Related
Hey there, hope y'all are doing well.
I recently purchased a Samsung Galaxy S7 SM-G930V, Nougat 7.0 (note: I live in europe, and it's an unlocked phone). I want to get rid of Verizon logo while booting and all the unnecessary apps connected with Verizon. Plus, as you know Verizon locks some functions like the device maintenance, turning off the backlight of the capacitive buttons, etc, etc.
So, I'd like to have a clean/untouched samsung firmware without any useless apps.
Is androidfilehost.com trustworthy? what about updato.com? (the latter had slow dl speed, and I stumbled upon the first alternative)
PS. by the way, mine reads G930VVRS4BQI1, so one thing that confused me was while loking up for files to download; should I get the G930VVRS4BQI1 which may be the only compatible file for my phone, or do I already have G930VVRS4BQI1, so downloading it would be useless?
Since I wouldn't like to tinker often with the phone system, what do you suggest, flashing or rooting?
Is there any guide for my case for flashing?
I noticed these two on the front page:
---[Rom] [Ufirm_QD2_Hybrid_Nougat_Rom_FlashFire_Install][Status Official For VZW S7FLAT]Last edited by CVertigo1; 25th September 2017
---[Rom] [Verizon_TMO_Hybrid_Nougat_Rom_FlashFire_Install][Status Official] [S7flat]Last edited by CVertigo1; 26th May 2017 at 03:13 PM.
which should I pick?
and since the posts were last edited in may and september, where can I find the latest firmware?
and after doing all this, will everything work well, will I get OTA updates?
I would really appreciate someone helping me out, whenever you're free.
Thanks in advance
You can actually cross flash any Qualcomm s7 firmware between all carrier handsets. With your case being in Europe I would recommend the sm-G930U firmware. Which is the carrier unlocked variant of the S7 stateside that has all bands unlocked that the modem is capable of. You will recieve OTA's. It's Odin files are on Updato and SamMobile. AndroidHost is trustworthy.
In your case of not wanting to tinker or have a "need to have" rooted feature on the new device, I would flash the the 930U firmware and enjoy your new non branded system.
JediDru said:
You can actually cross flash any Qualcomm s7 firmware between all carrier handsets. With your case being in Europe I would recommend the sm-G930U firmware. Which is the carrier unlocked variant of the S7 stateside that has all bands unlocked that the modem is capable of. You will recieve OTA's. It's Odin files are on Updato and SamMobile. AndroidHost is trustworthy.
In your case of not wanting to tinker or have a "need to have" rooted feature on the new device, I would flash the the 930U firmware and enjoy your new non branded system.
Click to expand...
Click to collapse
Hey JediDru,
I also just bought the S7 Verizon variant, and am planning on using it on MetroPCS. Would you recommend the 930U firmware for me as well? I wouldn't mind getting rid of the Verizon bloat before I hand it over to my wife...
jbjcurly said:
Hey JediDru,
I also just bought the S7 Verizon variant, and am planning on using it on MetroPCS. Would you recommend the 930U firmware for me as well? I wouldn't mind getting rid of the Verizon bloat before I hand it over to my wife...
Click to expand...
Click to collapse
You very well could. I think there is a thread around here specifically about metropcs setup somewhere between the verizon s7 and tmobile s7 forums. I use my 930v flashed to 930U on tmobile.
JediDru said:
You can actually cross flash any Qualcomm s7 firmware between all carrier handsets. With your case being in Europe I would recommend the sm-G930U firmware. Which is the carrier unlocked variant of the S7 stateside that has all bands unlocked that the modem is capable of. You will recieve OTA's. It's Odin files are on Updato and SamMobile. AndroidHost is trustworthy.
In your case of not wanting to tinker or have a "need to have" rooted feature on the new device, I would flash the the 930U firmware and enjoy your new non branded system.
Click to expand...
Click to collapse
hey there, thanks for your advice! I downloaded the latest file from here. sammobile"dot"com/firmwares/galaxy-s7/SM-G930U/VZW/
In a moment I was clueless at the "pick country" since there were more than one USA options. so I went with verizon, since my phone comes from verizon.
In the link I mentioned above it reads this This is for SM-G930U from USA (Verizon) which makes no sense to me, how it can be both "U"-unlocked and verizon at the same time... but, oh well, I flashed it 4 days ago and I've encountered no problem, which is all that matters! Hope I made no mistake at picking that file.
Recently purchased galaxy S7 SMG-930V (Best buy version) from a private owner.
I am on cricket and on APN setup LTE and MMS works without issues. Only issue is that upon dialing USSD code i get 'Connection problem or Invalid MMI code' . I tried all options available mentioned in this forum still doesn't work. Which version of SM-G930U should i flash? Main reason i purchased the phone is for Samusing Pay. Don't want to brick or lose Samusing Pay option after flash.
Inputs are appreciated.
thricegreat said:
hey there, thanks for your advice! I downloaded the latest file from here. sammobile"dot"com/firmwares/galaxy-s7/SM-G930U/VZW/
In a moment I was clueless at the "pick country" since there were more than one USA options. so I went with verizon, since my phone comes from verizon.
In the link I mentioned above it reads this This is for SM-G930U from USA (Verizon) which makes no sense to me, how it can be both "U"-unlocked and verizon at the same time... but, oh well, I flashed it 4 days ago and I've encountered no problem, which is all that matters! Hope I made no mistake at picking that file.
Click to expand...
Click to collapse
Did it remove all the bloatware from Verizon?
Does Samsung pay works?
matrixddl said:
Did it remove all the bloatware from Verizon?
Does Samsung pay works?
Click to expand...
Click to collapse
Yes Flashing the G930U firmware removes all carrier bloat.
Samsung pay comes with the U firmware.
