Related
Hello Everyone
Since DEVDB is not accepting "Redmi Note 3" I am starting this thread to share all the best ROM's, Tweaks & tricks for the Helios-X10 based Hennessy
All link's & uploads will be posted in this OP once the thread is approved.
0) XIAOMI.EU 7.2.3.0 ROM (Stable & Developer) (no China apps, Rooted, Xposed, Gapps) - THIS IS THE BEST!
1) China ROM - Official (Stable & Developer) UPDATE mode (full of China apps, no Root, no Gapps)
2) China ROM - Official (Stable & Developer) - MIUI 7.1.8.0, SP Flash tools mode (full of China apps, no Root, no Gapps)
3) Global ROM - SphinX v2b ManhIT (MIUI 7.1.3.0 Stable with SwiftKey, SuperSU, GApps & no China apps)
4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
5) sMIUI ROM Kitchen (needs custom Recovery - by Handam000)
6) sCM12.1 Unofficial for RN3
Hacks & Tweaks
1) Fingerprint Sensor fix by Shade5
2) Un-brick your Redmi Note 3 if SPFlashTools failed
3) Restore/Change IMEI number
Coming up...
Tweaking 2G/3G/4G band settings , Battery Tweaks , Rooting, SuperSU, GApps ,Unlocking Bootloader
Enjoy!
Shade5
This will activate the hardware of your Fingerprint sensor if you've flashed the SphinXv2b Stable_Redmi_Note3_MIUI7.1.3.0_Global_ManhIT ROM and found the Fingerprint sensor not working...
All steps are same as you did for flashing the ROM (screenshot & instructions are also in the zip folder)
First download my Fix attached here & unzip it on your desktop
1) Use SP_Flash_Tool_v5.1516.00 (not included - use the same one which you flashed your ROM with)
2) select Download Agent (DA_SWSEC.BIN) in the FLASH TOOL folder
3) find Scatter file (MT6795_Android_scatter.txt) in the IMAGES folder
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
This fix will not affect your apps/data & will immediately ask you to enter your fingerprint - only this time... IT WORKS :good:
IF for any reason you managed to "brick" your phone, just flash the stock China ROM again from the OP or follow the un-brick link for more instructions
Enjoy!
Shade5
Reserved 2
Reserved 3
Hi,
I've just tried the fingerprint solution but unfortunately it still dosn't work. What does your fix actually do? Is there anything else I can try?
Thanks
zms786 said:
Hi,
I've just tried the fingerprint solution but unfortunately it still dosn't work. What does your fix actually do? Is there anything else I can try?
Thanks
Click to expand...
Click to collapse
Hi ZMS...
Firstly just to be sure - did you SPTools flash the SphinX v2b ROM?
After that if you flash my files exactly as per the screenshot I have put in the folder, the Fingerprint sensor driver's get installed.
(BTW on my 16gb the SphinX v2b works but it didn't work on the 32GB, so I made this fix.zip)
I found this ROM was the cleanest n best hence I made this fix (rather than flashing the Chinese or LoXar rom)
Let me know how it goes for you
Hi
I followed your instructions as described and flashed with spflash tool. I will try again and also tried to reboot it but that didn't work. Is there anything else I can check?
That's strange!
Mine (3G/32G) came with SphinX V1 installed and I moved to V2b without any issue.
.I then flashed LoXar 7.1.6.0 on it with SPflashtool (following MIUI EU trend) and live with it now.
No big sensible difference between the two versions, and finger print is working best from the beginning .
Why not to try Loxar and check if issue is solved and in case it will still be present to clean the phone with a China dev version and reapply SphinX as ultimate check.
Edit:
Thanks again to you @ Shade5 for opening this thread
My rn3 bricked
Shade5 said:
This will activate the hardware of your Fingerprint sensor if you've flashed the SphinXv2b Stable_Redmi_Note3_MIUI7.1.3.0_Global_ManhIT ROM and found the Fingerprint sensor not working...
All steps are same as you did for flashing the ROM (screenshot & instructions are also in the zip folder)
First download my Fix attached here & unzip it on your desktop
1) Use SP_Flash_Tool_v5.1516.00 (not included - use the same one which you flashed your ROM with)
2) select Download Agent (DA_SWSEC.BIN) in the FLASH TOOL folder
3) find Scatter file (MT6795_Android_scatter.txt) in the IMAGES folder
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
This fix will not affect your apps/data & will immediately ask you to enter your fingerprint - only this time... IT WORKS :good:
Enjoy!
Shade5
Click to expand...
Click to collapse
i follow this just after i flashed v2b, now my RN3 wont even start, i tried to flash it again with v2b, but the sp tool keeps showing error
PLEASE HELP!!!!!!!!!!!
Shade5 said:
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
Shade5
Click to expand...
Click to collapse
It's important to untick "preloader" too ! When you don't do that, there's a risk, that your device bricks. You always have to do that when you flash non-stock things with SP-Flashtool.
Btw. What's with custom roms for the Redmi Note 3 ? They should be in your first post too...
