I had HavocOS working before with Magisk on my phone, but TWRP was locked from mounting the internal storage because of some forced encryption android does. To stop the forced encryption, I installed ForceDisableEncryption-Treble Initially I found it in a Pocophone F1 Video but Treble seemed to be for Android in general in my phone, and flashed PixelExperience at the same time too (with following the same wipe method: Dalvik / Art Cache; System; Data; Cache) because HavocOS was being unstable for me, and since then it has been always rebooting into recovery and not the actual ROM itself. I even tried HavocOS again, and still it did not work. So I looked around the forums to seek a fix and I found this: https://forum.xda-developers.com/showthread.php?t=2451696
I wrote the command "dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota" on my phone since I did not have an available computer at the time, and It weirdly stated that the directory did not exist.
EDIT: I also reflashed TWRP and just tried flashing again, same results making me panic, but I don't think the phone is dead since it still reboots to recovery.
I do not know what to do now.
Noiseredux said:
... I do not know what to do now.
Click to expand...
Click to collapse
Format the data partition.
DarthJabba9 said:
Format the data partition.
Click to expand...
Click to collapse
Still nothing. I think I corrupted the file system by changing it to EXT2 then back to EXT 4 to remove the encryption
I did that before the treble though, and my phone still booted up to the ROM, but it still encrypted itself, so I used the ForceDecryption and it's only been booting to recovery since.
Noiseredux said:
Still nothing. I think I corrupted the file system by changing it to EXT2 then back to EXT 4 to remove the encryption
I did that before the treble though, and my phone still booted up to the ROM, but it still encrypted itself, so I used the ForceDecryption and it's only been booting to recovery since.
Click to expand...
Click to collapse
Well, you might have to flash a fastboot MIUI ROM with the Mi Flash tool. Just make sure you don't accidentally lock your bootloader again.
DarthJabba9 said:
Well, you might have to flash a fastboot MIUI ROM with the Mi Flash tool. Just make sure you don't accidentally lock your bootloader again.
Click to expand...
Click to collapse
Good news! I got into MIUI 10 by the Mi Flash tool. I chose "clean all" in the software, so I think it erased everything. One problem occurred though, the MiTool was still continuing to show "Flashing" and not "success", even after booting up and everything. I closed it, hopefully it doesn't break things.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Should I try to install TWRP and PixelExperience now again?
Noiseredux said:
Good news! I got into MIUI 10 by the Mi Flash tool. I chose "clean all" in the software, so I think it erased everything. One problem occurred though, the MiTool was still continuing to show "Flashing" and not "success", even after booting up and everything. I closed it, hopefully it doesn't break things.
Should I try to install TWRP and PixelExperience now again?
Click to expand...
Click to collapse
I am also stuck on same issue with my poco F1, and I even tried flashing fastboot rom but it did not boot into system.
Related
I need help I have 2 phone both have same problem after reset stuck on logo
I tried on stock image 4.4.4 .. 5.0 .. 5.0.1 but same condition.
I need solution thanks in advance
I have a similar issue. My phone wont boot beyond the nexus animation screen. I have searched XDA and tried everything. It seems to be a hardware issue. If you can get your bootloader unlocked using the Nexus Root Toolkit, you have a hope. Mine doesn't even unlock. Hope it helps.
(
I could not fix my Nexus 4 was the same problem
If you are 100% Stock and Locked bootloader, you could try booting to stock recovery.
Then perform wipe data/Factory reset and reboot system. It might help. Warning factory reset WILL delete all your user apps, settings and user data, pictures. music.... etc
If not, unlock bootloader, try re flashing factory images from fastboot and wipe data/factory reset before booting into android.
imeicodes said:
I need help I have 2 phone both have same problem after reset stuck on logo
I tried on stock image 4.4.4 .. 5.0 .. 5.0.1 but same condition.
I need solution thanks in advance
Click to expand...
Click to collapse
priyamjani said:
I have a similar issue. My phone wont boot beyond the nexus animation screen. I have searched XDA and tried everything. It seems to be a hardware issue. If you can get your bootloader unlocked using the Nexus Root Toolkit, you have a hope. Mine doesn't even unlock. Hope it helps.