The last time I was on the U I had bad standby drain. I read somewhere else it has to do with the U not dozing correctly. They may very well have fixed it now, I'm on the latest tmobile 4BRA firmware and it sleeps like a baby right now.
JediDru said:
Yes Flashing the G930U firmware removes all carrier bloat.
Samsung pay comes with the U firmware.
The last time I was on the U I had bad standby drain. I read somewhere else it has to do with the U not dozing correctly. They may very well have fixed it now, I'm on the latest tmobile 4BRA firmware and it sleeps like a baby right now.
Click to expand...
Click to collapse
Flashed the verizon U firmware and it did remove all the bloatware. Still need to check on battery drain with Samsung Pay. All other apps are in "Always Sleeping Apps" for better battery performance.
For future reference make sure before flashing new firmware google accounts and lock screen securities are removed/disabled.
Is there a way to back up apps with user data and home screen and reuse instead of installing all over again when a new firmaware is flashed. Spoiled by the root and titanium full back. That was so easy.
matrixddl said:
Flashed the verizon U firmware and it did remove all the bloatware. Still need to check on battery drain with Samsung Pay. All other apps are in "Always Sleeping Apps" for better battery performance.
For future reference make sure before flashing new firmware google accounts and lock screen securities are removed/disabled.
Is there a way to back up apps with user data and home screen and reuse instead of installing all over again when a new firmaware is flashed. Spoiled by the root and titanium full back. That was so easy.
Click to expand...
Click to collapse
As far as I know, no. It's not so bad. I had gotten into the habit of taking screen shots of my app drawer and redownloading. To think now I can just redownload the configuration of apps I had before is as good as it gets. I still just redownload. I like to re-set everything back up just so I know its done.
I haven't tried this method but to backup and restore all installed apps check this Link.
matrixddl said:
I haven't tried this method but to backup and restore all installed apps check this Link.
Click to expand...
Click to collapse
Actually, if all you want to do is switch carriers (same GMail address), then a firmware swap will work.
I have an ex-Verizon (blacklisted IMEI - previous owner)S7 that I was moving to Tracfone (which uses both VZW and T-Mobile towers) - naturally, VZW was a non-starter; however, the UnCarrier was fine, so I used a T-Mobile nanoSIM (Tracfone triple-punch SIM kit includes SIMs from all except Sprint) and replaced the VZW firmware with T-M firmware (Prince Comsy ODIN does the track rather neatly). As long as your IMEI is not blacklisted from the TARGET, such a swap will always work.
Hey guys, first time on this forum and I am trying to figure things out. I never flashed a firmware so im a noob to this, but I can definitely follow along. Here is my main concern:
Seems like you need a T-Mobile device to get access to features like advanced messaging, visual voicemail, wifi calling, etc. Things I use all the time, but I never knew it would be taken away if I purchased an unlocked S10 plus.
My main goal is to get these features back, which from what I understand requires flashing the firmware? If there is any other way I am more than open to listen to it!
I have Odin and downloaded the "userdata" linked into this post: https://forum.xda-developers.com/galaxy-s10/how-to/g975u-g975u1-firmware-links-t3905897 specifically USERDATA_TMB_G975USQU1ASAT_CL15296297_QB21819666_REV00_user_low_ship_MULTI_CERT.zip
I figure I unzip to get the tar file, select Odin use data and only flash this file? Kinda clueless about all this.
In addition, if I were to flash I hope that Samsung Pay, Knox, finance apps will still work; also the warranty is still good. I know that rooting the device will/may make these unusable, but I just want to confirm.
Any guidance is greatly appreciated, thanks!
mdiddyshow said:
Hey guys, first time on this forum and I am trying to figure things out. I never flashed a firmware so im a noob to this, but I can definitely follow along. Here is my main concern:
Seems like you need a T-Mobile device to get access to features like advanced messaging, visual voicemail, wifi calling, etc. Things I use all the time, but I never knew it would be taken away if I purchased an unlocked S10 plus.
My main goal is to get these features back, which from what I understand requires flashing the firmware? If there is any other way I am more than open to listen to it!
I have Odin and downloaded the "userdata" linked into this post: https://forum.xda-developers.com/galaxy-s10/how-to/g975u-g975u1-firmware-links-t3905897 specifically USERDATA_TMB_G975USQU1ASAT_CL15296297_QB21819666_REV00_user_low_ship_MULTI_CERT.zip
I figure I unzip to get the tar file, select Odin use data and only flash this file? Kinda clueless about all this.
In addition, if I were to flash I hope that Samsung Pay, Knox, finance apps will still work; also the warranty is still good. I know that rooting the device will/may make these unusable, but I just want to confirm.
Any guidance is greatly appreciated, thanks!
Click to expand...
Click to collapse
WiFi Calling, VoLTE are working just fine, but I get what you mean... I mostly flashed 4 firmware files: BL, AP, CL and CSC and couple of times did flash USERDATA too. As userdata file was not required to be flashed unless you want all bloatware from the carrier. Don't know if S10 needs this "userdata" file. You would want to flash I mentioned and specifically flash CSC file and not the HOME CSC(as it usually retains user data on your phone) and in your case you want odin to wipe the device. I want to flash too, but waiting for firmware to become available on sammobile website
Charkatak said:
WiFi Calling, VoLTE are working just fine, but I get what you mean... I mostly flashed 4 firmware files: BL, AP, CL and CSC and couple of times did flash USERDATA too. As userdata file was not required to be flashed unless you want all bloatware from the carrier. Don't know if S10 needs this "userdata" file. You would want to flash I mentioned and specifically flash CSC file and not the HOME CSC(as it usually retains user data on your phone) and in your case you want odin to wipe the device. I want to flash too, but waiting for firmware to become available on sammobile website
Click to expand...
