Related
For those who have AT&T tablets and have issue with using mediahub (it keeps prompting you that there is an update but when clicking OK, Market can't find the update), the trick is to put in your AT&T SIM card (the one that comes with the tab). Market will not find the update until you do so. Even though your original SIM card is not activated, it will still work. Once it finds the update, turn on Wifi and update as usual.
I've also noticed that AT&T tab will appear under Market once you insert the original AT&T SIM (even though it is not activated) and you could access all the AT&T software there.
This doesn't seem to work once you've flashed a Euro rom. I've tried messing with the build prop signature, but I can't get any ATT-specific stuff working, other than the data counter widget.
Now that you have the updated mediahub from AT&T, can you pull the APK off and post it please?
I'm running JMEv4 and I just ripped the MediaHub.apk from the stock ROM. Installed fine, but whenever I try to sign-up, it gives me a location can't be used.
EDIT: Yeah, there's definitely something buggy about it. It's not even loading the thumbnails of movies. And that location error is "Your location is not known or supported." Looks like OP is going to have to upload that updated apk.
agentdr8 said:
This doesn't seem to work once you've flashed a Euro rom. I've tried messing with the build prop signature, but I can't get any ATT-specific stuff working, other than the data counter widget.
Now that you have the updated mediahub from AT&T, can you pull the APK off and post it please?
Click to expand...
Click to collapse
Good to know..Have you tried changing sales_code.dat to ATT? It is the current value on origin AT&T tab. You will also need to Clear data under Market, MediaHub and Media storage. Not sure if you need to reboot.
Dunno which version this one is but it is from the most recent AT&T tablet and it's working (this is after the update prompt from market).
Here is build.prop that works with the above MediaHub.apk
Cool! I'll give it a try!
EDIT: Same issue as I had with my APK. Gotta be some other setting. I even changed the sales_code.dat to ATT from KOR.
What is ATT MediaHub? can someone please explain.
Thanks
dg5976 said:
What is ATT MediaHub? can someone please explain.
Thanks
Click to expand...
Click to collapse
It is like itunes for the tab. The reason everyone wants to get this to work is because ATT tabs came with a $50 credit towards movie rentals.
The problem is that once you flash your rom you can't update Media Hub and you can't sign into media hub anymore.
There is a nice group of us that have this $50 credit and can't use it. Kind of pissing me off personally. Still trying to find a fix for this.
Thanks everyone who is trying.
silversubie said:
Dunno which version this one is but it is from the most recent AT&T tablet and it's working (this is after the update prompt from market).
Click to expand...
Click to collapse
Just tried this APK and it still prompts for an update from the market (of which it can't find). This is with the build.prop that was posted as well. TiBu shows this MediaHub as version 108.
silversubie said:
Dunno which version this one is but it is from the most recent AT&T tablet and it's working (this is after the update prompt from market).
Click to expand...
Click to collapse
Where did you pull that from (out of curiousity)?
JaysFreaky said:
Where did you pull that from (out of curiousity)?
Click to expand...
Click to collapse
From the virgin AT&T tab /system/app/ after I upgraded MediaHub when was prompted.
agentdr8 said:
This doesn't seem to work once you've flashed a Euro rom. I've tried messing with the build prop signature, but I can't get any ATT-specific stuff working, other than the data counter widget.
Now that you have the updated mediahub from AT&T, can you pull the APK off and post it please?
Click to expand...
Click to collapse
I'm using JME and the attached MediaHub and build.prop. I can't update but I could use MediaHub. The trick is turn off Wifi (so it won't prompt you for update), launch MH, turn Wifi back on and enjoy
Hm. Do you happen to see another MH.apk inside /data/app?
Did you install the build.prop into the system directory on JME firmware? What do I need to do to get it to work on JME firmware?
JaysFreaky said:
Hm. Do you happen to see another MH.apk inside /data/app?
Click to expand...
Click to collapse
Here we go...unzip and drop it into/replace the one in /data/app/
silversubie said:
Here we go...unzip and drop it into/replace the one in /data/app/
Click to expand...
