Hey guys !, I have testing the system.img of the CrDroid Rom from Mi A3 and it works great, everything works on our CC9e (I have been using it for some days and works very well)
You need an unlocked bootloader , a TWRP working on your device, you must be on xiaomi.eu miui 12 (in order to get android 10 vendor) and some files listed below:
1- Crdroid Rom from Mi A3
2- Payload dumper
3- Magisk 20.x
If you wanna test it follow the next steps:
A) Extract the payload dumper.zip you will get a payload imput folder, payload output folder and payload.exe file
B) Open the Crdroid rom. zip with 7zip or similar and copy the payload.bin file to payload_imput folder
C) Open the payload_dumper.exe file and wait until the window close automatically, then copy the system.img file from the payload_output folder to a otg device, internal memory or sd card
D) Enter to twrp format data, then go to wipe option, slide to wipe data and cache partition, then go to install option and flash the system.img file in the system partition (the file that you copy to device in the step C)
E) Once the system.img is installed, don't reboot , just go back to install option in twrp and install magisk 20 zip, once it is installed just reboot and enjoy crdroid rom
Credits from the MI A3 CrDroid ROM:
@Harukey - device sources
@oddlyspaced - recovery
@charliespencerchaplin
@prakaship78
@nullbytepl
@Baraach95
@lapotinval
@Golbinex
@Rj saiful for the first testing of system image
Where is my credit
I had testing 1st this system.img from crdroid A3, I showed you on telegram group... And you wirte you did.... Give credit bro
fer15 said:
Hey guys !, I have testing the system.img of the CrDroid Rom from Mi A3 and it works great, everything works on our CC9e (I have been using it for some days and works very well)
You need an unlocked bootloader , a TWRP working on your device, you must be on xiaomi.eu miui 12 (in order to get android 10 vendor) and some files listed below:
1- Crdroid Rom from Mi A3
2- Payload dumper
3- Magisk 20.x
If you wanna test it follow the next steps:
A) Extract the payload dumper.zip you will get a payload imput folder, payload output folder and payload.exe file
B) Open the Crdroid rom. zip with 7zip or similar and copy the payload.bin file to payload_imput folder
C) Open the payload_dumper.exe file and wait until the window close automatically, then copy the system.img file from the payload_output folder to a otg device, internal memory or sd card
D) Enter to twrp format data, then go to wipe option, slide to wipe data and cache partition, then go to install option and flash the system.img file in the system partition (the file that you copy to device in the step C)
E) Once the system.img is installed, don't reboot , just go back to install option in twrp and install magisk 20 zip, once it is installed just reboot and enjoy crdroid rom
Credits from the MI A3 CrDroid ROM:
@Harukey - device sources
@oddlyspaced - recovery
@charliespencerchaplin
@prakaship78
@nullbytepl
@Baraach95
@lapotinval
@Golbinex
Click to expand...
Click to collapse
You are great.
Thanks you so much!!! I am so glad you give a credit
t Thanks! Thank you so much, I've been looking for a tutorial for a long time and finally found it! I finally successfully installed crdroid's Android 10 for cc9e just now! Is Android 11 also installed with a tutorial like yours?
Good news!!
The same way can install the crDroid 8.8, Android 12.
Everything works fine except the speaker
Nofated said:
View attachment 5704085
Good news!!
The same way can install the crDroid 8.8, Android 12.
Everything works fine except the speaker
Click to expand...
Click to collapse
what vendor do u use?
nkson20789 said:
what vendor do u use?
Click to expand...
Click to collapse
The Vendor from the MIUI 12.5 by xiaomi.eu, which is based on Andorid 10.
Seems that the way I installed the Crdroid can't load the driver correctly. I tried to install the Evolution x which is based on Android 13, the audio module still can't run correctly.
ps. I tried to flash the vendor.img from evolution x. The CC 9e can't load the system successfully. It stuck on the loading screen of evolution x, which appears after the Mi Logo.
I will try to install Evolution which is based on Andorid 10 soon. Hope everything will work well.
is there any error or bugs in this rom?
Nofated said:
The Vendor from the MIUI 12.5 by xiaomi.eu, which is based on Andorid 10.
Seems that the way I installed the Crdroid can't load the driver correctly. I tried to install the Evolution x which is based on Android 13, the audio module still can't run correctly.
ps. I tried to flash the vendor.img from evolution x. The CC 9e can't load the system successfully. It stuck on the loading screen of evolution x, which appears after the Mi Logo.
I will try to install Evolution which is based on Andorid 10 soon. Hope everything will work well.
Click to expand...
Click to collapse
Why I can't use my In-Screen Fingerprint or Always On Display but my speakers are work fine
I use the vendor from xiaomi.eu MIUI12.5.5
Nofated said:
The Vendor from the MIUI 12.5 by xiaomi.eu, which is based on Andorid 10.
