Related
Hi forum,
this is my first post here and I am writing this on behalf of my missis, so bear with me should I not state the obvious or ask too easy stuff. I am normally an iOS user and have not had frequent contact with updating / flashing / rooting Android devices.
The Nexus 4 in question is completely stock, nothing has ever been rooted / flashed or updated. The device runs 4.3 (JWR66Y) for some time now (I know, I know... but she is rather non-technical) and for quite some time it's failing to accept the OTA update of KitKat 4.4 (KRT16S). The device downloads the update in the background and notifies about it's existence in the notification area. From there you are able to agree to the update, the device reboots, the update process starts to run and then it just fails with the image of the lying Android mascot just stating "Error".
From there you can just reboot the handset normally into Android OS. Subsequent attempts of the update continue to fail, even after a factory reset.
I have now tried to manually update with the following file http :// android.clients.google.com/packages/ota/google_mako/c7d8660af65b878835d5248252f51dcbf53c2001.signed-two-step.signed-occam-KRT16S-from-JWR66Y.d1b99704.zip and the ADB toolset from the official Android SDK Bundle on Linux. I can properly get the device into recovery mode, get it to the point where it accepts sideloads and then I just issue adb sideload <filename of the above mentiond .zip>. So far, so standard.
The file transfers, update starts but it aborts the install because an existing file does not match the expected content: EMMC:/dev/block/platform/msm_sdcc.1/by-name/modem
Google research suggest this is the case if you have rooted the device before or tampered in some way with the bootloader. No such thing happened here - this is the most standard Android device possible. It hasn't even been attached to a PC before.
I also find various requests to extract the radio.img or modem.img from the stock JWR66Y image and flash it with fastboot. On the one hand I am not sure how do this (all tutorials I can find do this as part of a complete, destructive flashback which I am not seeking to do) and on the other hand I fail to understand how this file's checksum can deviate from the expected value. Is it corrupted or has it been updated by the provider? The handset has been bought regularly directly from Google and is used in Germany. Reverting it to a file from the stock factory image will not cause any problems with the modem?
Any pointers or help are well appreciated.
What is the baseband version listed in settings -> about phone?
If your radio version isn't the listed:
Code:
M9615A-CEFWMAZM-2.0.1700.84
or any of the ones listed here: Nexus 4 Stock Roms - XDA wiki you may actually have a version that noone else does. (or possibly a modded version)
Assuming you have already unlocked your bootloader, it would be:
Code:
fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1700.84.img
with the radio extracted from the JWR66Y factory image, if you wish to update via ota.
If you have not unlocked your bootloader, then you will not be able to update at all unless you unlock it and wipe your data.
(as you mentioned the contents of the baseband do not match the expected one)
-------------------------------------------------------------------------------------------------------------------------------------------
If it's not any of the above versions, you could possibly have a previously unknown version.
If that's the case, could you dump it before updating?
To do that, the simplest way would be to boot a custom recovery (such as clockworkmod) with the following:
Code:
fastboot boot <path to recovery.img>
and after it loads
Code:
adb shell dd if=/dev/block/platform/msm_sdcc.1/by-name/modem of=/sdcard/newmodem.img
-------------------------------------------------------------------------------------------------------------------------------------------
If you wish to manually update, you can download the KTU84P factory image and flash it on top of your existing rom with the following commands:
(extract the contents of image-occam-ktu84p.zip from occam-ktu84p-factory-b6ac3ad6.zip)
Code:
fastboot flash bootloader bootloader-mako-makoz30d.img
fastboot flash radio radio-mako-m9615a-cefwmazm-2.0.1701.03.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
and that'll force update it without wiping data. Keep in mind you MUST flash both the bootloader and radio together or you will not be able to use cellular services.
Hi,
Im working on adding the OnePlus 1, 2 and 3 device to the Unified Android Toolkit but need some help as I don't own any of the devices.
If anyone has a device which has not been unlocked or rooted, I need to know the error message displayed in the command prompt when the fastboot oem unlock command is run without enabling oem unlocking in developer options.
