Pyle pldnandvr695 root - Android Head-Units

Has the Pyle PLDNANDVR695 been rooted and installed with custom firmware or Android OS upgrade. It comes pre installed with Android 4.4.4 Kit Kat and was wondering its possible to do the Android OS upgrade.

Roxas125 said:
Has the Pyle PLDNANDVR695 been rooted and installed with custom firmware or Android OS upgrade. It comes pre installed with Android 4.4.4 Kit Kat and was wondering its possible to do the Android OS upgrade.
Click to expand...
Click to collapse
looking intio update and custom rom but root has be achieved properly.....terminal editor kingroot 4.5 ONLY and kingroot to su zip google follow directions..use es file explorer to make mrw folder if cannot copy ....set all su requests to allow due to poor dpi before su zip

I have been doing a back and forth with Pyle Support because, I installed the firmware update. After install I lost all bluetooth capability. They want me to send it in and I am so furious I do not trust them. Does anyone have access to firmware for an android touchscreen headunit

PYLE Support leaves alot to be desired so, I am looking for a way to reprogram this head unit without pyle. After all the head unit only says pyle on the housing. Nowhere within the software or firmware does it say pyle. I used the firmware upgrade on the pyle site for my PYLE PLDNANDVR 695 it was to uprage to kitkat 4.4.4 but it knocked out the bluetooth. So until I/We can find a way to bring this to a solution I am using a usb to connect to my phone. Ideas?

e.penrose1 said:
PYLE Support leaves alot to be desired so, I am looking for a way to reprogram this head unit without pyle. After all the head unit only says pyle on the housing. Nowhere within the software or firmware does it say pyle. I used the firmware upgrade on the pyle site for my PYLE PLDNANDVR 695 it was to uprage to kitkat 4.4.4 but it knocked out the bluetooth. So until I/We can find a way to bring this to a solution I am using a usb to connect to my phone. Ideas?
Click to expand...
Click to collapse
Finally got the Factory Code for anyone who is on a quest as I am. Code for factory settings is 13248756. Being I am a complete novice and have no clue what I am doing all hep is welcome.

Here are the Specs:
rockchip STT-TEC-P1 Specification
Technical Specification of rockchip STT-TEC-P1, auto-generated by SpecDevice application. Actual hardware list.
specdevice.com

Related

Ehotch 4.4 2din pure android cortex a9

This is another unbranded chinese unit. I tried all simple one click methods to root but none worked. Any info on this please.
ehotch 8081
I have the 8081 model running 4.4.2. I am having issue with the stock play store app connecting. I was curious if anyone had a URL for this company where firmware and software updates can be found.

Help rooting head unit

Hi all,
I have an Android head unit in my car running 6.0.1 Marshmallow, it's an Xtrons TCD629A.
About device returns:
Processor type - QuadCore-R16
Android version - 6.0.1
MCU version - 5.3.19-36-10-E50201-170215
System version - V7.3.1_20170505.204845_MLT1-DVD
DVD version - 2.13.15-1200xh-150417
Searching online it is very hard to find much information on this unit (I should have got an RK3188 based unit as there's a world of information about them).
So far I have tried: KingRoot, KingoRoot and One Click Root. None of which have provided root access after multiple attempts.
KingoRoot offers the most interesting result, it gets to 90% and pauses for a few minutes, then the screen flickers a bit and the unit restarts so it is obviously attempting something that doesn't agree with the unit, but at the same time isn't causing it any harm.
Does anybody have any advice which may help with rooting this device, or alternatively a pre-rooted restore image. In the case of flashing a pre-rooted image to the device, I am happy with anything from KitKat to Marshmallow.
Thank you in advance.
Xtrons TCD698A - have the same problem ?
Received TCD629A with no power harness, I don't mean to hijack this thread but are there another power harness that is compatible with this unit?
Where to download fw V7.3.1_20170505.204845_MLT1-DVD?
axicom said:
Where to download fw V7.3.1_20170505.204845_MLT1-DVD?
Click to expand...
Click to collapse
Would it work for a Xtrons TS702L at all?

