Related
Virtual CPU GOVERNOR For all multicore devices Except qualcomm's
DISCLAIMER:- I am not responsiblr for any loss that you or your device may incure by using this mod,and by using this rom you are giving your implied consent to incure any such loss.
RESULT OF THIS MOD:- 7HR STAND BY TAKES 1% BATTERY
For USING THIS MOD KERNEL MUST SUPPORT HOTPLUG GOVERNOR
So guys wait is over now gain cototal control with my new VIRTUAL CPU GOVERNOR
Its revamped and now u can control the core even FOR A" APP"
For eg:- Titanium backup needs very much cpu power so by this mod as soon as you enter in TB Mobile's all 4 cores will b open to serve and when u exit the app ur two core will sleep again....!!!!!
by this MOD u can control the sleep of ur each cor for a app, for a battery state eg :- only one core runs below 40% of battery,it can be used for screen off and on condition eg:- only one core runs in screen off but as screen wakes mobile's 2nd cor gets ready to serve....isnt that nice
SO i Proudly releasing this mod to be used by everyone.
Prerequisite things if you want to edit the settings rovided by me in this mod:-
1. Knoledge of how tasker works;
2.Knowledge of unix shell scripts;
3.Have experince with android.
NOTICE:- noobs only use my given settings dont mess up with the scripts...otherwise you may end with a dead hone which cannot be repaired by sptool even.
FOR EXPERTS:-you may edit according to your needs
Instructions:-
1.buy or get the tasker application.
2. download the zip;
3.Extract it in titanium backup folder of your sd card;
4.Open TBP and search 'tasker' and restore data;
5.start tasker and enjoy the mod.
you can use any cpu app to adjust clockspeed no probs with mod.
By daily usage only 2 cpus has been unlocked if you think that any app may require some more resources then you can include that ap in apps Profile of tasker
Similarly, if you think that any app may require LOT more resources then you can include that ap in HEAVY apps Profile of tasker.
MOREOVER IT IS RECOMMENDED THAT YOU SHOULD HAVE SUPERSU PRO WITH WHICH U HAVE FORCED TASKER AS ROOT USER IT WILL LESSEN THE LATENCY DUE TO ROOT
DOWNLOAD:-
http://www.mediafire.com/?irv55ddsyu5x5qf
Special thanxx to xda Recognized developer @freeza for his post
Thank if this mod helped u.
FAQs
Tasker is saying no profiles active?
Ans.if u can see my pre configured profiles in tasker then jus sleep overnight and at morning observe how much battery is consumed.
How can I check if profiles are working or not?
Ans. Just restore the data of tasker now start tasker and see if you can see my pre configured profiles or not if yes then reboot after boot is complete go to titanium backup and slide down the notification panel and see the tasker's notification.
Which version of tasker should I use?
Ans.i would recommend 4.1u3 as I am using the same
How can I check effectiveness of your mod?
Ans.Just sleep overnight wnd wake up at morning and observe how much BATTERY is consumed
Dont be suspicious guys its genuine effort no troll
Sent from my IQ446 Magic using Tapatalk 2
Hey i just installed CM 11 by Cr3pt on my phone and its really good ROM but i want to ask?
1. What apps can i download to improve phone performace?
2. What are the best cpu setting (governor/IO/MHZ), and what tweaks should i add or i should not add any ?
3. Also i saw this ones http://forum.xda-developers.com/showthread.php?t=2630242 are they good, and if they are how to apply them without making conflict with the ROM ?
4. What apps and services should be stopped and how to do that should i freeze them using ROM Toolbox ?
Thanks.
HI
treantprotector said:
Hey i just installed CM 11 by Cr3pt on my phone and its really good ROM but i want to ask?
1. What apps can i download to improve phone performace?
2. What are the best cpu setting (governor/IO/MHZ), and what tweaks should i add or i should not add any ?
3. Also i saw this ones http://forum.xda-developers.com/showthread.php?t=2630242 are they good, and if they are how to apply them without making conflict with the ROM ?
4. What apps and services should be stopped and how to do that should i freeze them using ROM Toolbox ?
Thanks.
Click to expand...