I also need a few people who could help test various procedures in the Toolkit. I am modifying the Nexus Toolkit so most things will be the same.
Any help and/or knowledge about the OnePlus devices would be appreciated.
Thanks, Mark.
Questions:
1. Can you fastboot boot on OnePlus devices (fastboot boot boot.img or fastboot boot recovery.img) or does the image need flashing first. I have looked at some root procedures for the OnePlus and they fastboot flash the imge first, then reboot to bootloader and fastboot the image. Im not sure what that is about.
2. Does the standard twrp recovery image work on the OnePlus devices? I have seen a lot of posts where twrp has failed and a different twrp recovery was recommended to fix the problem (which then worked).
3. I need links to all the builds for the OnePlus 1, 2 and 3 devices. Does anyone have these?
4. Does the Universal adb driver pack from koush (CWM) work with the OnePlus? I have found the official drivers made by OnePlus for their devices but I just want to make sure they are the best ones to use. I read that samsung drivers also work.
5. I have been told that the OnePlus devices usb mode does not revert to "charging only" like all the Nexus devices and that adb commands can be sent with the device in MTP mode (Nexus devices need to be switched to PTP to communicate). Can this be confirmed.
I think this is all I need to get a working Toolkit ready within a few days.
Mark.
mskip said:
Questions:
1. Can you fastboot boot on OnePlus devices (fastboot boot boot.img or fastboot boot recovery.img) or does the image need flashing first. I have looked at some root procedures for the OnePlus and they fastboot flash the imge first, then reboot to bootloader and fastboot the image. Im not sure what that is about.
2. Does the standard twrp recovery image work on the OnePlus devices? I have seen a lot of posts where twrp has failed and a different twrp recovery was recommended to fix the problem (which then worked).
3. I need links to all the builds for the OnePlus 1, 2 and 3 devices. Does anyone have these?
4. Does the Universal adb driver pack from koush (CWM) work with the OnePlus? I have found the official drivers made by OnePlus for their devices but I just want to make sure they are the best ones to use. I read that samsung drivers also work.
5. I have been told that the OnePlus devices usb mode does not revert to "charging only" like all the Nexus devices and that adb commands can be sent with the device in MTP mode (Nexus devices need to be switched to PTP to communicate). Can this be confirmed.
I think this is all I need to get a working Toolkit ready within a few days.
Mark.
Click to expand...
Click to collapse
1. Yes,
Code:
fastboot boot boot.img
works.
2. Old firmware needs old TWRP (link) as new firmware needs new TWRP (link).
There is also hybrid recovery which supports both firmware (link) or also this thread which lets you flash right firmware with the good recovery.
3. Thread to official zip and unofficial fastboot files for the Oneplus Two. Here for the Oneplus One. Thanks to @Spannaa. I think mirrors for the Oneplus 3 are actually not available.
4. I don't know.
5. Yes, in MTP, adb commands work. But I think without USB for Marshmallow, the connectivity will go back to Charge only.
mskip is in the house ??
Sent from my ONE A2005 using Tapatalk
Last thing to do is the stock firmware flashing procedure but I think everything else is done.
Does anyone have a OnePlus 1, 2 or 3 and can test any parts of the Toolkit? Main parts to test is driver install, unlock/relock, apk and folder backup and rooting.
Firmware flash procedure should be finished by tomorrow.
Mark.
Hi Mark,
I got a OnePlus 2 with latest OOS 3.0.2
Bootloader unlocked
rooted
TWRP 3.0.2-1
I'm willing to test...
Manuel
castor31 said:
Hi Mark,
I got a OnePlus 2 with latest OOS 3.0.2
Bootloader unlocked
rooted
TWRP 3.0.2-1
I'm willing to test...
Manuel
Click to expand...
Click to collapse
Thanks, what kind of testing can you do?
