Related
Hey!
I have Windows8 64 bit. I have never faced problem with windows 8 but this time I did. When I was trying to boot windows 8 a boot animation appeared saying : Preparing Automatic Repair and after some seconds "Diagnosing your PC" appeared. I let that for almost 30 minutes. Than a tab appeared saying : Your PC ran to a problem. "We have to restart to fix it. Gathering some info.." and then it reboot within miliseconds. When BIOS info appears on the screen when it boot again then it stuck for 3 seconds and then do same thing over and over again.
I have searched for every fix but they don't work. I will give full information so please do not say.. reinstall floppy disk or whatever :
My computer doesn't have a DVD/CD disk. So I can't put windows 8 disk.
I can't boot into recovery mod or safe as it firstly should be activated.
I haven't tried USB flash driver and tell me how it works please
Please I need it urgent as I have to work on android development. If you click on my signature's image you will understand.
Thanks!
Sent from my GT-S5830i using Tapatalk 2
Boot Windows 8 from a bootable usb.. I had same problem..
rex28818 said:
Boot Windows 8 from a bootable usb.. I had same problem..
Click to expand...
Click to collapse
Please can you tell me how?
Sent from my GT-S5830i using Tapatalk 2
A Big Thanks to @Synthio for providing me these files.Without his help,this guide wouldn't have been possible at all.
Hi Peeps !!
A hard bricked OPX has nothing but a black screen (nothing ever comes on the screen, not even a boot logo ), it might vibrate when a power button is pressed and held for 20 seconds, has no Recovery partition, no adb mode, and no fastboot partition. The device might be detected in Linux and you might be able to even send commands to it. In Windows, the bricked OPX should be detected as QUALCOMM-HS USB Diagnostics xxxx. You might have a bricked OPX as a result of flashing a kernel meant for a different device (or a ROM meant for another device that included a kernel), tinkering with the boot logo or bootloader, or your attempt of unlocking the bootloader resulted in corrupting the boot partition.
The solution for OPX hardbrick is similar to OPO and OP2 - you just need a Qualcomm driver and a recover package.
So,here we go !!
Step 1 :- DOWNLOADS :-
1.) Drivers :- https://www.androidfilehost.com/?fid=24052804347799753 (Extract these files to a folder on desktop.)
2.) Recovery Tool :- https://drive.google.com/folderview?id=0B3gqVK2lYqBiY1M2NjRjVllvYXM&usp=sharing (Download all files inside this folder and put them in a folder on desktop.)
Step 2 :- If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :- http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 sec and while keeping it pressed,connect OPX to PC.Hold volume up until your PC finds a new hardware .
Step 5 :- Go to device manager in your PC, find the new "QUALCOMM-HS USB Diagnostics xxxx" device or something like this (It must be Unknown Devices as QHUSB_BULK or under COMs and Ports as Qualcomm xxxx). Update its driver in property page using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder).
Step 6 :- After installing the drivers,"Run As Administrator" the MSMDownloadToolV2.0 in the recovery tools folder.
Step 7 :- Click start at top left corner and wait for it to finish (Download Complete will come)
Step 8 :- Disconnect phone from PC and boot into system.
Now you can again do anything you wish to (unlock bootloader,etc).To unlock bootloader,go to developer options and tick "Enable OEM Unlock" first.
When you will need this guide ? :-
1.) If your phone is totally black (no racism)
2.) When you have locked the bootloader by mistake . (This happens when you flash a rom without having oem unlocking enabled.)
PS:- This method will wipe all data and restore your phone to OxygenOS and English Bootloader.
Thanks.
Hi
Great work!
I finally got a mod to close my thread and it has been closed.
I'll wait for the file that does not wipe /data
Thanks a loot. Gonna try it today at the end of the day.
Enviado do meu SM-N9005 através de Tapatalk
OnePlus*X*Unbrick Tool Mini... Only 47 MB is here :-
https://www.androidfilehost.com/?fid=24269982087019810
It doesn't wipe data either...
Sent from my ONE A2003 using Tapatalk
So if we are having the bootloader unlocked and try this tool to make it lock the bootloader? Means is it possible?