Click to collapse
Hm. Still having the same problem I was originally having.
Anyone else have luck with the JME rom?
Here are the steps for me on JME v4
1. Install MediaHub posted by OP
2. Replace builds.prop with OP's
3. Update sales_code.dat to ATT (not sure if this is needed but I did it)
4. Clear data/cache for MediaHub, Market and Media Storage
5. Replace /data/app/com.sdgtl.mediahub.p1.att-1.apk with OP's
6. Start MH
It is no longer prompt me to update. I haven't bought anything but I could watch preview clip fine.
quattr0 said:
Here are the steps for me on JME v4
1. Install MediaHub posted by OP
2. Replace builds.prop with OP's
3. Update sales_code.dat to ATT (not sure if this is needed but I did it)
4. Clear data/cache for MediaHub, Market and Media Storage
5. Replace /data/app/com.sdgtl.mediahub.p1.att-1.apk with OP's
6. Start MH
It is no longer prompt me to update. I haven't bought anything but I could watch preview clip fine.
Click to expand...
Click to collapse
Wow! That actually worked! Thanks both of you guys!
Couple of quick questions for those of us who don't know the file structure yet:
Where do I put the builds.prop file?
How do you update the sales_code.dat file?
Thanks,
Richard
I have a few questions regarding Kies, Contacts, and USB mode to all the pro's out there -
I only get the following option when I connect the phone to the PC Settings --> USB Mode--> USB Mass Storage. Is this normal or should there be more options offered such as - Kies, PC Studio, Mass Storage? The Galaxy S (Captivate) offered a prompt as to which mode you wanted to connect the phone in whenever it was plugged in. I don't get any option like that. As soon as the device is plugged in (in idle mode) a window pops- up --> MTP Application - Connected (Press the home key to quit Samsung Kies)
Is there a specific way I need to connect the phone in to Kies? Kies displays only 2 options to me -
Add file to GT-I9100
Add folder to GT-I9100
I have tried 2 different computers, but its the same on both of them. I am using Kies version 2.0.1.11053_99 (which according to Kies is the latest version)
Display Options under Contacts shows only Phone and Google. it does not display SIM. I have already reset the phone once. Do I need to do something else? Since I am new to the forum, I am unable to add any screenshot links. But if someone can help me, I would gladly PM them the screenshots. Or you could look at photobucket for my album under nit407.
Thanks for your help.
-Nitin
Ok OP, in order for Kies to see the GSII you need to be on kies mode.
Make sure first this box is unchecked, go to: Settings=>Applications=>Development=>USB Debugging make sure this box is unchecked and then re connect your GSII into your USB cable and open Samsung Kies, it will recognize it immediately.
Good luck.
And make sure you're using the TWLauncher, not a 3rd party launcher.
nit407 said:
Display Options under Contacts shows only Phone and Google. it does not display SIM. I have already reset the phone once. Do I need to do something else? Since I am new to the forum, I am unable to add any screenshot links. But if someone can help me, I would gladly PM them the screenshots. Or you could look at photobucket for my album under nit407.
Thanks for your help.
-Nitin
[/LIST]
Click to expand...
Click to collapse
You can not add contacts directly to the SIM card, neither can see them unless you have copied them to Phone memory/Google. But I have heard that the SIM option is now included in latest 2.3.4 firmware, but as I am yet to test it can't confirm.
Regards.
ithehappy said:
You can not add contacts directly to the SIM card, neither can see them unless you have copied them to Phone memory/Google. But I have heard that the SIM option is now included in latest 2.3.4 firmware, but as I am yet to test it can't confirm.
Regards.
Click to expand...
Click to collapse
Thanks dude. Any ideas on my other questions/problems? I am running everything stock including the launcher and the USB Debugging mode is "unchecked". Is there a specific version of Kies that needs to be used?
nit407 said:
I have a few questions regarding Kies, Contacts, and USB mode to all the pro's out there -
Display Options under Contacts shows only Phone and Google. it does not display SIM. I have already reset the phone once. Do I need to do something else? Since I am new to the forum, I am unable to add any screenshot links. But if someone can help me, I would gladly PM them the screenshots. Or you could look at photobucket for my album under nit407.