Click to collapse
1/2
i use autostarts for editing what happens when and if it happens at all (IE when you change network setting or plug phone to pc or install app there is processes triggered by these actions and more. this app allows you to control what runs and what gets forgotten {i disable all widgets that don't use etc})
also cpu tuner allows my gf phone to have multiple "triggers" for cpu IE 100% when screen on and active 80% when screen on but not active and down we go to 30% of cpu power while screen is off again 100% in case you get phonecall or plug in power source (all to be set to your own liking) and i stick with interactive governor but performance might be needed as i dont know what you want to run
IO found THIS thread
3 make full nandroid backup and flash it seems good but considering you on Cr3pt's ROM most of it will be there already so only minor increase in performance if any
4 Q: have you used it in last month or so ? A: no ? So freeze that app (better to stay away from system apps thats for advanced users[i still freeze all live wallpaper related stuff google talk, weather widget etc])
MAKE SURE TO DO FULL NANDROID BACKUP BEFORE USING ROM TOOLBOX(and stay away from boot animations/fonts)
A replacement for SONY's STAMINA MODE. Also a SMARTER GUIDE.
YOU DON'T NEED TO BLOCK WAKELOCKS, USE BATTERY SAVERS, XPOSED, AMPLIFY, etc.
Recommended for:
CM Based ROMS/Custom kernel users/Wifi users.
For those who want high SoT.:angel:
I am not going ask you for a beer or a cup of coffee, only read this guide and thanks me later. [emoji14]
(Recommended) CLEAN FLASH only ROM first, then proceed.
This guide is divided into 2 parts
Moto G 2014 Index of Threads. Thanks @Mister Magister (Easy to search all roms for G 2014).
1. CM based roms.
2. Stock based roms.
KERNELS -
Halogen - Battery/ Balanced/ Performance.
Spirit - Performance.
Optimus - Balanced.
decipher_simple - More battery/Balanced.[I prefer this]
BLOATWARE REMOVAL.
CM Based: Use ES Explorer. Grant SU permission (Root Explorer). Migrate to root.
OR use the Debloat Script. Supports all devices.
In SYSTEM/APP, delete these folders:
Basic Dreams, Browser, CellBroadcastReceiver, CM File Manager, Dash Clock, Eleven, Email, Exchange2, Galaxy4, HoloSpiralWallpaper, LiveWallpapers, LiveWallpaperPicker, NoiseField, PhaseBeam, PhotoPhase, PhotoTable, VisualizationWallpapers, WAPPush/WhisperPush.
Reboot the phone immediately.
BLOATWARE REMOVAL ZIP ADDED: Flash it through TWRP immediatedly after clean flashing the ROM. It will also clear the dalvik.
Now flash Minimal/Pico GAPPS for first time and kernel. (I prefer DECIPHER KERNELL- His own-my.zip recommended)
This kernel is simple one without useless tweaks and hence recommended for more juice saving!
Also flash L SPEED MOD @Paget96. Really working like a charm!! High savings!
YOU CAN UNDERCLOCK WITH L MOD INSTALLED! IT'S TOTALLY LAG FREE!
Stock Based: Rooted
Delete LIVE WALLPAPERS the same way. You can use Juice Defender Ultimate (Don't grant it SU permission).
FOR STOCK, ONE HAS TO USE XPOSED FOR AMPLIFY AND POWERNAP. There are too many wakelocks.
Basic Settings(Common for both)
Settings:
1. Wifi > Advanced - Scanning always available - OFF, Keep wifi on during sleep - Never.
2. Mobile networks: 2G (Wifi users).
3. Display - Sleep - 30 seconds, Daydream - Off.
4. Sound&Notifications - Other sounds - All OFF (your choice).
5. Battery : Turn on bat. saver - NEVER.
6. Location - OFF.
7. Keyboard - Popup, Sound, Vibrate - OFF.
8. Lockscreen -Display Music Visualizer - OFF.
9. Developer Options - Window, Transition animation scale - 0x (or 0.2x) and Animation Duration Scale - 0.2x
These settings should be tuned according to your needs.
If you wish keep AMBIENT DISPLAY to OFF and DOUBLE TAP TO SLEEP on nav bar.
For RESURRECTION ROM or any other cm based rom -
Don't use BATTERY BAR, SLIM RECENTS/ OMNI SWITCH, SLIM PIE, CLEAR ALL BUTTON, SUPERUSER INDICATOR, RR LOGO.
Keep it clean. Default animations.
Now the interesting part, TWEAKS
Recommended Apps - Drive Link below.
1. Kernel Adiutor.
2. SetCPU.
3. Greenify.
4. SDMaid Pro.
Start with
SET CPU;
Install the app, open it, grant SU permission.