Click to expand...
Click to collapse
Try Nexus Toolkit.
I try factory image on unlocked bootloader and toolkit too but result same stuck on logo not solve I think it is hardware problem any one give me solution how repair phone on hardware
imeicodes said:
I try factory image on unlocked bootloader and toolkit too but result same not solve I think it is hardware problem any one give me solution how repair phone on hardware
Click to expand...
Click to collapse
Did you install a custom recovery after unlocking?
Any error messages when you wipe the cache in stock or custom recovery?
Any error messages when you were flashing the ROM?
---------- Post added at 01:01 AM ---------- Previous post was at 12:56 AM ----------
Did you try the "Soft- Bricked/Bootloop" option in Wug's Nexus Root Toolkit ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
joegestes said:
Did you install a custom recovery after unlocking?
Any error messages when you wipe the cache in stock or custom recovery?
Any error messages when you were flashing the ROM?
---------- Post added at 01:01 AM ---------- Previous post was at 12:56 AM ----------
Did you try the "Soft- Bricked/Bootloop" option in Wug's Nexus Root Toolkit ?
Click to expand...
Click to collapse
thanks for reply
i tried that after flash phone full powered up and working fine
when i factory reset phone back in same condition boot loop i need permanently solution
how fix that problem ??
imeicodes said:
thanks for reply
i tried that after flash phone full powered up and working fine
when i factory reset phone back in same condition boot loop i need permanently solution
how fix that problem ??
Click to expand...
Click to collapse
What ROM are you using while experiencing this problem?
How did you perform the factory reset ?
-stock recovery
-custom recovery(which one)
or
-In android settings
-reset In android setting
and i have stock recovery installed and right now i using 4.4.4 stock image
imeicodes said:
-reset In android setting
and i have stock recovery installed and right now i using 4.4.4 stock image
Click to expand...
Click to collapse
Not sure it will help, but I'd do a factory reset in your stock recovery and see if you get any cache errors.
So, in short:
I wanted to try the stock ROM on my Oneplus 5 now that it got an update to Oreo. I was going from Lineageos 14.1 to OOS 5.0.1.
Tried to flash it using TWRP, didn't work. . Found out I had to use an updated TWRP specifically for Oreo. Did that, got Codeworkx's TWRP and flashed it, and then the stock ROM. Stock ROM got stuck in loading screen for 20+ minutes. After that, everything was encrypted when I looked in TWRP. So I wiped everything. Also tried using the stock recovery. No dice, couldn't even install anything from internal storage. After trying a few things I wanted to go back to LineageOS 14.1 (same build as I had before), but now that one's stuck in loading screen as well for over 20 minutes.
Here are the things I've tried:
Using different recoveries, from Codeworkx's TWRP to Blu_spark's to the original TWRP. The Original TWRP recovery does not work anymore. Gives errors when trying to do things like wipe. Installing ROMs gives errors as well.
Tried installing just the ROM, and the rom + Magisk and the rom + magisk + open gapps. Always stuck on loading screen.
I'm trying to flash the latest ROM for Oneplus 5.
I'm trying to push more stuff onto the phone using adb, but right now I'm getting the "error: closed" error message.
The only thing I can try are flashing stock rom, then stock recovery and tehn locking the bootloader, but the latter will erase everything from the internal memory, and if I can't adb sideload stuff anymore, I'm not sure what I can do with the phone...
Edit: Another weird thing I noticed:
After it's been loading for 20+ minutes, the phone shows it's at 0% charge, then when I enter recovery, it's back to 100%. The phone is connected to my computer the whole time.
Edit 2: I tried to flash an android 7.1.1 version of OOS (OOS4) to my phone, this went fine. Booted up the phone, got an "encryption unsuccesful" error. On next boot, recovery is back to stock instead of TWRP. Flashing TWRP and then doing a factory reset has no effect.
These are the errors I see when I use the normal TWRP recovery (so not codeworkx's or blu_sparks' version:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are updating the OP5 from Nougat to Oreo and you are encrypted you need to format the data on your phone. You can do it with TWRP (the option is part of the wipe tab). That will erase everything on your phone except TWRP. If you plug your phone into a computer it will act like an external hard drive and you can simply copy and paste the ROM zip onto your phone and then flash it with TWRP.
