Essgoo - 8227L - Sound balance & fader - Android Head-Units

Hello everyone.
I recently bought a android head unit.
I have additional speakers in rear and they are louder than the front ones. When i had older radio i could set it up by balance betwen front and back.
Now this option is missing in sound settings (i dont have that icon in top right corner).
My system info:
Android: haoling_00009_V001_20191128
OS: 9.1 XY Auto: 3.1 (8227L)
DDR: 1G Flash: 16G
CPU: A7 1.3GHz
MCU: 3.1 (8227L)
Can i downgrade or upgrade to get this option?
If yes, which firmware shloud i use?
Thanks in advance for your help

What does reseller suggest when contacted for support?

marchnz said:
What does reseller suggest when contacted for support?
Click to expand...
Click to collapse
I bought it from second hand, so I don't have contact to him.

Try to search in Settings the option of Sound and Balance. It's there.

Related

Questions regarding a YT9217B Android Head unit XY Auto (8227L) YT9217B_00002_V004_20

I just bought a fairly cheap Chinese Head unit for my 2005 Accord. The hardware is not bad but the software has some issues. The manual is as always horrible and the seller has no info on Software Updates or a link to a Website that has them.
Does anyone have a link the stock Firmware just in case I decide to mess with the unit and mess thinks up? I am more afraid with loosing the Climate Controls and making the car dangerous to drive (no heat, AC etc) in bad weather conditions.
In addition is there a link where I can get the latest version or a better version of the App? If I flash a different firmware do I need to change the CAN parameters to match my Vehicle so that the Climate Control works properly?
The Specs are the following:
Android: YT9217B_00002_V004_20190815
Abdroid OS: Android 9.1
XY AUTO: 3.1 (8227L)
CAN BUS: 3.0 (8227L)
DDR: 2GB Flash: 32G
CPU: A& 1.3Ghz x 4
MCU: 3.1 (8227L)
In case I flash a non stock firmware do I have to reprogram all the Climate buttons of the unit?
Or maybe it would be better to root the unit and install CarWebGuru or Agama?
Thanks for the info
Mike
antiriad76 said:
I just bought a fairly cheap Chinese Head unit for my 2005 Accord. The hardware is not bad but the software has some issues. The manual is as always horrible and the seller has no info on Software Updates or a link to a Website that has them.
Does anyone have a link the stock Firmware just in case I decide to mess with the unit and mess thinks up? I am more afraid with loosing the Climate Controls and making the car dangerous to drive (no heat, AC etc) in bad weather conditions.
In addition is there a link where I can get the latest version or a better version of the App? If I flash a different firmware do I need to change the CAN parameters to match my Vehicle so that the Climate Control works properly?
The Specs are the following:
Android: YT9217B_00002_V004_20190815
Abdroid OS: Android 9.1
XY AUTO: 3.1 (8227L)
CAN BUS: 3.0 (8227L)
DDR: 2GB Flash: 32G
CPU: A& 1.3Ghz x 4
MCU: 3.1 (8227L)
In case I flash a non stock firmware do I have to reprogram all the Climate buttons of the unit?
Or maybe it would be better to root the unit and install CarWebGuru or Agama?
Thanks for the info
Mike
Click to expand...
Click to collapse
Give the search a try, seems there's info on: YT9217B
What is the best way to root this device? I basically want to upgrade the radio app and just use a 3rd party home app. I there a recommended method for OS 9?
Did you catch some progress? I have the same unit on the Passat car. All is working quite well - we need "simmple" root, but for this head unit and android 9.1 is not abvailable. We don´t need any big update. I´m looking for FM RDS unlock, more CANBUS aplication, contacts APK and music improvement - thats all.
you should check out this thread here.
https://forum.xda-developers.com/an...-firmware-chinese-7-head-unit-ac8227-t3931863

No brand headunit

Hello I have an unbranded headunit from eBay. I’ve already contacted the seller and tried my best to scour these threads but that hasn’t helped. I have no control of my subwoofer port on the back of there unit. The upgraded firmware that they show on the advertisement has an equalizer that includes sub, lo, mid, and hi but I have a 4 band with hz. I’m looking for the right firmware/mcu version
What my unit says now.
Android: YT9213A_00009_V001_20200312
Android os: 9.1 XY AUTO: 3.2 (8227L)
CAN Pro: 3.0 (8227L)
DDR: 2G FLASH:16G
Cpu: a7
Display: 1024x600
MCU: 3.1
What I’m looking for it to say
Android: YT_9217c_00005_V003_20181222 HIFI
Not important
Amplifier: ac7315 mos Bile duct 45wx4
Mcu: HW8227L 3.3- SWO-1.3
If that’s not possible I at least would like the most current update for this device or if I can flash another mcu firmware or software from a different device to it that would work too. I just want/need something better than what I’m working with now.
. Thanks in advance for any help.

