Error 6 in TWRP - Samsung Galaxy Core Prime Questions & Answers

Every time I try to flash a rom I get : twrp updater process ended with error 6
I've tried 3 different roms...

Have you tried a different TWRP version? This usually happens due to an incompatible TWRP version or a badly coded updater script

Related

updater script/twrp error. Help :(

Im having trouble installing mahdi and other roms. Im installing the correct version for my device (d803) but I keep getting a updater script fail. I don't understand how to fix the updater script. Before the updater script fail I ws getting a "cannot open zip" error but I rediwnloaded my rom and it got past that error to the updater script.
I flashed my recovery using flashify (twrp 2.6.3.2) I dont know maybe thats the cause. Can I reflash a recovery or do I have to do an extra step. Please help
You can't use that version of twrp to flash kitkat ROMs. Update twrp to at least 2.6.3.3.
Sent from my VS980 4G

Unable to install ROM/update recovery?

Heya guys, I've been rocking my OnePlus 2 for a while. I was wanting to install a newer ROM on it but I seem to run into some problems and I just can't figure it out.
I tried to install several roms (which are all based on 7.1 android) and I seem to be getting the same error on all of them: E:Error executing updater binary in zip '/sdcard/crDroidAndroid-7.1-20161128-oneplus2.zip' This was when I tried the crDroid mod, of course. The only ones that seem to work are CM13 and OxygenOS 2.2.
Couldn't really find a good solution for this when I google'd. I tried carefully wiping what I had to but that didn't seem to help.
I also tried updating my recovery, but when I try to update my recovery it just freezes when I boot. I tried this using fastboot and or via TWRP. I'm currently using version 2.8.7.0 of TWRP because the lastest version of TWRP bricks my recovery. I've also tried the blue spark TWRP and TWRP-hybrid, they don't seem to work either, my phone just stays on the 1+ logo. I have to flash the old version of TWRP back onto it using fastboot to get a working recovery.
Anyone have a solution for me?
EDIT: I have a Chinese OnePlus2, the A2001.
EDIT2: Forgot to mention something that might be critical to the problem: I did update from OxygenOS 2.2.1 to the latest as of now, 3.1. This removed my TWRP recovery and I couldn't get the new one to work, which made me install 2.2.1 again. I've seen people mention some problems with 3.1 so this might be the cause of it?

P9 Bootloop after installing 'Elite Kernel', but can still use ADB and fastboot

Hello. a little while ago I restored my Huawei p9 lite nougat L31C440B380 rom from a bootloop thanks to tw1st3d83's P9 Lite Toolkit but since then i haven't been able root it again properly using magisk and other supersu apps because when i boot up music and sound don't play on my apps and videos on apps don't work at all, yet when i unroot my phone works normally, which is strange as i've rooted many times before with no problems. I'd been having some issues with magisk then due to installing and then deleting the viper4arise mod as apps didn't show in my drawer and magisk modules as well as the manager started to malfunction frequently. I looked around for anything that might help me fix this and came across HassanMirza01's P9 Lite elite kernel (All Variants CxxB3xx Phh Superuser v9 version and MagiskSU v10 version based on the b380 Rom) and decided to try it out. I used a special modded version of oldroid's twrp (TeamElite) https://www.androidfilehost.com/?fid=889764386195914200 to flash the kernels, the phh Superuser 9 version, https://www.androidfilehost.com/?fid=529152257862726224 , and the magiskSU 10 version, https://www.androidfilehost.com/?fid...0096634768996. Because they were pre-rooted, I assumed at the time i'd be able to solve my root problem.
When i was using the kernel I noticed everything ran more smoothly than usual but sound and video still weren't working. Because the kernels were pre-rooted before i installed, i think they may have modified the boot image in such a way that even when i completely format data with twrp and do an advanced wipe, then restore the factory images including the stock boot image i extracted from the B380 rom it starts up normally but gets stuck on the loading screen. At first I thought it needed time to load so I left it to charge overnight as the battery was pretty low but i when i woke up the next morning it was still on the Huawei logo. i don't think the kernel has an uninstaller or if there's one i can flash that doesn't have root. If i flash the boot image that I patched earlier with magisk, everything loads fine but i'm still faced with the same problems with no video or sound. I've been thinking of just reflashing the stock images and then relock the bootloader so i can do three button "dload" method for a clean install of my B380 rom as i've tried to use it before and failed as i get this error message before it finishes:
write radio image...
32K crc checked failure
E:unknown command [errno]
update_huawei_pkg_from_ota_zip: update from zip failed
Updater process ended with ERROR: 7
But seeing as how the kernel has altered the boot image I can only use the boot image that I patched with magisk or supersu.
I'm definitely sure that the method won't be able to work on a phone that's rooted but what i'm more worried about is that something goes wrong and i end up in a bootloop with no way to use adb to unlock the bootloader or use recovery, pretty much bricking the device. I've looked around for other kernels i might be able to flash and restore my device like Smoky Kernel and Rusty Kernel but they didn't work at all as opposed to the Elite Kernel. Can I lock the bootloader with a rooted phone and my reinstall my stock rom with the three button method or is there another way i could go about this? I'm asking this way because every time i unroot with either magisksu elite kernel or my magisk boot image the phone will always bootloop. The TWRP version I'm on, 3.1.1-0 isn't very useful at the moment compared to when I was on MM because when I had a problem I just flash and forget, but as the stock rom has two files it's a bit harder for me to get the hang of it so i would be very grateful for where to go from here.

Zip treble incompatibility error twrp

Need urgent help. I really want to try Android pie roms but twrp won't let me flash any of it. It says zip treble incompatibility error or invalid file format. Something like that. Already flashed 2 roms with the same result. What went wrog and how to fix it?
Flash latest twrp, 3.2.3 ver

ERROR 3004 while installing any roms via twrp

Hello,
actually I have Xiaomi.eu rom with unlocked bootloader.
I'm trying to install a custom rom to have at least android 7 on my redmi 4 prime, but when I try to flash with twrp, I recive the following message:
E3004: This package is for device: Markw; this device is .
Updater process ended with ERROR: 7
Error installing zip file 'sdcard/…….zip'
I usually save the new rom in SDcard and then install it via twrp
I tried 2 different roms but with the same error.
Installing xiaomi.eu rom, I have no errors
Thanks for you help
BUMP - same here! I have the same problem while installing custom ROMS.
I had the same issue, you need a trebble recovery.
Try with this one. https://androidfilehost.com/?fid=890129502657599344

Categories

Resources