DISCLAIMER:This is only a compilation of various links of sources at one place and entire credit goes to the authors and developers of the original posts.
My requirement was:
1. Best Battery
2. Clear Network and call quality.
3. Smooth Operation
4. Clear DSP for headphones and speaker
5. Best Camera MOD.
After thorough try and testing, I have landed with following combinations. NO ROOT REQUIRED.
1. Recovery - TWRP 3.1.1.0
https://twrp.me/devices/xiaomiredminote3.html
2. Rom:
Latest Developer ROM for updated features. I used 7.5.23.
3. Firmware:
Firmware for Global Stable 8.2.3.0. I found this to be best so far.
https://forum.xda-developers.com/redmi-note-3/development/firmware-hmnote3proglobal-t3574361
4. Camera MOD:
Followed steps in these llink. Note to run lazyflasher process detailed in the thread.
http://en.miui.com/thread-310923-1-1.html
Download Lazyflasher from:
https://www.androidfilehost.com/?fid=529152257862700328
First Install TWRP, then run the lazyflasher, then the camera mod based on the rom version you are on and then reboot.
http://en.miui.com/thread-472731-1-1.html
5. Camera2 API:
Enabled Camera2 api and started getting RAW capture enabled, in snapcamera app installed from Google Playstore.
Followed the NON-ROOT mode of installing from be below link
http://en.miui.com/thread-415050-1-1.html
After doing all above, I have got what I wanted from my Budget Beast RN3.
Hope this would be helpful to all those looking for links.
Cheers...
This looks promising i will try, screenshots of your battery stats?
Thanks for your info. Are you facing other issues? Many people have charging issues on new MIUI ROMs, and Sunlight Display not working on several ROM versions. All this working fine for you?
Try Xiaomi.eu Roms - Bloat free, stable & lot of additions
FiX for MIUi 10 now!! ( xiaomi. eu Beta and global Beta Pie roms fix!!!!) (scroll to the end of post)
Update 23.12.2018. thanks to @dianluitao @EnesSastim and couple more people we have working GCam on MIUI 10 8.1
07.07.2019. *****UPDATE********
So for now cam2api is not buuged anymore on Pie roms (for now only beta) and here I will post how and files to go from 0 to full working GCam.
As usually you will need twrp and magisk or just magisk.
Flash in magisk file attached to enable Cam2api
Install recommended GCam (I am using it it doesn't mean it is the best one for you too)
Also there is file with preloaded GCam settings for easy use. How to load it? Well first open file explorer and make folder >>>GCam than make another inside of it >>>Configs than copy/paste Configs html file in it and not go and start GCam app, click couple of times on black area (around shutter button) option menu named :Choose confog pick the one you copy pasted in GCam folder and click Restore. Just to make sure close GCam clear from memory and open again. Settings is loaded and you are ready to use it.
Also thanks to @uvera we have this fix and thanks to all people involved in making GCam ports of html pre loaded settings for it.
Don't be twat, press that *****Thanks***** button below since I know you are all cheap m.... F.... and there will be 0 donations Cheers mates!
P. S. I have some troubles with attaching the files give me some time to work it out. Will update post during the day.
23.12.2018. Update - You will need china stable or miui.eu rom 10.2.3.0 for this to work ( I personal tested it on eu rom) all yopu need it root explorer, build prop editor and 2 files.
1) Download camera.sdm660.so and copy/paste it via root explorer into vendor/lib/hw/ and replace old file ( I used solid explorer to do so also you will need magisk since you need to give solid explorer root privileges ) (.so file is in zip so yes you need to extract it first than copy that file and replace it with old one).
2)go to build prop editor give it root privbileges and add this line : persist.camera.HAL3.enabled=1 (persist.camera.HAL3.enabled and in value box add 1) save it and restart phone
3) after this you will need to flash front camera fix to make front camera working. fix and rest of the files are at the end of this post !
Once again thanks to @dianluitao @EnesSastim @WebDingo and @Savitar (webdingo and savit for front camera fix) and all people responsable for this fix. :highfive:
Hi, I just want to make guide - simple step by step tutorial that people can follow and install GCam on our Mi Note 3 - Jason device. EVERYTHING you do is your own responsibility and I am not to be blamed if something goes wrong while you do so.