Is the xposed useful if I install
Sent from my Redmi Note 3 using Tapatalk
if only you said that earlier
Cameo164 said:
It's important to untick "preloader" too ! When you don't do that, there's a risk, that your device bricks. You always have to do that when you flash non-stock things with SP-Flashtool.
Click to expand...
Click to collapse
man, if only you said that earlier... my RN3 now bricked, it wont turn on,.. can you give me a solution ? please..:crying:
can any body please post another link for : 4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
?
Thank you.
Davidfi1 said:
can any body please post another link for : 4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
?
Thank you.
Click to expand...
Click to collapse
Here you have. But what's so bad with registering at the MIUI forum so that you can download it from there?
https://mega.nz/#!jNYylDBJ!ZSmwZALOiucQgQTidEqIrjSnIXtWCu14KpTNf2wjVSY
---------- Post added at 20:14 ---------- Previous post was at 19:30 ----------
isfanl said:
man, if only you said that earlier... my RN3 now bricked, it wont turn on,.. can you give me a solution ? please..:crying:
Click to expand...
Click to collapse
Try to reflash SphinX Rom ( http://en.miui.com/thread-207019-1-1.html ) and pay attention that you untick "preloader". Good Luck. :fingers-crossed:
And when this isn't working, try this method: Use SP Tool V5.1516 for flashing the rom (Untick preloader!!). Instead holding only the Vol Down button, Hold Both Vol Down + Power button when plugging the usb cable in. The progress bar should turn yellow and the flash should be completed. Turn on the device, it will take some time, but it should work.
Cameo164 said:
Here you have. But what's so bad with registering at the MIUI forum so that you can download it from there?
https://mega.nz/#!jNYylDBJ!ZSmwZALOiucQgQTidEqIrjSnIXtWCu14KpTNf2wjVSY
Click to expand...
Click to collapse
I did register at the MIUI forum - the problem is with the mega link is not working here for some reason ....
Thank you.:good:
David.
Does anyone have RN3 like me on that picture..
elol said:
Does anyone have RN3 like me on that picture..
Click to expand...
Click to collapse
I have the 3GB RAM version but I had that MIUI version on my device when I bought it too. It's an unofficial shop version. I would switch to an official MIUI version because your version doesn't get updated. I can recommend the latest developer version 6.1.29.
Cameo164 said:
I have the 3GB RAM version but I had that MIUI version on my device when I bought it too. It's an unofficial shop version. I would switch to an official MIUI version because your version doesn't get updated. I can recommend the latest developer version 6.1.29.
Click to expand...
Click to collapse
How can I flash it?its only use update.zip on sd card or need to use pc or laptop..sory for noob question
zms786 said:
Hi
I followed your instructions as described and flashed with spflash tool. I will try again and also tried to reboot it but that didn't work. Is there anything else I can check?
Click to expand...
Click to collapse
I'd need some info before I can help you out....
1) Is your phone 16 or 32 GB?
2) What was the initial ROM version on it
3) Did you flash the CHINA stable ROM before the SphinX v2b?
lolo9393 said:
That's strange!
Mine (3G/32G) came with SphinX V1 installed and I moved to V2b without any issue.
.I then flashed LoXar 7.1.6.0 on it with SPflashtool (following MIUI EU trend) and live with it now.
No big sensible difference between the two versions, and finger print is working best from the beginning .
Why not to try Loxar and check if issue is solved and in case it will still be present to clean the phone with a China dev version and reapply SphinX as ultimate check.
Edit:
Thanks again to you @ Shade5 for opening this thread
Click to expand...
Click to collapse
Hi @lolo9393 , glad the thread is catching on
Some Redmi's are "pre-flashed" with shop-rom's that have Play store
These versions dont register the fingerprint driver's once flashed
I have both 16GB (China, Stable stock, no Play store) & 32GB(Singapore, stable ROM with Play store) RN3's
My fix only re-flashes these (which you didn't as your stock driver's were still working)
For those who wants to try out the new MIUI 9 Beta/Alpha roms.
These are Chinese rom. so there will be no Gapps and Google services. some Chinese bloatware installed.
if you want the gapps, flash opengapps pico via TWRP.
-----------------------------------------------------------------------
Installation:
1. after flashing from Fastboot you'll have to install TWRP recovery again.
2. before booting into rom, flash SuperSU zip from TWRP (Download from official super su site) and reboot.
3. download http://www.mediafire.com/file/7ryryrgxp1v05bd/Google+Installer_2.0.apk this and install.
4. go to recovery and flash gapps.
5. reboot.
BUILD 27/07/17
Link China Beta: (Flashable Zip)
http://bigota.d.miui.com/7.7.28/miui_HMNote4X_7.7.28_e5b1c02b01_7.0.zip
Link China Alpha: (Flashable Zip)
from now on, I'll update Beta links only.
BUILD 26/07/17
Link China Alpha: (Fastboot Rom)
http://bigota.d.miui.com/7.7.26/mido_alpha_images_7.7.26_20170726.0000.00_7.0_cn_bc1e3192b7.tgz
Link China Beta: (Fastboot Rom)
http://bigota.d.miui.com/7.7.26/mido_images_7.7.26_20170726.0000.00_7.0_cn_9429084240.tgz
Expect bugs!
