Database Users

[q] help: Mms, internet, nav, on flashed evo

OK, I bought a Evo Flashed to Metro PCS from someone. I simply did *228 and was able to activate the phone. When you activate like this, you wont get MMS and Internet working, just talk and text. Can i get this working myself? IF so what steps do I take?

wow thanks for the help

Metro pcs flashing hope this helps
rwalkerfla said:
OK, I bought a Evo Flashed to Metro PCS from someone. I simply did *228 and was able to activate the phone. When you activate like this, you wont get MMS and Internet working, just talk and text. Can i get this working myself? IF so what steps do I take?
Click to expand...
Click to collapse
1. Make sure you have all the drivers need for the phone.
USB Drivers Download
USB Drivers for rooting
DIAG Driver Download
64bit drivers
32bit drivers
2. Make sure your phone is rooted
2.3.3 root click here
revolutionary.io
Please make sure to insert the beta key at it before installing it.
Beta key will appear once you click the download button.
2.2 root click here
3. Once successfully rooted next step is to download the software needed. I will add links as they are needed.
4. Ok before this flashing process starts you have to get call and text on your phone. One way is to go to a corporate metro store and second one you know those who need second way.
5. Assuming that you have your phone rooted you need to download this rom and then copy it to root of your sdcard.
Download Custom MetroPCS ROM here
6. Install above rom from recovery. To get to recovery mode turn off your evo. Press and hold the volume down key and press the power key. From the hboot menu using volume key goto recovery and press the power key. You should be in recovery menu. click wipe data and also click wipe cache. Click install zip from sdcard and look for file you copied to sdcard.
After installation is done reboot the phone, first boot will take longer time.
Download and install this app MslReader. Easy way is to copy it to sdcard and then using astro file manager install it.
Once installed open the app on your phone and read your MSL Code.
7. Install QPST (Click here to download) and install it.
Follow it to get the internet fixed
1. Go to your phones dialer and dial ##3424#
2. Plug in your phone to the computer
3. Go To Device Manager and there should be a unknown device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Right Click on The unknown device and Click on Update Driver Software
5. Click on the 2nd Option
6. Browse to the folder where you downloaded the drivers
7. Let It Install
8. Once It Installs, depending If Your system is 32 Bit Windows xp through 7 or Windows Vista or 7 64 Bit the place where you'll see the port will be different.
For 32 Bit, In Device Manager Check under communication Port and you'll see
the port for your device
For 64 bit, In Device Manager check under Modems and right click on the HTC Modem and go to properties. Go to the modem tab and you'll see your port there
1. Now Open Up QPST Configuration
2. Click On Add New Port
3. Uncheck the box that says Show Serial etc etc
4. This is what it should look like after you add port
5. Go To Start Clients and click on Service Programming
6. This will pop up just hit ok
7. This Is the next window that will come up
8. Click on Read from Phone and enter your SPC Code (This was the code found in the MSL Reader app, usually its 000000)
9. Once it reads the contents from your phone, there will be a check box on the right side that says SPC Change Available. Check the box and change your the area that says Service Programing to 6 Zero's. Don't hit write just yet
10. Go to roam tab click browse and choose metro prl.
11. Go To the Display Tab and Change It To MetroPCS
12. Go To The M.I.P. Tab and copy the settings in my picture and be sure to set it to SIMPLE IP! Right now its set to MOB+Simple IP on stock HTC Phones
13. Now Click on the profile 0 and hit edit
Copy all the settings that are displayed in my picture. In NAI and Tethered NAI type (Your10DigitPhone#)@mymetropcs.com. In HA Shared Secret and AAA Shared Secret click on enter text string and type "metropcs" without the quotes in lowercase.
14. Now do the exact same thing for Profile 1.
15. Go To the PPP Config Tab Now and copy all the settings displayed in the Screenshots
16. Still while in the PPP Config Tab go to UM Section and copy the settings exactly
Now for Tethered Nai and User ID type in your
(your10digitPhone#)@mymetropcs.com
For you password go to this website and type in your MEID or ESN in the box labeled "Calculate." Once you calculate your password(it will be called MetroPCS MSL) enter into your password box. You may find this on the top of QPST Service programming window. If you look at the pictures its the numbers located on top that are blurred out.
17. One You Have finished in the UM Section of the PPP Config tab go to the AN Tab copy the setting listed in the Screenshot.
This Time you cant enter anything in the tethered nai but in USER ID enter once again (your10digitphone#)@mymetropcs.com and the same MSL password you used before in the last tab.
18. One Finished Hit Write to Phone. Your phone will reboot after its done. If You Get an Error don't worry just ignore it and reboot your phone.