Silverstarjigar said:
So if we are having the bootloader unlocked and try this tool to make it lock the bootloader? Means is it possible?
Click to expand...
Click to collapse
No.It will keep the bootloader unlocked if it is unlocked already.
Man you are the real mvp... Thanks a lot some people i know are really screwed up because of thier opx got hard brick and there was no such guide available thanks alot mate really thanks
Will Try
Welp, ordered a new OPX yesterday. Just searched "qualcomm oneplus x driver" right when I woke up before work today and found this thread and felt stupid but saw it was as recent as today so I was pretty pumped. Thanks, will try ASAP and then can sell my other OPX, the new one or refuse delivery tomorrow . They deliver so fast now! 3 days!
thanks master sifoo.. my opx back to alive now ?
Thanks
Hello
Thank you for your post
I did all what's explained and when I run MSMDownloadToolV2.0 and click start it says "Waiting for device" and nothing happen!
I've been waiting more than 30 mints and nothing actually happen ..
Hope you help me ..
Thanks!
DANETO said:
Hello
Thank you for your post
I did all what's explained and when I run MSMDownloadToolV2.0 and click start it says "Waiting for device" and nothing happen!
I've been waiting more than 30 mints and nothing actually happen ..
Hope you help me ..
Thanks!
Click to expand...
Click to collapse
Can you give me Teamviewer access? I will see what the issue is and solve it.
Sent from my ONE A2003 using Tapatalk
Naman Bhalla said:
Can you give me Teamviewer access? I will see what the issue is and solve it.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
OfCourse
but I'll download it now and I'll tell you once I finished
Thank you
Naman Bhalla said:
OnePlus*X*Unbrick Tool Mini... Only 47 MB is here :-
https://www.androidfilehost.com/?fid=24269982087019810
It doesn't wipe data either...
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
So, if I used this Mini Tool, what would it change on my phone? Kernel, system, etc...
Thank you for your hard work.
DANETO said:
OfCourse
but I'll download it now and I'll tell you once I finished
Thank you
Click to expand...
Click to collapse
Hi !!
Has your issue been solved or you still need help ? I am online for some hours now.
Aphex13 said:
So, if I used this Mini Tool, what would it change on my phone? Kernel, system, etc...
Thank you for your hard work.
Click to expand...
Click to collapse
It will not change system but will restore kernel to stock.
Naman Bhalla said:
Hi !!
Has your issue been solved or you still need help ? I am online for some hours now.
Click to expand...
Click to collapse
I tried to solve it many times but still remains
DANETO said:
I tried to solve it many times but still remains
Click to expand...
Click to collapse
PM me now with Teamviewer ID and pass. I will fix it in any case.
Sent from my ONE A2003 using Tapatalk
Did layers work for anyone??
Sent from my ONE E1003 using Tapatalk
Thanks my phone's alive once again.
Sent from my ONE E1003 using Tapatalk
Sorry for my bad english
Can this tool unbrick any case of hard brick ? For example when I change the fastboot logo ? When I type 'fastboot erase bootloader' ?
Envoyé de mon ONE E1003 en utilisant Tapatalk
How do you flash the redmi pro ?
There are flashing advertisement banners on the top of my home screen whenever connected to wifi or data usage. I have found the virus sits inside the note application that comes installed on the phone therefore I can't get rid of it.
I am told I need to flash it and then reload the software on the phone. I cannot seem to hard reset it as the phone asks to be plugged in instead of giving options
rayperry9 said:
How do you flash the redmi pro ?
There are flashing advertisement banners on the top of my home screen whenever connected to wifi or data usage. I have found the virus sits inside the note application that comes installed on the phone therefore I can't get rid of it.
I am told I need to flash it and then reload the software on the phone. I cannot seem to hard reset it as the phone asks to be plugged in instead of giving options
Click to expand...
Click to collapse
I see no point of virus.
Unlock bootloader then push TWRP then you can flash any ROM you want
stevedat said:
I see no point of virus.
Unlock bootloader then push TWRP then you can flash any ROM you want
Click to expand...
