Hello guys ..
This is my first post to this fourm and i hope to get THE help
I installed CM10 on my phone LG L7 "P700" .. today I tried to flash AC!D and i flashed then i wiped cache
then i reboot system >> but i found the phone has been stuck on LG LOGO
I tried servel times to boot into system or recovery but no thing happened
at last i decided to flash V10K Stock rom Via KDZ
But it told me "Phone Was Not found"
I tried to install drivers again and again but the problem still here >>
PLEASE HELP ME GUYS
Did you tried to Boot into Recovery manually?
YES
Petelinow said:
Did you tried to Boot into Recovery manually?
Click to expand...
Click to collapse
more than 10 times .. but it only vibrate then .. no thing happened
Solved
YEAAAAAAAAHH .. THe PHOnE WoRKeD
with adb ..
adb reboot recovery
lem221 said:
YEAAAAAAAAHH .. THe PHOnE WoRKeD
with adb ..
adb reboot recovery
Click to expand...
Click to collapse
Hi my Friend,
how did u do that ??
my message at ADB ist "No Device"
did you have Win 7 or Win 8
Greets:good::good:
no
DuckDagobert007 said:
Hi my Friend,
how did u do that ??
my message at ADB ist "No Device"
did you have Win 7 or Win 8
Greets:good::good:
Click to expand...
Click to collapse
Iam not keen on 7 or 8 >> Iam so happy with XP SP3
I love it ..
try to reinstall drivers
... i think the Problem is that i used WIN8
Your phone was not bricke, it was in bootloop, bricking a phone = It doesnt react to anything, presing power button does nothing, and its completely death, like a ****ing brick
Hi,
but where is the Prolem ??
Iam 1 Week at that F*** L7 to boot , but dosn`t Work
@ ADB message:
adb Server is out of Date. Killing...
*daemon started successfully*
error: Device not found
Greets
Hey guys I just installed the full image of 7.1.2 beta 2 over top of beta 1 using Flashfire without the bootloader and modem selected and all went fine until I decided to use Flashfire to upgrade the bootloader and modem forgetting that we must use Fastboot as I am new to Flashfire and I was reading all through the beta thread before I did it and didn't understand we still must use Fastboot so anyways I am stuck in a hard brick now with the phone not powering on at all and can't do anything to restore it as my Windows 10 now detects the phone as unknown device (device descriptor request failed) is there anything I can do at this point as I just bought this phone used.
The error that I got in Flashfire was that the device storage is full when updating the bootloader as the modem went fine.
@rmorris003
You said the phone won't even power on. You mean no Google? Hold the power button down for a couple of minutes and see if it will reboot. If not put it on a charger, and after fully charging try the long press power button again. If you can get it to start, try to put it in fastboot mode. (ie. power+vol dn). If you can get to bootloader you can send fastboot commands and fix it. If you can get to this point, there are instructions here.
rmorris003 said:
Hey guys I just installed the full image of 7.1.2 beta 2 over top of beta 1 using Flashfire without the bootloader and modem selected and all went fine until I decided to use Flashfire to upgrade the bootloader and modem forgetting that we must use Fastboot as I am new to Flashfire and I was reading all through the beta thread before I did it and didn't understand we still must use Fastboot so anyways I am stuck in a hard brick now with the phone not powering on at all and can't do anything to restore it as my Windows 10 now detects the phone as unknown device (device descriptor request failed) is there anything I can do at this point as I just bought this phone used.
The error that I got in Flashfire was that the device storage is full when updating the bootloader as the modem went fine.
Click to expand...
Click to collapse
Hello... Well if your device is recognized as unknown, you could try to give this a shot:
https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Try to install Qualcomm driver first check the device manager. If you see your phone recognized as:
HS-USB QDLOADER 9008
You may be lucky!
Good luck...
5.1 said:
Hello... Well if your device is recognized as unknown, you could try to give this a shot:
https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Try to install Qualcomm driver first check the device manager. If you see your phone recognized as:
HS-USB QDLOADER 9008
You may be lucky!
Good luck...
Click to expand...
Click to collapse
I will try this when I get back from work, I just cant get my pc to see it as anything other than unknown device as it says this is the best driver for it.
rmorris003 said:
I will try this when I get back from work, I just cant get my pc to see it as anything other than unknown device as it says this is the best driver for it.
Click to expand...
Click to collapse
I see... There's a txt file in the driver folder. Follow its instructions.
Good luck...