Go to PROFILES tab, add a new profile.
My PROFILES BACKUP given in DRIVE LINK. Place it in root of internal storage and restore from SET CPU. {Updated}
Use min freq of kernels flashed! Either 96MHz or 300Mhz.
1. Turn this profile on when - Screen Off.
CPU Governor: On Demand
Min: 96Mhz Max: 600MHz
Priority: 100, EXCLUSIVE
2. Add a new profile - Battery Saver.
Turn profile on when - Battery 5%
CPU Governor: zzmove
Min: 96MHz Max: 787MHz
Notificaton: Persistent, Battery.
Priority: 99, EXCLUSIVE.
3. Again a new profile
Turn profile on when - Any of these are true. ( in it, add your CAMERA apps)
CPU Governor: Interactive.
Min: 96MHz Max: 1190MHz
Priority: 97, EXCLUSIVE.
4. New one
Turn profile on when - Screen ON.
CPU Govenor: zzmove (2).
Min: 96MHz Max: 1190MHz
Priority: 96, NOT EXCLUSIVE.
Below this priority you can add per app profiles as per your wish.
GRANT SU permission to SET PROFILES (UID)
KERNEL ADIUTOR
Settings for HALOGEN KERNEL, DECIPHER_SIMPLE (Do this after setting up SET CPU)
Open app,
CPU -
Min: 96MHz Max: 1190MHz
CPU Governor: Don't change. It will be as per SET CPU.
Multicore Power Saving: Enabled (Not Aggressive).
CPU Boost -Interval (Both) to 40ms.
Input Boost Freq: 787MHz
CPU Hotplug
Intelliplug -OFF.
MSMHotplug -OFF.
Alucard Hotplug -ON.
You can use INTELLIPLUG Balanced/ Eco Conservative/ Strict(1 core) Halogen too.
GPU
Max: 320MHz (if you are not a gamer or else 450)
Governor: Simple_OnDemand. (Gaming - Performance or msm-adreno_tz)
Save this profile. Allow the phone to rest for 15 mins.
Change the governor to IMPULSE and save another profile for performance. Use widget for applying.
Note - CPU Governors in SET CPU and Kernel Adiutor should match. Don't change the CPU Governor from Kernel Adiutor. Do it from Set CPU Profiles. Also you need to apply the profile after reboot.
GREENIFY - Root Mode.
Add all apps except Set Cpu, Kernel adiutor.
.
Don't use Xposed. It runs everytime you start module app., after all you are using custom rom.
Google Backup off, and all tracking services of GOOGLE PLAY SERVICES should be off.[emoji14]
No wakelock blocks. Auto Sync OFF after syncing - This does more saving.
With above tricks, I have achieved 0% percent drain. ( At night too.), 6hrs SoT :fingers-crossed:
If your phone reboots on unlocking, it means you have something wrong. Then change Set CPU SCREEN OFF profile governor to zzmove.
Code:
[U]CPU Governor Tunables[/U]-
* currently available profiles by ZaneZam and Yank555:
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (1)'def' -> Default -> will set governor defaults -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (2)'ybat -> Yank Battery -> a very good battery/performance balanced setting -
* - DEV-NOTE: highly recommended! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (3)'ybatext'-> Yank Battery Extreme -> like yank battery but focus on battery saving -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (4)'zzbat' -> ZaneZam Battery -> a more 'harsh' setting strictly focused on battery saving -
* - DEV-NOTE: might give some lags! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (5)'zzbatp' -> ZaneZam Battery Plus -> NEW! reworked 'faster' battery setting -
* - DEV-NOTE: recommended too!:) -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (6)'zzopt' -> ZaneZam Optimized -> balanced setting with no focus in any direction -
* - DEV-NOTE: relict from back in the days, even though some people still like it! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (7)'zzmod' -> ZaneZam Moderate -> NEW! setting based on 'zzopt' which has mainly (but not strictly only!) 2 cores online -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (8)'zzperf' -> ZaneZam Performance -> all you can get from zzmoove in terms of performance but still has the fast -
* - down scaling/hotplugging behaving -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (9)'zzinz' -> ZaneZam InZane -> NEW! based on performance with new insane scaling active. a new experience! -
* ------------------------------------------------------------------------------------------------------------------------------------------
* - (10)'zzgame' -> ZaneZam Gaming -> NEW! based on performance with scaling block enabled to avoid cpu overheating during gameplay -
* ------------------------------------------------------------------------------------------------------------------------------------------
* profile_number 0 means that you can tune the tunables according to your own liking. ;)
Thanks to zakee94. :good:
SDMaid Pro
Check all boxes in Corpse finder settings, and scan and remove all corpse. ( LEFTOVER Dalvik of removed bloatware).