If you don't want to touch your rom then the basic functions (apk backup, booting to stock/custom recovery) but ideally if you can make a twrp backup or don't mind wiping the device then I need the bootloader unlock, flash stock firmware, rooting, etc tested. If you can do the more in depth testing I can compensate you with a pro code so you can also test the ALLINONE root procedure.
Let me know as the OnePlus 2 main code has been completed and the device modules are being built now.
Mark.
Hi Mark.
OnePlus One with latest COS-13.1-ZNH2KAS1KN
stock
bootloader unlocked
not rooted
twrp backup done
Willing to help with more in depth testing if still needed.
Frank
mskip said:
Thanks, what kind of testing can you do?
If you don't want to touch your rom then the basic functions (apk backup, booting to stock/custom recovery) but ideally if you can make a twrp backup or don't mind wiping the device then I need the bootloader unlock, flash stock firmware, rooting, etc tested. If you can do the more in depth testing I can compensate you with a pro code so you can also test the ALLINONE root procedure.
Let me know as the OnePlus 2 main code has been completed and the device modules are being built now.
Mark.
Click to expand...
Click to collapse
Yes, I can test all this.
I did a dirty flash when the OOS3 community build was released in March. So its time for me to wipe my device and do a clean install...
I'm using your Toolkit with pro for my GNex, n8000 and Nexus5. would be great if you can provide a pro code.
Best
Manuel
UPDATE - TEST RELEASE FOR ONEPLUS DEVICE SUPPORT
I have finished all the work on the OnePlus modules for the 1, 2 and 3 devices and it is ready for testing.
You can download and test the Toolkit from the below link. Please remember that this IS a test version at the moment as I do not own any OnePlus devices but I have checked all the code thoroughly and don't see any problems. I am especially pleased with the unlock/lock routines and will probably implement the code for the Nexus modules if it works well.
Everything can be checked (and please do) except downloading a stock build directly from the Toolkit as I am waiting to hear back from AndroidFileHost to see if I can get direct links to use in the Toolkit. The fastboot flash routines are working though and the Toolkit will detect the storage of the device (16GB or 64GB) and flash the relevant userdata image so you do not have to do that manually anymore.
I have used the Universal USB driver pack from CWM so if anyone has not installed OnePlus drivers yet PLEASE test if this works. I did originally include the official drivers from OnePlus but they close the Toolkit when the drivers installation starts and thats not great.
The ALLINONE routine should work fine and I have sent out some pro codes to testers to check it all works.
All builds are covered and the correct version of TWRP will be downloaded depending on the build selected. Please check everything and let me know of any bugs or textual errors (as I used a lot of the Nexus code) so I can release it publicly as soon as possible.
Download Link: http://skipsoft.net/?wpdmdl=2627
Thanks, Mark.
Frudge1701 said:
Hi Mark.
OnePlus One with latest COS-13.1-ZNH2KAS1KN
stock
bootloader unlocked
not rooted
twrp backup done
Willing to help with more in depth testing if still needed.
Frank
Click to expand...
Click to collapse
Mark- I have the same version on my OnePlus One but unable to unlock the bootloader also. Can you share the procedure to do it. So far, I was trying to use the Toolbox V6 and when I do unlock bootloader in fastboot mode but phone doesnt get detected even. Please help
reply.rathi said:
Mark- I have the same version on my OnePlus One but unable to unlock the bootloader also. Can you share the procedure to do it. So far, I was trying to use the Toolbox V6 and when I do unlock bootloader in fastboot mode but phone doesnt get detected even. Please help
Click to expand...
Click to collapse
Has the bootloader been unlocked before or is this the first time you want to unlock it?
Do you have adb and fastboot drivers installed?
Do you have any knowledge of using adb/fastboot commands in the command prompt?
First thing is to make sure you have the correct drivers installed: http://www.skipsoft.net/?page_id=1302
You can try the Toolkit to see if the bootloader will unlock or I can talk you through the procedure but its a simple command (fastboot oem unlock, or from the toolkit fastboot-toolkit oem unlock).
If it won't unlock you may need to boot to stock recovery and flash a stock image back to your device.
Mark.