Seems that the way I installed the Crdroid can't load the driver correctly. I tried to install the Evolution x which is based on Android 13, the audio module still can't run correctly.
ps. I tried to flash the vendor.img from evolution x. The CC 9e can't load the system successfully. It stuck on the loading screen of evolution x, which appears after the Mi Logo.
I will try to install Evolution which is based on Andorid 10 soon. Hope everything will work well.
Click to expand...
Click to collapse
I have an Evolution X rom based on Android 10,it works
RyanLin_ said:
Why I can't use my In-Screen Fingerprint or Always On Display but my speakers are work fine
I use the vendor from xiaomi.eu MIUI12.5.5
Click to expand...
Click to collapse
You sure? I have tested the latest version of Evolution X which is based on Android 13. My speaker and Fingerprint couldn't work.
RyanLin_ said:
I have an Evolution X rom based on Android 10,it works
Click to expand...
Click to collapse
Would you like to provide the forum or links of the rom?
I have tested the evo 4.6 and it couldn't boot. But the CrDroid Rom runs correctly.
Nofated said:
Would you like to provide the forum or links of the rom?
I have tested the evo 4.6 and it couldn't boot. But the CrDroid Rom runs correctly.
Click to expand...
Click to collapse
I have a link from the telegram group. micc9e
nkson20789 said:
I have a link from the telegram group. micc9e
Click to expand...
Click to collapse
I'd like to try the rom later.
And I will try to install the vendor from MIUI 13(Android 11) and retry the Evolution which was based on the Android 13.
I will stay on the A13 if the speaker works well.
So,do you need the link of evolution x right now?
Nofated said:
I'd like to try the rom later.
And I will try to install the vendor from MIUI 13(Android 11) and retry the Evolution which was based on the Android 13.
I will stay on the A13 if the speaker works well.
Click to expand...
Click to collapse
Related
Finally Builded Dual Boot Patcher For Redmi 4x With All Fixes.
Now DBP is official for Redmi 4x
Note:- Redmi 4x/4(India) both are same.
Note:-I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE.USE AT YOUR OWN RISK.THIS IS PERSONALLY TESTED BY ME SO IT SHOULD NOT CREATE ANY PROBLEM IF YOU FOLLOW THE STEPS ABOVE PROPERLY
ENJOY
The Requirement:
1- TWRP Latest[Recommended] ==> TWRP For Santoni
2- Decrypted Data ==> (Format Data)(Important Step or Else Rom will not boot and it will wipe internal storage so take a backup)
3- Magisk or Supersu (I used Magisk)
The Installation Steps:
1- Install the latest DBP from here ==> Dual Boot Patcher
(As this build is debug it will create another app name 'Leaks' so dont uninstall it will also uninstall DBP app)
2- Go to Settings ==>Installed apps==>All==>Documents==>Enable
3- Go to app and click on ROMs and grant it a root access.
4- Click yes to update the "Primary Kernel"
5- Go to "Patch Zip File"
6- Click on "Add flashable zip"
7- Choose the required ROM such as "YurekaOS"
8- Click "OPEN"
9- Under partition configuration choose "Data slot/Ext slot/secondary(if have enough space)"
10- Enter and ID as "Yureka or any name you like"
11- Click on "Continue"
12- Click on "SAVE"
13- Click on "Right Mark" to patch the zip file
14- Wait till the operation to finish
15- Go to "ROMs"
16- Click on "Add patched file" to flash it
17- Click on "Keep the current location"
18- Flash and wait till the operation to finish
19- Go to "ROMs" to make sure that the new second ROM is added
20- Now close the app and re-open it for refreshing
21- Adding the "Gapps Package"
22- Go to "Patch Zip File"
23- Click on "Add flashable zip"
24- Choose the required any gapps package
25- Click "OPEN"
26- Check and make sure that the ID in step 10 "Yureka or any name you like" is appeared as "Yureka or any name you like (Data slot)"
27- Repeat the steps from 11 to 18
28- Reboot
29- Install the DBP again
30- Choose the primary ROM and reboot
31- To install boot ui==>Go to settings==>click on install boot ui (it will give you option to boot to which rom on every reboot)(This step is optional)(in order to use 'boot ui' update ramsdisk of both rom)
About Partitons:
data-slot = internal storage (can be used)(recommended)
Extsd-slot = external sd card (can be used)
Primary= System Partition ( No use )
Secondary = System Partition (Only can be used if much of sytem space left)
Multi-slots = cache partition ( No use )
What's Working:
Everything
What are not Working:
Tell me
Special thanks to:
@chenxiaolong for such an beautiful open source project
@dg28gadhavi (For guiding me the basics and helping in every manner he can)
Contributors
Nik001, dg28gadhavi, chenxiaolong
Official XDA Thread: Official Thread
Official Sources Code:https://github.com/chenxiaolong/DualBootPatcher
Sources Code:https://github.com/Nikesh001/DualBootPatcher
Plz give a thumbs up to the thread if you all like it:good:
HAPPY DUALBOOTING:good:
Nik001 said:
Finally Builded Dual Boot Patcher For Redmi 4x With All Fixes.