Click to collapse
Basically I should wait for Sammobile to upload those 4 firmware files (BL,AP,CL,CSC) and then use Odin to flash the firmware. Seems the instructions for that are really easy.
As far as the Samsung pay / finance apps, would it mess those up like rooting the device?
mdiddyshow said:
Basically I should wait for Sammobile to upload those 4 firmware files (BL,AP,CL,CSC) and then use Odin to flash the firmware. Seems the instructions for that are really easy.
As far as the Samsung pay / finance apps, would it mess those up like rooting the device?
Click to expand...
Click to collapse
There should be no issue with Samsung Pay and other apps, as you would be flashing official Samsung firmware. Wait for firmware files to be available and then you would be able to see which files will be included and go from there. On my unlocked S8, I didn't flash userdata file and still had all T-Mobile features you were mentioning. If with S10 we will have the same, then skipping userdata is better as the device is pretty much clean without unneeded apps
I installed T-Mobile's Visual Voicemail app from Play Store, and it works just fine. (Unlocked S10)
I did the same. Figured if I was paying outright might as well get an unlocked device. But the Samsung's from tmobile have the multi line function and I'm trying to get rid of my iPhone. But I use that number alot as well. So that multi line function built in for DIGITS worked for me. If you flash it let me know if it has it built in
Sent from my SM-G973U1 using Tapatalk
bradbutter said:
I did the same. Figured if I was paying outright might as well get an unlocked device. But the Samsung's from tmobile have the multi line function and I'm trying to get rid of my iPhone. But I use that number alot as well. So that multi line function built in for DIGITS worked for me. If you flash it let me know if it has it built in
Sent from my SM-G973U1 using Tapatalk
Click to expand...
Click to collapse
Wait. How did you get the multi line functioning on the s10? I have been scouring the internet for a solution
Curious, are there any features/capabilities that the unlocked version has, but the TMobile version does not? I ordered an unlocked S10+ (haven't received it yet) and TMobile is my carrier.
From what I've read so far, built-in caller ID, and the ability to turn mobile data off, are not on the TMobile variant, but I can't confirm that.
mosi76 said:
Wait. How did you get the multi line functioning on the s10? I have been scouring the internet for a solution
Click to expand...
Click to collapse
I don't. I have the unlocked version. But I have tmobile. Didn't think about it until I received my device. So If flashing the tmobile software will give it to me i will flash it.
Sent from my SM-G973U1 using Tapatalk
Thanks for the info too! I am also quite curious about this as I have an unlocked S10+ still pre-ordered. Unfortunately, it's too late for me to cancel it and re-ordering it on T-Mobile before April comes around as I would like to use the phone on my travels by then (still hanging on to my S5 at the moment... lol).
From what I've read, the two major features lost on unlocked phones are EVS and RCS messaging. While RCS messaging is something I can live without, I would really like to keep the EVS (Enhanced Voice Service) feature usable on the phone when it arrives.
One other question, are you able to get the updates via T-Mobile on the flashed firmware or does it have to be flashed again for future updates?
KunoMochi said:
Thanks for the info too! I am also quite curious about this as I have an unlocked S10+ still pre-ordered. Unfortunately, it's too late for me to cancel it and re-ordering it on T-Mobile before April comes around as I would like to use the phone on my travels by then (still hanging on to my S5 at the moment... lol).
From what I've read, the two major features lost on unlocked phones are EVS and RCS messaging. While RCS messaging is something I can live without, I would really like to keep the EVS (Enhanced Voice Service) feature usable on the phone when it arrives.
One other question, are you able to get the updates via T-Mobile on the flashed firmware or does it have to be flashed again for future updates?
Click to expand...
Click to collapse
What is EVS? Is that just another term for VoLTE?
Sent from my ZTE A2017U using Tapatalk
Kjn246 said:
What is EVS? Is that just another term for VoLTE?
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
VoLTE and EVS are different. EVS is an evolution of the AMR-WB speech codec (aka HD Voice) whereas VoLTE uses said speech codecs to work. VoLTE is currently recommended to use at least AMR-WB for good voice quality. As EVS is the newer speech codec that uses similar concepts to that of AMR-WB, it is backwards compatible with technologies already using AMR-WB, which includes VoLTE.
That is what I can gather, feel free to correct me if I am wrong in any of the details.
Thanks to all for their insight. Just an update:
I flashed the T-Mo firmware on my unlocked S10+. It worked - RCS and video calling are back! However I noticed 3 things: 1st I used the CSC, but it did not delete all my apps. 2nd when the device rebooted after flashing it went into recovery mode (is this normal?), but i re-rebooted it and it went right into my phone.
3rd while RCS is working on the phone and between my Android 8.0 Note8 Tmo phone, the Note8 cannot send pictures/files to my S10+. The S10+ can send anything to me, but not the other way around. Read, Delivered, typing indicators work. I am not too concerned about this as I am getting an S10+ myself next week so this will not be an issue.
Any thoughts about that?
Other than the RCS thing, the S10+ device is working completely normally. I heard you have to change the CSC on the device but I did not do that (echo, adb, and all that jazz) - is that necessary as well?
Lots of random thoughts over here!
mdiddyshow said:
Thanks to all for their insight. Just an update:
I flashed the T-Mo firmware on my unlocked S10+. It worked - RCS and video calling are back! However I noticed 3 things: 1st I used the CSC, but it did not delete all my apps. 2nd when the device rebooted after flashing it went into recovery mode (is this normal?), but i re-rebooted it and it went right into my phone.
3rd while RCS is working on the phone and between my Android 8.0 Note8 Tmo phone, the Note8 cannot send pictures/files to my S10+. The S10+ can send anything to me, but not the other way around. Read, Delivered, typing indicators work. I am not too concerned about this as I am getting an S10+ myself next week so this will not be an issue.