For Stock Based roms/ Stock rooted: Use STELLAR Kernel
zzmove is preconfigured in all kernels above.
If you face lag using zzmove post in here.
RECOMMENDED APPS:
These are best apps
MUSIC PLAYER - Phonograph.
CAMERA - Open Camera. (Better than CM Camera)
NOTE MAKING - Google KEEP.
FILE EXPLORER - ES Explorer.
INSTALLER- Easy Installer.
CLOCK- Timely.
CALENDAR - Sunrise.
Disable this apps: Clock, Google App, Google Calendar Sync, Google Partner Setup, Market Feedback Agent, OTA (if you wish), PICO tts, Print Spooler.
Force Stop this apps at night: Calendar , Calendar Storage, Google Contacts Sync, Google Play Store, Key Chain, Location Services, Themes Provider. (For 0% drain also switch to FLIGHT MODE at night)
Use PICO GAPPS.
No BETTER BATTERY STATS, WAKELOCK DETECTOR, AMPLIFY, and BATTERY SAVERS.
Power Cycle - Charge from 5% to 100% and 10 min more to 100. Give up using phone while charging.
Thanks to all Devs for their support to G 2014. @zakee94 @-decipher-
Next time if anyone says that G 2014 has got 2070mAh battery only. Just reply them that " Since Motorola is grandtechy company they have certain quotas to maintain device ergonomics, so there's odd numbered 2070mAh battery!"
Any SUGGESTIONS will be appreciated. Hit thanks.
Thanks @Azmat Roomi for suggestion of L Speed Mod.
Link to DRIVE.
For OTHERS PHONES you can use the profiling and settings, set cpu.
HIT THANKS and ANSWER THE POLL if YOU have LIKED the THREAD!
Latest screenshot - 8hrs SoT:highfive:
ROM: cm-12.1-20151102-NIGHTLY-titan.zip
KERNEL: Decipher's Drive - [151101]my.zip
No Battery Savers, Xposed, Wakelock Blocker, L Speed Mod etc.
Only GREENIFIED some GCM apps, not all apps. This works. You shouldn't FORCE STOP apps unless they aren't responding. Reloading them takes more battery and memory. Only force stop apps with GCM and the ones you don't use.
Drain was 0% - Since it was 3%, the CPU governor was POWERSAVE. It may be 2-3% at night.
Attached- New SET CPU profiles backup - In the Drive.
Code:
[B]Kernel Adiutor Settings[/B]:
[B]CPU[/B] :
Min - 300MHz.
Max - 1190MHz.
[B]CPU Hotplug[/B] :
MPDecision - Max Cores - 2.
[B]GPU[/B] :
Max - 200MHz.
Governor - simple_ondemand.
[B]Virtual Memory[/B] :
dirty ratio - 70 .
dirty background ratio - 9.
dirty expire centisecs - 350.
dirty writeback centisecs - 500.
min free kbytes - 2857.
over commit ratio - 50.
swapiness - 90.
vfs cache pressure - 130.
[B]TCP Congestion Algorithm[/B] : westwood.
I don't know about the settings. I tried certain combinations and got good results.
Default zzmove profile was 8 - zzperf.
All other settings were at default.
DISABLE PER-APP PROFILES in BATTERY SETTINGS. Recommended.
Minimize HEAVY APPS before screen goes off - If you face lag while unlocking the phone with set cpu profiles screen-off active.
Nice guide and awesome battery life. Thank's for sharing.
-decipher- said:
Nice guide and awesome battery life. Thank's for sharing.
Click to expand...
Click to collapse
Very Nice Guide.I normally use to get 3-4hrs SOT.But after following this guide i am now easily getting 5-6hrs SOT.Guys give it a try it works like charm.
Azmat Roomi said:
Very Nice Guide.I normally use to get 3-4hrs SOT.But after following this guide i am now easily getting 5-6hrs SOT.Guys give it a try it works like charm.
Click to expand...
Click to collapse
Thanks for the review.:highfive:
@Abhishek Bhagwat Alucard seems to keep only one core active the whole time. What do you think about using MSM Hotplug instead?