Note:- Redmi 4x/4(India) both are same.
Note:-I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE.USE AT YOUR OWN RISK.THIS IS PERSONALLY TESTED BY ME SO IT SHOULD NOT CREATE ANY PROBLEM IF YOU FOLLOW THE STEPS ABOVE PROPERLY
ENJOY
The Requirement:
1- TWRP Latest[Recommended] ==> TWRP For Santoni
2- Decrypted Data ==> (Format Data)(Important Step or Else Rom will not boot and it will wipe internal storage so take a backup)
3- Magisk or Supersu (I used Magisk)
The Installation Steps:
1- Install the latest DBP from here ==> Dual Boot Patcher
(As this build is debug it will create another app name 'Leaks' so dont uninstall it will also uninstall DBP app)
2- Go to Settings ==>Installed apps==>All==>Documents==>Enable
3- Go to app and click on ROMs and grant it a root access.
4- Click yes to update the "Primary Kernel"
5- Go to "Patch Zip File"
6- Click on "Add flashable zip"
7- Choose the required ROM such as "YurekaOS"
8- Click "OPEN"
9- Under partition configuration choose "Data slot/Ext slot/secondary(if have enough space)"
10- Enter and ID as "Yureka or any name you like"
11- Click on "Continue"
12- Click on "SAVE"
13- Click on "Right Mark" to patch the zip file
14- Wait till the operation to finish
15- Go to "ROMs"
16- Click on "Add patched file" to flash it
17- Click on "Keep the current location"
18- Flash and wait till the operation to finish
19- Go to "ROMs" to make sure that the new second ROM is added
20- Now close the app and re-open it for refreshing
21- Adding the "Gapps Package"
22- Go to "Patch Zip File"
23- Click on "Add flashable zip"
24- Choose the required any gapps package
25- Click "OPEN"
26- Check and make sure that the ID in step 10 "Yureka or any name you like" is appeared as "Yureka or any name you like (Data slot)"
27- Repeat the steps from 11 to 18
28- Reboot
29- Install the DBP again
30- Choose the primary ROM and reboot
31- To install boot ui==>Go to settings==>click on install boot ui (it will give you option to boot to which rom on every reboot)(This step is optional)(in order to use 'boot ui' update ramsdisk of both rom)
About Partitons:
data-slot = internal storage (can be used)(recommended)
Extsd-slot = external sd card (can be used)
Primary= System Partition ( No use )
Secondary = System Partition (Only can be used if much of sytem space left)
Multi-slots = cache partition ( No use )
What's Working:
Everything
What are not Working:
Tell me
Special thanks to:
@chenxiaolong for such an beautiful open source project
@dg28gadhavi (For guiding me the basics and helping in every manner he can)
Contributors
Nik001, dg28gadhavi, chenxiaolong
Official XDA Thread: Official Thread
Official Sources Code:https://github.com/chenxiaolong/DualBootPatcher
Sources Code:https://github.com/Nikesh001/DualBootPatcher
Plz give a thumbs up to the thread if you all like it:good:
HAPPY DUALBOOTING:good:
Click to expand...
Click to collapse
Hey please help me i am also trying to port this but I don't have a proper idea how to
Can i have 2 rom with 16gb rom?
Hey, i have try this. Buty device going to bootlop. How dp i fix this?
randifilan said:
Hey, i have try this. Buty device going to bootlop. How dp i fix this?
Click to expand...
Click to collapse
How can you get bootloop?
When i try this. When i switch tto the secondary rom. My phone is bootloop.
Can you provide a video for me on redmi 4x? I have try many time but still bootloop. My phone is vibrate when change the rom. I try this oh R.R 5.8.4.
Install the dualboot patcher utilities, download from official thread. Try it and comment again if it success.
can i use lazy flasher for step 2
Hey Nik
The official build is out ..and I have made an Instructional thread on mi forum .
I want to know ..Why can't I use magisk in second ROM
.Where I am doing wrong .
I have tried to flash it patched ... Failed
Non patched direct through recovery ...failed .
Plz help
Wasef x said:
Hey Nik
The official build is out ..and I have made an Instructional thread on mi forum .
I want to know ..Why can't I use magisk in second ROM
.Where I am doing wrong .
I have tried to flash it patched ... Failed
Non patched direct through recovery ...failed .
Plz help
Click to expand...