Dont know why that is export or import to SIM card has been available on my phone from day one on many firmwares through Contacts menu import/export to from Sim card .
jje
Click to expand...
Click to collapse
JJEgan said:
nit407 said:
I have a few questions regarding Kies, Contacts, and USB mode to all the pro's out there -
Display Options under Contacts shows only Phone and Google. it does not display SIM. I have already reset the phone once. Do I need to do something else? Since I am new to the forum, I am unable to add any screenshot links. But if someone can help me, I would gladly PM them the screenshots. Or you could look at photobucket for my album under nit407.
Dont know why that is export or import to SIM card has been available on my phone from day one on many firmwares through Contacts menu import/export to from Sim card .
jje
Click to expand...
Click to collapse
The import/export is working fine for me. The display options does not show the SIM as an available option. What do you see in yours under - Contacts ->Display Options->Selects Contacts to Display? Do you see SIM there?
Click to expand...
Click to collapse
chestvrg said:
Ok OP, in order for Kies to see the GSII you need to be on kies mode.
Make sure first this box is unchecked, go to: Settings=>Applications=>Development=>USB Debugging make sure this box is unchecked and then re connect your GSII into your USB cable and open Samsung Kies, it will recognize it immediately.
Good luck.
Click to expand...
Click to collapse
My KIES doesn't work anymore ive asked the question a few times but no one seems to know why, ive done what you've said (Settings=>Applications=>Development=>USB Debugging), ive tried on 3 different browsers, a couple of different internet connections, turned off firewall,etc,etc but every time it just times out when i try and connect on my laptop, it has only ever worked once for me, im running cognition 1.15.
I don't find KIES a necessity but it would be nice if it worked (and to find out how to get it working!!)
nit407 said:
JJEgan said:
The import/export is working fine for me. The display options does not show the SIM as an available option. What do you see in yours under - Contacts ->Display Options->Selects Contacts to Display? Do you see SIM there?
Click to expand...
Click to collapse
Contacts >> Menu Button >> Display >> Phone ,Sim , Google
I wonder if you use the Sim import or export will it then show up .
jje
Click to expand...
Click to collapse
jonny68 said:
My KIES doesn't work anymore ive asked the question a few times but no one seems to know why, ive done what you've said (Settings=>Applications=>Development=>USB Debugging), ive tried on 3 different browsers, a couple of different internet connections, turned off firewall,etc,etc but every time it just times out when i try and connect on my laptop, it has only ever worked once for me, im running cognition 1.15.
I don't find KIES a necessity but it would be nice if it worked (and to find out how to get it working!!)
Click to expand...
Click to collapse
I dont know if it is the rom problem or what,,,but many users with stock rom also had this problem,,,,just uninstall kies,,,then delete the remaining kies files(there are files left even after uninstallation in the kies folder),,then reinstall the latest kies,,,conecct ur phone to ur pc(usb debugging unchecked)it ll reinstall ur phone's drivers,,and all should be fine then.
there are many complaints of kies not working fine on laptops,,,but if u use a desktop it ll definitely work...
Hope that helps.
Godspeed.
guitarmafia said:
I dont know if it is the rom problem or what,,,but many users with stock rom also had this problem,,,,just uninstall kies,,,then delete the remaining kies files(there are files left even after uninstallation in the kies folder),,then reinstall the latest kies,,,conecct ur phone to ur pc(usb debugging unchecked)it ll reinstall ur phone's drivers,,and all should be fine then.
there are many complaints of kies not working fine on laptops,,,but if u use a desktop it ll definitely work...
Hope that helps.
Godspeed.
Click to expand...