P.S: Beta will get slower updates with lesser bugs and Alpha will get faster updates with more bugs.
I'll keep updating the links as soon as new builds come out till official release.
(I didn't build this rom, I'm just sharing the goodness)
Did anyone tried the miui 9 beta rom??
Is there any diff faced in stablity or anything??
As far as i hve tested the alpha rom is quite stable and very smooth
Can the op post further alpha updates here?. It would be nice to get alpha updates in one thread
I'll provide you guys with the latest build links as soon as I get my hands on 'em. ?
devilhunter47 said:
Can the op post further alpha updates here?. It would be nice to get alpha updates in one thread
Click to expand...
Click to collapse
I'll keep the thread updated till official release...
How to root ? Just flash SuperSU?
FroZine said:
How to root ? Just flash SuperSU?
Click to expand...
Click to collapse
Yes
Can i flash magisk?
Can someone please extract the official miui 9 themes and post them here?
Beta 9 flashed fine, su fine, viper4audio fine, tried flash xposed-xposedSDK24 by PurifyOS (don't work but it's optionally for me)
BUT i got bigger problem with google play - first tried package that worked on MIUI 8 (don't work), then installed OpenGappsPico (don't work too), tried with this google installer apk shared in first post but i cant install play services - system says "can't downgrade[...]"
System works stable but I faced issues with google apps - many FC's I got, then I switched off FC's in dev settings.
Google play issues may be caused becouse i flashed rom with MiFlash 'save user data' chosen option.
I'll watch if clean install 'll help but don't have free time now.
Greetz, thanks for rom links
KiWi3288 said:
Beta 9 flashed fine, su fine, viper4audio fine, tried flash xposed-xposedSDK24 by PurifyOS (don't work but it's optionally for me)
BUT i got bigger problem with google play - first tried package that worked on MIUI 8 (don't work), then installed OpenGappsPico (don't work too), tried with this google installer apk shared in first post but i cant install play services - system says "can't downgrade[...]"
System works stable but I faced issues with google apps - many FC's I got, then I switched off FC's in dev settings.
Google play issues may be caused becouse i flashed rom with MiFlash 'save user data' chosen option.
I'll watch if clean install 'll help but don't have free time now.
Greetz, thanks for rom links
Click to expand...
Click to collapse
you can't keep data while coming from MIUI8. it will cause issues.
Thanks
Tom riddler thank you very mich it is good rom keep us updated with links i hope you will post regularly
in the next update, I'll add full OTA zip links so that you guys can flash without losing data. and I think I'm gonna keep updating the thread even after official release, cause sometime MIUI team pushes updates to Beta testers first.
Is the alpha rom updated on dialy basis or weekly basis for alpha users??
added new build link.
KiWi3288 said:
Beta 9 flashed fine, su fine, viper4audio fine, tried flash xposed-xposedSDK24 by PurifyOS (don't work but it's optionally for me)
BUT i got bigger problem with google play - first tried package that worked on MIUI 8 (don't work), then installed OpenGappsPico (don't work too), tried with this google installer apk shared in first post but i cant install play services - system says "can't downgrade[...]"
System works stable but I faced issues with google apps - many FC's I got, then I switched off FC's in dev settings.
Google play issues may be caused becouse i flashed rom with MiFlash 'save user data' chosen option.
I'll watch if clean install 'll help but don't have free time now.
Greetz, thanks for rom links
Click to expand...
Click to collapse
Hey man !
I hat this as well ... But I didnt flash any gapps. Miui recovered all my gapps after booting up ! I just uninstall ALL google related stuff via the "system apps" in the settings menu. After this I could install the google installer (see op !) and all went fine
tom_riddler said:
added new build link.
Click to expand...
Click to collapse
have u enrolled for beta testing ??
and i am currently on 7.7.26 alpha rom can i dirty flash 7.7.28(beta) rom over it ?
After clean install play store works without problems i used apk from first post to install services. Thanks
Anyone tried to install custom miui theme ? I got "402" issue. I read I need an theme developer account. Previous used MIUI 8 global beta and all themes worked fine.
Guys flashing this rom will erase internal storage?
XIAOMI.EU MIUI
Xiaomi.eu released their version of MIUI for Mi Max 3.
Weekly Beta and Stable are based on Android 10
Both Weekly Beta and Stable are based on China Rom
Xiaomi.eu forums: here
INFORMATION & FEATURES
So why is this rom important for us?
The answer is very simple, Its a good replacement for a global rom. (the global 9.6.4.0 | 9.6.6.0 has lots of problems and stable MIUI 12 has a lot of ads).
This marks the beggining of Mi Max 3 custom roms development and I hope that we are going to get more roms from the community and developers.
Ill be updating the thread with every new weekly release for Mi Max 3 and with every stable release.
