Galaxy A3 TWRP, can't skip Auto Recovery - Galaxy A3, A5, A7, A8, A9 Q&A, Help & Troubleshoot

Hi together!
i have the same problem like this guy. Odin TWRP flash runs normally. After this i press "Vol- + Power+ Home" to leave the download mode. I tried to directly switch to recovery mode (Vol+,Power,Home), but it won't work. After (or while) shutting down the A3 says "Installing system update" and TWRP is gone... What now?
Greetz DarkDonald

UPDATE: Now it works. I used TWRP-3.0.2-1 with ODIN 3.12.7.

Related

[Need Urgent Help] I9500 booting into download mode

I am on Samsung galxy s4 I9500
crdroid rom 5.1.1
Today i installed CWM recovery(i was on twrp) using the dd method
http://forum.xda-developers.com/showthread.php?t=2362838
when i switched off my phone and held down the buttons to go to recovery mode(vol up + power +home)
it went into a screen saying
" Downloading...
do not turn off target"
without the "odin mode" and other stats such as device model, device status etc
and now whenever i try to normally boot into my rom it gives the screen saying
" Downloading...
do not turn off target"
i tried removing the battery and then inserting it in again but no luck
but i can go into the odin mode
Please help
I think there is a problem with your "volume down" button. Because it's possible to boot to download mode without the home button. This has happened to me before. I think you may need to open your device, or take it to a repairer.
CWM is outdated. I recommend sticking with TWRP. Sounds like flashing CWM did something to the ROM.
Try re-flashing stock ROM via Odin if possible.
Flash TWRP recovery through Odin on download mode, then flash your ROM zip through TWRP.. Done..
Sent from my GT-I9500 using Tapatalk
Did what @gp545 told.
And it worked

i need emergency help to my constant recovery boot loop without any recovery mode.

hello, i think i just bricked my note 3. i accidentally boot the phone into the recovery mode on my sm-n9005 singapore lte version.
i downloaded this application called Quick Boot (Reboot) by GHCV on google play store. upon opening up the application and selecting the "Recovery" mode, it rebooted my phone into the recovery mode but there is a problem. it keep on saying: "Recovery is not SEandroid enforcing set warranty bit: recovery" and it constantly stuck in the recovery boot loop ever since then till now. my note 3 sm-9005 5.0 version is rooted by kingo root. i tried to install TWRP into my note 3 but failed, on the odin 10.7 it showed that it is successful but on my phone it doesn't even go into TWRP recovery mode. i tried these steps but all failed: pull out battery then press volume down, power button and home button for awhile then put in battery; boot it into download mode then press volume down to restart but still it brings me to recovery boot loop. i cannot even go and hardware reset my phone anymore. please help me i need my this phone urgently as this is my every day phone. i didnt flash CWM too as i ran out of time. please reply me as soon as possible to my email [email protected] thanks. urgently needed help.
mastermind_tan said:
hello, i think i just bricked my note 3. i accidentally boot the phone into the recovery mode on my sm-n9005 singapore lte version.
i downloaded this application called Quick Boot (Reboot) by GHCV on google play store. upon opening up the application and selecting the "Recovery" mode, it rebooted my phone into the recovery mode but there is a problem. it keep on saying: "Recovery is not SEandroid enforcing set warranty bit: recovery" and it constantly stuck in the recovery boot loop ever since then till now. my note 3 sm-9005 5.0 version is rooted by kingo root. i tried to install TWRP into my note 3 but failed, on the odin 10.7 it showed that it is successful but on my phone it doesn't even go into TWRP recovery mode. i tried these steps but all failed: pull out battery then press volume down, power button and home button for awhile then put in battery; boot it into download mode then press volume down to restart but still it brings me to recovery boot loop. i cannot even go and hardware reset my phone anymore. please help me i need my this phone urgently as this is my every day phone. i didnt flash CWM too as i ran out of time. please reply me as soon as possible to my email [email protected] thanks. urgently needed help.
Click to expand...
Click to collapse
Home-Volume Down-Power = Download Mode
Home-Volume Up - Power = Recovery Mode
You'll need to flash the Bootloader and Recovery. It may start up at this point. If not, then flash the Singapore ROM. You can extract the bootloader and recovery and then make them a .tar .md5 file for Odin. Read about it HERE. I've used it to recover my Canadian SM-N900W8 Note 3. All it would do was vibrate and boot loop. Now I'm 100% back up and running in Lollipop. Only use files for your version of the Note 3.
http://www.sammobile.com/firmwares/database/SM-N9005/
Singapore has 4 cell providers to choose from.
Or
you can try using Samsung Kies . Tools > Emergency Firmware Recovery. You'll need the serial # under your battery.
Or you just flash this one https://idlekernel.com/twrp/3.0.0-0/twrp-3.0.0-0-hlte.tar.md5 by Odin on the AP slot. If you really have a SM-N9005 like me (No other strange SM-N900* one!) this will work and fix your loop by updating the bricked recovery to the most recent TWRP one. Here is more information I'd recommend to at least read a bit of to at least understand a bit what you are installing by that: http://forum.xda-developers.com/showthread.php?t=2467001
ODIN 3.09 for ya: http://androidhost.org/PVAIv (using old crap 1.85 is NOT NEEDED)