1. You NEED a rooted phone, for now, this ONLY works on rooted phones.
2.You need TWRP since you need to flash magisk and camera2api from there. Link to magisk >>> https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Thanks to @topjohnwu
3.Now when you flashed latest magisk you will need to do the same with camera2api (file will be at the end of this thread). Thanks to @uvera00
4.Now you can restart your device and install GCam apk from here >>>> https://www.celsoazevedo.com/files/android/google-camera/ I recommend Arnova's version 6 since it is the latest and it is working ok (it is not bugless) .
5.Now when you done all this start the camera and as you can see it is not working That is because you need to set it up correctly.
So correct (most stable ) settings are :
Advanced : Config camera HDR+ / Pixel 2017 ZSL HDR+
HDR+ parameters (you can play with this and decide which ones are best for you. I use Medium or Very High.
Disable front HDR+ / ON - THIS IS MUST HAVE
HDR+ image quality / Again this is to your own liking I use 97%
Well, this is basically it. Everything else is up to you to experiment with and share your best stable results. This setting I use every day and so far I didn't have any crashes. Also, a thing I forgot to mention in shooting mode you will see HDR+ icon up on the screen if you press it there is HDR+ enhanced mode and I do not recommend this since it is not working correctly with flash and it tends to crash app. I don't recommend it but it doesn't mean you cant use it
Share your best settings and some interesting pics! We are here to help each other.
GCam wouldn't be possible without Arnova, B-S-G, ivanich, scrubber, skulshady, cstark27, miniuser123, UriKill, Tolyan009, Charles_I, azevedo. This is their work and if you want to donate go to GCam donate link and donate to them. I am just here to make a bit simpler. Test GCam and have a nice day
Ok so there was some development for our device thanks to all GCam developers and @WebDingo for asking them to help us out. The new attacked zip is magisk module and it contains cam2api and front camera HDR fix for Mi Note 3. I tested it with couple of GCam versions and it works well. Flash it thry TWRP and enable (it should be enable by default ) in magisk. Also i there is now Arnova version on which manual focus works. The version is Arnova v7 test10 opt5-5t you can download it from official download page of Gcam ports i provided up in the thread. As always test and report
As you all know Gcam is not working on miui 10 builds. For now, we know "fix for it " i tried it on xiaomi.eu 10 stable build and it is working.
1. Download build pro editor from google play
2. Open build prop editor click on three dots in right up corner press + New - Name : persist.camera.HAL3.enabled and in Value field enter number 1 and click save.
3. in prop editor go to search and type persist.camera find this line - persist.camera.dxo=1 and delete it. Restart the phone. Now boot to twrp and flash camera fix for gcam and boot again.
4. Install Gcam you think will be good ( I tied it with OP6-1.2.1-Gcam and Gcam 5.1.018 by SerJo87)
The problem was (we think) during the broken blobs of OIS so by disabling it gcam works.
All of this wouldn't be possible without @dianlujitao @uvera and all other devs on MN3 telegram group. Special thanks to @rayser ( I don't know how are you signed up here buddy).
Findings so far:
Front camera has screen flash (when will MIUI camera implement this?)
HDR+ enhanced works correctly with flash in my case (MIUI EU 9.2.2.0)
HDR+ doesn't work correctly with flash (the flash is already off when the picture is taken)
HDR+ enhanced has greenish issue
60fps recording records 30fps (more like library issue from the base ROM)
Portrait mode doesn't work for front camera (lens blur works, though)
Are you using same settings as i mentioned above? What version of GCam ?
Video mode is very dark.....
I did intall difrently, because i dont know how to use magisk....but the result is the same.:angel:
Edit:
Forget it, video works normally..
You dont need magisk for GCam as an app. You need magisk to enable camera2api (which you did by fleshing it via TWRP) so you can just install/uninstall GCams apks normally. Also you can have more than one GCam installed on your device. I have currently 3 of them. V3.2 + v5 + v6.
What i did was wright the 2 lines with app Build.ini.
Did follow your sugestions for Gcam. Im at work without time to test....