Also ZZMOVE is a little bit sluggish for me, do you recommend any other governor for screen on?
godoy.rafa said:
@Abhishek Bhagwat Alucard seems to keep only one core active the whole time. What do you think about using MSM Hotplug instead?
Click to expand...
Click to collapse
One core is economy.
Also it delivers smooth performance with zzmove if you have followed the guide as above.
You can try INTELLIPLUG with STRICT profile since it uses 1 core.
Abhishek Bhagwat said:
One core is enough. Smooth performance on zzmove profile 2.
MSM Hotplug in Halogen R7 plugs 4 cores . Could be a bug. So I use Alucard!
Click to expand...
Click to collapse
This is what happens in my device:
Hotplugs:
- Intelliplug plugs only 2 cores, not more os less than that, so I don't use it
- Alucard only plugs one core, and it makes apps like Facebook to become very slow
- MSM Hotplug plugs 1, 2, 3 or 4 cores depending on my usage, and it seems to be the best hotplug in my case
Governor
- ZZMOVE gives my device a very slow response, seems like I am using a much older device, and apps become slow as well
- INTERACTIVE might use more CPU, but makes the device very smooth, fast and responsive. I understand that it might use more battery
@godoy.rafa
The above GUIDE is to give smoothest performance while using ZZMOVE.
In my device -
- Intelliplug plugs
1 Core - Strict , 2 Cores - Eco Conservative/Eco Performance, 3 Cores - Tri, 4Cores - Balanced.
-MSM Hotplug
Variable plugs, mostly 2,3,4 cores.
-Alucard
1 Core.
Try IMPULSE instead of zzmove or interactive. But I won't guarantee BATTERY SAVINGS on it.
Two questions: how do I disable Google backup and Google Play Services' tracking stuff services?
Also, I plan to install Resurrection Remix. The animations which should be kept as default are the ones you change at developer settings?
One question, after clean install ~ we woudn't have the es file explorer without play store right?Then how is it possible to delete those things then flash gapps?
theserpent said:
One question, after clean install ~ we woudn't have the es file explorer without play store right?Then how is it possible to delete those things then flash gapps?
Click to expand...
Click to collapse
Take the backup of es file explorer apk to your sd card.After flashing cm based rom you will get cm file manager just install es file explorer through it and remove bloatware:good:
josfr4ncisco said:
Two questions: how do I disable Google backup and Google Play Services' tracking stuff services?
Also, I plan to install Resurrection Remix. The animations which should be kept as default are the ones you change at developer settings?
Click to expand...
Click to collapse
1. Pause all ACTIVITIES in Google Play Services App.
Ex. Web History, Youtube History, etc.
2. Settings/Backup and Restore - Untick Backup.
Note: This will delete all the backups except that of CONTACTS, KEEP, etc.
3. All animations should be default at DURATION SCALE of 0.2x.
theserpent said:
One question, after clean install ~ we woudn't have the es file explorer without play store right?Then how is it possible to delete those things then flash gapps?
Click to expand...
Click to collapse
Right answer by @azmat!
Awesome guide bro
Cheers
Thanks for the review!
Did it work for you? @Vatsal
Abhishek Bhagwat said:
Thanks for the review!
Did it work for you? @Vatsal
Click to expand...
Click to collapse
Yes bro it did quiet a lot
Why is this thread closed? It was a
Nice guide...
ishubhamsingh said:
Why is this thread closed? It was a
Nice guide...
Click to expand...
Click to collapse
No feedbacks [emoji28]
Abhishek Bhagwat said:
No feedbacks [emoji28]
Click to expand...
Click to collapse
Dont expect feedbacks on huge basis. But ppl do follow this guide.
Guys share ur feedback on regular basis in order to keep thread alive and people wil have solutions for problems in their battery life
Sent from my Moto G 2014 using XDA Free mobile app
Hi! I decied to open this thread to clear the waters for people who want to switch to MIUI 9.
Coming from Global stable rom, you just need to flash global beta by downloading .zip file from official miui site, just go to updater app on your phone and choose .zip you downloaded and flash it. You will loose your data.
Now, whats new to miui 9: Apps do open a bit faster, and combined with new animations system feels smoother. Ram usage is same as on Miui8, battery life is 1h SOT per 10% with moderate to heavy usage. Camera has slowmotion ability, and split screen works just fine, some apps dont support dual screen like instagram and they crash.
