked, yes if not only can go for pie beta stock cn
Click to expand...
Click to collapse
My bootloader is unlocked and I can Install MIUI 10 stable V10.2.3.0.ODCCNXM_v10-8.1 (Oreo 8.1.0) by Xiaomi.eu if I wipe data, cache and dalvik's/ART cache
Mashrmallow said:
My bootloader is unlocked and I can Install MIUI 10 stable V10.2.3.0.ODCCNXM_v10-8.1 (Oreo 8.1.0) by Xiaomi.eu if I wipe data, cache and dalvik's/ART cache
Click to expand...
Click to collapse
Yeah
@Quantumkk123 I got this error: Your not autorized to download
ERROR
download the rom that you left, but when flashing it tells me " you are not authorized to download"
arnuvi said:
download the rom that you left, but when flashing it tells me " you are not authorized to download"
Click to expand...
Click to collapse
Lmao no one is doing it properly follow the instructions carefully and properly turn off WiFi/ethernet before you click on xiaomiflash and make sure you use one provided as well as that clear and delete and version of miflash previously installed on your PC
FAIL
https://ibb.co/X5ZJhF7
I did what you said but it is still giving error
arnuvi said:
https://ibb.co/X5ZJhF7
I did what you said but it is still giving error
Click to expand...
Click to collapse
Is your phone opened because if it isn't thats why it works for so many others but for you it doesn't there is something wrong your doing here
confirm, it works. boot to fastboot with bootloader unlocked. turn internet connection off. use the miflash provided with the rom.
Surely you wilm be.return to miui v.8.2.23, then able to update to v9.3.21 Pie
stevedat said:
confirm, it works. boot to fastboot with bootloader unlocked. turn internet connection off. use the miflash provided with the rom.
Surely you wilm be.return to miui v.8.2.23, then able to update to v9.3.21 Pie
Click to expand...
Click to collapse
my a2 does not enter fastboot mode, does not turn on only the pc recognizes it in edl mode, but when flashing the rom that they told me, it asks for account authentication
---------- Post added at 01:14 AM ---------- Previous post was at 01:11 AM ----------
Quantumkk123 said:
Is your phone opened because if it isn't thats why it works for so many others but for you it doesn't there is something wrong your doing here
Click to expand...
Click to collapse
I flashed the rom that led me to the problem by recovery that was miui 9 8.1, while I was in miui 10, after that I rebooted the cel, and did not want to restart it I enter in a way that only the pc recognizes it by edl, but when flashing the rom that you gave me stays in account authentication my flash
arnuvi said:
my a2 does not enter fastboot mode, does not turn on only the pc recognizes it in edl mode, but when flashing the rom that they told me, it asks for account authentication
---------- Post added at 01:14 AM ---------- Previous post was at 01:11 AM ----------
I flashed the rom that led me to the problem by recovery that was miui 9 8.1, while I was in miui 10, after that I rebooted the cel, and did not want to restart it I enter in a way that only the pc recognizes it by edl, but when flashing the rom that you gave me stays in account authentication my flash
Click to expand...
Click to collapse
the thread.says.its self as passby edl auth. it doesnt mean to save bricked phones.
Hello, my nokia 6 on oreo is actually stuck at the "Powered by android" screen after uninstalling Magisk, i can access to fastboot, so i can flash files, but my bootloader isn't unlocked and OST LA won't work and i don't know why, can someone help me ? I think i just need to flash a stock boot.img, but i can't.
Hello, i somehow managed to flash a stock boot.img, my phone is still stuck at the same screen, but it's now recognized by the pc (it wasn't before), can someone have an idea to help me ? Thanks.
Yakia said:
Hello, my nokia 6 on oreo is actually stuck at the "Powered by android" screen after uninstalling Magisk, i can access to fastboot, so i can flash files, but my bootloader isn't unlocked and OST LA won't work and i don't know why, can someone help me ? I think i just need to flash a stock boot.img, but i can't.
Click to expand...