Any thoughts about that?
Other than the RCS thing, the S10+ device is working completely normally. I heard you have to change the CSC on the device but I did not do that (echo, adb, and all that jazz) - is that necessary as well?
Lots of random thoughts over here!
Click to expand...
Click to collapse
Would you be able to help walk me through the process to do this. I used to root and flash custom roms to phones but the carrier specific and Samsung stuff is new to me. I'm interested in getting on the TMO firmware possibly for RCS but I don't know if it's worth the hassle for it yet
mdiddyshow said:
Thanks to all for their insight. Just an update:
I flashed the T-Mo firmware on my unlocked S10+. It worked - RCS and video calling are back! However I noticed 3 things: 1st I used the CSC, but it did not delete all my apps. 2nd when the device rebooted after flashing it went into recovery mode (is this normal?), but i re-rebooted it and it went right into my phone.
3rd while RCS is working on the phone and between my Android 8.0 Note8 Tmo phone, the Note8 cannot send pictures/files to my S10+. The S10+ can send anything to me, but not the other way around. Read, Delivered, typing indicators work. I am not too concerned about this as I am getting an S10+ myself next week so this will not be an issue.
Any thoughts about that?
Other than the RCS thing, the S10+ device is working completely normally. I heard you have to change the CSC on the device but I did not do that (echo, adb, and all that jazz) - is that necessary as well?
Lots of random thoughts over here!
Click to expand...
Click to collapse
Thanks for that update.
By any chance, could you let us know if the built in VVM is working? (accessed from the dialer by tapping the 3-dot menu button ((from within Dialer)). You should see Visual Voicemail as an option, not just Voicemail.
I flashed the TMo firmware as well, but used Home_CSC. That didn't seem to matter, since Userdata wipes the phone anyways, but I'm curious as to whether that is why I am not seeing Visual Voicemail.
As for the booting into recovery, did you have the reboot option checked in Odin when you started the flash? Mine has booted to recovery before, but it has always been because I forgot to check that box.
jordanyork said:
Thanks for that update.
By any chance, could you let us know if the built in VVM is working? (accessed from the dialer by tapping the 3-dot menu button ((from within Dialer)). You should see Visual Voicemail as an option, not just Voicemail.
I flashed the TMo firmware as well, but used Home_CSC. That didn't seem to matter, since Userdata wipes the phone anyways, but I'm curious as to whether that is why I am not seeing Visual Voicemail.
As for the booting into recovery, did you have the reboot option checked in Odin when you started the flash? Mine has booted to recovery before, but it has always been because I forgot to check that box.
Click to expand...
Click to collapse
So I have another update about this. When I included the userdata in Odin it reset my device. The visual voicemail is not working still, and i can't confirm (or i dont know how to confirm) if wifi calling or VoLTE is working as there isn't any real indication on the device. But all my RCS problems have been fixed!
...Except that all my MMS contains the "Subject: No Subject" header on every single MMS. Every. Single. One. I had to change my default messages app because this was just too damn annoying.
and yeah, i did check the box.
mdiddyshow said:
So I have another update about this. When I included the userdata in Odin it reset my device. The visual voicemail is not working still, and i can't confirm (or i dont know how to confirm) if wifi calling or VoLTE is working as there isn't any real indication on the device. But all my RCS problems have been fixed!
...Except that all my MMS contains the "Subject: No Subject" header on every single MMS. Every. Single. One. I had to change my default messages app because this was just too damn annoying.
and yeah, i did check the box.
Click to expand...
Click to collapse
Is there a voicemail icon in the dialer after flashing? Or it's still not there?
---------- Post added at 03:48 PM ---------- Previous post was at 03:47 PM ----------
WiFi calling option is within the phone app settings itself, and it would word even without flashing tmo
Anyone know if flashing tmobiles firmware onto the unlocked s10 will void warranty? if so id rather just get the locked tmobile version.
Low_Key_Slaps said:
Anyone know if flashing tmobiles firmware onto the unlocked s10 will void warranty? if so id rather just get the locked tmobile version.
Click to expand...
Click to collapse
No. This does not trip knox, nor will it void your warranty. Tampering such as flashing unofficial software will incr the Knox counter. This matters because technicians inspect the software state (among other things during checkups).
Assuming they actually verify it, the device will fail this step (not the case when using signed packages from Samsung for conversion!). .
Ace42 said:
No. This does not trip knox, nor will it void your warranty. Tampering such as flashing unofficial software will incr the Knox counter. This matters because technicians inspect the software state (among other things during checkups).
Assuming they actually verify it, the device will fail this step (not the case when using signed packages from Samsung for conversion!). .
Click to expand...
Click to collapse
I spoke with a Samsung care rep on their website, who told me it will void the warranty. But then again, most customer care reps dont actually know what their talking about beyond the basic questions...
UPDATE:
I need an urgent help however.. I changed my csc to SPRINT from ATnT, using *#272*IMEI number# method. I kept changing to T mobile, and all, until I got stuck with SPRINT.
Now I tried the *#272*IMEI number# method and it won't let me do it with SPRINT CSC.
HELP please ( I just want to go back to ATnT or T mobile again..
Hi guys,
I just gave me iphone xs max to my wife since her iphone 7 is already too buggy and slow. Now that I moved to s10+, I love it and but the customization option is overwhelming me. Happy though that its customizable.
Then I realize 1 critical thing. I bought a snapdragon USA version of AT&T from local importer. I am located in Asia. When I looked at the software version, its only at "G975USQU1ASD3" with security patch, March 2019. I tried for 2 days now to get the OTA update and it just wont come. Saying that I already got the latest update.
Naturally I checked google and found so many updates, and one of them, night mode in camera, I really want. Now I am a newbie in all of these. My question is.. how do I get the non OTA update? I don't have a PC, but I might be able to use my work PC. I do have an micro SD card.