Overall its stable enough to be used as daily driver.
Yes, it is stable. But Sync isn't properly working on my device. Also Did You checked the Real Time Battery stat while Charging. I always Get 4.1/3.9 V Instead of 5 V Supported By Charger. Can You Please Check that!
is miui 9 music player support (.m4a) audio format ?
Hello folks.
I will soon have an S5 in my possession. I've never owned a Samsung phone before, so my first question is - should I stick w/ the stock ROM (I understand the most recent version for this phone is 6.0.1), or should I install a custom? Are there any serious drawbacks with the stock ROM (bloatware, etc)? What improvements would I see with a custom ROM?
Thanks.
mrfeh said:
Hello folks.
I will soon have an S5 in my possession. I've never owned a Samsung phone before, so my first question is - should I stick w/ the stock ROM (I understand the most recent version for this phone is 6.0.1), or should I install a custom? Are there any serious drawbacks with the stock ROM (bloatware, etc)? What improvements would I see with a custom ROM?
Thanks.
Click to expand...
Click to collapse
Hi,
it really depends of what are you looking for. If you want to get the latest features and updates, go Custom.
if you only use your phone to make calls, take nice photos, Games, etc. Stay in Original, although, you have some Debloated 6.0.1 ROMs that do the work just fine.
Cheers,
My S5 is the Sprint (G900P, Snapdragon) variety. Is there a default/easiest root method? Is there a preferred recovery to use?
Thanks.
Way to go is custom ROM, and that mostly due to bloatware.
ROM, root, recovery are personal choices dependent of your wishes/needs.
And S5 is rich with choices. For some reason, I was/am happy with stock ROM.
So I see a lot of reading in your future...
I am owning the GS5 for 1.5 year or so, and I can't remember how many times I have returned back to stock after 2-3 days of custom. I don't know why, I am just a random user who is using phone for social media and calls. Rarely playing any games but any ROM I tried it had some problems which I couldn't keep.
Performance and feature --> go with custom ROM. Have a good adventure..!
Stability and battery life --> always.. stock ROM
---------- Post added at 09:36 AM ---------- Previous post was at 09:32 AM ----------
mrfeh said:
My S5 is the Sprint (G900P, Snapdragon) variety. Is there a default/easiest root method? Is there a preferred recovery to use?
Thanks.
Click to expand...
Click to collapse
Easiest with Magisk. TWRP recovery recommended.
ive got the tmobile version and love the thing. im on lineage 14.1 and its stable as crap. can use the sd card as adptive storage and that opens alot of room up.
Most important question: how is camera quality with custom ROM?
kurtn said:
Most important question: how is camera quality with custom ROM?
Click to expand...
Click to collapse
My camera glass is broke so it sucks. Lol
kurtn said:
Most important question: how is camera quality with custom ROM?
Click to expand...
Click to collapse
with good light they are both good with less light stock is better
If you want the latest features from the new S9, go to NOISE ROM v3. This ROM is amazing !
Envoyé de mon SM-G955F en utilisant Tapatalk
what is the best stock rom for battery life and performance?
lollazzo said:
what is the best stock rom for battery life and performance?
Click to expand...
Click to collapse
Best stock..? Stock is stock lol. Anyway, I'm using Boeffla Kernel on stock ROM and did the following things to get better battery life without actually compromising my phone:
1. In Boeffla Config under CPU I set the maximum clock speed to 1728 MHz, selected "Optimized" as Hotplug profile, selected "Aggressive" as Multicore powersave and selected "undervolt -75mV" as UV Profile.
2. In Boeffla Config under GPU I set the minimum clock speed to 27 MHz.
3. I've bought and installed Amplify (needs Xposed to work) and have limited the following wakelocks all to 600 seconds:
- GCoreFlp
- *net_scheduker*
- Wakeful StateMachine: GeofencerStateMachine
- LocationManagerService
- SyncLoopWakeLock
- Icing
- NfcService:mRoutingWakeLock
- NlpWakeLock
- NetworkStats
- StartingAlertService
- GpsLocationProvider
- AudioIn
- NlpCollectorWakeLock
**Under 'Alarms' I've limited the following alarm: com.android.internal.telephony.data-stall again to 600 seconds.
4. I've bought and installed Greenify and have the following apps set to automatically hibernate on screen-off:
- Blackmart
- Instagram
- Facebook Lite
- Peel Remote
- Spotify
- Video Player (stock one)
- Notes (stock one)
**The selected mode is 'Root + Boost (Xposed)', 'Automatic hibernation' is ticked, 'Extras for Geek' is also ticked, everything under 'Xposed based options' is also ticked and 'Wake-up Tracking and Cut-off' is also allowed.