Bypass Setup Wizard SGS4

For those of you who have an error completing the setup wizard, this is how I bypassed it.
1. From the wizard, on the Samsung account screen, select sign up for new Samsung account
2. Select log in with Facebook - which launches a browser
3. On that page click and hold a word to select it
4. Scroll to the right to do a web search
5. Select Chrome
6. Navigate to facebook.com
7. Click the link to download the app which launches the Play Store
8. In Play Store download Nova launcher and then launch
9. From here you can enable developer options and USB debugging
10. Root again and reboot
11.From here, you can use your ADB skills to rename/remove the SetupWizard.apk and SecSetupWizard2013.apk files from /system/app, or as I did, repeat the steps 1-7, install Root Explorer and alter the files that way.
12.Reboot
I hope this helps until we can install a custom recovery and flash ROMs.
Thanks to RandomHandle for helping me repeat the process to verify it worked, as well as clean up the instructions!

I followed all of the steps but for some reason I can't rename or delete the setup files. I re-rooted and even installed root checker to make sure I had root access but it's not letting me touch them.

Did you mount as R/W ?
I am able to rename those files with Root Explorer.

pakxelaos said:
Did you mount as R/W ?
I am able to rename those files with Root Explorer.
Click to expand...
Click to collapse
Ah, yes... That was it. Thank you so much.

I am still getting boxes popping up occasionally saying that text-to-speech has stopped. Other than that the phone is working good. Thanks again for finding this clever fix.

wtd966 said:
For those of you who have an error completing the setup wizard, this is how I bypassed it.
1. From the wizard, on the Samsung account screen, select sign up for new Samsung account
2. Select log in with Facebook - which launches a browser
3. On that page click and hold a word to select it
4. Scroll to the right to do a web search
5. Select Chrome
6. Navigate to facebook.com
7. Click the link to download the app which launches the Play Store
8. In Play Store download Nova launcher and then launch
9. From here you can enable developer options and USB debugging
10. Root again and reboot
11.From here, you can use your ADB skills to rename/remove the SetupWizard.apk and SecSetupWizard2013.apk files, or as I did, repeat the steps 1-7, install Root Explorer and alter the files that way.
12.Reboot
I hope this helps until we can install a custom recovery and flash ROMs.
Thanks to RandomHandle for helping me repeat the process to verify it worked, as well as clean up the instructions!
Click to expand...
Click to collapse
Thank you very much

ethem11 said:
Thank you very much
Click to expand...
Click to collapse
wtd966 said:
For those of you who have an error completing the setup wizard, this is how I bypassed it.
1. From the wizard, on the Samsung account screen, select sign up for new Samsung account
2. Select log in with Facebook - which launches a browser
3. On that page click and hold a word to select it
4. Scroll to the right to do a web search
5. Select Chrome
6. Navigate to facebook.com
7. Click the link to download the app which launches the Play Store
8. In Play Store download Nova launcher and then launch
9. From here you can enable developer options and USB debugging
10. Root again and reboot
11.From here, you can use your ADB skills to rename/remove the SetupWizard.apk and SecSetupWizard2013.apk files, or as I did, repeat the steps 1-7, install Root Explorer and alter the files that way.
12.Reboot
I hope this helps until we can install a custom recovery and flash ROMs.
Thanks to RandomHandle for helping me repeat the process to verify it worked, as well as clean up the instructions!
Click to expand...
Click to collapse
I don't have the Samsung account screen. I had uninstall alot of Samsung stuff with Titanium, so I don't know if that is the reason. I did do a factory reset from the recovery screen but I still don't see where it says sign up for Samsung on setup...

gsessons said:
I don't have the Samsung account screen. I had uninstall alot of Samsung stuff with Titanium, so I don't know if that is the reason. I did do a factory reset from the recovery screen but I still don't see where it says sign up for Samsung on setup...
Click to expand...
Click to collapse
When you do the factory reset, do you get the setup wizard on the first boot? The Samsung account login is a few pages in after the personal information.