Click to collapse
i have a problem unlocking bootloader.. its stuck @ 50%..it's seems the USB driver isn't compatible with my windows 10..i have download n try an mtk driver but my phone still not detected on mi suite.. do you have any suggestions? many thanks
Sent from my Redmi Pro using Tapatalk
kadalaer said:
i have a problem unlocking bootloader.. its stuck @ 50%..it's seems the USB driver isn't compatible with my windows 10..i have download n try an mtk driver but my phone still not detected on mi suite.. do you have any suggestions? many thanks
Sent from my Redmi Pro using Tapatalk
Click to expand...
Click to collapse
I use Windows 10 and it works flawlessly.
Ensure you have all required drivers installed.
Mi Suit PC not working with MM so far.
I have exactly the same problem!
Someone has said to me you need to go back ot the china developer rom to unlock
Hi,
I downloaded Phoenix OS 64 bit exe. Ran the app, and installed the OS on the same partition "C" on which I have Win 10. As the installation gets done, I restarted the laptop. It asks to boot in to Win 10 or Phoenix OS. I chose Phoenix, but the system rebooted to the same options to choose from Win or Phoenix.
Is there any fix
Hello?
Does grub give any errors after selecting Phoenix? Does any white on black text appear after selecting? Which version do you use and what kind of hardware (CPU/GPU)? Next time give more information from the beginning, maybe you could have gotten more help.
theflippa said:
Does grub give any errors after selecting Phoenix? Does any white on black text appear after selecting? Which version do you use and what kind of hardware (CPU/GPU)? Next time give more information from the beginning, maybe you could have gotten more help.
Click to expand...
Click to collapse
No!
As the Phoenix OS installer finishes the installation, I restarted the Windows. It showed me a screen to select from Win 10 or Phoenix. I chose Phoenix, a white text appear with a black background. Screen kept flashing for 3 to 4 times, without any text. I kept waiting for the Phoenix OS, but it booted me again to the first step to choose from Win or Phoenix.
My BIOS setting is Legacy. I tried to change it to UEFI, it showed me some error that device missing or something.
Laptop Specs:
AMD A8 series APU, 6 GB RAM, 500 GB HDD, Radeon Mobility R5.
BUMP!
I downloaded the ISO file and made a bootable USB with Rufus and it does the same thing just reboots after installation no errors even if I try to boot without installation from the USB it just keeps rebooting I'll try to find a different version tomorrow maybe it'll work
Same, I never got it to work with NTSF...
same thing happened to me.
in my case it shows language selection window and then agreement window, then right after it freezes and computer reboots.
same as me. my laptop is restarting into windows while choosing prime os or phoenix os( i tried both methods with exe file installation or iso for prime os)
the pheonix os i downloaded is the best it boots into the os then the caps lock starts blinking and it reboots back in the selection screen.. i looked online for fixes and everyones saying to turn off the wifi adaptor and use a lan cable. but whats the point of doing this. like honestly remix os does the job but it dosent have the proper keymapper for gaming other then that its great. lets just face it pheonic os is a piece of ****
Hey man, I just faced this issue and can't seem to find any solution so far, so if you've figured a solution for this can you please share it with me ... Thanks.
Android 9.0 on Your MiPad2!
We all hate that Xiaomi didn't update their MiPad 2 to latest Android. Or at least Marshmallow.. but! Today I found a way to get Android 9.0 to boot on our devices . As You know MiPad 2 uses x86_64 CPU which gives us HUGE possibilities. But it's not perfect. It's pretty buggy and booting most OS's is simply impossible. But today, I found a way to boot most likely any OS, INCLUDING ANDROID X86!
Guide:
1. Prepare: At least 8GB USB drive, USB Hub, Keyboard & Mouse, OTG Type C adapter. And make sure that You have at least 50% battery.
2. Download Rufus 2.18 or latest version.
3. Download Android x86_64 7.1 rc2.iso from android-x86.org UPDATE: Use this link for Pie! BlissOS 11.x Pie
4. Open Rufus and plug in Your USB drive.
5. Inside Rufus choose: Partition type GPT for UEFI.
Make sure that Quick Format is selected.