Have a great day and happy flashing
NOTE: Anti Roll-back is now enabled on any MIUI based rom 8.8.17 and above and V9.6.12.0 and above, to read more about it please head -> here
Features of the EU ROM:
Based on China Stable / Weekly builds
Enabled search gesture (swipe up) on the desktop
3way reboot menu (in dev settings)
Dark Mode (Night Mode) for all devices
Removed ads in MIUI system apps
MIUI Dialer and Messages apps
Face Unlock for all devices
Vertical clock widget on lockscreen
Steps counter in Assistant screen
More shortcuts on left lockscreen
Wake up gestures for all devices
AI preloading option in MIUI Lab for all devices
Fullscreen gestures for all devices
Option to auto-expand first notification
Notifications priority settings
More edit options in Gallery app
Enabled MiDrive in File Explorer
Added landscape mode for SMS app
Sunrise/Sunset in the weather app
Google apps support integrated
Removed 5GHz region restrictions
Confirm dials from call logs
Morning report on alarm at morning
More apps supported for AOD notifications
More styles for AOD screen
Raise to wake gesture
AOD notification received animation
Default volume control stream toggle
Tap fingerprint sensor to wake toggle
More Camera features
Double tap to lock screen
Battery AI scenes
Allowed disabling specific system apps
Importing theme .mtz from zhuti.xiaomi.com via ThemeManager
No useless Chinese bloatware apps
More free RAM due to less background processes
Unified flat style app icons for both system and 3rd party apps
Advanced menu with color icons
No any Chinese character under the full system
Mi Video, Mi Music, Mi Browser: No any useless Chinese content
No possibility to re-lock bootloader accidentally with flash any xiaomi.eu release
Added real 27 languages translation made by Official MIUI Fansites and MIUI Fans
Added EU T9 dialer support
Added charging sound switch
Added Screen-OFF animation
Optimized GPS settings for EU
Optimized Battery consumption
Optimized RAM consumption
Added GSMalphabet into SMS app options
Added more icons grid layout 4x5, 4x6, 4x7, 5x5, 5x6, 5x7
SafetyNet passed (Google Pay)
Play Store Certified
Deodexed
Added automated tasks in Security app
Added game speed booster
Added erase module (magic elimination) to Gallery photo edit options
Fixed low volume sound via headphone
Charging screen for all devices
Widevine L1 (for supported devices)
And more, and more made by our 9 years MIUI mods experience.
INSTALLATION & UPDATE
Installation Instructions:
- Make sure your bootloader is unlocked!
- Boot to fastboot mode
- Format your data to make sure that the installation will be clear using the command: fastboot format userdata
- Flash TWRP Recovery (download: here)
- Boot to TWRP recovery
- Mount all the possible partitions
- Wipe your data,cache,Internal storage,dalvik DONT WIPE SYSTEM OR YOU WILL BRICK YOUR DEVICE
- Using MTP or OTG copy the xiaomi.eu rom to your device
- Flash the Xiaomi.eu rom
- Wipe cache and dalvik
- Reboot
Update Instructions:
- Boot to TWRP recovery mode
- Mount all the possible partitions
- Wipe Cache, dalvik
- Using MTP or OTG copy the new rom to your device
- Flash the new rom
- Wipe cache and dalvik
- Reboot
DOWNLOADS
Weekly Beta
NO LONGER UPDATED!
[20.9.3][Android 10]
CHANGELOG
MIUI 12 Android 10
System
Optimization - Optimized system fluency
Gallery
New - Added few new filters on the photo editor
Mail
New - Added mail filters (unread, CC, sent to me)
Health
Optimization - Data sources processing
Optimization - Notification management
Download: here
---------------------------------
Stable
[V12.0.2.0.QEDCNXM][Android 10][WARNING: ARB ENABLED ON THIS VERSION!]
Download: here
PLEASE REPORT ANY BUGS ON THE BUGS SECTION ON THE XIAOMI.EU FORUMS AND NOT HERE!! IM NOT RESPONSIBLE FOR ANY PROBLEMS OR BUGS THAT MIGHT HAPPEN WITH YOUR DEVICE.
ALL THE CREDITS GO TO XIAOMI.EU TEAM
reserved #1
Coming soon: a full guide of how to clean flash the latest MIUI 10 China Beta and from there clean flash xiaomi.eu rom
Screenshots
You can ask for other screenshots in the comments and ill try to add them as well
More screenshots and any thing asked to be uploaded will be in the album: here
reserved #3
Coming Soon: FAQ
Great looking forward to getting off this fake Chinese ROM. Hoping this fixes my issues with calls
I am under this rom for almost 1 week, and I comfirm the bug of the microphone during calls. it's a very recurring bug on miui
darky444 said:
I am under this rom for almost 1 week, and I comfirm the bug of the microphone during calls. it's a very recurring bug on miui
Click to expand...
Click to collapse
report this bug on xiaomi.eu website
what is the bug? can you describe it?
during a call my microphone does not work anymore, so the person can not hear me anymore. It has already been reported ?
Why wipe internal storage before flashing the rom? From what I understand, it's generally not wiped in other devices. and what is the problem with wiping system? its not done anyway by the rom install?
itay457 said:
Why wipe internal storage before flashing the rom? From what I understand, it's generally not wiped in other devices. and what is the problem with wiping system? its not done anyway by the rom install?
Click to expand...