If you are decrypted you need to flash the no verity zip for OOS to boot up.
Thanks for the reply. I managed to get lineageos 15 running on the phone without problems. Not totally satisfied with it, so if/when I flash back to LineageOs 14.1 I'll keep this in mind. Thanks!
asus zenfone 2 laser ze550kl with 2 GB ram and 32 internal - i bought it as snapdragon 410 checked device info apps it said it's eight cores and MSM8939 615 confused
Bootloader unlocked
Got TWRP *tried twrp-3.0.2-0-Z00L and twrp-3.2.1-0-Z00L
lineage os *tried lineage-14.1-20180311 and lineage-14.1-20180318
installed successfully
infinity reboots never loads into the system, sometimes it gets to lineage os animations boot and then reboots again
any ideas
Do factory reset and then reboot
deepakt6699 said:
Do factory reset and then reboot
Click to expand...
Click to collapse
The phone never passed lineageos boot animations, I switched back to the stock rom
update
tried
AospExtended-v5.3-Z00L-20180311-0437-OFFICIAL
lineage-15.1-20171209_174211-UNOFFICIAL-Z00L
RR-N-v5.8.5-20171130-Z00L-FINAL
they are all passing twrp installing - again infinty restarts never passed rom boot animations
Format data in TWRP and retry.
okmikel said:
Format data in TWRP and retry.
Click to expand...
Click to collapse
didn't work tried a lot of times with the roms i mentioned nothing work
all keep rebooting never pass animations
maybe my device os not z00l i don't know
here's SCR of cpu-z
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
up
up
reload the current twrp
make sure you wipe/format everything
try octos n m2 (this is my go to when i want an everyday rom)
try loading the rom without any gapps packages (gapps may be the problem)
i have a z00t, not z00l but that shouldn't matter.
beenkenobee said:
reload the current twrp
make sure you wipe/format everything
try octos n m2 (this is my go to when i want an everyday rom)
try loading the rom without any gapps packages (gapps may be the problem)
i have a z00t, not z00l but that shouldn't matter.
Click to expand...
Click to collapse
thanks man <3 , downloading and will try btw every rom i tried was without gapps and everything was wipe and used two diff twrp versions ... that's wat made me so confused because all comments saying works perfectly
beenkenobee said:
reload the current twrp
make sure you wipe/format everything
try octos n m2 (this is my go to when i want an everyday rom)
try loading the rom without any gapps packages (gapps may be the problem)
i have a z00t, not z00l but that shouldn't matter.
Click to expand...
Click to collapse
the same issue asus logo and sometimes it gets to the rom logo then it keeps restarting
Steps i followed :
Wipe system, data, cache, dalvik Art
Flashed treble twrp recovery(link was given in changelogs of ROM)
Flashed Nitrogen OS latest build
Flashed gapps mini
Tried to boot up but stucked on scattered screen
(Tried clean flash many times but no luck)
Please help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
helloabcde said:
Steps i followed :
Wipe system, data, cache, dalvik Art
Flashed treble twrp recovery(link was given in changelogs of ROM)
Flashed Nitrogen OS latest build
Flashed gapps mini
Tried to boot up but stucked on scattered screen
(Tried clean flash many times but no luck)
Please help
Click to expand...
Click to collapse
Are You Flashed Latest Treble Build ?
Azzkaran said:
Are You Flashed Latest Treble Build ?
Click to expand...
Click to collapse
IF you mean latest treble build of Nitrogen OS?
YES I Flashed latest one. (it's 2018-05-08 build)
Things You Need Before Flashing Treble ROM..
Download Treble Supported ROM..
Download Latest Firmware For Your Device..
First Of All Flash Any Treble Supported Recovery
Then reboot to recovery
Go to wipe -> advanced wipe -> select system,data,dalvik-cache, cache and vendor if vendor option not showing in recovery then enable it in recovery settings..
Then follow this steps...
After wiping install your firmware..
Then Flash Your ROM...