[solved] Bricked? A3 2017, no download accesible, "failed to set up dirty target"

[solved] Bricked? A3 2017, no download accesible, "failed to set up dirty target"
Hi!
I just bricked my A3 2017. After flashing a stockrom with ODIN no boot is possible any more. I cannot enter the download mode because I just get the blue screen with the android saying "no command".
Pressing Power + Vol-up + home leads to a message
"E: Failed setting up dirty target [hwr-symlink] failed to mount /system as rw"
Maybe the stockrom file was corrupt. Is there anything I can do to get into download mode again or to flash without odin?
I am coming from Lineage 16, so maybe the boot looder of stock 8 isn't running if you have installed Android 9 previously.
Any hints?
After many tries with vol-down and home I managed to get to the download screen sometimes. After that I tried to flash AP files from stockrom again but never succeeded. I don't know why I get past the blue "no command" screen in maybe 1 of 20 attempts with the same key combination (vol-down and home) only.
Today I tried to flash a recovery from here
https://desktop.firmware.mobi/device:141/firmware:15535
This was successful and I managed to boot into recovery. In recovery mode I booted into bootloader and the phone booted to normal stockrom I flashed at the beginning (before the nightmare begun).
Still, I don't know what happened but it seems to be some problem of rw-rights...
Anyway... Problem solved!

Recovery mode boots to no command

A bit of history on this device (Galaxy a3 2017 A320FL)
I rooted the phone, it got FRP locked so later I tried Lineage OS. Didn't like it so I went back to Stock firmware.
It's working fine but when accessing the recovery mode via power off + volume up + home it boots to the "installing system update" screen that shortly after turns into a "no command" screen. Long pressing those three buttons again I get into the real recovery mode.
I already tried flashing the stock recovery image from here https://desktop.firmware.mobi/device:1680/firmware:20213/download/recovery.tar.md5/landing but the recovery mode keeps acting weirdly.
Any suggestions?

TWRP GALAXY S10+ is dead ?

Hello
I did rooting for the galaxy s10 + everything went as planned.
I wanted to upload TWRP, but I did it through the application from the play store right after the rota ..
I made a mistake and uploaded TWRP for the second time through odin ... and it was an error odin detects the phone but I can not enter recovery or dowlnoad mode .. what is wrong? the phone, when the samsung logo appears, turns off and over and over again as I hold the key combinations ..
You have to flash neutralized vbmeta.img alongside TWRP, and when you are entering TWRP, your phone has to be connected to the PC.

Categories

Resources