Click to collapse
1. We want to have a clean installation for less problems, wiping internal storage will clear the device from folders and files that were on the previous system.
2. Xiaomi.eu doesnt work like a normal custom rom. it acts like an update to your MIUI which is installed over the previous installation of official MIUI so basiccly it changes the previous system. Wiping system partition before installing the rom will cause a lot of problems later and might not even work.
V8.8.3 was released!
Installed Xiaomi EU on my Mi Max 3 today. Very good so far!
flipp0 said:
Installed Xiaomi EU on my Mi Max 3 today. Very good so far!
Click to expand...
Click to collapse
Have you updated to 8.8.3 yet?
If so can you send us a picture of your about phone (with the android version, security level and more) ?
Also are there any call issues for you? (Microphone not working?)
omer919 said:
Have you updated to 8.8.3 yet?
If so can you send us a picture of your about phone (with the android version, security level and more) ?
Also are there any call issues for you? (Microphone not working?)
Click to expand...
Click to collapse
Not yet. Im on 8.7.26. No microphone issues but I have only made 3 calls.
Do these need to be updated every time or can you skip a few weeks and only update as you feel like it?
Just a quick question. Can I request to unlock bootloader with the vendor rom installed or do I need to flash another rom first? My Mi Max 3 should arrive tomorrow and it will definitely have a multi language global (vendor) rom on it.
Also, can I follow the guide on the first post to flash Xiaomi.eu rom directly over the vendor rom?
Thanks for any info..
Tharg0r said:
Do these need to be updated every time or can you skip a few weeks and only update as you feel like it?
Click to expand...
Click to collapse
You can update when ever you want.
keenan316 said:
Just a quick question. Can I request to unlock bootloader with the vendor rom installed or do I need to flash another rom first? My Mi Max 3 should arrive tomorrow and it will definitely have a multi language global (vendor) rom on it.
Also, can I follow the guide on the first post to flash Xiaomi.eu rom directly over the vendor rom?
Thanks for any info..
Click to expand...
Click to collapse
The bootloader will be unlocked by the vendor so thats not a problem.
I suggest not to install this over the vendor rom as the vendor rom broke some partitions on your device and has an unofficial system partition which will be flashed by Xiaomi.eu rom.
Follow my tutorial: here
you will be on latest china official beta and from there follow my instructions for xiaomi.eu
omer919 said:
The bootloader will be unlocked by the vendor so thats not a problem.
I suggest not to install this over the vendor rom as the vendor rom broke some partitions on your device and has an unofficial system partition which will be flashed by Xiaomi.eu rom.
Follow my tutorial: here
you will be on latest china official beta and from there follow my instructions for xiaomi.eu
Click to expand...
Click to collapse
Thank you so much for the detailed reply, I really appreciate all the information.
Just the confirm, the moment I get the phone I would be able to enter fastboot mode, flash the official chinese rom, then return to fastboot, flash TWRP and from there flash Xiaomi.eu and there will be no 15 day waiting period for the bootloader unlock?
keenan316 said:
Thank you so much for the detailed reply, I really appreciate all the information.
Just the confirm, the moment I get the phone I would be able to enter fastboot mode, flash the official chinese rom, then return to fastboot, flash TWRP and from there flash Xiaomi.eu and there will be no 15 day waiting period for the bootloader unlock?
Click to expand...
Click to collapse
Well I can not be sure about that, but when you get the phone go to developer options and check if your device is unlocked, even if it says its not try flashing twrp it might work.
What is this topic about?
I've spent quite some time writing fixes for GSIs to work properly on our Mi Max 3.
As part of that, we now have a list of easily flashable fully working Mi Max 3 ROMs to pick from.
This topic will be used to keep track of all fully working ROMs and of course to host the latest set of GSI patches / flash templates.
Available ROMs:
These have been tested and confirmed fully working (sans ROM-specific bugs).
AOSiP
Build date: 2019-05-14
Patch date: 2019-05-17
Flashing guide:
Unlock your device's bootloader.
Flash nijel8's modded TWRP recovery.
Pick and download one of the available ROMs.
Reboot into TWRP recovery and flash your ROM of choice.
Go into TWRP's wipe menu and "factory reset" your device (aka. slide the bar).
Flash Gapps (Opengapps / Bitgapps) if your ROM of choice requires / you want it.
Reboot your phone and set it up to your liking.
How can I get my ROM of choice listed here?
Download the TWRP package template from here!
Grab a GSI of your choice and unpack the system image (if it is compressed).
Rename the unpacked system image to system.img and place it inside the system folder inside the template zip file.
Rename the resulting zip file accordingly, flash it, test it, and after you've confirmed everything's working fine, upload and share it.
How do I enable DT2W (double-tap to wake)?
Create a file named "enable_dt2w" (without the quotes) in your device's internal storage.
Reboot your device.