Android Head Unit Identification MCU ZHAN(NOR)

Hello,
i buyed a Taffio S200 Android Radio for my Opel Astra J with an Octa Core PX5 2GB Ram and 32Gb
Can anyone tell me how i come into the Recovery Mode? The Radio havn't any Buttons, only a small Reset Button. I tryed it with Terminal Emulator but it's rebooting i see a little bit like Recovery Menu but than it's rebooting again to Android.
I search a Custom Rom too, but i only read about MTCD and MTCE but my device shows MCU version: 2018-04-16 17:04:06 ZHAN_(NOR)_90_C9RD6686_CAN(A)PX5D1804160.
I couldn't find anything about this mcu.
Have anyone an idea how to root this device? I can't try a lot of things, because i can't restore a brick without Recovery Menu and stockrom.
Does your HU have a USB port? If so, plug in a USB keyboard, reboot/reset the device and try pressing Alt + Print Screen while tapping i or e (both works)
MADNESSSsss said:
Does your HU have a USB port? If so, plug in a USB keyboard, reboot/reset the device and try pressing Alt + Print Screen while tapping i or e (both works)
Click to expand...
Click to collapse
Yes, but it warmed up the device, it shows a countdown of 5 seconds but then it starts normally.
DennisBa said:
Yes, but it warmed up the device, it shows a countdown of 5 seconds but then it starts normally.
Click to expand...
Click to collapse
Have you tried enabling adb over Wifi on the device using https://hvdwolf.github.io/Joying-RootAssistant/ (or even rooting ~ some risk is there, so try the adb method first) and using an adb command to reboot to recovery?
MADNESSSsss said:
Have you tried enabling adb over Wifi on the device using (or even rooting ~ some risk is there, so try the adb method first) and using an adb command to reboot to recovery?
Click to expand...
Click to collapse
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
DennisBa said:
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
Click to expand...
Click to collapse
The Joying Root Assistant didn't work for you to root the device?
Some firmwares lock you out of the recovery menu, where it can be only used for updating your firmware. Maybe that's why?
DennisBa said:
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
Click to expand...
Click to collapse
Your unit is a WINCA/ROADNAV manufactured S200 and it can be rooted. I know because I have exactly the same MCU firmware and probably the same Android build. Check out the rooting thread on the first page of this forum. In there is all the info you need.
DennisBa said:
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
Click to expand...
Click to collapse
after updating the commands on the steering wheel still work?
looxonline said:
Your unit is a WINCA/ROADNAV manufactured S200 and it can be rooted. I know because I have exactly the same MCU firmware and probably the same Android build. Check out the rooting thread on the first page of this forum. In there is all the info you need.
Click to expand...
Click to collapse
Would you backup your stock rom?
after installing the joyng android 8.0 my controls on the steering wheel have stopped. I would like to install the stock again.
eduardofluh said:
after updating the commands on the steering wheel still work?
Would you backup your stock rom?
after installing the joyng android 8.0 my controls on the steering wheel have stopped. I would like to install the stock again.
Click to expand...
Click to collapse
I could but my stock ROM will most likely not work properly on your unit. Each ROM differs slightly from car to car with the WINCA units. It's daft but it's how they chose to design.
looxonline said:
I could but my stock ROM will most likely not work properly on your unit. Each ROM differs slightly from car to car with the WINCA units. It's daft but it's how they chose to design.
Click to expand...
Click to collapse
You are my last hope. The controls on the steering wheel do not work, not even the Parking Sensor. If it goes wrong, nothing will change. Could you backup and send me? I would be very grateful.
eduardofluh said:
You are my last hope. The controls on the steering wheel do not work, not even the Parking Sensor. If it goes wrong, nothing will change. Could you backup and send me? I would be very grateful.
Click to expand...
Click to collapse
Please send me the link to where you purchased your unit as well as all you know about the manufacturer.
Mine too is ZHAN_(NOR) i bought it in Polish Reseller, original seller is bluepowercn.com, the name of the unit is GREATSO S200. Cannot find in Russian Forums and XDA any information about that ROM or UPDATES/MODS. Alie Store:
Bluepower Electronics co., ltd
youtube.com/watch?v=AEvCX2bomoA - info from Witson with same MCU, Ok Found mine it`s: W2-W279
Is it possible to upgarade or install mod rom to W2-W279? I have some issues with OBD2 connection via Bluetooth and Bluetotoh contacts storage plus minor bugs... cannot find on XDA if ZHAN_(NOR) is possible to upgrade or change of the stock rom.
DennisBa unit is W2-W072 - Opel Astra J - i think its the same brand and topic is consistent.
Olá,
Como faço atualização desde modelo MCU ZHAN_(nor)_90_C9RD 7786 CAN(A)D1801311
Muito obrigado!.
DennisBa said:
Hello,
i buyed a Taffio S200 Android Radio for my Opel Astra J with an Octa Core PX5 2GB Ram and 32Gb
Can anyone tell me how i come into the Recovery Mode? The Radio havn't any Buttons, only a small Reset Button. I tryed it with Terminal Emulator but it's rebooting i see a little bit like Recovery Menu but than it's rebooting again to Android.
I search a Custom Rom too, but i only read about MTCD and MTCE but my device shows MCU version: 2018-04-16 17:04:06 ZHAN_(NOR)_90_C9RD6686_CAN(A)PX5D1804160.
I couldn't find anything about this mcu.
Have anyone an idea how to root this device? I can't try a lot of things, because i can't restore a brick without Recovery Menu and stockrom.
Click to expand...
Click to collapse
Hi, my car is a Opel Astra J, too and I need to reflash the MCU. I flashed the wrong one... Can you share your MCU maybe? Thank you!
Or maybe someone could share this firmware to me like in the pictures? After flashing wrong MCU and newer system version, my Canbus Box and car won't be detected anymore.
I need this firmware with ZHAN(NOR) MCU (for Opel Astra J).
Anyone who can help me?
Please check out my own thread here:
Winca/Roadnav S200 PX5 ZHAN_(NOR) MCU & firmware (Opel Astra J)
Hi guys. Maybe and hopefully someone of you can help me here. I bought a used Android system based on the Winca S200 with ZHAN_(NOR) MCU for the Opel Astra J. While looking for new system software I stupidly flashed a newer system version, but...
forum.xda-developers.com
If anyone has a dump/backup of this firmware and mcu, please let me know.
Big thanks in advance.
Good morning..
I ask for your help.
Few years ago
I bought an Android radio, unfortunately I don't know what it is.
Today I need to update it if possible, but I don't understand what model it is.
I enclose any useful information, grateful if you can help me.
thank you all