After That Flash Your Gapps Reboot..
If Phone Stuck At Boot Then Try Rebooting Again..
I Hope This Guide Will Help You..
Azzkaran said:
Things You Need Before Flashing Treble ROM..
Download Treble Supported ROM..
Download Latest Firmware For Your Device..
First Of All Flash Any Treble Supported Recovery
Then reboot to recovery
Go to wipe -> advanced wipe -> select system,data,dalvik-cache, cache and vendor if vendor option not showing in recovery then enable it in recovery settings..
Then follow this steps...
After wiping install your firmware..
Then Flash Your ROM...
After That Flash Your Gapps Reboot..
If Phone Stuck At Boot Then Try Rebooting Again..
I Hope This Guide Will Help You..
Click to expand...
Click to collapse
From installing firmware do you mean latest miui rom for redmi 3s
And if yes, don't i need to wipe data and other things before flashing my rom
helloabcde said:
From installing firmware do you mean latest miui rom for redmi 3s
And if yes, don't i need to wipe data and other things before flashing my rom
Click to expand...
Click to collapse
https://forum.xda-developers.com/xiaomi-redmi-3s/development/firmware-xiaomi-redmi-3s-t3760880
Download Latest Firmware From This Link And Flash It After Cleaning Vender,Data,Dalvik-cache,Cache,System.
Then Flash ROM And Gapps
Build type: crDroid Unofficial Treble ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
!!! Whatever you do, it is at your own risk !!!
I am not responsible for unreported Bugs.
*************************************************************************************************************
Introduction:
This is the unofficial crDroid thread for the YU Yureka Black, codename garlic.
This should work on all Tinno p7201 clones as well.
Status: Enforcing unsigned userdebug build.
Working: Bluetooth, Calls, Bearer services, Wifi, Poweroffalarm, Dt2w, GPS, Elan fp, FD Encryption.
How to install:
Finish setting up treble.
Boot the newest TWRP .img from the Official TWRP Project Site.
Flash ROM, flash GApps (Optional)
Reboot
Download:
Rom-Builddatesha256sumNot working maybeChangescrDroidAndroid-11.0-20220323-garlic-v7.16703229f1a64a8d098d18914084a9ab3eee49ca62bb26cf862dc898e54296a2e4Googlecast and Volte not working
Kernel Source : Click Here
Device Tree : Click Here
Common Tree : Click Here
Special Thanks to
crDroid team
Information
crDroid 7.16 for YU Yureka Black, ROM for the Yu Yureka Black
Contributors
@pbteja
Source Code: https://github.com/crdroidandroid
ROM OS Version: Android 11
ROM Firmware Required: N firmware
Based On: crDroid
Version Information
Status: Stable
Created 2022-03-24
Last Updated 2022-03-24
Thanks for effort.
Previously I was on StagOS 11 R3, Andoid-N firmware.
Did wipe of everything including data partition.
Reboot after installation goes back to recovery.
dmesg log attached.
Any idea what did I miss?
İnstall crdoid zip and wipe system vendor cache data and format data reboot recovery flash crdoid zip
kozlu14 said:
İnstall crdoid zip and wipe system vendor cache data and format data reboot recovery flash crdoid zip
Click to expand...
Click to collapse
Tried clean flash with new and old recovery.
Also tried dirty flash on StagOS 11.R3, still doesn't work.
With old TWRP and PBRP, after patching vendor image phone gets into hung state with sold light for few sends and then probing lights for few seconds alternately.
With latest TWRP, no errors but reboots into recovery after few seconds.
Fortunately StagOS 11.R3 still gets installed fine, battery life is poor though.
Anything to be done specifically to get crDroid working?
I tried undo-redo treble conversion, still same behavior.
İnstall los18.1 qfil image and boot TWRP format data and wipe cache system vendor and try install crdoid rom
With last attemp device didn't came out of EDL mode with notification light staying red, I had to let device run of battery.
For pleasant surprise, device booted to crDroid and is up till now without glitches.
Is there way to upgrade this to crDroid 9? I'll like to give it a try.
@pbteja you still have sources? Any newbie guide to build and troubleshoot will help.