Click to collapse
Thanks guitarmafia. I am trying this on my desktop now. Regarding firmware upgrade, when I click on "Check for Updates", I get a message "Connection to Server Failed". I am in the US with an unlocked S2 from India. Would that be the reason or just because Samsung hasn't release the new version officially yet. Any idea?
nit407 said:
Thanks guitarmafia. I am trying this on my desktop now. Regarding firmware upgrade, when I click on "Check for Updates", I get a message "Connection to Server Failed". I am in the US with an unlocked S2 from India. Would that be the reason or just because Samsung hasn't release the new version officially yet. Any idea?
Click to expand...
Click to collapse
Desktop also doesn't work This was a clean install on a different machine. Any ideas or suggestions?
When you guys are connecting to Kies, do you chose from an option as to how you want the phone to connect?
nit407 said:
Thanks guitarmafia. I am trying this on my desktop now. Regarding firmware upgrade, when I click on "Check for Updates", I get a message "Connection to Server Failed". I am in the US with an unlocked S2 from India. Would that be the reason or just because Samsung hasn't release the new version officially yet. Any idea?
Click to expand...
Click to collapse
U should use Odin for the firmware upgrade....Kies alwayz had issues,,,for some it works fine,,while for others it never worked,,,IMO it has something to do with Win7,,,some ppl claimed it works fine on XP SP3....I tried a million times on Win7 to upgrade but it alwayz failed,,,,moreover it may brick ur phone(u cant alwayz be lucky)...u can claim warranty,,,,,but why to take risK??
nit407 said:
Desktop also doesn't work This was a clean install on a different machine. Any ideas or suggestions?
When you guys are connecting to Kies, do you chose from an option as to how you want the phone to connect?
Click to expand...
Click to collapse
What os are u using??.....also check if ur phone is properly connected to ur pc(it should open in mass storage mode on ur pc)
Do you have the link handy for Odin? I have tried this on all XP machines.
nit407 said:
Do you have the link handy for Odin? I have tried this on all XP machines.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1075278
there u go...
It looks a bit tough but its quite easy once u read it....
Godspeed.
i got this message in some games like NOVA 3 , WILD BLOOD in my note3 3g
are there a way to fix it
acad222 said:
i got this message in some games like NOVA 3 , WILD BLOOD in my note3 3g
are there a way to fix it
Click to expand...
Click to collapse
If you tried reinstalling it and it doesn't work still...
1. Try a stock reflash and try again.
2. If it still doesn't work, mail the developer and ask them.
how can do stock reflash
if you have a tut. link
thanks
acad222 said:
how can do stock reflash
if you have a tut. link
thanks
Click to expand...
Click to collapse
By note 3 3g I will assume you have the SM-N900?
nicholaschum said:
By note 3 3g I will assume you have the SM-N900?
Click to expand...
Click to collapse
yes i have SM-N900 in android 4.4.2
what can i do
acad222 said:
yes i have SM-N900 in android 4.4.2
what can i do
Click to expand...
Click to collapse
1. Download Odin: https://mega.co.nz/#!QEZGhYza!xkxcPdNZJ7-vDRGM-7OQAw4j-PS8akVtIpnSct7-o04
2. Browse in http://www.sammobile.com/firmwares/ and type in SM-N900, pick your region and download the file.
3. Put the file you downloaded from Sammobile into Odin's AP slot after making sure you put your phone in Download Mode (Power off your phone. Hold down power, volume down, home. Then click Volume down to continue.
4. Click Start.
This will bring you back to stock. If this doesn't work for your games, you will have to contact the developer.
I don't think it's a firmware related issue.
Did you download it from the store or some other sources?
If you got it from other sources, make sure your copied the obb file correctly to the obb directory.
Also please do have an active internet connection as games like this tend to check if the files you have are complete, at least once.
Graffiti Exploit said:
I don't think it's a firmware related issue.
Did you download it from the store or some other sources?
If you got it from other sources, make sure your copied the obb file correctly to the obb directory.
Also please do have an active internet connection as games like this tend to check if the files you have are complete, at least once.
Click to expand...
Click to collapse
Won't hurt to try. He could be stuck on an outdated firmware as well.