Click to collapse
Can you give me the link?
randifilan said:
Can you give me the link?
Click to expand...
Click to collapse
Sure ..
Here it is
http://en.miui.com/thread-825128-1-1.html
Wasef x said:
Sure ..
Here it is
http://en.miui.com/thread-825128-1-1.html
Click to expand...
Click to collapse
I already try from this, but failed, are success do that? I try in from RR, and install AEX, when switch the rom, my phone got vibrate twice and go to twrp, i use dualboot utility and doent work. Are you success?
randifilan said:
I already try from this, but failed, are success do that? I try in from RR, and install AEX, when switch the rom, my phone got vibrate twice and go to twrp, i use dualboot utility and doent work. Are you success?
Click to expand...
Click to collapse
I have it working .
One thing ..
When you switch ROM .
Don't do it directly .
First update the ramdisk of that ROM on which you wanna switch .
Otherwise it doesn't boot
Wasef x said:
I have it working .
One thing ..
When you switch ROM .
Don't do it directly .
First update the ramdisk of that ROM on which you wanna switch .
Otherwise it doesn't boot
Click to expand...
Click to collapse
I have update the ramdisk. But still not work. Also failed.
I can't enable wifi after updating primary rom (Xiaomi. Eu). . Any solution?
How to decrypted data?
strbgs27 said:
How to decrypted data?
Click to expand...
Click to collapse
TWRP...Wipe...Format Data
What means step 29? Install the APP again?
Edit: Omg! Selected Second Rom and now it starts direct in TWRP... And i can't start Primary Rom .....
Really dont try this if u want to save time x)))))))
Not working on redmi 4 indian
Currently I am on redmi 4x global stable miui 9 rom and my device is redmi 4 64gb. Everything goes well. But when I reboot my device it vibrate 5 times and reboot in twrp. I've tried two rom resurrection remix v5.8.5 and viper os, but no any works..
Hi,
Since my post on MiUi forums got taken down (reason-against the rules ?!?) , and I don't have enough permission to post in the dev sections, I am posting this here.
As the title suggests the following is nethunter able to run on MiUi marshmallow (tested on epic rom), just flash the provided zip over current MiUi mm rom and voila ! Have fun
**NOTE --> If wifi doesn't work even after flashing mod-mm.zip, just head over to /lib/nodules, rename wlan1.ko to wlan.ko, create a new folder in the same directory and name it "pronto" and then copy the now wlan.ko into pronto and rename this time to "pronto_wlan.ko"
The only difference in other nethunter and this one is, it is for MiUi marshmallow.
*based on radon kernel
*hid patch credits zetsubou kernel
Here are the downloads -->
https :// goo.gl/ TsrPnc
https :// goo.gl/ BTkUJU
**I just made an account to post this, so I am not allowed to post links, sorry for inconvenience
screenshots plese
**NOTE --> If wifi doesn't work even after flashing mod-mm.zip, just head over to /lib/nodules, rename wlan1.ko to wlan.ko, create a new folder in the same directory and name it "pronto" and then copy the now wlan.ko into pronto and rename this time to "pronto_wlan.ko"
The only difference in other nethunter and this one is, it is for MiUi marshmallow.
*based on radon kernel
*hid patch credits zetsubou kernel
Here are the downloads -->
https://goo.gl/TsrPnc
https://goo.gl/BTkUJU
for those who are lazy for download links
also gr8 work including wifi fix
working fine installed on epic rom 7.7.20
for those who want flashing order
here is order
1. clean installed miui epic rom global beta (completed setup added account flashed supersu)
2.backup backup backup backup epic rom in case something goes wrong
3.then rebooted to recovery flashed nethunter zip
4.then installed mod mi-mm(fix of wifi for me dosnt work done as above got wifi working)
5.reboot voila
based on radon 5.4 miui version
nethunter stock rom
enjoy will post screens later
links aren't working .
[email protected] said:
**NOTE --> If wifi doesn't work even after flashing mod-mm.zip, just head over to /lib/nodules, rename wlan1.ko to wlan.ko, create a new folder in the same directory and name it "pronto" and then copy the now wlan.ko into pronto and rename this time to "pronto_wlan.ko"
The only difference in other nethunter and this one is, it is for MiUi marshmallow.
*based on radon kernel
*hid patch credits zetsubou kernel
Here are the downloads -->
https://goo.gl/TsrPnc
https://goo.gl/BTkUJU
for those who are lazy for download links
also gr8 work including wifi fix
working fine installed on epic rom 7.7.20
for those who want flashing order
here is order
1. clean installed miui epic rom global beta (completed setup added account flashed supersu)
2.backup backup backup backup epic rom in case something goes wrong
3.then rebooted to recovery flashed nethunter zip
4.then installed mod mi-mm(fix of wifi for me dosnt work done as above got wifi working)
5.reboot voila
based on radon 5.4 miui version
nethunter stock rom
enjoy will post screens later
Click to expand...