Hello Friends,
I have seen several Youtube videos and read the thread of xda senior member the rooter to unroot and revert the oneplus 3t to stock. The senior member guided very beautifully to have the stock ROM with or without the bootloader unlocked and fix DM-verity issue.
The following guide is not my invention, I have taken the sources from internet and xda site. The difference is that I used TWRP to flash official oxygenOS zip file of 4.1.6 and I am surprised that this file also flash stock recovery, therefore I did not flash stock recovery and proceeded further for full wipe and lock bootloader. In the middle of thread, I also alerted and said that if stock recovery is not flashed after installing zip of 4.1.6, then it is mandatory to flash stock recovery from fastboot before locking bootloader, otherwise your devices will be bricked.
1) Flash Oxygen OS 4.1.6 through latest TWRP 3.1.1.2 and remember to wipe system, cache, data and delvic cache excluding internal storage before flashing. Do not wipe completely otherwise you will have TWRP installed again and you will have to flash stock recovery through fastboot method.
Link for official TWRP for oneplus 3t: https://dl.twrp.me/oneplus3t/twrp-3.1.1-2-oneplus3t.img.html
Link for official stock recovery for oneplus 3t: http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_4.1.7/ , here go down the page and click on "Download Oxygen Recovey (Optional)"
After booting successfully, go to setting and tap the build number 7 times to enable advanced reboot and usb debugging and connect your mobile with your PC and make sure that you have adb drivers installed on your PC.
Now, extract the folder of fastboot and press the right click of mouse while pressing shift button. Basically you have to open command prompts. Now type: adb reboot recovery and hit enter.
2) Your phone should boot into oxygen stock recovery and if it does not boot to stock recovery then flash stock recovery from fastboot.
2) Now your oneplus 3t is having Oxygen OS 4.1.6 with stock recovery but having DM verity issue. Now, full wipe ( select erase everything) in stock recovery and reboot. This wiping through stock recovery may be extra step (locking the bootloader will erase your data completely) but I did this to avoid any problem.
3) Now, sideloaded the same file i.e. oxygen OS 4.1.6 or OOS 4.1.7 through the following command:
adb sideload OTA.zip
where OTA is zip file downloaded from oneplus site for oneplus 3t and renamed it as OTA
(For this, you will have to go to stock recovery and select the option of "install from ADB" then a pop up screen will show you that you are in sideload mode. But remember that sideloading the OS is a slow process; so keep patience and do not remove cable in the middle of installation otherwise your device will be bricked.)
4) Now, lock the bootloader from the command in fastboot mode:
fastboot oem lock
after entering the command in fastboot mode, a confirmation will be asked to lock the bootloader for Yes or No, confirm from the volume keys and let boot the phone automatically and wait to finish.
5) If you sideloaded the OOS 4.1.6 in step 3 then you will see the update notification of OOS 4.1.7 which is about 450MB, download it ,install it and reboot.
6) Enjoy............the stock
Thanks to guides on youtubes and xda site.
Please note that if you follow these steps, you will not have any issues because I have done again and again without any issues but I do not take any responsibility of bricked devices if you perform wrong method or skip any thing.
Please hit the like if find this useful, it is absolutely freeeeee.............
What if I currently have no OS installed? Does that matter?
sandeep_kumar said:
Hello Friends,
I have seen several Youtube videos and read the thread of xda senior member the rooter to unroot and revert the oneplus 3t to stock. The senior member guided very beautifully to have the stock ROM with or without the bootloader unlocked and fix DM-verity issue.
The following guide is not my invention, I have taken the sources from internet and xda site. The difference is that I used TWRP to flash official oxygenOS zip file of 4.1.6 and I am surprised that this file also flash stock recovery, therefore I did not flash stock recovery and proceeded further for full wipe and lock bootloader. In the middle of thread, I also alerted and said that if stock recovery is not flashed after installing zip of 4.1.6, then it is mandatory to flash stock recovery from fastboot before locking bootloader, otherwise your devices will be bricked.