Graffiti Exploit said:
I don't think it's a firmware related issue.
Did you download it from the store or some other sources?
If you got it from other sources, make sure your copied the obb file correctly to the obb directory.
Also please do have an active internet connection as games like this tend to check if the files you have are complete, at least once.
Click to expand...
Click to collapse
i download other sources my obb file is move correctly my internet connection connected properly
som other game work good like six guns, MC4 , gangster
acad222 said:
i download other sources my obb file is move correctly my internet connection connected properly
som other game work good like six guns, MC4 , gangster
Click to expand...
Click to collapse
But did you install it correctly? Moving it correctly is not 100% effective as well as I have experienced it. Lol.
Anyways, did you do these?:
1. Install apk. Don't open game.
2. Copy obb game folder file to Android/obb folder
3. Launch game with internet connection.
4. Enjoy.
nicholaschum said:
Won't hurt to try. He could be stuck on an outdated firmware as well.
Click to expand...
Click to collapse
You are right. It can be. But I have experienced this quite often and I have learned a lot from my mistakes. Lol.
Instead of starting a new topic, I will reply here.
I got this strange message today. "Unfortunately phone has stopped" while I was getting some chat messages downloaded in Whatsapp..
I on dr.ketan l22.1 rom with pekaka kernel 3.2
Tried everything to remove the message, but it wont let me do anything..
Finally going to erase entire data/cache/dalvik cache and try..
Any idea why this happened ?
I am on SMN900.
Thank You.
---------- Post added at 03:52 PM ---------- Previous post was at 03:04 PM ----------
Recovered using the method above.. but just scratching my head.
Any idea why this happened ?
Need HELP @ Note 3 ( SM-N9002 / SM-N9009 ) SIM2 Call Audio/Mic Routing & MagMa-NX ROM
Got my hands on this one beautiful piece of Samsung Galaxy Note3 SM-N9002 Dual-Sim, and it had this odd version of Chinese samsung rom on it, as it comes from factory, half apps installed that comes with it was in Chinese and had no play store etc and was on 4.xx android, so I went and did my research, found working TWRP, managed to install it OK, then tried few beautiful ROM versions and found MagMa-NX (note7 ported ROM) works wonderfully well, zero crashes etc etc and it also has kernel support for SM-N9002 during installation which I chose to use, all features work 100% and everything works ok, all but SIM#2 call audio.
I mean, I have signal on both sim cards simultaneously OK, I can make and receive calls and all would seem ok, but when dialed to or from SIM#2 there is no audio coming out from earpiece or loudspeaker and mic dont seem to activate as even if I try to record call which feels like muted for both caller and receiver ends, call audio recorder while recording does not pick up any sound trough phone microphones, so I think its something to do with settings in some file not done right or else I dont know what I could be doing wrong.
both sim cards worked 100% ok before ROM flash, but now I'm lost because I cant even flash back to old stock rom, and yes I have gathered original android 4.xx rom but it fails flashing via ODIN every time, so my best bet is on doing some DIY on current MagMa-NX note7 port rom... I wonder if there are any fellows who I could buy the paypal-beer for great help sorting me out on this DIY project? Please PM me or post here if you feel like you could collaborate in resolving this dilemma for me... would highly appreciate folks
I will keep an eye out
I think I figured something. Everytime I attempt to make a phone call on this, I get to choose from which sim card should I dial, #1 or #2 , but what I have noticed now is that I am being asked "SIM1" or "Slot2" ... SLOT 2 I thought? That may be the reason that audio routing doesnt work well for this... tried searching build.prop but this string is not there and I just dont know where to search for this string to get this fixed, anybody can chime in?