In summary:
1. Where to find the update files? the non OTA version
2. Is it doable without PC?
3. Can I just jump to the latest firmware update, or do I have to do it manually one by one?
4. Will it wipe my phone, because I spent hours customizing it before checking the problem.
Thank you very much if there's anyone willing to help me figuring things out.
regards,
torakun said:
Hi guys,
I just gave me iphone xs max to my wife since her iphone 7 is already too buggy and slow. Now that I moved to s10+, I love it and but the customization option is overwhelming me. Happy though that its customizable.
Then I realize 1 critical thing. I bought a snapdragon USA version of AT&T from local importer. I am located in Asia. When I looked at the software version, its only at "G975USQU1ASD3" with security patch, March 2019. I tried for 2 days now to get the OTA update and it just wont come. Saying that I already got the latest update.
Naturally I checked google and found so many updates, and one of them, night mode in camera, I really want. Now I am a newbie in all of these. My question is.. how do I get the non OTA update? I don't have a PC, but I might be able to use my work PC. I do have an micro SD card.
In summary:
1. Where to find the update files? the non OTA version
2. Is it doable without PC?
3. Can I just jump to the latest firmware update, or do I have to do it manually one by one?
4. Will it wipe my phone, because I spent hours customizing it before checking the problem.
Thank you very much if there's anyone willing to help me figuring things out.
regards,
Click to expand...
Click to collapse
1.You can download firmwares on sammobile.com for your model
2.You can use work PC but need get small software named Odin and samsung drivers for correct work
3.You not need install one by one you can flash directly to latest one but must use HOME_CSC and make backup with samsung app named smart switch which is already on phone if not you can get it on Google Play Store
Poslano z mojega SM-G975F z uporabo Tapatalk
---------- Post added at 06:40 AM ---------- Previous post was at 06:39 AM ----------
Btw you can use Frija software too fir download firmware
Poslano z mojega SM-G975F z uporabo Tapatalk
Hi, check the thread
https://forum.xda-developers.com/s10-plus/how-to/guide-g975f-flashing-megathread-faqs-t3936704
there are answers for all your questions=)
thank you very much guys!
I need an urgent help however.. I changed my csc to SPRINT from ATnT, using *#272*IMEI number# method. I kept changing to T mobile, and all, until I got stuck with SPRINT.
Now I tried the *#272*IMEI number# method and it won't let me do it with SPRINT CSC.
HELP please ( I just want to go back to ATnT or T mobile again..
To try and force a change of the csc power down your phone, remove the SIM card and boot up your phone without any SIM inserted. After the phone has completely booted up insert your SIM and you should get a message that the network settings are being updated.
I purchased an unlocked AT&T S10+ as well to use on T-Mobile. Since you don't actually have AT&T service I would very strongly recommend that you flash the U1 (unlocked) firmware. There are instructions for doing this in another XDA thread.
AT&T firmware is modded specifically for their messaging, network and WiFi services. Since I'm not an AT&T customer I got no OTA updates until I flashed the U1 firmware. Immediately after flashing the U1 firmware and booting up OTA updates were available to download and I receive OTA updates when they are available so there's no further need to manually flash updates using a computer.
The current U1 firmware has night mode for the camera and was just updated this week to the August security patch (which is good for Samsung).
jhs39 said:
To try and force a change of the csc power down your phone, remove the SIM card and boot up your phone without any SIM inserted. After the phone has completely booted up insert your SIM and you should get a message that the network settings are being updated.
I purchased an unlocked AT&T S10+ as well to use on T-Mobile. Since you don't actually have AT&T service I would very strongly recommend that you flash the U1 (unlocked) firmware. There are instructions for doing this in another XDA thread.
AT&T firmware is modded specifically for their messaging, network and WiFi services. Since I'm not an AT&T customer I got no OTA updates until I flashed the U1 firmware. Immediately after flashing the U1 firmware and booting up OTA updates were available to download and I receive OTA updates when they are available so there's no further need to manually flash updates using a computer.
The current U1 firmware has night mode for the camera and was just updated this week to the August security patch (which is good for Samsung).
Click to expand...
Click to collapse
Hi thank you very much for your help. I appreaciate it. However, as you can see from my opening post, I kinda did a mistake and locked myself out of AT&T now.. I am stuck with Sprint after changing CSC 3x feeling safe.. then Spint removed my ability to change CSC via *#272*IMEI#
:crying::crying::crying:
You shouldn't need to change the CSC using the dial code. If you cold start your phone without a SIM card then insert the sim after your phone has fully booted up you should get a message about your network settings updating.
I would also still recommend flashing the U1 unlocked firmware.
jhs39 said:
You shouldn't need to change the CSC using the dial code. If you cold start your phone without a SIM card then insert the sim after your phone has fully booted up you should get a message about your network settings updating.
I would also still recommend flashing the U1 unlocked firmware.
Click to expand...
Click to collapse
Hi thanks again for replying to me. I tried many times doing this but as soon as my SIM card got in, SPRINT OMADM took over.. I can't even get rid of the notification.. sigh..
This might help:
https://forum.xda-developers.com/sp...-to-remove-sprint-omadm-notification-t3636264
That's apparently something annoying that's specific to Sprint.
To get rid of any US carrier stuff on your phone I would still suggest using the modified Odin (which can be found in the XDA firmware flashing threads for the S10+) and flash the U1 firmware version which is carrier free.
For those who aren't already aware, G988U is the model number of all of the US carrier versions of the S20 Ultra. The G988U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among these models: any U or U1 firmware version can be flashed to any U or U1 device at any time, assuming that you're not trying to downgrade the bootloader. Also, U firmware is identical for the 4 base files (AP, BL, CP, CSC) for each individual build, no matter which carrier it comes from. So if you download 2 different carrier versions of the exact same build, the 4 base files will be identical. Where the firmware differs is in the USERDATA file - that's where the carrier bloatware and customizations reside.