1) Flash Oxygen OS 4.1.6 through latest TWRP 3.1.1.2 and remember to wipe system, cache, data and delvic cache excluding internal storage before flashing. Do not wipe completely otherwise you will have TWRP installed again and you will have to flash stock recovery through fastboot method.
Link for official TWRP for oneplus 3t: https://dl.twrp.me/oneplus3t/twrp-3.1.1-2-oneplus3t.img.html
Link for official stock recovery for oneplus 3t: http://downloads.oneplus.net/oneplus-3t/oneplus_3t_oxygenos_4.1.7/ , here go down the page and click on "Download Oxygen Recovey (Optional)"
After booting successfully, go to setting and tap the build number 7 times to enable advanced reboot and usb debugging and connect your mobile with your PC and make sure that you have adb drivers installed on your PC.
Now, extract the folder of fastboot and press the right click of mouse while pressing shift button. Basically you have to open command prompts. Now type: adb reboot recovery and hit enter.
2) Your phone should boot into oxygen stock recovery and if it does not boot to stock recovery then flash stock recovery from fastboot.
2) Now your oneplus 3t is having Oxygen OS 4.1.6 with stock recovery but having DM verity issue. Now, full wipe ( select erase everything) in stock recovery and reboot. This wiping through stock recovery may be extra step (locking the bootloader will erase your data completely) but I did this to avoid any problem.
3) Now, sideloaded the same file i.e. oxygen OS 4.1.6 or OOS 4.1.7 through the following command:
adb sideload OTA.zip
where OTA is zip file downloaded from oneplus site for oneplus 3t and renamed it as OTA
(For this, you will have to go to stock recovery and select the option of "install from ADB" then a pop up screen will show you that you are in sideload mode. But remember that sideloading the OS is a slow process; so keep patience and do not remove cable in the middle of installation otherwise your device will be bricked.)
4) Now, lock the bootloader from the command in fastboot mode:
fastboot oem lock
after entering the command in fastboot mode, a confirmation will be asked to lock the bootloader for Yes or No, confirm from the volume keys and let boot the phone automatically and wait to finish.
5) If you sideloaded the OOS 4.1.6 in step 3 then you will see the update notification of OOS 4.1.7 which is about 450MB, download it ,install it and reboot.
6) Enjoy............the stock
Thanks to guides on youtubes and xda site.
Please note that if you follow these steps, you will not have any issues because I have done again and again without any issues but I do not take any responsibility of bricked devices if you perform wrong method or skip any thing.
Please hit the like if find this useful, it is absolutely freeeeee.............
Click to expand...
Click to collapse
How can i find one plus 3t recovery I cant find both twrp and one plus official recovery.
Red Magic 5G Bootloader Unlock Guide: OR get ROOT & TWRP without unlocking the BL!!!
***Bootloader Unlock Instructions for the Nubia Redmagic 5G + installing TWRP:***
WARNING: ANY BOOTLOADER UNLOCK METHOD INVOLVES THE RISK OF BRICKING YOUR DEVICE PERMANENTLY. WHILE THERE IS USUALLY A WAY TO RECOVER, DO NOT ATTEMPT THIS PROCEDURE IF YOU DO NOT KNOW WHAT YOU ARE DOING. BAD THINGS CAN HAPPEN. YOU HAVE BEEN WARNED!!! YOU MAY BE LEFT WITH A USELESS BRICK!!! READ ALL FURTHER WARNINGS EXPERIMENTAL METHOD IN ORIGINAL DOWNLOAD FILE WORKS, I'M USING IT
If you want a NOOB guide look at this post: https://forum.xda-developers.com/nu...beginner-tutorial-unlock-bootloader-t4131585/
Also note a user has managed to fix the FP sensor post BL unlock, see this post here: https://forum.xda-developers.com/nu.../guide-calibration-finger-print-loss-t4132961
Still, I suggest root bypass it's better.