Thanks
Did you figure it out ? As i have the same problem with the same rom in addition that when i call anyone and he is on a call i don't get notified with " call waiting
Mr.Ultimate said:
Got my hands on this one beautiful piece of Samsung Galaxy Note3 SM-N9002 Dual-Sim, and it had this odd version of Chinese samsung rom on it, as it comes from factory, half apps installed that comes with it was in Chinese and had no play store etc and was on 4.xx android, so I went and did my research, found working TWRP, managed to install it OK, then tried few beautiful ROM versions and found MagMa-NX (note7 ported ROM) works wonderfully well, zero crashes etc etc and it also has kernel support for SM-N9002 during installation which I chose to use, all features work 100% and everything works ok, all but SIM#2 call audio.
I mean, I have signal on both sim cards simultaneously OK, I can make and receive calls and all would seem ok, but when dialed to or from SIM#2 there is no audio coming out from earpiece or loudspeaker and mic dont seem to activate as even if I try to record call which feels like muted for both caller and receiver ends, call audio recorder while recording does not pick up any sound trough phone microphones, so I think its something to do with settings in some file not done right or else I dont know what I could be doing wrong.
both sim cards worked 100% ok before ROM flash, but now I'm lost because I cant even flash back to old stock rom, and yes I have gathered original android 4.xx rom but it fails flashing via ODIN every time, so my best bet is on doing some DIY on current MagMa-NX note7 port rom... I wonder if there are any fellows who I could buy the paypal-beer for great help sorting me out on this DIY project? Please PM me or post here if you feel like you could collaborate in resolving this dilemma for me... would highly appreciate folks
I will keep an eye out
Click to expand...
Click to collapse
Which CSC did you choose?
I did not figure anything out guys... as I was trying to get this working, I tried every CSC option possible... none worked. Which should have been the one that's working for this models?
in fact Im thinking of selling this beauty of note3, its almost new... in case someone interested I have it... because I would love note7 port rom on this, and nothing else... PS I could live with it being just single-sim option, it works but not perfect as sim #2 is useless then... signal there and texts only works for it as described above...
at the moment its on stock adroid 5.0 and its all 100% ok and fine, flawless, but its boring!
Mr.Ultimate said:
I did not figure anything out guys... as I was trying to get this working, I tried every CSC option possible... none worked. Which should have been the one that's working for this models?
in fact Im thinking of selling this beauty of note3, its almost new... in case someone interested I have it... because I would love note7 port rom on this, and nothing else... PS I could live with it being just single-sim option, it works but not perfect as sim #2 is useless then... signal there and texts only works for it as described above...
at the moment its on stock adroid 5.0 and its all 100% ok and fine, flawless, but its boring!
Click to expand...
Click to collapse
Well, i know that mixer paths are different on single sim and dual sim phones.
Can you extract from stock rom the file "/system/etc/mixer_paths.xml" and overwrite the one in custom rom ?
I think I tried something similar if not exact with no success .. let me repeat the process just in case...
PS also, I will try and dump both versions of these files. Is there anything else I may need to dump from stock rom 5.0 rom?
Mr.Ultimate said:
I think I tried something similar if not exact with no success .. let me repeat the process just in case...
PS also, I will try and dump both versions of these files. Is there anything else I may need to dump from stock rom 5.0 rom?
Click to expand...
Click to collapse
There are some specific binaries and libs, but i'm pretty sure magma rom already inject them during flash when you select n9002 as variant.
Dumping the CSC folder is a good idea too.
zlazaar said:
There are some specific binaries and libs, but i'm pretty sure magma rom already inject them during flash when you select n9002 as variant.
Dumping the CSC folder is a good idea too.
Click to expand...
Click to collapse
cool, which is the csc folder to be exact? will there should there be any conflicts between 5.0 stock android and 6.0 in magma rom when doing CSC trick?
thanks
Mr.Ultimate said:
cool, which is the csc folder to be exact? will there should there be any conflicts between 5.0 stock android and 6.0 in magma rom when doing CSC trick?
thanks
Click to expand...
Click to collapse
Path : /system/csc
Indeed, conflits may happen. But just dump it and let we examine it.