unbranded Android Headunit Audio tweak

Hi Guys,
Its been a long time since i posted a thread in XDA.
Now i am back with my Android Headunit.
I got a cheap Android headunit from a local dealer.
Everything is good but i dont like the way Audio is delivered.
There is no clarity and life to music.
Using Agama Car launcher with Poweramp (full version)
Is there any tweaks to get the best audio output from this unit?
unit details below.
Android : YT9216B_00002_V004_20190801
Android OS: 9.1
XY Auto: 3.0 (8227L)
Can Bus: 3.0 (8227L)
DDR: 2GB
Flash: 16GB
CPU: A7: 1.3Ghz x4
MCU: 3.1 (8227L)
Factory code is 8888 for this unit.
My unit look like this
Car Stereo reference link
You can try Viper4Android - works with Poweramp.
Ipse_Tase said:
You can try Viper4Android - works with Poweramp.
Click to expand...
Click to collapse
Do we need to root unit to get it work?
bondarun said:
Do we need to root unit to get it work?
Click to expand...
Click to collapse
Yes... https://forum.xda-developers.com/showthread.php?t=2191223

Unbranded 8227L_demo - No access to onboard computer - Simulated buttons not working

Hi everybody!
I recently bought a 8227L_demo unbranded Chinese android stereo.
Unfortunately, I can’t control the screen on the dashboard because the simulated buttons are not working…so I can't access the clock and time settings on my display...
Below you can see all my system information (unfortunately I can't attach picture because I'm a newbie).
I have a CANBUS Raise psa-rz-15 device.
Steering Wheel Controls are regularly functioning.
My car is a Citroen C3 (year 2008).
I set the Peugeot 307 (2002-2013) Canbus protocol; however, I tried all the available protocols one by one but nothing changes.
Anybody else has the same problem? What can I do to solve?
Maybe with a firmware update?
Thanks again in advance
Android: YT9213AJ_AHD_00011_V001_20200323
Android os: 9.1
XY AUTO: 3.2 (8227L)
CAN PRO: 3.0 (8227L): )/Peugeot307(2002-2013)
DDR: 1G
FLASH: 16G
Cpu: A7 1.3Ghz x 4
Display: 1024*600
MCU: 3.1 (8227L)
Kernel version
3.18.22
[email protected] #4
Mon Mar 23 17:18:00 CST 2020
Build number
android-trunk-m0.AC8227L-V1.0
What did the reseller suggest?
marchnz said:
What did the reseller suggest?
Click to expand...
Click to collapse
Unfortunately I wasn't able to contact the seller...
Go to -> Car setting -> General
Touch the gear top right.
Enter 8888
Change CanBus Settings to Peugeot 307
Hi!
I already set the Peugeot 307 (2002-2013) Canbus protocol and I tried all the available protocols one by one but nothing changes...
My problem is shown here: https://youtu.be/IWp7nXfxk94?t=1152
bosun8472 said:
My problem is shown here:
Click to expand...
Click to collapse
Hi,
Do you solve your problem ? i have the same for my 308 car with PSA-RZ-15 CANBUS ?
Which canbus do you have ?

Fader-Balance not working on 8227L_Demo Head unit

Hi guys,
I have a Chinese Android headunit with the 8227L_Demo chip and the fader-balance is not working. I have the option but when I move the dot around the car image, the sound still plays on all 4 speakers. Also, the EQ settings doesn't seems to change anything. The other bug I have is there a big gap/jump in the volume between 17 and 18 and the sound mute for half a second when I switch from 17 to 18 and vice versa.
Anyone experienced something like that ?
As I can't upload any image here I write all the info of my headunit.
Android: YT9213AJ_00011_V001_20200330
Android OS: 9.1
XY AUTO: 3.2 (8227L)
CAN PRO: 3.1 (8227L)
DDR: 1G
FLASH: 16G
CPU: A7 1.3Ghz x 4
Display: 1024*600
MCU: 3.1 (8227L)
me too, same problem. my unit is Blaupunkt key largo 970 but CPU-Z and some other in system hidden settings confirm that this unit is alps_ 8227L_Demo.
can you share your Equalizer.apk app?
plz help me i cant use sound fader , the sound too loud behind me and it disturbing mz
Hello Guys, I don't have any solution, but I have the same issue. Fader doesnt work. As far as I know, this is not because of the HU but the Harness. I have a JBL System and I had to buy an extra harness which doesnt allow me to use FADER.
My 2 cents.
Pablosky.cl said:
Hello Guys, I don't have any solution, but I have the same issue. Fader doesnt work. As far as I know, this is not because of the HU but the Harness. I have a JBL System and I had to buy an extra harness which doesnt allow me to use FADER.
My 2 cents.
Click to expand...
Click to collapse
can you show us picture please
I'm afraid guys, there is no solution. The reason it doesn't work is that your unit does not have a dedicated audio chip. Older units all had it, like YT9216, YT9217, YT9218, and even (older) YT9213AJ. If you buy Android 8.x or 9.x then the audio chip will be present.
See the pictures below explaining the issue.
The audio chip is TDA7729 (TDA7719 , CSC37033 , SCS37534).
Now there is a fix but it requires advanced soldering skills and a proper setup.
Sorry to be the bearer of bad news.

Categories

Resources