5. Other than that I have Auto-Sync off unless phone is charging (using Tasker for this), WiFi at home, Bluetooth on only when I need it, GPS on power saving unless I need it on high accuracy (again, Tasker), no power saving mode activated, mobile data is set to 2G/3G mode (no 4G as I don't need it anyway, YouTube is fine on 3G so it's enough for me), Screen Rotation is on, Smart Stay is on, Multi Window is on, Increased sensitivity is on. I also have my 5 most used apps always open in RAM (Telegram, Whatsapp, Poweramp, Gallery-not stock one, Facebook Messenger Lite).
I'm still testing but the phone feels significantly cooler than before and I think battery life is actually noticably better than before, yet the phone works as it should (I don't play games or run super heavy apps).
koragg97 said:
Best stock..? Stock is stock lol. Anyway, I'm using Boeffla Kernel on stock ROM and did the following things to get better battery life without actually compromising my phone:
1. In Boeffla Config under CPU I set the maximum clock speed to 1728 MHz, selected "Optimized" as Hotplug profile, selected "Aggressive" as Multicore powersave and selected "undervolt -75mV" as UV Profile.
2. In Boeffla Config under GPU I set the minimum clock speed to 27 MHz.
3. I've bought and installed Amplify (needs Xposed to work) and have limited the following wakelocks all to 600 seconds:
- GCoreFlp
- *net_scheduker*
- Wakeful StateMachine: GeofencerStateMachine
- LocationManagerService
- SyncLoopWakeLock
- Icing
- NfcService:mRoutingWakeLock
- NlpWakeLock
- NetworkStats
- StartingAlertService
- GpsLocationProvider
- AudioIn
- NlpCollectorWakeLock
**Under 'Alarms' I've limited the following alarm: com.android.internal.telephony.data-stall again to 600 seconds.
4. I've bought and installed Greenify and have the following apps set to automatically hibernate on screen-off:
- Blackmart
- Instagram
- Facebook Lite
- Peel Remote
- Spotify
- Video Player (stock one)
- Notes (stock one)
**The selected mode is 'Root + Boost (Xposed)', 'Automatic hibernation' is ticked, 'Extras for Geek' is also ticked, everything under 'Xposed based options' is also ticked and 'Wake-up Tracking and Cut-off' is also allowed.
5. Other than that I have Auto-Sync off unless phone is charging (using Tasker for this), WiFi at home, Bluetooth on only when I need it, GPS on power saving unless I need it on high accuracy (again, Tasker), no power saving mode activated, mobile data is set to 2G/3G mode (no 4G as I don't need it anyway, YouTube is fine on 3G so it's enough for me), Screen Rotation is on, Smart Stay is on, Multi Window is on, Increased sensitivity is on. I also have my 5 most used apps always open in RAM (Telegram, Whatsapp, Poweramp, Gallery-not stock one, Facebook Messenger Lite).
I'm still testing but the phone feels significantly cooler than before and I think battery life is actually noticably better than before, yet the phone works as it should (I don't play games or run super heavy apps).
Click to expand...
Click to collapse
sorry I suppose stock rom=touchwiz rom like Nemesis.
lollazzo said:
sorry I suppose stock rom=touchwiz rom like Nemesis.
Click to expand...
Click to collapse
Nemesis is not stock, it's a hugely customized one ;d stock ROM is the one which came with the S5.
TW modded rom is better than the custom rom like lineage for battery life and camera, isn't?
Touchwiz stock..root and debloat..simples
russy23 said:
Touchwiz stock..root and debloat..simples
Click to expand...
Click to collapse
I don't like stock, I prefer tw custom.
russy23 said:
Touchwiz stock..root and debloat..simples
Click to expand...
Click to collapse
My friend I followed your advice.
Now my phone run stock rom debloated.
What is the best kernel for battery and performance (I don't play games).?
lollazzo said:
My friend I followed your advice.
Now my phone run stock rom debloated.
What is the best kernel for battery and performance (I don't play games).?
Click to expand...
Click to collapse
I use boeffla kernel..no issues