Ok here is what I managed to try, I backed up stock rom android 5.0 all working state mixer files from etc dir, then flashed magma rom again, backed up those same files for restoration to working state, replaced files with ones extracted while on 5.0 stock android, reboot device, no sound whatsoever, phone wont even buzz keypad dialtones or connect dial phonecalls just hangs. So I went and restored back original magmanx rom mixer files, reboot, but still no success... so now I have just finished restoring 5.0 again, will dump csc folder and share with you. will also need to charge my battery a bit because @ 30% cant expect much to happen when flashing magma nx...
Thanks for the help amigo!!!
Alright, tried merging csc from 5.0 to magmanx 6.0, no luck. then tried after this to merge mixer file from 5.0 to magmanx 6.0 , no luck, back at square1....
files attatched both versions... obviously something wasnt done right from looong time ago and had never been reported, been forgotten... in regards of 9002 users..
https://forum.xda-developers.com/attachment.php?attachmentid=4154927&stc=1&d=1495202856
Mr.Ultimate said:
Alright, tried merging csc from 5.0 to magmanx 6.0, no luck. then tried after this to merge mixer file from 5.0 to magmanx 6.0 , no luck, back at square1....
files attatched both versions... obviously something wasnt done right from looong time ago and had never been reported, been forgotten... in regards of 9002 users..
https://forum.xda-developers.com/attachment.php?attachmentid=4154927&stc=1&d=1495202856
Click to expand...
Click to collapse
Indeed, the mixer_paths of TW6 is missing the whole part concerning "cp2" (second sim).
I'm not a reel dev but i tried to add missing parts from TW5.
Can you please try the attached mixer_paths on magma ? (don't touch csc).
zlazaar said:
Indeed, the mixer_paths of TW6 is missing the whole part concerning "cp2" (second sim).
I'm not a reel dev but i tried to add missing parts from TW5.
Can you please try the attached mixer_paths on magma ? (don't touch csc).
Click to expand...
Click to collapse
amazing, will try in few mins
no success, exact same fail of global audio post merging files... any more ideas... ? really appreciate your effort man, really do!
Mr.Ultimate said:
no success, exact same fail of global audio post merging files... any more ideas... ? really appreciate your effort man, really do!
Click to expand...
Click to collapse
Did you checked correct permissions before reboot ?
I'm afraid the problem is deeper than mixer paths.
I'll try to digg more.
I enable root explorer in third party file manage, grant permission, copy file from sd card to system/etc, prompt to overwrite -grant, overwrite complete, power off phone from power-button menu, power on, done. is this bad/incorrect procedure? magmanx has root from stock, when I navigate root dir I get access grant prompt, I grant it and then I can modify whatever.
please let me know what else I could do? maybe there are specific files I could look in to dump out of working 5.0 rom? Thanks!
or maybe just directory content filenames that could/would make sense by their name etc?
its weird, I think its something to do with the kernel itself... maybe Im wrong, but I dont think 9002/9008 kernels were ever made properly to be tested thus the errors... I cant even find any other kernels for 9002 other than included in magmanx and it aint working well anyway
Mr.Ultimate said:
I enable root explorer in third party file manage, grant permission, copy file from sd card to system/etc, prompt to overwrite -grant, overwrite complete, power off phone from power-button menu, power on, done. is this bad/incorrect procedure? magmanx has root from stock, when I navigate root dir I get access grant prompt, I grant it and then I can modify whatever.
please let me know what else I could do? maybe there are specific files I could look in to dump out of working 5.0 rom? Thanks!
or maybe just directory content filenames that could/would make sense by their name etc?
its weird, I think its something to do with the kernel itself... maybe Im wrong, but I dont think 9002/9008 kernels were ever made properly to be tested thus the errors... I cant even find any other kernels for 9002 other than included in magmanx and it aint working well anyway
Click to expand...
Click to collapse
The file "mixer_paths.xml" must have permission set to 0644 (like other files in /system/etc directory).
And try darklord Kernel.
6044 is as per read/write permissions for user enabled, as per this link http://permissions-calculator.org/decode/0644/ , I assume these permissions will auto set after moving replacing file do they not?