Manual Odin flashing is designed for those who:
- want to manually update to a newer version of U firmware on their U device, either because they don't want to wait for their carrier's OTA or because OTAs aren't working on their device, or a different carrier got a new feature/patch before they did
- want to flash U1 firmware to their U device
- want to convert from U1 firmware to carrier U firmware
- want to convert from one carrier's U firmware (with all apps and bloatware) to a different carrier's U firmware (with all apps and bloatware)
For those who aren't already aware, anyone can now download firmware for almost any Samsung device any time that they want, via SamFirm or Frija. There are threads and info about them here on XDA so I won't waste time explaining - do a search if you're not already familiar with these tools. But they only provide whatever the latest/newest/current version is - nothing older. I pay for a subscription to a site that gets the official releases (usually) before they hit SamFirm/Frija, so that's where my files come from. However, I don't have unlimited bandwidth on the site, and it's also quite time consuming to download the files, zip them up, and upload them to AFH. And, I do threads like this for every single Sx and Note x model - so I won't be uploading every single version. The only full builds that I upload are ones where I get access to a new bootloader and/or Android version early, before they hit SamFirm/Frija.
This is not a "beginner's guide to Odin flashing" -type post/thread, so I won't list basic, step-by-step flashing instructions. My threads are geared towards those who already know what they're doing. If you're new to manually flashing Samsung firmware, I recommend you consult one of those "beginner's" guides- there are tons of them here on XDA.
Happy flashing!
U firmware: https://www.androidfilehost.com/?w=files&flid=305574
U1 firmware: https://www.androidfilehost.com/?w=files&flid=305575
Notes:
- DON'T QUOTE THE OP WHEN YOU REPLY, kthx
- I have lots of threads just like this one for other Samsung flagships, if it interests you. For those who have already made use of my previous threads for a different device and are upgrading to an S20, welcome back
- My zips are compressed extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- My naming method for folders on AFH is: build - bootloader - Android version
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and it's Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data. Flashing USERDATA will also wipe data
- Since AT&T doesn't allow their firmware to be publicly available (for any of their devices), I'll try to always upload at least one USERDATA per bootloader increment for AT&T (and Cricket, if they get this model). I'll also upload any full builds if AT&T is the only carrier to get that specific build, because you won't be able to find the files anywhere else.
- For identifying USERDATAS, and to know what region/CSC to use in SamFirm/Frija:
ATT = AT&T (not available via SamFirm/Frija)
CCT = Xfinity Mobile (Comcast)
CHA = Spectrum Mobile (Charter)
SPR = Sprint
TMB = T-Mobile
USC = US Cellular
VZW = Verizon (available via SamFirm/Frija, but Manual Entry is required - Auto will not work)
XAA = U1 firmware
- the correct procedure for switching from one carrier's firmware to another is:
1. Flash full U1 firmware package including non HOME CSC
2. Upon boot, insert a SIM of the carrier whose firmware you want
3. Watch for the popup that says "reboot to apply new carrier settings" etc, and do it
4. After that restart completes, reboot back to Download mode and flash the full U firmware package, with the USERDATA file of the carrier whose firmware you want
Pre-release notes:
1. I do not have one of these and do not plan to acquire one, so I have no idea if anything can actually be flashed at this moment - I'm just providing the firmware. Like all other models, I'm assuming patched Odin is needed for this, but it wouldn't surprise me if a new version is needed for this specific device. There's only one way to know though, so as soon as someone gets their hands on one and can try this, please let us know.
2. I don't know if using the HOME CSC will actually save data. I don't get access to that file straight from the source - I have to decompile the regular CSC, remove the parts that initiate the factory reset, and then re-compile it. Based on the S10 and Note 10, I've done what I think will avoid a factory reset. But the S20 has some new partitions, so we won't know for sure until someone tests it. So if you're willing to be that guinea pig, you're responsible for taking proper steps to avoid an FRP lock, make sure your data is backed up, etc
I will be the first to try. I ordered the unlocked. I will flash the TMO firmware. I have it downloaded already
Sent from my SM-G975U1 using Tapatalk
Thanks for posting these! I ordered the Verizon model but am planning on flashing the unlocked firmware once I get it in hand.
Sent from my SM-N975U using Tapatalk
at this point can we only flash the Userdata for the carrier without the actual firmware?
daraj said:
at this point can we only flash the Userdata for the carrier without the actual firmware?
Click to expand...
Click to collapse
I guess you could flash USERDATA by itself. There's really no point to doing that though
No the firmware is there. Its a separate file zipped up
Sent from my SM-G975U1 using Tapatalk
Is it possible to flash Canada firmware to the us variant or is that not advised ?
roadcabe14 said:
Is it possible to flash Canada firmware to the us variant or is that not advised ?
Click to expand...
Click to collapse
Canadian firmware has been able to be flashed to US Samsung flagship phones ever since the S7. So yes, I would assume that that trend will continue with the S20
Samfirm and Frija have TBN firmware available...I assume based on the naming that it's newer than the ones you have uploaded? I also saw on Sammobile that Verizon has already released a newer firmware which is odd considering they haven't even shipped them yet...lol
tlbland0426 said:
Samfirm and Frija have TBN firmware available...I assume based on the naming that it's newer than the ones you have uploaded? I also saw on Sammobile that Verizon has already released a newer firmware which is odd considering they haven't even shipped them yet...lol
Click to expand...
Click to collapse
1. SamFirm and Frija will always only give you whatever the newest/latest version is. So if it's not the same version that I have uploaded, then yes, it's a newer one.