Changelog:
2019-05-17
Changed cpusets to 0-7 (UX gains)
Set rendering thread to schedule as FIFO (UX gains)
Updated AOSiP to its latest (2019-05-14) build
2019-05-10
Swapped firmware & vendor base to stable 10.3.1.0
Updated AOSiP to its latest (2019-05-07) build
2019-05-01
Added two touchscreen-related properties to build.prop
2019-04-30
Updated the kernel to ResurrectedKernel 5.0 (brings a whole bunch of new governors)
Changed default little core governor to alucard
Changed default big core governor to darknessv5
Updated AOSiP to its latest (2019-04-29) build
2019-04-22
Fixed a mistake on my end that made the screen flicker on brightness changes (sorry guys)
Updated the kernel to ResurrectedKernel 4.1 (kcal support!)
Updated AOSiP to its latest (2019-04-22) build
2019-04-21
Fixed the device fingerprint issue (Magisk users should now be CTS-verified by default again)
Added AptX & AptX HD Bluetooth support
Removed DotOS & PixelExperience from the rooster because the WiFi HotSpot function wasn't working properly in them
2019-04-12
Added addon.d support (which means dirty-flashes won't lose their Gapps, Magisk, etc. anymore)
Tested and added Pixel Experience to the roster
2019-04-10
Added ResurrectedKernel (Unlocks 1.8GHz on Little Core / 2.0GHz on Big Core)
Tweaked Governor to utilize ResurrectedKernel's frequency range fully
Updated DotOS bundle to latest build
Repacked all bundles with latest patch
Dropped "Minimal Package" support as its no longer maintainable in tandem with ResurrectedKernel
It ended up with the lags (AOSIP).
I always stuck at unlocked screen, tried AOSIP, Pixel Dust and Pixel Experience, all the same. Any solution to this. Tried from latest xiaomi.eu beta. Thanks
Germano1980 said:
It ended up with the lags (AOSIP).
Click to expand...
Click to collapse
Where's the lag Germano? Works fine for me.
Jesenican said:
I always stuck at unlocked screen, tried AOSIP, Pixel Dust and Pixel Experience, all the same. Any solution to this. Tried from latest xiaomi.eu beta. Thanks
Click to expand...
Click to collapse
Stuck how? If you have "unlock" trouble, as in, your PIN won't let you in, use the "Remove lockscreen" option inside TWRP to remove your previous lockscreen data.
No no, when you reboot your phone there is first MI logo and unlocked sign at bottom. I cant get pass that screen.
MrColdbird said:
Where's the lag Germano? Works fine for me.
Click to expand...
Click to collapse
Before installing their zip, they had some lags in screen transitions and to slide and open apps. Now, everything got more fluid and faster. It was great ... until voLTE is working (and my operator informed me that my device was not compatible with haha).
---------- Post added at 19:14 ---------- Previous post was at 19:07 ----------
Jesenican said:
No no, when you reboot your phone there is first MI logo and unlocked sign at bottom. I cant get pass that screen.
Click to expand...
Click to collapse
What vendor is your device on? Many GSI's only start at a particular vendor (Oreo or Pie).
Jesenican said:
No no, when you reboot your phone there is first MI logo and unlocked sign at bottom. I cant get pass that screen.
Click to expand...
Click to collapse
Make sure the GSI you picked supports Pie vendors.
Not every GSI does... and the ones that are still stuck on Oreo vendors are... troublesome, to say the least.
AOSiP supports pie vendor and so does pixel experience but no luck. If i update recocery, will that help? I really wanna try one gsi if lag is now fixed.
Jesenican said:
I always stuck at unlocked screen, tried AOSIP, Pixel Dust and Pixel Experience, all the same. Any solution to this. Tried from latest xiaomi.eu beta. Thanks
Click to expand...
Click to collapse
The last time I had problems in booting the GSI roms I did the following:
1- I reinstalled the latest global version of Miui Oreo via miflash (Beware of ARB)
2- Logged in the Mi account, enabled the USB debugging and installation by ADB settings to install the TWRP
3- I installed TWRP (nijel8's modded), formatted the data and then installed xiaomi.eu
4- I configured the device and made a backup of xiaomi.eu
5- As I already had the files, I installed AOSIP, without deleting the system, just cleaning the data of xiaomi.eu
6- After the boot, I installed the gapps and magisk.
I never had any problems installing GSI's on my device.
When I was in Miui Oreo, I tested some roms that only boot the Oreo vendor (Bootleggers, PixelDust among others), but I think with the Oreo vendor they spend a little more battery life.
(hope this helps you)
guys, i want to try this but not trigger arb, with .eu or aosp, pixel experience etc.. i'll trigger it?
Masacci0 said:
guys, i want to try this but not trigger arb, with .eu or aosp, pixel experience etc.. i'll trigger it?
Click to expand...
Click to collapse
No ARB on xiaomi.eu as they don't ship firmware into it. No ARB on gsi of course. So no worry about it
Regards
Skyllery said:
No ARB on xiaomi.eu as they don't ship firmware into it. No ARB on gsi of course. So no worry about it
Regards
Click to expand...
Click to collapse
So if i install this rom https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-stable-release.47170/ i'm ok and without arb? I get confused because on the image they say mi max 3 has arb, if they mean the official 10.2 has arb, why even put the image in the .eu version? It just confuses people.
So i go with this rom reach setup screen, recovery and install the gsi rom?