Click to collapse
OK sur, thenku a lot.
Kids this days ;_; @sarveshrulz
UPDATE - Pixel Experience Official is out for Kenzo. Link attached below. Ongoing support for GSI users though.
https://forum.xda-developers.com/redmi-note-3/development/rom-pixel-experience-t3835648
-------------------------------------------
Disclaimer: I'm not responsible for bricked devices, flash at your own risk. I might be able to help with restoring your device though.
This is a guide to installing Android GSI on Redmi Note 3 (Kenzo)
---------------------------------------------------
What works-
RIL
GPS
Camera
Pretty much everything
What doesn't work-
Bluetooth
Hotspot
VoLTE(I couldn't test)
(NOTE - Bugs vary GSI to GSI)
---------------------------------------------------
Required files -
Grab these files first, and keep them on your SD card
TWRP Treble - https://androidfilehost.com/?fid=5862345805528059847
Android GSI(USE ARM64 A-ONLY) - for this tutorial, I'm using Phhusson's AOSP Pie GSI found here - https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
List of GSI's - https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Pie GApps (If using Pie GSI) - https://forum.xda-developers.com/android/development/gapps-unofficial-opengapps-builds-t3828141
Vendor Image - https://androidfilehost.com/?fid=1322778262903993757
Permissive SELinux Enabler - https://drive.google.com/file/d/1KFdPH2JGtvkXwt2emxPb-k7zdv2pLd-F/view?usp=drivesdk
Magisk 16.7 (minimum 16.7, you can use 17 as well)- https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Latest Firmware - https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361/page176
Optional - Digital Well-being (ONLY FOR PIE)
Digital Well-being apk (Download latest version) - https://www.apkmirror.com/apk/googl...wellbeing-0-2-207862754-android-apk-download/
Digital Well-being Magisk Module - https://drive.google.com/file/d/1AAFMWbAAK-febiP9h4iZMJONEHXopmEU/view?usp=drivesdk
--------------------------------------------
Assuming you have an unlocked bootloader, and know your way in and around Android, let's begin!
How to install -
1. First, flash the Treble enabled TWRP.
2. Reboot to recovery.
3. Mount all partitions, and wipe all partitions.
4. Flash the Vendor Image zip file and immediately flash the Permissive SELinux Enabler.
5. Clear Dalvik/Cache.
6. Mount all partitions, and wipe system.
7. Flash GSI to System partition *only*.
8. Reboot to System.
9. Reboot to recovery.
10. Perform a factory data reset, and flash GApps
11. Reboot to System, and complete setup.
12. After completing setup, reboot to recovery and flash Magisk 16.7
13. Reboot to System
14 Reboot to recovery and flash firmware.
15. Profit!
If you want Digital Well-being (ONLY FOR PIE) -
16. Install Digital Well-being apk
17. Flash Digital Well-being Magisk Module through Magisk Manager
18. Reboot
19. Profit!
-------------------------------------------------------
Tested on Snapdragon version, don't know if it works on MTK.
Screenshots are attached.
Fixes -
If you have the QS toggles moving out of the header like the screenshot attached in #1, do the following steps
1. Enable Developer Settings,
2. Find Smallest Width setting
3. Increase the value by 20. (If it's 360, make it 380)
4. Profit!
------------------------------------------
Google Camera + Face Unlock fix.
If Google Camera/Face Unlock doesn't work for you, do the following -
1. Reboot to recovery
2. Mount system
3. Flash the zip file (download link below)
4. Clear cache
5. Reboot to system
This should make Face Unlock work again, and GCam work as well.
Download patch - https://drive.google.com/file/d/17OUBxhsfeK0625_pYe8aRNr5L6doKdAK/view?usp=drivesdk
------------------------------------------
Can't find Smart Lock in settings?
1. Go to Settings < Security and Location.
2. Scroll down and click Advanced.
3. Click Trust Agents.
4. Switch on Trust Agent for Smart Lock.
You should now have Smart Lock option below Fingerprint.
-------------------++++++++++++++++-----------------------
For Changing accent colours -
Download this file - https://t.me/kenzousersglobal/1169
1. Flash it in recovery
2. Reboot to system
3. Go to Settings - Display - Advanced. Scroll down to find "Colour Theme"
4. Select colour theme and select colour of your choice.
5. Profit!
---------------------------------
Custom kernels that currently work
Radon - https://drive.google.com/file/d/1LYggpHDVph1fvWctIKY4FqQwtRb6Svh0/view
---------------------------------
Review - after extensive testing, I found this to be daily driver material, with the only exception being Bluetooth, Hotspot, and VoLTE(I couldn't test it myself)
Special thanks to - @corkiejp
Is it possible to get an Overlay Patch for Mi 8?