2. Not odd at all. Most devices get an OTA before release to fix bugs, add features, etc. There was an OTA that came out shortly after I got access to the files, so TBN would be the 3rd release now for this model
3. Looks like firmware has now hit SamFirm and Frija for all S20 models, for anyone who wants to download it themselves
Tried flashing multiple times ATT FW with Odin 3.14.1. Odin reports no errors but it's definitely not taking. SW info still reports XAA and I have no "carrier bloat".
Its not as simple as that. There is a trick when going from unlocked to carrier fw. Look on s10 forums, the procedure is there I believe
Sent from my SM-G975U1 using Tapatalk
johnwayne27 said:
Its not as simple as that. There is a trick when going from unlocked to carrier fw. Look on s10 forums, the procedure is there I believe
Sent from my SM-G975U1 using Tapatalk
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s10/help/samsung-s10-unlocked-phone-att-firmware-t3912973
this thread? pretty much the same process. if you don't mind linking me i'm working on trying to get this done proper and won't sleep until then lol
Ive been there done that. Timing is everything. Gotta reset dorectly after boot and flash and when i see carrier update prompt-you know its right. Trial and error.
Sent from my SM-G975U1 using Tapatalk
johnwayne27 said:
Ive been there done that. Timing is everything. Gotta reset dorectly after boot and flash and when i see carrier update prompt-you know its right. Trial and error.
Sent from my SM-G975U1 using Tapatalk
Click to expand...
Click to collapse
TY. Tried again this morning and got it. I assumed I did not need to flash U1 first since my phone was already unlocked. Doing that made all the difference. New to all of this but glad it's finally done!
johnwayne27 said:
Its not as simple as that. There is a trick when going from unlocked to carrier fw. Look on s10 forums, the procedure is there I believe
Sent from my SM-G975U1 using Tapatalk
Click to expand...
Click to collapse
Procedure is also given right here, in the OP
Will flashing the att firmware to an unlocked phone enable wifi calling?
Murph2k said:
Will flashing the att firmware to an unlocked phone enable wifi calling?
Click to expand...
Click to collapse
My other threads are chock full of discussions of this exact thing. Bottom line is, we don't know until someone tries it
I'm trying to download the Tmobile from the SamFirm tool for my S20 ultra SM-G988U1
I put in the model number above and TMB in the region.
But I also noticed that if I enter any other region, it's the same filename and size as well. Just want to make sure about downloading the right file.
I re-read the OP, and saw some youtube videos. It's my assumption now that I need to put SM-G988U in the MODEL and keep TMB as the region to download the correct firmware. Am I correct in assuming this is the correct way to go?
The reason I want to do this is because I want to have Tmobiles advance messaging feature back
For those who aren't already aware, G986U is the model number of all of the US carrier versions of the S20+. The G986U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among these models: any U or U1 firmware version can be flashed to any U or U1 device at any time, assuming that you're not trying to downgrade the bootloader. Also, U firmware is identical for the 4 base files (AP, BL, CP, CSC) for each individual build, no matter which carrier it comes from. So if you download 2 different carrier versions of the exact same build, the 4 base files will be identical. Where the firmware differs is in the USERDATA file - that's where the carrier bloatware and customizations reside.
Manual Odin flashing is designed for those who:
- want to manually update to a newer version of U firmware on their U device, either because they don't want to wait for their carrier's OTA or because OTAs aren't working on their device, or a different carrier got a new feature/patch before they did
- want to flash U1 firmware to their U device
- want to convert from U1 firmware to carrier U firmware
- want to convert from one carrier's U firmware (with all apps and bloatware) to a different carrier's U firmware (with all apps and bloatware)
For those who aren't already aware, anyone can now download firmware for almost any Samsung device any time that they want, via SamFirm or Frija. There are threads and info about them here on XDA so I won't waste time explaining - do a search if you're not already familiar with these tools. But they only provide whatever the latest/newest/current version is - nothing older. I pay for a subscription to a site that gets the official releases (usually) before they hit SamFirm/Frija, so that's where my files come from. However, I don't have unlimited bandwidth on the site, and it's also quite time consuming to download the files, zip them up, and upload them to AFH. And, I do threads like this for every single Sx and Note x model - so I won't be uploading every single version. The only full builds that I upload are ones where I get access to a new bootloader and/or Android version early, before they hit SamFirm/Frija.
This is not a "beginner's guide to Odin flashing" -type post/thread, so I won't list basic, step-by-step flashing instructions. My threads are geared towards those who already know what they're doing. If you're new to manually flashing Samsung firmware (or haven't done it in a long time), I recommend you consult one of those "beginner's" guides- there are tons of them here on XDA.
Happy flashing!
U firmware: https://www.androidfilehost.com/?w=files&flid=305579
U1 firmware: https://www.androidfilehost.com/?w=files&flid=305580
Notes:
- DON'T QUOTE THE OP WHEN YOU REPLY, kthx
- I have lots of threads just like this one for other Samsung flagships, if it interests you. For those who have already made use of my previous threads for a different device and are upgrading to an S20, welcome back
- My zips are compressed extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- My naming method for folders on AFH is: build - bootloader - Android version
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and it's Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data. Flashing USERDATA will also wipe data.
- Since AT&T doesn't allow their firmware to be publicly available (for any of their devices), I'll try to always upload at least one USERDATA per bootloader increment for AT&T (and Cricket, if they get this model). I'll also upload any full builds if AT&T is the only carrier to get that specific build, because you won't be able to find the files anywhere else.