Jesenican said:
AOSiP supports pie vendor and so does pixel experience but no luck. If i update recocery, will that help? I really wanna try one gsi if lag is now fixed.
Click to expand...
Click to collapse
Try the xiaomi.eu versions from last month based on installing AOSiP. Today I tried with the versions of this month and did not boot.
I am having the exact same issue. I followed the guide and installed the latest xiaomi.eu 9.3.7 beta and boot no problem then i flash gsi .img and it gets stuck at MI Logo and wont go any further. I have tried latest xiaomi.eu beta, stable, last months, month before that. All xiaomi.eu boot fine without issue but as soon as I flash any gsi .img it gets stuck at MI Logo screen? Am I doing something wrong?
Also the gsi i am using is latest pixel experience arm64 A only.
Any help would be greatly appreciated.
Same. I tried 3 different GSI roms and kept being stuck on the mi logo... :'(
only aosp gsi works, still getting android.process.media and bluetooth crashes
Edit: instead of com.android.media it was android.process.media
I tried installing Descendant_TwoDotOne. It stuck on the mi logo when pairing it with xiaomi.eu 9.3.7 & 9.3.1. It works perfectly when paired with xiaomi.eu 9.2.21 (or earlier version should work). I guess there may be some changes made to the 9.3 version vendor content leading to this problem.
jngiag said:
I tried installing Descendant_TwoDotOne. It stuck on the mi logo when pairing it with xiaomi.eu 9.3.7 & 9.3.1. It works perfectly when paired with xiaomi.eu 9.2.21 (or earlier version should work). I guess there may be some changes made to the 9.3 version vendor content leading to this problem.
Click to expand...
Click to collapse
You're my hero! That did the trick. ;D
So can i normaly flash older xiaomi.eu version without fear of ARB?
OP post updated with a new package.
Changelog:
Tweaked the governor to boost properly and use the 1.6 / 1.8GHz maximum little / big frequencies. (Everything's even smoother now~)
Xiaomi.EU 21.1.10 Android 10 Ported by Rashid Malyk
Device: Redmi 5 Plus
🗓 Build Date: 10/01/21
Build version: 21.1.10
MIUI version: 12.5
Android Version: 10.0 Q
🖥 Developed by: t.me/rashidmalyk
What's Working?
RIL
WiFi
Hotspot
Bluetooth
Stock Mi Radio
MI Sound Enhancer
MiCamera
Vibration
LED (offline charging LED)
CTS passed with Magisk
Auto Brightness
XiaomiParts and Tweaks
Goodix and FPC Fingerprint
and all MIUI features..!
Changes log:
1. Most important; the apps opening delay is finally fixed
2. The system ui and system apps opening delay is also fixed
3. Improved ram management
4. I can feel it, it would be smoothest build ever
5. You guys already know the changes of MIUI 12.5
6. Messaging app is so smooth now
Rest things are the same like previous ports
Bugs:
Switching FM to speaker isn't working, on headphone MI Radio is working
How to Install?
1. Unlock Bootloader
2. Install OrangeFox R11 Recovery
3. Wipe Cache, System, Vendor, Data Partitions (format internal storage is not necessary)
4. Flash ROM zip and Reboot to System
5. Magisk v20.3 and v21 are compatible (optional)
Donate me a Coffee
Paypal: https://paypal.me/rashidmalyk
Skrill: [email protected]
Download Link: (mirror links are also available, check YouTube video's description)
vince MIUI 12.5 Xiaomi.EU Q ROM by @RashidMalyk.zip
drive.google.com
ROM Review:
Note: You can join discussion group at Telegram t.me/vincePYA, for any query leave comment here and/or YouTube comments section or follow me at Telegram t.me/rashidmalyk
whats the fps on ppsspp tekken 6 running on default settings pleas share ill try it if its stable
ROM works very smooth. Fond no bugs so far.
foxmonter said:
ROM works very smooth. Fond no bugs so far.
Click to expand...
Click to collapse
Try playing any games or emulator like citra or ppsspp like tekken 6
samsungics1200 said:
Try playing any games or emulator like citra or ppsspp like tekken 6
Click to expand...
Click to collapse
Sorry i dont play games... is for work only...
HEY ! is best miui12 rom so far....
Thanks Rashid for your continuous efforts for keeping our device alive.
I'm on orangefox 10.0 stable, which recovery is recommended, because i have backups that i might need to restore in case something goes wrong and might want to revert to a working backup?
I'm using stock xiaomi.eu 10 stable. A8.1
Also which magisk version should we use?
Flashing procedure and / or prerequisites are missing from op..
Bi0haZarD said:
Thanks Rashid for your continuous efforts for keeping our device alive.
I'm on orangefox 10.0 stable, which recovery is recommended, because i have backups that i might need to restore in case something goes wrong and might want to revert to a working backup?
I'm using stock xiaomi.eu 10 stable. A8.1
Also which magisk version should we use?
Flashing procedure and / or prerequisites are missing from op..
Click to expand...
Click to collapse
Updated op now..! thanks
rashidmalyk said:
Updated op now..! thanks
Click to expand...
Click to collapse
Excellent work as always Rashid!!