Click to collapse
OST can flash Nokia phones if the bootloader is already unlocked.
I think you'll have to buy an unlocking key first. (on techmesto for example)
I can actually flash without OST LA, like I said, but normally flashing stock boot.img should have fixed the problem, but it's still stuck on the same screen.
Yakia said:
I can actually flash without OST LA, like I said, but normally flashing stock boot.img should have fixed the problem, but it's still stuck on the same screen.
Click to expand...
Click to collapse
Flash boot.img of stock rom and flash recovery.img of the same custom rom on which your phone is running maybe it would help you.
What are you talking about, I already flashed a stock boot.img, and my phone is not running on a custom rom...
Yakia said:
What are you talking about, I already flashed a stock boot.img, and my phone is not running on a custom rom...
Click to expand...
Click to collapse
I don't really understand how you installed magisk without recovery custom ?
I found this but I don't know if it works ^^
https://www.didgeridoohan.com/magisk/MagiskUninstallIssues
arl0ng said:
OST can flash Nokia phones if the bootloader is already unlocked.
I think you'll have to buy an unlocking key first. (on techmesto for example)
Click to expand...
Click to collapse
No you dont need an unlocked bootloader to flash with OST LA just make sure you flash with the older version as the newer version will hang but it works with my nokia 5 and the bootloader is locked
nintendobuster420 said:
No you dont need an unlocked bootloader to flash with OST LA just make sure you flash with the older version as the newer version will hang but it works with my nokia 5 and the bootloader is locked
Click to expand...
Click to collapse
yes but after i flashed stock boot.img i'm not able to boot in fastboot mode do you know how i can do that ?
arl0ng said:
I don't really understand how you installed magisk without recovery custom ?
I found this but I don't know if it works ^^
https://www.didgeridoohan.com/magisk/MagiskUninstallIssues
Click to expand...
Click to collapse
i did install magisk with the chinese twrp but uninstalled it from the magisk manager app and after uninstalling it it was just stuck at the powered by android screen
Yakia said:
yes but after i flashed stock boot.img i'm not able to boot in fastboot mode do you know how i can do that ?
Click to expand...
Click to collapse
Does your phone boot into EDL mode? If it boots to EDL mode then it could be fixable. If not then it could be hard bricked
nintendobuster420 said:
Does your phone boot into EDL mode? If it boots to EDL mode then it could be fixable. If not then it could be hard bricked
Click to expand...
Click to collapse
i don't think its on edl mode, how can i know that ? and how can my phone be hard bricked just because i just uninstalled magisk ? uninstalling magisk simply restore stock boot.img and remove root. and i don't think it would show a powered by android screen or a charging screen if it was hard bricked, and thanks for you help people by the way.
bump, i still have access to fastboot mode, so i can flash things, can someone help me please ?
Yakia said:
bump, i still have access to fastboot mode, so i can flash things, can someone help me please ?
Click to expand...
Click to collapse
Download Android nougat 7.1.1 nbo file from xda if your phone is able to enter in download mode connect it to pc via cable and hit on next button and flash firmware again
And if you flashed firmware successfully then always remember not to flash Chinese recovery again u should thanks to god , it's not hard bricked it's only soft bricked flash it through ost la tool patched ost for more you can search on search bar how to setup patched ost la
which ost la version do i need to use ? 6.1.2 or 6.0.4 ?
thank you for your answer btw.
Yakia said:
which ost la version do i need to use ? 6.1.2 or 6.0.4 ?
Click to expand...
Click to collapse
6.0.4 patched ost la
which nbo file do i have to use ? the one i'm using gives me this error : the update process failed, the software version of the updater is out of date please upgrade the updater and then try again
bump
Yakia said:
which nbo file do i have to use ? the one i'm using gives me this error : the update process failed, the software version of the updater is out of date please upgrade the updater and then try again
Click to expand...
Click to collapse
have you replaced the exe in windows drive:\program files (x86)\OST LA\ with the patched one