Queston:
Why there isnt option for 13Mb in 16:9 mode? Only 9Mb....
You mean 13 megapixel and 9 megapixel ? Because 16:9 is cropped image and it is in 9mpx resolution.
dimi89 said:
Are you using same settings as i mentioned above? What version of GCam ?
Click to expand...
Click to collapse
Yes, v6.
Hi!
I'm on Xiaomi.EU 8.2.1 Rom .
When i activate the Camera2Api, Google Camera works, but i can not record 4K video with it, and the default Miui camera app also refuses the video recording in 4K.
I've tried a lot of camera apps, with same result. 1080p ok, but the 4K not at all.
What is the solution?
Another question:
It is possible somehow to achive 1080p with 60fps?
maybe with a modded media profiles.xml?
Thanks!
Good Questions...
Gonna try 4K too
P.S. NO problem on 4K both cameras...didnt see the sound.
is this quide for fully working google camera? or just somethings of it? like touch to focus, no crashing, hdr+? no greenish etc..
As I wrote, this is guide to set up GCam there are different versions with different bugs, in v6 manual focus inst working and hdr+ enhances sometimes crash when using with auto flash. There is version 3.2 where manual focus is working but low light images aren't that good. Also there is v5 where in my opinion are the best details. So you download different versions and try to see which one you prefer.
Послато са Mi Note 3 уз помоћ Тапатока
I tried many versions of GCam and stock camera since 8.2.1. is improved a lot. It makes similar photos (with HDR) to GCam.
But for me, best quality of photos is GCam V1,7. But sometimes it do not want to make photo on HDR+, only with enchanced.
So wich version of gcam should i install if i use all in auto with hdr on?
I'm on lineage
Try GCam 5v1.2 arnova or v6 arnova. But keep in mind that it depends a lot on settings of GCam. For GCam 5v1.2 use Nexus 6P and Pixel 2017 ZSL +
Послато са Mi Note 3 уз помоћ Тапатока
I strongly recommend to try this one https://forum.xda-developers.com/showpost.php?p=75850874&postcount=43
Antretng said:
I strongly recommend to try this one https://forum.xda-developers.com/showpost.php?p=75850874&postcount=43
Click to expand...
Click to collapse
That's the first app + settings I've found with no bugs. Haven't deeply tested quality, but everything works.
Night shoots are black for me. It appears flash isnt helping. Same settings i used as in pictures.
Sent from my Mi Note 3 using Tapatalk
GCam is not working
GCam Arnova v6 is not working. It shows Black Screen only after configuring everything on Mi Note 3.
Is there 1080P 120fps slow-motion video capture available ?
Doesnt work on my note 3, i just get black screen. Version V6 and i'm using miui eu 8.3.8
---------- Post added at 09:15 PM ---------- Previous post was at 08:55 PM ----------
OK i fixed, just enabled "Disable front HDR+"
Can anyone give me the link to the latest working google camera mod for this device.
Tested on Mi 6X with AOSP 9.0 v106 by phhusson, but I think it can work on Mi A2, too.
Base rom (before flash GSI images): MIUI 10 8.7.26.
Dual camera working on MIUI Camera app only, and don't forget to turn off "do not disturb" mode.
Steps:
Open /system/build.prop
Append following texts:
Code:
camera.aux.packagelist=org.codeaurora.snapcam,com.android.camera,com.qualcomm.qti.qmmi
vendor.camera.aux.packagelist=org.codeaurora.snapcam,com.android.camera,com.qualcomm.qti.qmmi
persist.camera.preview.ubwc=0
persist.camera.stats.test=0
persist.camera.depth.focus.cb=0
persist.camera.isp.clock.optmz=0
persist.camera.linkpreview=0
persist.camera.isp.turbo=1
persist.camera.set.afd=4
persist.bokeh.switch.lux=290
persist.camera.auxswitch.threshold=330
persist.camera.mainswitch.threshold=419
# The following prop will enable dual camera, if you confuse on crash, just delete it to use single camera.
persist.camera.expose.aux=1
Install Magisk module: Xiaomi Mi A2 Camera (You can find on Magisk).