6. Change FreeDOS to ISO Image and choose Your ISO file.
7. Tap start.
8. Plug Your USB drive and keyboard & mouse into Your USB hub and then plug it into Your MiPad 2 through OTG adapter.
9. Turn off Your MiPad 2.
10. Quickly tap F2 button on Your keyboard multiple times and turn on Your MiPad 2.
11. Tap the F2 until You see bios.
12. Inside bios go to Device Management> Security/boot > Change GMIN to Windows and disable secure boot.
13. Tap F10 to save and then go to main BIOS menu and choose boot device.
14. Choose EFI USB drive.
15. When You see Android x86 GRUB menu tap "e" on Your keyboard and find androidboot.hardware=androidx86_64 edit it to make sure it looks like this androidboot.hardware=androidx86_64 nomodeset and then tap F10 to boot.
16. Wait for Android to boot. It will take around 5-15 minutes depending on Your USB drive speed.
17. Enjoy Your MiPad 2 running Latest Android!
Touch works. Yes! WiFi too.
Bugs:
Sound doesn't work in live mode(maybe after installing the Android it would fix the sound.)
Video playback is broken.
Brightness control is broken.
Probably other stuff too. But maybe installing it or trying Bliss OS or Remix OS would help .
Can confirm that Bliss OS with 4.9 kernel boots and works fine too.
Also tried Remix OS 3.0 and it works fine, as well as Ubuntu 17.10. Touch works in all OS's.
ProtoDeVNan0 said:
Android 7.1.2 on Your MiPad2!
Enjoy Your MiPad 2 running Latest Android!
/QUOTE
@ProtoDeVNan0 Sounds very interesting but I have a few questions:
- what I understand is the MI PAD2 boots from USB and runs in Live mode. So does the USB need to be connected al the time?
- does it affect your current MI PAD2 ROM?
- same procedure every time you need to reboot?
- Can from live mode do an install on your tablet (confirmed to work)?
- how is the performance?
But thanks for sharing, sound prommissing
Click to expand...
Click to collapse
@ProtoDeVNan0 Sounds very interesting but I have a few questions:
- what I understand is the MI PAD2 boots from USB and runs in Live mode. So does the USB need to be connected al the time?
- does it affect your current MI PAD2 ROM?
- same procedure every time you need to reboot?
- Can from live mode do an install on your tablet (confirmed to work)?
- how is the performance?
But thanks for sharing, sound prommissing
Edwin184 said:
@ProtoDeVNan0 Sounds very interesting but I have a few questions:
- what I understand is the MI PAD2 boots from USB and runs in Live mode. So does the USB need to be connected al the time?
- does it affect your current MI PAD2 ROM?
- same procedure every time you need to reboot?
- Can from live mode do an install on your tablet (confirmed to work)?
- how is the performance?
But thanks for sharing, sound prommissing
Click to expand...
Click to collapse
It runs from live mode but can be installed as main OS. But then You will lose Android/MIUI.
If You run any of these OS's in Live mode then Your current rom won't be affected.
Depends on what You have installed. Android x86 aftet reboot will boot back to Android x86. And If You reboot from Live mode, it will boot back into GRUB or if You remove Your USB drive it will boot back to MIUI.
Yes. It can be installed. Haven't tried that yet because I was testing all Linux Distros and Android x86 versions but it should work just fine. Just make sure to edit grub to boot every time with nomodeset.
Performance.. it's a bit slower than MIUI. But then again. I used Live mode + extremely slow usb hub which is really bad and installing anything with it takes hours. Even on a high end desktop. But since the general stuff works quite decently. I'd say that if You installed it on Your tablet, then it would run pretty smoothly. And You would get similar Antutu score to MIUI(+/- 5-7k).
Also I tried a lot of linux distros and all of them had touch working. Native resolution worked too.
I might later try different kernels and install Android x86 on my MiPad 2 as default OS to see how it runs.
Do you try to install bliss os or remix os ?
Sounds Sweeeeet!
I am going to try it.
So I wondering now...
- If I try this with INSTALLING, not LIVE MODE, what happens to Recovery Mode and Fastboot Mode? Will they still exist? So that I can backup and restore with TWRP?