NielsvdS said:
Is it possible to get an Overlay Patch for Mi 8?
Click to expand...
Click to collapse
I honestly have no clue. I have only gathered all the patches and files for Kenzo and made them into one guide.
Thanks for the guide: -
Digital Well-being apk (Download latest version) <<<< Links to the overlay zip and not the apk.
Sourced the beta of apkmirror: - https://www.apkmirror.com/apk/googl...wellbeing-0-2-207862754-android-apk-download/
I used Mind the Gapps found on Telegram, when flashing.
Is it possible to dirty flash open gapps?
Work on kate devices?
Why is it there system.img.xz should I remove .xz rename it
---------- Post added at 04:24 PM ---------- Previous post was at 03:42 PM ----------
1.flashed carlosvendor.zip
2.mounted system vendor cache
3.flshed system.img as system image
After rebooting stuck at fastboot logo
sharan565 said:
Why is it there system.img.xz should I remove .xz rename it
---------- Post added at 04:24 PM ---------- Previous post was at 03:42 PM ----------
1.flashed carlosvendor.zip
2.mounted system vendor cache
3.flshed system.img as system image
After rebooting stuck at fastboot logo
Click to expand...
Click to collapse
You need to extract the image file from that compressed format, use windows are download an app that will extract it.
Suggestion RAR from play: - com.rarlab.rar or alternative app that will do the same.
corkiejp said:
You need to extract the image file from that compressed format, use windows are download an app that will extract it.
Suggestion RAR from play: - com.rarlab.rar or alternative app that will do the same.
Click to expand...
Click to collapse
Thanks man I will try
Hey @Sid127, this is really nicely written tutorial, thank you What bothers me, why we need to mount partitions once again in step 6? Partitions were mounted in step 3 and there wasn't any reboot in meanwhile.
3. Mount all partitions, and wipe all partitions.
4. Flash the Vendor Image zip file.
5. Clear Dalvik/Cache.
6. Mount all partitions, and wipe system.
7. Flash GSI to System partition *only*.
Click to expand...
Click to collapse
Second question, maybe easier... If I have existing TWRP backup for non treble ROM, is it OK to restore such backup using Treble recovery after wiping everything? Or it's recommended to flash previous recovery first?
wxtester said:
Hey @Sid127, this is really nicely written tutorial, thank you What bothers me, why we need to mount partitions once again in step 6? Partitions were mounted in step 3 and there wasn't any reboot in meanwhile.
Second question, maybe easier... If I have existing TWRP backup for non treble ROM, is it OK to restore such backup using Treble recovery after wiping everything? Or it's recommended to flash previous recovery first?
Click to expand...
Click to collapse
1. You just need to make sure that all partitions are mounted.
2. You can restore the backup through Treble TWRP.
Happy flashing!
Hexvessel1992 said:
Work on kate devices?
Click to expand...
Click to collapse
I don't know, I need someone to test it. It should work, since the Vendor for Kenzo and Kate are the same.
corkiejp said:
Thanks for the guide: -
Digital Well-being apk (Download latest version) <<<< Links to the overlay zip and not the apk.
Sourced the beta of apkmirror: - https://www.apkmirror.com/apk/googl...wellbeing-0-2-207862754-android-apk-download/
I used Mind the Gapps found on Telegram, when flashing.
Is it possible to dirty flash open gapps?
Click to expand...
Click to collapse
I'll update the thread with the right link
I think it is possible to dirty flash Open Gapps, but it might give bugs, always go for a clean flash
Everything works for me, only thing was that at the first setup it was stuck on "checking for updates". So I tried the method of tapping all sides of the screen (from top-left clockwise to bottom-left) and it skipped the setup. The flashlight is a little wonky, but that's the only thing that was getting in my way. The audio was a little too quiet, so I installed some app on the playstore to gain it. Thanks for such a comprehensive guide! Android Pie is amazing, but development for it on a 3 year old device is even more so!
srishant said:
Everything works for me, only thing was that at the first setup it was stuck on "checking for updates". So I tried the method of tapping all sides of the screen (from top-left clockwise to bottom-left) and it skipped the setup. The flashlight is a little wonky, but that's the only thing that was getting in my way. The audio was a little too quiet, so I installed some app on the playstore to gain it. Thanks for such a comprehensive guide! Android Pie is amazing, but development for it on a 3 year old device is even more so!
Click to expand...
Click to collapse
I had to forage through 4 complex guides, scourge through XDA and Telegram for all the patches, and hence could make such a simple guide. Apparently, devs on the Telegram channel are working on the Bluetooth and VoLTE fix I'll update once that happens!