wtd966 said:
When you do the factory reset, do you get the setup wizard on the first boot? The Samsung account login is a few pages in after the personal information.
Click to expand...
Click to collapse
When I get home I will tell you everything I see on phone.... Off top of head... Yes I do get the setup wizard but I do not see where it say Samsung account.
EDIT******** this is what im getting....no samsung sign up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Yeah unfortunately that is the only way to get into the browser to be able to get out of the wizard. Looks like you need to wait for the official firmware release.

hey
i dont see SetupWizard.apk in my phone where i can find it and remove that damn thing!

huang1231991 said:
i dont see SetupWizard.apk in my phone where i can find it and remove that damn thing!
Click to expand...
Click to collapse
/system/app

CM 11S 05Q OTA Zip

OnePlus One CM 11S 05Q
DOWNLOAD NOW
The ZIP file for the update can be downloaded from this URL. You should be able to apply it in recovery as long as you're stock.
Please join all the spaces as I cannot post outside links:
builds .cyngn .com /fota /incremental /bacon /cm-bacon-5fa8c79c0b-to-5229c4ef56-signed.zip
Steps to Install
1. If Developer Options is not enabled, go to Settings--> About Phone and Tap build 6-7 times. Go back to Settings to see the Developer Options Menu.
2. Select Advance Reboot from Developer Options.
3. Copy the downloaded OTA file to internal memory.
4. Reboot your phone to "Recovery"
5. Select the option to Apply Update--> From Internal Memory--> select the OTA file you have downloaded.
6. Select Install/Yes and wait for 4-5 minutes.
7. Once the phone has rebooted, please do reboot once again to optimise the cache.
8. Thats it you are ready to go.!!!
David S. From OnePlus Says "Today the latest OTA CM 11S release, 05Q, will start rolling out to our users. This one is packed with new features and fixes to some known issues. With this update you will see that there are improvements to BlueDroid, an updated configuration for NFC, updated media codecs (as well as enabled WMA DSP and AAC codecs), and a few security fixes. Furthermore, SwiftKey and MaxxAudio by Waves, which have always been a OnePlus staffer favorites when it comes to keyboards and sound performance, are now an integrated to the OnePlus experience with this update.
As we continue to improve the camera on the One, there are now three video focus options: auto, continuous, and infinity. Other things that were added include regulatory information, audio output latency optimization, LED overlays, and an ANT+ library. We also removed some features, such as unused key layouts, references to non-existent ringtones, unused strings in CMAccount, and the option for a silent alarm ringtone. Translations have also been improved in Apollo, CMAccount, and the system in general."
List of changes:
Recovery:
Fixed dab with Linux 3.10
Improved ADB Sideload
Improved wipe confirmation screen layout
Improved progress bar
General:
Fixed wrong emergency call property
Improved audio policy flexibility
Increased void volume
Improved light controls
Updated WCNSS configuration
Upgraded ADCB Files
Powered HAL improvements
Upgraded SQLite to version 3.8.6
Reduced volume increment/decrement step per click
Added support for Query SIM SMS capacity
Upgraded TP firmware to 14001220
Fixed headset insert/remove crash
Fixed ability to hang up a call from a wired audio headset
Set Up:
SetupWizard: Allow turning on mobile data if off by default
FileManager:
Fixed force close when sharing multiple files over Bluetooth
FOTA:
Displays download size as a decimal prefix
Enabled scrolling on the system update screen
Added Download clicked notification
Shows download size on UI
Updated Icons
Added progress bar
CameraNext:
Added letterbox view for to show actual capture in preview
Added toast information to aid in first time use of Continuous shot
GalleryNext:
Additional supported video types
Dialer:
Blacklist, strip extension from number
Fixed screen rotation behavior during call
Clock:
Call events can be handled on alarm
Fixed city and time zone entries

http://builds.cyngn.com/fota/incremental/bacon/cm-bacon-5fa8c79c0b-to-5229c4ef56-signed.zip there you go

Just flashed the OTA with no issues. Let's see how it performs compared to 44S, specially the radio.

TWRP tells me that gps.conf was changed and update failed. Always something.

What folder in the internal memory should I use?

Please advice
I am on 44S... I have rooted the device and having teamwin recovery...... Can I simply flash this OTA.zip???

TWRP
Doesnt flash with twrp for some reason.. gives an error with updater binary!