-Did you have any bugs with Remix OS 3.0? It would be cool if I can fully use it.
YeonsK said:
I am going to try it.
So I wondering now...
- If I try this with INSTALLING, not LIVE MODE, what happens to Recovery Mode and Fastboot Mode? Will they still exist? So that I can backup and restore with TWRP?
-Did you have any bugs with Remix OS 3.0? It would be cool if I can fully use it.
Click to expand...
Click to collapse
I have tried installing Android x86 but messed up recovery and fastboot partitions really badly. But! Thanks to DNX Fastboot Mode I was able to
fastboot boot loader.efi
fastboot flash gpt gpt.bin
(And then flash all files inside images folder, including oemvars battery disabled or else Your battery will get stuck at 42%)
And my tablet was good again .
Bugs on all OS's are pretty much identical. Like a week ago Bliss OS released Oreo update but it's alpha and it didn't boot on my MP2. And there are bugs like: no sound, rotation not working, brightness doesn't work, etc.
I think some of these could be fixed but these x86 Android OS's are stuck inside .sfs files and repacking them usually makes the rom not boot anymore.
And if You want to try to install Android x86 then I'd recommend to first install Win10 on Your tablet(so that partitions will be changed from Android ones to Windows ones) and then format "C partition/windows partition" and try to install Ax86 into that partition.
Not sure how installation looks like on RemixOS though. It might be easier or the same.
And if You won't remove/format Fastboot or TWRP partition then it should stay there. But installing Win10 will remove them. So You can try manually installing Ax86 and see how it works. Just don't delete partitions that are called: ANDROID_BOOTLOADER or ANDROID_RECOVERY. These most likely contain Fastboot and TWRP.
And if You delete any of these and Your tablet will be dead, then just remove USB cable from Your tablet, hold vol up, vol down, power until You see DNX Fastboot and follow my guide above. And don't worry. MiPad 2 seems to be unbrickable.
Hey guys!
Maybe I'm the noob but anywhere I tried to find bliss rom or remix os 3.0 for mi pad 2 I had no luck with it. Can anyone help me with a link for these roms and a proper gude how to install them? I'm really interested in remix os 3.0 but curious about bliss os as well, cause I've not heard of it yet.
Thanks in advance.
Have a nice day you all
Hi all, I tried almost all recent distros and it works fine to boot in Live mode. All flavours of Mint, ubuntu. I booted up with "nomodeset" option. I did install and now, when I call grub with "Shift" and edit the installed system with nomodeset option, all I got is black screen. If someone installed any distro on MiPad 2, can someone tell me what should be done to boot into installed system? Thanks so much
is this work on Xiaomi Mi Pad 2 16gb variant?
Can I do this for Mi Pad 2 16 GB variant?
Are there any news? With Bliss Rom you can make daily use?
InfinityCore said:
is this work on Xiaomi Mi Pad 2 16gb variant?
Click to expand...
Click to collapse
It should .
After several week research, my current Mi Pad 2 can install Windows 10 (woah!!).
But for this time I need several tools (like USB C OTG Y cable, also USB Hub) to help me installing another OS like Remix or Ubuntu.
By the way anyone succeed install Remix OS 3.0 in mi pad 2 tablet?
there is any bug?
I tried to install in my Mi Pad 2 16gb Phoenix Os, Android x86 and Bliss Os but none boot in live mode. I wait almost 30 minutes for each.
Anyone success installing Another OS to our Mi Pad 2?
I tried to install Ubuntu, it's installed, but I can't boot into it.
Need Help.....
How about remix os?
InfinityCore said:
Anyone success installing Another OS to our Mi Pad 2?
I tried to install Ubuntu, it's installed, but I can't boot into it.
Need Help.....
Click to expand...
Click to collapse
You can boot to installed system by going to Advanced Option in Grub -> Recovery-> Resume boot
Good News! Today I found out that BlissOS 10.0 Oreo 8.1 works on Mi Pad 2!
Bugs are identical to earlier Android versions. But as You can see, Mi Pad 2 HW is capable of running Oreo