I will find some time after work today, do the necessary preparations/backups and provide feedback on your marvelous work.
Your dedication and love for your work will pay off, I wish all the best for you and your family.
Best regards, and wish you a wonderful day
Hi,
It works like a charm!
Just a little issue for the wifi (Wifi disappears after the first connection) , i had to reset wifi settings to fix it.
Thank you very much rashidmalyk
Takezo90o said:
Hi,
It works like a charm!
Just a little issue for the wifi (Wifi disappears after the first connection) , i had to reset wifi settings to fix it.
Thank you very much rashidmalyk
Click to expand...
Click to collapse
The bug with the wifi is not a bug, it is caused by any router. Each time miui 12 connects to your router or any other router, changes the mac address of your wifi adapter for privacy reasons. You can set it to device default to avoid this issue.
Bi0haZarD
Great to know!
Takezo90o said:
Bi0haZarD
Great to know!
Click to expand...
Click to collapse
Glad to have helped! Enjoy
the quick setting to turn on the led flash by pressing the power button twice does not work.
Nice rom !!!
Nice miui 12 rom. I'm having some problems charging my phone, they are very slow. I came from Miui 11 stock using original xiaomi charger. With ampere open they barely hit 500mA but if I change to recovery mode they charge normally. Thank you for you time the rom is smooth!!
bro can you please guide me how to enable carrier video calling
i tried to edit with build prop but can't do it
even i disabled cam2 api
please help me
rashidmalyk said:
Xiaomi.EU 21.1.10 Android 10 Ported by Rashid Malyk
Device: Redmi 5 Plus
🗓 Build Date: 10/01/21
Build version: 21.1.10
MIUI version: 12.5
Android Version: 10.0 Q
🖥 Developed by: t.me/rashidmalyk
What's Working?
RIL
WiFi
Hotspot
Bluetooth
Stock Mi Radio
MI Sound Enhancer
MiCamera
Vibration
LED (offline charging LED)
CTS passed with Magisk
Auto Brightness
XiaomiParts and Tweaks
Goodix and FPC Fingerprint
and all MIUI features..!
Changes log:
1. Most important; the apps opening delay is finally fixed
2. The system ui and system apps opening delay is also fixed
3. Improved ram management
4. I can feel it, it would be smoothest build ever
5. You guys already know the changes of MIUI 12.5
6. Messaging app is so smooth now
Rest things are the same like previous ports
Bugs:
Switching FM to speaker isn't working, on headphone MI Radio is working
How to Install?
1. Unlock Bootloader
2. Install OrangeFox R11 Recovery
3. Wipe Cache, System, Vendor, Data Partitions (format internal storage is not necessary)
4. Flash ROM zip and Reboot to System
5. Magisk v20.3 and v21 are compatible (optional)
Donate me a Coffee
Paypal: https://paypal.me/rashidmalyk
Skrill: [email protected]
Download Link: (mirror links are also available, check YouTube video's description)
vince MIUI 12.5 Xiaomi.EU Q ROM by @RashidMalyk.zip
drive.google.com
ROM Review:
Note: You can join discussion group at Telegram t.me/vincePYA, for any query leave comment here and/or YouTube comments section or follow me at Telegram t.me/rashidmalyk
Click to expand...
Click to collapse
Hi Rashid,
Just flashed this rom with twrp 3.2 and procedure was completed as butter. But turned on phone, showing miui and said data is corrupted format phone. Idk its because of twrp or anything else. But it happened thrice today. Can you please help? Tried orangefox but even after typing correct password it's not decrypting my data. Hope you'll be able to help.
Regards
Ehsanur Rahman said:
Hi Rashid,
Just flashed this rom with twrp 3.2 and procedure was completed as butter. But turned on phone, showing miui and said data is corrupted format phone. Idk its because of twrp or anything else. But it happened thrice today. Can you please help? Tried orangefox but even after typing correct password it's not decrypting my data. Hope you'll be able to help.
Regards
Click to expand...
Click to collapse
Use orangefox 10.1 stable for encryption / decryption, orangefox 11 beta has bug with encryption / decryption.
If you can't decrypt with orangefox 10.1, you can FORMAT (not WIPE) internal memory to remove encryption.
And don't forget to BACKUP your important data.
Hi sir I am a problem with this rom
I can't copy 2 or 3 file from internal storage to otg flash my phone is hanging or speed copy is 0% freeze
And next problem in the WhatsApp not show my contact name just number show
Plz help me sir rashid dear.tanx
hello, and thanks for the job. I have a (bad) question: I read that it is advisable to use orange fox R11, can we use TWRP? (sorry for the bad english, i'm french speaking and use a translator) thank you in advance.
Olly706 said:
hello, and thanks for the job. I have a (bad) question: I read that it is advisable to use orange fox R11, can we use TWRP? (sorry for the bad english, i'm french speaking and use a translator) thank you in advance.
Click to expand...
Click to collapse
Better use Orangefox 10.1 stable. It is based off TWRP and doesn't have the issues the original TWRP had with Redmi 5 plus.
Orangefox 11 is beta and has bug with encryption / decryption..