Reboot your phone, and grant all permissions for MIUI Camera app (com.android.jasminecamera)
Bugs (Most for Mi 6X) :
It may cause others camera apps crash when switching camera twice.
You can find a "fake" camera on some testing apps. (e.g: AIDA64, Device Info HW, etc.)
Some Mi 6X custom roms may see a green screen on portrait mode.
You can't take picture when you enable some features (e.g: beauty).
You can't take square picture or panorama (360° picture).
Referrer (all are from GitHub, sorry I can't post with links due to forum rules for newbie.):
MI6XDev/treble_fix_for_wayne/wiki/en_us#dual-cam
TadiT7/xiaomi_wayne_dump/blob/CORRUPTED---wayne-user-8.1.0-OPM1.171019.011-8.7.12-release-keys/system/build.prop
TadiT7/xiaomi_jasmine_dump/blob/jasmine-user-8.1.0-OPM1.171019.011-8.9.20-release-keys/system/system/build.prop
Thank you for sharing!
But pn Pie 9.0 GSI only 4.5 camera module from Xiaomi Redmi Note 5 Pro thread works and opens up. And unfortunately these build.prop lines do not help to activate second camera in MIUI CAmera app. Any ideas?
WHAT WORKING
RIL (CALL WIFI )
BLUETOOTH
HOTSPOT
BRIGNEST AUTO BRIGNEST
SUNLIGTH MODE
FLASH LIGTH
MI AOD
SCREEN RECORDER
VIDEO
MUSIC VIPER
CAMERA USE GOOGLE CAM FOOTEJT CAMRINGO OR OTHER CAMERA FROM PLAYSTORE
ULTRA BATRE SAVER N SAVE BATRE WORK PERFECT
GPS
FACE UNLOCK
READING MODE
SOUND RECORDING WORK SUPER PERFECT
SCREN RECORDING WORK PERFECT WITH SYSTEM SOUND SUPER PERFECT U CAN SEE FROM VIDEO
NOTIFICATION LIGTH
FULL SCREEN MODE
THEMES WORK EVERYTHING
ROM INCLUDING SOME COOL THEMES
DARK MODE ROTATION
PIP
GAME TURBO
FOCUS MODE ON SCREEN TIME
PLAYSTORE
GOOGLE LENS
GOOGLE ASSISTEN
VIDEOCALL WA ...MESENGER DUO WORKING PERFECT
LIVE FACEBOOK INSTAGRAM YOUTUBE WORK PERFECT ETC
RADIO FM STOCK CAMERA MAYBE MORE LIGTH BUTTOM DONT
JUST STOLE MY WORK.......
PLEASE DON’T JUST SHARE LINK DOWNLOAD !!!!!!!!!!!
I WILL MOVE LINK OF ROM
SUBSCRIBE MY CHANEL FOR SUPPORT MY WORK.. TY…
OR YOU JUST STOLE MY JOB WITHOUT
HOW TO INSTAL!!!!!!!!!
DOWNLOAD THIS TWRP !!!!!MOD EDIT: YT LINK REMOVED
TWRP DOWNLOAD: https://mega.nz/#!QYYVwaxQ!d5at4gqabEKY0OU37XQYvehxIEt4plrxdDqkV17Ke8g
GO TO YOUR BOOT RECOVERY INSTAL TWRP.IMG GO TO RECOVERY>INSTAL>KLIK INSTAL IMAGE >WAIT UNTIL DONE…..
NOW REBOOT TO RECOVERY…MAKE A BACK UP YOURR ROMM !!!!!!!!!!!!!!!!!!!!!!!
NOW XTRACK YOUR ROM DOWNLOAD … MOVE TO BACK UP FOLDER….. NOW REBOOT RECOVERY THAN RESTORE ALLLLL… DONE ENJOYYYY!!!!!!!!!
ROM REVIEWW N DOWNLOAD MOD EDIT: Telegram link removed, please read the STICKY!
It support only one sim... But the mido has dual SIM support...
great work man but don't get me wrong
your typing is so disturbing
Anyone tried gcam on it ?
it keep asking for password to start .. are you sure you didnt encrypt it ?
Thread closed due to Youtube promotion
strongst
Forum Moderator