If I'm already using SwiftKey should I uninstall it before update?
sent using Tapatalk

When?
When will the stock rooted 05Q ROM be released like it was released for 44S from Calkulin ?

did u manage to flash it? im rooted and twerp too and dno how to

i am stock and unrooted, will i wipe everything if i flash it?

aspico said:
i am stock and unrooted, will i wipe everything if i flash it?
Click to expand...
Click to collapse
i think if u wipe it it will get wiped
if u just flash on top of it u should be fine

For Indian users :
1. Download this cm-11.0-XNPH44S-bacon-signed-fastboot .
2. extract the zip and run the following 'fastboot flash boot boot.img' and 'fastboot flash system sytem,.img'.
3. Download OTA-UPDATE-05Q and transfer to phone.
4. Reboot phone to recovery i.e. hold power and vol down until you reach the oneplus logo.
5. Select the option to Apply Update--> From Internal Memory--> select the OTA file you have downloaded or you can do adb sideload.
6. Select Install/Yes and wait for 4-5 minutes.
7. Once the phone has rebooted, please do reboot once again to optimise the cache.
8. Thats it you are ready to go.!!!

Honestly there are about 4 other threads open with the OTA update and instructions on how to flash. Every single question on page 1&2 has been asked in nauseum throughout xda guys.. For crying out loud search it won't kill ya.
Its an OTA of course it won't wipe everything has any OTA ever wiped out your whole system
How can you get an answer to when stock rooted will be done when the guy that does it don't know. When it's ready its ready that simple
You need a complete stock OS with no changes to any SYSTEM files to be able to successfully flash OTA or else it will fail in recovery TWRP or any of them.
Lastly OP why post a zip when you know you have not reached your limit. If people are too lazy to search for answers the extra steps you created definitely will only cause extra issues. Thx for your contribution though

*Facepalm
Flash it like a regular Rom. Zip file through custom recovery.
WARNING: PEOPLE ARE HAVING ISSUES AND GETTING ERRORS IF THEY PREVIOUSLY INSTALLED EXPOSED FRAMEWORK AND TAMPERED WITH THE FRAMEWORK SETTINGS. THEN DON'T FOLLOW THESE STEPS!! ONLY PEOPLE WHO HAD A COMPLETE STOCK, UNLOCK BOOTLOADER, ROOT, CUSTOM RECOVERY SHOULD BE FINE!!
*these are the steps I did and I'm running everything fine on my end*
..On Stock 44s Build..
If already unlock bootloader, root, custom recovery..
-download the zip file
-place it in the internal storage
-(if you want root *download the latest supersu.zip file) other wise you will have no root! Place that in the internal storage as well
-boot into recovery (I'm using the latest twrp recovery)
- MUST WIPE FACTORY DATA RESET, WIPE DATA & CASHE!!
-flash rom
-flash supersu
-reboot and you should be on the new ota with root

Flashed over stock without a problem.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sent using Tapatalk

Aniket.t20 said:
Doesnt flash with twrp for some reason.. gives an error with updater binary!
Click to expand...
Click to collapse
I had same issue as md5 verification was checked by default and its was failing because of that. When you uncheck and flash it works fine.

Please do not create duplicate threads. A thread with the same topic already exists. It can be found here.

[ROM] FlymeOs beta for Sony Xperia Z3 Compact

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was surfing the web about z3c, so I found this rom.
it is android 5.1.1
Bulid number Flyme 5.1.10.9R beta.
enjoy it
Download
source
Regarding

For LB or UB??

Myo Thu Htet said:
For LB or UB??
Click to expand...
Click to collapse
Unlocked.
ialazmi said:
I was surfing the web about z3c, so I found this rom.
it is android 5.1.1
Bulid number Flyme 5.1.10.9R beta.
enjoy it
Click to expand...
Click to collapse
Please correct the download link, your link downloaded 5.1.7.18 R-beta.
Download

Fisheye bug, some chinese stuff v5.1.1. I don't trust it.

vooR9er said:
Unlocked.
Please correct the download link, your link downloaded 5.1.7.18 R-beta.
Download
Click to expand...
Click to collapse
niga, tell us work or doesnt work...i must learn chinesse to use this rom or not? doesnt care about version of rom...

op3n said:
niga, tell us work or doesnt work...i must learn chinesse to use this rom or not? doesnt care about version of rom...
Click to expand...
Click to collapse
niga??? You do not mistake or may be lost?
In General, I tried to install flyme rom with gapps and without gapps, error 7, 20. Did a wipe (data, dalvik, cache, system) flashed again the error, I decided to reboot. A miracle happens, the phone boots into CWM-based Recovery and now all sewn up. When you first start (setup) for a long time hung about 8-10 minutes on the splash screen flyme. So You'll have to try.