Bolte
Test n let me know if it works
https://t.me/kenzoromnews/1445
Modify for treble then flash
amog787 said:
Bolte
Test n let me know if it works
https://t.me/kenzoromnews/1445
Modify for treble then flash
Click to expand...
Click to collapse
I did see that, but when I flashed it, it messed upy system and I had to reinstall the GSI. I don't know how to modify it for Treble, could you do it? I'm happy to test. I believe that fix is for Flashavle ZIPs, not for Treble GSIs.
Possible Gcam and stock working patch!
Posted this in AOSP Pie Rom thread, may also work for the GSI?
corkiejp said:
I found Gcam Pie Fix for another device in this thread.
Link to Gcam Pie Fix: - https://drive.google.com/file/d/1D5qvlA-QbQu6xoWpsLPyWquMkS3hxXi3/view
Gcam that I'm using: - https://androidfilehost.com/?fid=673956719939833577
^^^ From this thread, maybe newer versions available.
I was able to setup face unlock after flashing the above fix, you may also need to enable Smart Lock (Google) as a trusted agent.
It is buggy and the face option may not always trigger, plus you need to hold the phone far from you and swipe when the lock symbol appears (no fast unlock options xposed).
Another benefit of flashing another Camera (V 2.0.002) Started working as well. (Don't know if that is the default AOSP camera or something I restored from backup? Could be Snap Camera from LOS).
Click to expand...
Click to collapse
corkiejp said:
Posted this in AOSP Pie Rom thread, may also work for the GSI?
Click to expand...
Click to collapse
Is there also an uninstaller for this fix? I'll test only if there is an uninstaller for it. Last time I tested a fix I had to format data to revert...
Sid127 said:
Is there also an uninstaller for this fix? I'll test only if there is an uninstaller for it. Last time I tested a fix I had to format data to revert...
Click to expand...
Click to collapse
Not that I'm aware of, but this just places/replaces some Lib and Lib64 in system partition.
If your worried about it, back up your system partition, flash the this patch and wipe caches.
If you experience problems, just restore your system partition.
It was reported working by someone else here.
I have been working on a Universal Auto GSI installer script that will currently work with Pixel 3, 3 XL, 3a, 3a XL, 4, 4 XL, and 4a.(Later will support more phones)
In this tutorial, I show you how easy it is to install a GSI ROM using my HighOnAndroid Universal Auto GSI Installer script that can be used on r Pixel 3, 3 XL, 3a, 3a XL, 4, 4 XL, and 4a. And would also work on any phones that have Android 10 "fastbootd", AB Slot Treble support and on Android 10 firmware.
To check if you have "fastbootd", boot into regular fastboot and type, "fastboot reboot fastboot". If it boots into "fastbootd" screen, you will also be able to use this script fine.
You can simply drop this script in a folder along with fastboot files and any GSI image file you want to install.
Video demo:
https://www.youtube.com/watch?v=opDN4HwAk9c
Step 1. Make sure to flash Android 10 stock firmware, you can flash any Android 10. It will NOT WORK on Android 11, so if your already on Android 11, follow my tutorial on how to manually flash stock firmware and flash the last Android 10 firmware:
https://forum.highonandroid.com/t/how-to-unroot-flash-pixel-phone-stock-firmware-manually/191
Step 2. Make sure to unlock your bootloader, follow my universal guide here:
https://highonandroid.com/android-r...bootloader-on-any-android-android-root-101-1/
Step 3. Download HighOnAndroidGSIAutoInstaller_AB_V1.zip and and the GSI image file you want to install.
Step 4. Unzip theHighOnAndroidGSIAutoInstaller_AB_V1.zip, you should get a folder called HighOnAndroidGSIAutoInstaller_AB_V1.
Copy the GSI img file into the new folder. Make sure your GSI file is in "img" format. If it's in "img.xz", "img.7zip", or "img.zip" you will first have to extract it into an img file and copy over.
DownloadHighOnAndroidGSIAutoInstaller_AB_V1.zip:
https://forum.highonandroid.com/t/h...t-for-pixel-3-3-xl-3a-3a-xl-4-4-xl-and-4a/232
Downloading any Android 10 GSI file here:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Step 5. Run the HighOnAndroidGSIAutoInstaller.bat by double-clicking on it.
Step 6. It will ask you for the image filename, copy and paste the image name.
Step 7. If will find out what the active current slot is on your device. If it says, "a", type "a" and hit Enter and likewise with "b". Use lowercase as otherwise it will break the script.
Step 8. After that, the Auto GSI Installer should install your ROM fully.
If something goes wrong, you can always start over, I recommend re-flashing Andrdoid 10 stock firmware and start from scratch.(https://forum.highonandroid.com/c/Universal-Android-Tutorials/19)
You can follow the manual method here also:
https://forum.highonandroid.com/t/how-to-install-gsi-roms-on-3-3-xl-3a-3a-xl-4-4-xl-and-4a/218
Reservrd
zedomax said:
Reservrd
Click to expand...