5.1 said:
I see... There's a txt file in the driver folder. Follow its instructions.
Good luck...
Click to expand...
Click to collapse
I am stumped, I have disabled driver enforcement and can't get any drivers to see my phone so I am not sure what to do.
rmorris003 said:
I am stumped, I have disabled driver enforcement and can't get any drivers to see my phone so I am not sure what to do.
Click to expand...
Click to collapse
You disabled driver signature and rebooted your computer? Then installed Qualcomm drivers from the thread I linked you to? I think you have to reboot your computer once more...
Good luck...
I held the power and vol down and now it shows up under com ports so this is a good sign.
Ok got bootloader back and now put twrp on, I had to use qfil with nexus6p_fix_bricked but it got stuck at writing system.img but atleast the phone is on now.
Flashed the 7.1.2 beta 2 full image using the fastboot method included and all is back to normal.
Thanks so much for the help.
rmorris003 said:
Ok got bootloader back and now put twrp on, I had to use qfil with nexus6p_fix_bricked but it got stuck at writing system.img but atleast the phone is on now.
Flashed the 7.1.2 beta 2 full image using the fastboot method included and all is back to normal.
Thanks so much for the help.
Click to expand...
Click to collapse
Wow glad it worked for you... You might push the thanks button in the OP of the thread where you found the debrick tools and thanks @tenfar since he offered the solution. He already saved a few N6P devices. I only linked you to his thread which you could have found yourself anyway...
Cheers...
5.1 said:
Wow glad it worked for you... You might push the thanks button in the OP of the thread where you found the debrick tools and thanks @tenfar since he offered the solution. He already saved a few N6P devices. I only linked you to his thread which you could have found yourself anyway...
Cheers...
Click to expand...
Click to collapse
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
rmorris003 said:
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
Click to expand...
Click to collapse
You could report your experience in the other thread. Maybe it could help other users who faced the issue you had. :good:
Cheers...
rmorris003 said:
I'm pretty sure I was reading it before but I had to do some extensive reading on how to get the driver to read properly. I work night shift so I was kinda tired yesterday.
Click to expand...
Click to collapse
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Clarkeofcurtis said:
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Click to expand...
Click to collapse
I have the same exact problem, everytime i try to flash with qfil it says it can't connect to my COMPORT
Clarkeofcurtis said:
Hi there, I'm extremely new to Forums and the whole android scene please could you help?
I have the same issue with my Nexus 6P Hard bricked, only detected as a 9008 Port, no vibrations no power nothing!
I've tried to follow so many guides for the past three days however I've managed nothing. I've tried to do as you mentioned in the first posts, used the nexus6p_unbrick in Qfil but Sahara download fails.
Please Please Help, No Warranty just a Brick!
Click to expand...
Click to collapse
Falitheman said:
I have the same exact problem, everytime i try to flash with qfil it says it can't connect to my COMPORT
Click to expand...
Click to collapse
Hello,
Someone mentioned this in another post:
Hold volume up and plug the USB cord to.your computer and start qfil flash. Keep holding volume up until the flash ends...
Good luck...
5.1 said:
Hello,
Someone mentioned this in another post:
Hold volume up and plug the USB cord to.your computer and start qfil flash. Keep holding volume up until the flash ends...
Good luck...
Click to expand...
Click to collapse
So i have some good news...it connects now. it says start sending programmer but then it says download failed: unable to download flash programmer using sahara protocol and then it fails. Any help?:crying:
Falitheman said:
So i have some good news...it connects now. it says start sending programmer but then it says download failed: unable to download flash programmer using sahara protocol and then it fails. Any help?:crying:
Click to expand...
Click to collapse
Hey,
What version of qpst did you install?
Good luck...
5.1 said:
Hey,
What version of qpst did you install?
Good luck...
Click to expand...
Click to collapse
I am using 2.7.441
Update: It seemed to be working for a second but then it says download failed: qsahara server fail: process fail. Any idea what that means? I really need my phone back
Falitheman said:
I am using 2.7.441
Update: It seemed to be working for a second but then it says download failed: qsahara server fail: process fail. Any idea what that means? I really need my phone back
Click to expand...
Click to collapse
Hey,
Google qpst 2.7.453
It's easy to find. Scan the files on virustotal.com though.
Maybe the older versions are incompatible...
Good luck...
5.1 said:
Hey,
Google qpst 2.7.453
It's easy to find. Scan the files on virustotal.com though.
Maybe the older versions are incompatible...