I have flashed form stock rom to flymeos using latest twrp recovery but you should wipe all except internal SD?
Sent from my D5803 using XDA-Developers Legacy app

Maybe someone wants to try. Flyme 6.7.6.30R бета
I myself have not tried it, so I can not say anything.
Description taken from the Chinese site.
Need to unlock
Based on official firmware 6.0.1 final version, the card can be directly brush! (7.1 users need to check the clear data packet strong brush over the bottom 6.0)
Fixed error problem pops up repeatedly input method
fixes some procedural error press the issue of
Fixed call recording files can not be played properly
dual card Z3 after brushing rom package boot into the system to restart normal patch can be painted into the Internet Internet
The official update log (for reference only)
Communications
repair: No SIM card contacts entry issue
lock screen
repair: there is a problem the bottom bar lock screen
Communities
repair: Flyme community Comment edit box is the bottom bar and keyboard occlusion
application
update: All system applications to the latest official version
System
repair: add a node can not play audio files in question
FIX: Multi-task basis having twice the home button to return to the desktop problems
repair: + headphone volume remote control music volume can only be increased to 30% of the problem position
fix: the easy mode can not exit into the problem of
restoration: Click to download mobile data services, upgrade error problems
other
synchronization: Flyme 6 latest adaptation of code
ROM to flash tutorial
Download Brush Pack copied to the built-in memory and external SD card
Manually restart the phone, press it down on the volume button to enter Recovery
TWRP mode
Manually restart the phone, press the volume down key look under to enter Recovery
We have three clear steps:
1 Click: wipe
Hit points: Swpipe to Factory Reset the arrow points to the left to pull to the right
2 hit points: the return key
Hit points: the return key return to Home
Brush steps:
Click: install
Click: Large Aage: sdcard
Built-in SD Click: sdcard
External SD Click: external_sd
Hit points: XXXXXX.zip
Select: Next
Swipe to Confirm Flash arrow points to the left to pull to the right
Click: Reboot System (restart)
carry out

This version Flyme 6.7.6.30R Beta. Have any bugs, as SD card recognition. When open build.prop force close (Root Explorer, Mixplorer, MT...)
But the UI is nice. Battery drain is fast or normal.
Step by step is : Flash prerooted firmware 6.0.1
> Flash Flyme 6 > do a wipe factory reset> reboot normally
Boot have 8~10 min.
---------- Post added at 03:07 PM ---------- Previous post was at 03:00 PM ----------
flyme 5 is beautiful. Have a fish eye bug at camera. And frontal camera is more bugged.

Any idea where to locate the ispbooot.bin file for this wireless AA/Carplay display screen?

I have been trying to fix a Bluetooth issue on this unit I bought about a year ago and I chased this down the rabbit hole to locate a isobooot.bin for what looked like an identical Device under a brand name. I installed it but it's a different resolution and touch screen no longer works. Anyone have experience with these units? I'm also interested in the firmware for the newer 5" AA motorcycle display that seems to fix this BT issue. Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Update. I have located a compatible file under the Brand Name Maxca on FB and I have recovered this device. I would still like to learn more about mods and regular firmware updates. Thanks.

toolboxjesse said:
Update. I have located a compatible file under the Brand Name Maxca on FB and I have recovered this device. I would still like to learn more about mods and regular firmware updates. Thanks.
Click to expand...
Click to collapse
Hi Can you provide the file? I'm unable to find it on FB.. I have the same unit and there is no option for a Boot Logo change (Wich I really need). Thanks for the help. G.