MegaNZ Link for Root without unlocking the Bootloader, and without breaking the FP, also includes instructions for installing BlackMagic5G (explanation below), adding HD VOLTE, how to restore from a brick, and some other cool tricks: https://mega.nz/file/igphSCTD#OybJo9t1zwvJ0bdbAcN2BCqxWXAfHdhk3JFB4_5xkVc
I suggest you flash my BlackMagic5G and don't unlock your bootloader at all - just root. It's CN 2.52 ROM based. You'll get VOLTE, , GApps installed, Rooted with Magisk, TWRP, debloated, YouTube Vanced, AdAway, SmartPack Kernel Manager, etc. - looks like the Global / NA variant of the ROM. Almost perfect except still uses Messages and Phone from Nubia. Plus you will enable Face Unlock not available in the Global or NA versions of the ROM, and FP will still work! Click on the Google Search bar widget and the mic icon takes you to the Google Assistant, the left icon is Google Feed, type in the middle bar for a Google Search. Has 1Weather Free weather widget that looks great, and Google Calendar widget for your whole month of activities. Translate, Lens, Chrome, all the Google Apps are there. And the Chinese Nubia apps are nearly all GONE!
MegaNZ Link for BlackMagic5G Beta - IT'S ONLY THE DATA PARTITION + ROOTED KERNEL + NA SPLASH SCREEN, you NEED to 1) install the Red Magic 2.52 ROM below FIRST 2) Root using the first link posted above 3) Flash restore this from TWRP: https://mega.nz/file/r9hF2BwS#RrAXiFWSBNX8dLqfrH8nNHo_uigPC8uYXonwhALhGbo
MegaNZ Link for the Red Magic 5G CN 2.52 ROM: https://mega.nz/file/aoxBFAqY#EDt2OZBGTME4ZGKnERKpK_t-aJT_rWgD0aqBFkilRcY
*** NOW THE BOOTLOADER UNLOCK INSTRUCTIONS ***
Go to Settings / About phone / Build Number (NX659_J_ENCommon_V3.08 on North American Variant), click 7 times, Now you are a developer message appears, go back a menu to Settings / Other system settings / Developer options.
Enable:
OEM unlocking "Allow the bootloader to be unlocked"
USB debugging "Debug mode when USB is connected"
Install Minimal ADB and Fastboot (Windows 10 in this example): https://www.androidfilehost.com/?fid=746010030569952951
Default install path is:
C:\Program Files (x86)\Minimal ADB and Fastboot\
Go to the Search button on the bottom on Windows 10, type cmd, Command Prompt will appear in the menu. Right click it and Run as Administrator. All commands to be typed will be run in this Command Prompt window (referred to as terminal) unless otherwise stated to run on the phone.
Now Terminal window appears (it says Administrator: Command Prompt in the heading):
Text displayed is:
Microsoft Windows
(c) 2020 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>
Typed in terminal:
cd "c:\Program Files (x86)\Minimal ADB and Fastboot"
I now connected the phone to a USB port on the PC.
On the phone, a Window appeared:
"Allow USB debugging?"
The computer's RSA key fingerprint is:
[36 digit code] Example:
C8:A17:E2:01:F6:A1
:368:10:E8:33:20:FB:
93:7D
Always allow from this computer (it's my computer so I clicked it since I trust the computer)
CANCEL / ALLOW (I clicked ALLOW)
Typed in terminal:
adb reboot bootloader
The phone reboots. Once the phone screen boots, in the center it says: Now you are in fastboot mode.
From the terminal I typed:
fastboot oem nubia_unlock NUBIA_NX659J
The terminal now displayed:
...
(bootloader) START update nubia fastboot unlock flag!!!
(bootloader) START set state to 1 ok!!!
In the terminal I typed:
fastboot flashing unlock *** DO NOT TYPE THIS IF YOU WANT TO KEEP A WORKING FP!!! READ TOP OF POST!!! AVOID THIS WITH THE EXPERIMENTAL METHOD OF ROOT WITH NO BL UNLOCK ***
Now a screen appeared on the phone with a big <!> red icon in the left corner. The rest in white text is a warning message. "By unlocking the bootloader, you will be able to install custom operating system on this phone. A custom OS is not subject to the same level of testing as the original OS, and can cause your phone and installed applications to stop working properly-
Software integrity cannot be guaranteed with a custom OS, so any data stored on the phone while the bootloader is unlocked may be at risk.