Good luck...
Click to expand...
Click to collapse
I tried with the version you suggested and i got the same error i just had. Can you send me your version so i can see if that works?
Hello Guys,
i have a Problem with this Handy. It was stuck in a Bootloop for two days then i tried to flash with a cm rom but appearently it didnt worked and messed up the Fastbootmode. Today i successfully restored my Z1 with the QPST Software but the Bootloader still wont work. Can someone tell me how to fix this? Because i want to install a other rom (current rom displays a watermark like thing on the screen).
Thanks and have a nice day
same problem here .
Toastbrotstern said:
Hello Guys,
i have a Problem with this Handy. It was stuck in a Bootloop for two days then i tried to flash with a cm rom but appearently it didnt worked and messed up the Fastbootmode. Today i successfully restored my Z1 with the QPST Software but the Bootloader still wont work. Can someone tell me how to fix this? Because i want to install a other rom (current rom displays a watermark like thing on the screen).
Thanks and have a nice day
Click to expand...
Click to collapse
plz tell me how u used qpst software to recover your phone
mmprknown said:
plz tell me how u used qpst software to recover your phone
Click to expand...
Click to collapse
well i just followed a tutorial in youtube since it didnt worked with the adb sideload.
i just connected my z1 while holding volume up so that the software can recognize it. Then i loaded the qualcomm firmware and selected the xml of the tutorial with a recovery.img. After that i just clicked download and it worked again.... except i cant get to the bootloader. My thoughts are that i somehow ripped/deinstalled the bootloader.
Good Morning. I made a big mistake because I was on a oreo rom with twrp 3.2.1-8 and wanted to get back to a nougat rom. I made the twrp 3.2.1.0 flash forgetting to format in ext4. With the 'Axon 7 toolkit' program I was able to redo the twrp 3.2.1-8 flash. The phone never woke up again. In the devices of windows 7 or 10 shows usb unknown and does not even show the led light. I have already tried everything and even with the DFU MultiDL Tool program, but nothing.
My axon 7 came back to life again. I want to thank developers for the ability to flash new roms and also for making tuturials to revive when something goes wrong.
jocasbarb said:
My axon 7 came back to life again. I want to thank developers for the ability to flash new roms and also for making tuturials to revive when something goes wrong.
Click to expand...
Click to collapse
Please tell me how you fixed that... I'm with a similar problem. Thanks
joaocandeias said:
Please tell me how you fixed that... I'm with a similar problem. Thanks
Click to expand...
Click to collapse
I'm working now. I'll tell you later what I did
jocasbarb said:
I'm working now. I'll tell you later what I did
Click to expand...
Click to collapse
ok ok, thanks in advance!
To clarify my axon 2017G did not give any sign of life and in the device manager showed 'usb unknown'. I put on the load for a day and gave no sign of life. As it did not give a signal I decided to tape the three buttons to ensure that it had no charge for a few hours. I turned the chain on later and he turned it on and off quickly. I connected it to the pc (windows 10) and it already appeared 'Qualcomm hs-usb qdloader 9008', but with an exclamation point. Miflash did not work. I tried the same on another pc (windows 7) and Miflash worked. I used the B10 ROM (Android 6). Sorry for my bad English.
Hey sir
I just found an old lumia 525 in my house and I just got curiusd to install android on that. I had followed all the steps correctly. I unlocked the bootloader but when it come to run uefi2lk.cmd . I made a mistake that I did not ( plugged out usb and battery and insert it again ) and I directly click enter by mistakely.
And for that reason my windows phone got bricked. It only vibrating and the screen is not turning on . When I connect it with pc and went to control panel it showing android. By the way my phone have samsung emmc based storage. So if you have any short of trick in 2020 then please help me to resolve this problem.
Thanks you for giving your precious time.
Adi. 19 said:
Hey sir
I just found an old lumia 525 in my house and I just got curiusd to install android on that. I had followed all the steps correctly. I unlocked the bootloader but when it come to run uefi2lk.cmd . I made a mistake that I did not ( plugged out usb and battery and insert it again ) and I directly click enter by mistakely.
And for that reason my windows phone got bricked. It only vibrating and the screen is not turning on . When I connect it with pc and went to control panel it showing android. By the way my phone have samsung emmc based storage. So if you have any short of trick in 2020 then please help me to resolve this problem.
Thanks you for giving your precious time.
Click to expand...
Click to collapse
Hello, I am having same issue. Please let me know if you have got the solution.