Click to collapse
Hello does it work with all GSI rom ? I have Coral device (P4XL) tried with Nippon GSI and i have only Google logo
I think that gsi doesn't boot, the one UI right? Try a aosp gsi, using crdroid gsi, works flawless.
I've tried the bliss and havoc builds on my 3xl - incoming text doesn't work on either... Calls, outgoing, everything works except incoming text messages.
When I goto messages setting, chat features it is always trying to establish a connection.
Anyone have any ideas?
Thank you! Worked flawlessly on pixel 4xl(havocos).
Edit: I used the prebuilt havoc installer.
Umidigi Power 3 support
Hello,
will Umidigi Power 3 be supported also?
I've read conflicting info on the vbmeta.img. Not sure if it's universal or unique to each device, but willing to give this a shot and add Magisk in. Will report back after flashing on my 3A.
Edit: The flash was successful and Havoc booted just fine, however mobile data was 'on' but did not work at all, I was also unable to edit or add any APN's in case that was the issue. Great installer overall, just can't live without my data and I wouldn't know how to fix that at this point. Cheers.
cant downloader the zip file havoc
The links on that second forum are dead. Can't download any of those installers!!
do you have a mirror? i cant download it.
Needing to know if anyone has this file. Can't download it.
How to convert a gsi image so that it can be installed on a dynamic partition or super image partition. It may be work for other Android devices. This tool will help you to install gsi image on Dynamic Partition or Super Image Partition.
PC/Laptop
1. Extract GSI_Flasher.zip (or GSI_Flasher_SDCard if you want install GSI from SDCard) >> 3 folder gsi, META-INF, and Scripts
2. Extract Havoc-OS-v3.12-20201230-Official-arm64-ab.img.xz (your GSI file image)
3. Rename gsi to system.img (it must be rename to system.img, if you don"t rename, your phone get bootloop after reboot system)
4. Put <system.img> in gsi folder
5. Repack this 3 folder gsi, META-INF, and Scripts to zip (you can name it, whatever you want)
Credit
@redymedan
@soulr344
@phhusson
@topjohnwu
@ianmacd
Gsi flasher does not work for me, it does not go past the device logo
I am making an application that does this process automatically. Can I publish? I will put due credits
gsuzeda said:
I am making an application that does this process automatically. Can I publish? I will put due credits
Click to expand...
Click to collapse
Fell free to share
Very Good my friend
This option sd card
If system start from sd is possible dual boot?
Create New thread havoc starting from sd this option is usefull for no Format internal sd?
Sorry i read GSI flash from SD no in sd
Edit: moved my comment to main post here: https://forum.xda-developers.com/t/...si-android-10-for-samsung-galaxy-a51.4214501/
LichtEstarossx said:
Gsi flasher does not work for me, it does not go past the device logo
Click to expand...
Click to collapse
Same for me.
I made a zip containing the latest /e/ OS GSI from https://images.ecloud.global/dev/treble_arm64_bvN/ on a Samsung Galaxy S21 (SM-G991B) but no luck : the phone keeps bootlooping.
Here's the displayed message :
Code:
--------------------------------------------------
GSI Flasher
--------------------------------------------------
Extracting script..
-------------------------------------------------- GSI Flasher-------------------------------------------------- Extracting script..Extracted file "/tmp/scripts/script.sh"
Extracted 1 file(s)
Extracting GSI Image..
Extracting GSI Image..Extracted file "/sdcard/.gsi/system.img"
Extracted 1 file(s)
Flashing GSI..
about to run program [/sbin/sh] with 3 args
Flashing GSI..INFO: Successfully flashed sparse image
--------------------------------------------------
Successfully flashed GSI!
NOTE: please wipe data
to avoid issues.
--------------------------------------------------
-------------------------------------------------- Successfully flashed GSI! NOTE: please wipe data to avoid issues.--------------------------------------------------script succeeded: result was [--------------------------------------------------]
Full recovery log is attached.
gsuzeda said:
I am making an application that does this process automatically. Can I publish? I will put due credits
Click to expand...
Click to collapse
Hi gsuzeda ? could you send your app ? thank u so much !!
Thank you so much. worked flawlessly on my Samsung Tab S7+
CVLover said:
Большое спасибо. работал безупречно на моем Samsung Tab S7+
Click to expand...
Click to collapse
CVLover said:
Большое спасибо. работал безупречно на моем Samsung Tab S7+
Click to expand...
Click to collapse
CVLover said:
Thank you so much. worked flawlessly on my Samsung Tab S7+
Click to expand...
Click to collapse
Hello, how does the firmware show itself in use over time?