Update HU PX5 to Android 8 failed

Hi.
I disturb you for having an opinion on the possibility of recovering an Android PX5 car radio that I upgraded to Android 8 by following the instructions on the XDA form
https://forum.xda-developers.com/and...units-t3847477.
Unfortunately now the car radio looks as if it is going into a loop and does not give me access to recovery.
Before attempting to update the firmware I had upgraded the Mcu KLD 2.60b2 version to the KLD 3.01 version without having any problems whatsoever.
I tried several things but maybe I lost my compass and to avoid other problems I would like to get your opinion first.
I enclose a video illustrating the current situation.
https://youtu.be/uReSCNkd_VE
..Sorry for my english
Regards

Seeking Root for XHCN intel 9853 Head Unit

Hi all
I might have bought the only android device in the entire China, that is un-root-able. :crying:
It is a ZOYOSKII fra Aliekspress with following info:
10,4" screen
Android 9 PIE
CPU Info: CPU:Intel X86_OCTA-CORE 1.8Ghz SC9853 4+64Gb
MCU Version: 2019.10.15 09:51:58 XHCN_53_l82_G23P48F64_Ver:1.0
It seems like the "new" intel processors is not the most used in the industri.
The only other i have seen, is the Joying devices, but i havent been able to find a root that i dear to use on this unit.
Can you help with a root-build for this or can i use some allready-existing root?
Thanks.
There is no "ready to use" rooted build for any SC9853 unit.
You need to use the way as described in the Joying thread and build your own rooted boot.img.
rigattoni said:
There is no "ready to use" rooted build for any SC9853 unit.
You need to use the way as described in the Joying thread and build your own rooted boot.img.
Click to expand...
Click to collapse
Thanks for your reply.
At least i can make some kind of custom root.
Is it possible to backup the original firmware before i bring hell on it?
Thebat18 said:
Thanks for your reply.
At least i can make some kind of custom root.
Is it possible to backup the original firmware before i bring hell on it?
Click to expand...
Click to collapse
1st of all: You need to get in contact with your seller to get the OEM firmware.
2nd: Install the Joying Extra tools by @surfer63
3rd: continue with posting a screenshot from the extra tool
did you end up finding any information on this unit?
I bought one off of a friend that has the same information and I can't seem to get a few things working
Do you know the Security Code for this unit?
Have you got the latest build?
3368 is the code I believe
have you got something new for your head unit. my head unit also the same, I used joying firmware and root but not compatible
I have the same headunit, has anyone figured out how to root this device from this seller (ZOYOSKII)? I have multiple issues with the headunit, and would be great to collaborate. Another seller (Sinosmart) has the same unit, is the firmware / rooting process the same?
I have one of these too, i need to root so I am able to hide the navbar at the top.
Any updates on this? I just bought a used car with this already installed. I just want carplay and a newer version update.

Categories

Resources