Where do I obtain the darklord kernel? I was pretty sure it comes with it... let me re-do the rom and take some snips as I go
Mr.Ultimate said:
6044 is as per read/write permissions for user enabled, as per this link http://permissions-calculator.org/decode/0644/ , I assume these permissions will auto set after moving replacing file do they not?
Where do I obtain the darklord kernel? I was pretty sure it comes with it... let me re-do the rom and take some snips as I go
Click to expand...
Click to collapse
Sorry i just noticed you already have darklord kernel.
And set permission like other files in this directory (if not already done by your file manager).
Hi...any infos about that new version released yesterday on Firmware Finder
in the release note,its the same text as all previous version...
no informations about whats new/fixed ect
virusdunil said:
Hi...any infos about that new version released yesterday on Firmware Finder
in the release note,its the same text as all previous version...
no informations about whats new/fixed ect
Click to expand...
Click to collapse
Installing now. Let ya know if any big changes, anybody check and see if there's a new hw package update as well to go with?
I dont think so...theme manager still now working... and after flashing,phone still say on c654b300
So...what do you think of new firmware ?...
Personnally,i often have to reboot phone so changes ,like in sound,notification can be changed...also when passing to wifi to data,i also have to shut down wifi then reboot so data will turn on..
Theme manager ,no way to make it work
Ive found theres almost no lag compared to previous firmware,changes have been made to lockscreen ( personnal infos in the middle instead of on top of image)...
When cleaning the phone via app,settings are always ****ed up and have to re do them like, to not shut down facebook/messenger to receive notifications well,after clean up,i have to re do all settings...
Dunno what huawei is trying to do but, There is always something not working.
Also,Aida64 says its a Release Key version...when looking in the Android tab...
Attached are some pics...the firmware is supposed to be C654B334 but shows C654B300...
virusdunil said:
Attached are some pics...the firmware is supposed to be C654B334 but shows C654B300...
Click to expand...
Click to collapse
Try this functionality update to get the Build number showing up as MLA-L03C654B334: http://update.hicloud.com:8180/TDS/...ers_ca/update_data_full_MLA-L03_rogers_ca.zip Install it using the three button method after extracting all the files and putting them in a dload folder and then putting that on your SD Card.
Hi...what will it do ?
Only change the build nuber or other things are included ?
Thanks
virusdunil said:
Hi...what will it do ?
Only change the build nuber or other things are included ?
Thanks
Click to expand...
Click to collapse
It should fix a couple of minor issues I am not sure what tho and yes the Build number too. When I on the CAN-L01C432B320 build for my phone and updated to CAN-L01C432B340 it was still showing up as CAN-L01C432B320 until I installed the smaller update for my phone.
Thanks...did the update...now 334...
Ill see if it did something
Heres a thing that really bugs me...
If i look into the update folders once extract,i can see some themes / pictures in ... C:\Users\portable\Documents\update_data_full_MLA-L03_rogers_ca\data\hw_init\version\region_comm\oversea
why is theme manager / magazine still dont / never works ?
and even after installing the update,i dont see the themes and magazine images... There must be something wrong somewhere.
Is Huawei/emui blocking the app intentionally and if so,why ??....Im just trying to understand things.
and most important thing is,when writing to Huawei,we never get real answer...always the same thing....''wait for next update''
also,in the changelog,it clearly says...
''5. If you are not satisfied with the new update, you can roll back to EMUI 4.1. Your personal data will be erased during the rollback.''
Nowhere in the phone's setting (ive searched everywhere) its mentioned a way to revert back to mm6...Also in the 2 or 3 button way it says revert back to mm6 ect.
Could someone give me the real apk name for the (nougat)Emui 5 theme manager apk please ?
My theme manager is there and shows any themes I DL and put in the theme dir. It's not a theme store just a manager. Is it not there at all, or not working properly?
Hi..
Whatever i do in theme manager,it wont work whe applying...
If i dload a emui5 then well when clicking on apply ,its supposed to apply the whole theme...even if i apply thing separately,it wont change at all.