Guido Carenza said:
Hi Can you provide the file? I'm unable to find it on FB.. I have the same unit and there is no option for a Boot Logo change (Wich I really need). Thanks for the help. G.
Click to expand...
Click to collapse
Dear Buyers,
We have a new update for Xplay here is download link the lastest update firmware Jul 2022:
https://1 drv. you may follow this intruction video to do the upgrade
Tools needed
1, USB flash driver (FAT 32) Upgrade instructions: 1, Put "ISPBOO0T.bin" file into USB driver root directory 2, Plug USB driver into Xplay USB port 3, Use a stick to push and hole the Reset button on the back (you can hear click sound when you pust Reset button)
4, Connect the power cable, loose the Reset button after 3 seconds 5, Upgrade finishes in 1 minute, then you will see" Upgrade finished, Welcome", Reboot the Xplay 6, Xplay 2 needs touch screen calibration after upgrade, simply reconnect USB disk as the video instruction then reboot the system again.

toolboxjesse said:
Dear Buyers,
We have a new update for Xplay here is download link the lastest update firmware Jul 2022:
https://1 drv. you may follow this intruction video to do the upgrade
Tools needed
1, USB flash driver (FAT 32) Upgrade instructions: 1, Put "ISPBOO0T.bin" file into USB driver root directory 2, Plug USB driver into Xplay USB port 3, Use a stick to push and hole the Reset button on the back (you can hear click sound when you pust Reset button)
4, Connect the power cable, loose the Reset button after 3 seconds 5, Upgrade finishes in 1 minute, then you will see" Upgrade finished, Welcome", Reboot the Xplay 6, Xplay 2 needs touch screen calibration after upgrade, simply reconnect USB disk as the video instruction then reboot the system again.
Click to expand...
Click to collapse
OneDrive
onedrive.live.com

toolboxjesse said:
OneDrive
onedrive.live.com
Click to expand...
Click to collapse
At this moment I have the August 2022 update, but thereis no option for change the boot logo and the UI of the home screen is different (in a bad way) then the advertised image, which havee big tiles...

Then we're basically looking for the same latest version - I only know about the Aug 22 version

So some info, I bought a "Carsara" branded one.
I was disapponted for 2 particolar reason, this is why I'm here.
1. the UI in the selling page was way more minimal and easy to use (mine was like a 1990 headunit)
2. there was no option to change the boot logo
Well, they send me and old firmware (Of another brand, ""Maxca"" ,wich I think it's the main producer of this devices) with the Old UI, it's fantastic, but the Android Auto Wireless it's not working anymore.
In this old firmware you can edit the boot logo with a lot of car brand.
Cerry on top if you whant to customize the boot spash screen with one created from you, create a "logo.jpg" image, resolution 1024x600 and"put it in the same USB where you put the ISPBOO0T.bin file. After two reboot you will see your logo on the boot up. NICE!!!!
On some of the latest firmware you only have to boot up the device and connect the usb with the "logo.jpg" inside, the device will do the rest. Reboot and engoy.
For who whants to try the old firmware with the WAY COOLER UI here is the link:
https://drive.google.com/drive/fold...onversation.0.0.1bc53e5fLQyHZL&usp=share_link
Basically I'm unable to have the OLD UI with a working Wireless Android Auto. It's very sad, the unit is nice.

toolboxjesse said:
Then we're basically looking for the same latest version - I only know about the Aug 22 version
Click to expand...
Click to collapse
Can you post a photo of the unit you have and what home UI you have now?

The unit I have is the exact unit in the original post (although the outlets are on the left side, not the right side).
I will have to try to remember to photograph the UI tonight when I am home. Regarding the boot logo- in the Engineer menu (or whatever it's called, pin 123456) there is an option to change the boot logo with several brand logos. I have read that if you great an image of the correct resolution and extension and place it on an SD card it might show up as an option on that screen.

toolboxjesse said:
The unit I have is the exact unit in the original post (although the outlets are on the left side, not the right side).
I will have to try to remember to photograph the UI tonight when I am home. Regarding the boot logo- in the Engineer menu (or whatever it's called, pin 123456) there is an option to change the boot logo with several brand logos. I have read that if you great an image of the correct resolution and extension and place it on an SD card it might show up as an option on that screen.
Click to expand...
Click to collapse
Correct and it works, If you read up I've explained how, late I'll post some photo and videos to be more clear.
Honestly it's the first time I see no support on some software modding, and the market for this thing it's not small..
An alternative ip67 just a bit more refine and specific for motorcycle it's 250euros, I've payed mine 47euros.

Anyone have and is willing to share latest firmware for Maxca C5? Anyone who bought navigation from Maxca seller. I need version 202302281613
Update instructions here
MAXCA C5 PRO 202302281613.Zip
Many thanks

Need Maxca C5 Pro latest firmware. Any one pls send me the firmware.