- For identifying USERDATAS, and to know what region/CSC to use in SamFirm/Frija:
AIO = Cricket (not available via SamFirm/Frija)
ATT = AT&T (not available via SamFirm/Frija)
BST = Boost Mobile
CCT = Xfinity Mobile (Comcast)
CHA = Spectrum Mobile (Charter)
SPR = Sprint
TMB = T-Mobile
TMK = Metro PCS
USC = US Cellular
VZW = Verizon (available via SamFirm/Frija, but Manual Entry is required - Auto will not work)
XAA = U1 firmware
- the correct procedure for switching from one carrier's firmware to another is:
1. Flash full U1 firmware package including non HOME CSC
2. Upon boot, insert a SIM of the carrier whose firmware you want
3. Watch for the popup that says "reboot to apply new carrier settings" etc, and do it
4. After that restart completes, reboot back to Download mode and flash the full U firmware package, with the USERDATA file of the carrier whose firmware you want
Notes:
1. I do not have one of these and do not plan to acquire one, so I have no idea if anything can actually be flashed at this moment - I'm just providing the firmware. Like all other models, I'm assuming patched Odin is needed for this, but it wouldn't surprise me if a new version is needed for this specific device. There's only one way to know though, so as soon as someone gets their hands on one and can try this, please let us know
It's been confirmed that Odin 3.14.1 Patched is needed for flashing S20s - https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
H/T @clabern
2. I don't know if using the HOME CSC will actually save data. I don't get access to that file straight from the source - I have to decompile the regular CSC, remove the parts that initiate the factory reset, and then re-compile it. Based on the S10 and Note 10, I've done what I think will avoid a factory reset. But the S20 has some new partitions, so we won't know for sure until someone tests it. So if you're willing to be that guinea pig, you're responsible for taking proper steps to avoid an FRP lock, make sure your data is backed up, etc
What are TAW and TAY
Vats12 said:
What are TAW and TAY
Click to expand...
Click to collapse
That's explained in the OP
Odin fail
Couldn't get odin to work, probably needs an update, tried 3.14.4 and custom. either freezes at setupconnection, or says write failed.
iBowToAndroid said:
That's explained in the OP
Click to expand...
Click to collapse
I want to know who is TAW/TAY? like SPR is Sprint, VZW is Verizon...
I didn't find this information on the internet or maybe I am not searching with the right keyword.
luminaire117 said:
Couldn't get odin to work, probably needs an update, tried 3.14.4 and custom. either freezes at setupconnection, or says write failed.
Click to expand...
Click to collapse
Freezing at SetupConnection can be a USB issue. Try again with a different port, different cable, or different PC
Vats12 said:
I want to know who is TAW/TAY? like SPR is Sprint, VZW is Verizon...
I didn't find this information on the internet or maybe I am not searching with the right keyword.
Click to expand...
Click to collapse
TAW/TAY are not carrier CSC codes. As I already stated, the explanation for what TAW/TAY is is given in the OP
Just wanted to let folks know I had to use this patched Odin (3.14.1_3B) in order to flash unlocked (U1) firmware on my Verizon S20+. Pulled the most recent firmware from Sammobile and flashed it successfully.
clabern said:
Just wanted to let folks know I had to use this patched Odin (3.14.1_3B) in order to flash unlocked (U1) firmware on my Verizon S20+. Pulled the most recent firmware from Sammobile and flashed it successfully.
Click to expand...
Click to collapse
Sweet, good to know - thanks!
maybe i am misreading the OP but can the stock firmware be used to go from t-mobile to stock?
danon.brown said:
maybe i am misreading the OP but can the stock firmware be used to go from t-mobile to stock?
Click to expand...
Click to collapse
Yes, if by "stock" you mean "factory unlocked" aka U1.
clabern said:
Just wanted to let folks know I had to use this patched Odin (3.14.1_3B) in order to flash unlocked (U1) firmware on my Verizon S20+. Pulled the most recent firmware from Sammobile and flashed it successfully.
Click to expand...
Click to collapse
It has been a while since i looked into flashing. I want to do the same (have an s20+ verizon) I want factory unlocked software . On sam mobile , everything looks like it has a carrier attached even looking up U1 model. Which did you pick?
iHTC said:
It has been a while since i looked into flashing. I want to do the same (have an s20+ verizon) I want factory unlocked software . On sam mobile , everything looks like it has a carrier attached even looking up U1 model. Which did you pick?
Click to expand...
Click to collapse
You want product code "XAA". So it should be this one.
clabern said:
You want product code "XAA". So it should be this one.
Click to expand...
Click to collapse
that's what I figured. Any difference going to sam mobile vs the one in the original post here, I assume both are current this early on in the game. Thanks for your help!
iHTC said:
that's what I figured. Any difference going to sam mobile vs the one in the original post here, I assume both are current this early on in the game. Thanks for your help!
Click to expand...
Click to collapse
The one from Sammobile is more current, there was an update soon after launch. You can compare the build number to that of the software on your phone.
Anybody else flash the VZW userdata and still end up with Tmo branding, bloat, and boot animation?
finshan said:
Anybody else flash the VZW userdata and still end up with Tmo branding, bloat, and boot animation?
Click to expand...
Click to collapse
If you didn't follow the steps in the OP correctly, then yes, you can very possibly end up with the same bloat as before
Ok. So I guess the one place I'm struggling, from a not implemented, but understanding standpoint is that the instructions show how to go to carrier branded versions, but if I just want the U1 firmware, do I need to follow through with the other portion, the second flashing that happens, or can I just run the unbranded one?
halcyon77 said:
Ok. So I guess the one place I'm struggling, from a not implemented, but understanding standpoint is that the instructions show how to go to carrier branded versions, but if I just want the U1 firmware, do I need to follow through with the other portion, the second flashing that happens, or can I just run the unbranded one?
Click to expand...
Click to collapse
Just flash U1 - nothing else
Thank you for this. I was able to flash from Tmobile to the U1 firmware with a virtual machine.