To prevent unauthorized access to your personal data, unlocking the bootloader will also delete all personal data on your phone.
Press the Volume keys to select whether to unlock the bootloader, then the Power Button to continue."
I selected UNLOCK BOOTLOADER and my device was completely erased. The factory OS loaded then. This process takes some time to complete.
Now the device rebooted with a warning message, and a big <!> yellow icon in the left corner.
"The boot loader is unlocked and software integrity cannot be guaranteed. Any data stored on the device may be available to attackers. Do not store any sensitive data on the device.
Visit this link on another device:
g.co/ABH"
Now the device reloads the firmware apparently and wipes all user data. Upon setting up the phone, the fingerprint display registration comes up and asked to place my finger on the back of the phone. There is no fingerprint sensor on the back of the Redmagic 5G! It is under the screen! So this step must be skipped. The ROM setup is corrupt or incomplete, a beta possibly. I setup the phone then went into Settings / Security to try to add a fingerprint. The button to add fingerprint then appears. Once I click the button, I get this error:
Loss of fingerprint calibration data
Loss of fingerprint calibration data was detected.
Currently unable to complete fingerprint entry,
please contact Nuia after-sales service via
4007006600
See the XDA post for recalibrating the FP: https://forum.xda-developers.com/nu.../guide-calibration-finger-print-loss-t4132961
ROOT FOR ALL DEVICES:
(These files are included in the tools download zip, Magisk 20.4 and MagiskManager-v7.5.1.apk, but this is the official source as updates post): Go to XDA and Download Magisk Manager and install the APK. Download the latest Magisk as well from the Manager. You can then reboot to Recovery (volume up + power, release the power button once the screen shows it loading, hold the volume up down until you see TWRP pop up). Flash Magisk from TWRP Install / Zip / sdcard / Magisk.zip reboot and you'll have root.
BL unlock first method was tested on North American variant and it works. But it breaks your FP sensor and gives you an annoying boot prompt.
If at any time you want to remove the OEM Bootloader unlock, you plug into the PC, go to the terminal for Minimal ADB and Fastboot, type:
adb reboot fastboot
fastboot oem nubia_unlock NUBIA_NX659J
fastboot flashing lock (screen will prompt to relock BL, choose to Relock)
The phone should reboot and install the original software. BUT...
If it says you are corrupted well, you have more issues.
You'll have to reflash the stock recovery.img, reboot to stock recovery, wipe data, wipe cache, and flash the CN update.zip rom to a flash drive FORMATTED TO FAT32 (annoying as hell) But you NEED a USB-C to OTG Adapter to attach a Flash Drive / SDCARD this way). If you don't have one, you better reflash TWRP using the prior instructions and flash the update.zip from there. Install, select the update.zip, flash. Wipe Data, Cache, ART/Dalvik. Reboot.
Now it should WIPE the entire phone and be back to normal Android 10 setup non rooted, no unlocked bootloader. Always beware of data loss doing root functions!!! Always be prepared to setup your phone entirely over again. Google Backup is very good to turn on before you do any of this stuff if you have already installed apps.
*** WARNING - THIS BYPASS METHOD COULD GO AWAY AT ANYTIME. IT SHOULD EVENTUALLY BE FIXED BY NUBIA ***
mslezak said:
{Mod edit}
***Bootloader Unlock Instructions for the Nubia Redmagic 5G + installing TWRP:***
Settings / About phone / Build # click 7 times, now your a dev message appears, good back a menu, go to Additional Settings / Developer Options
Enable:
ADB debugging, + OEM unlock
Connect phone to PC, approve device on phone RSA key for USB debugging
From Minimal ADB and Fastboot:
adb reboot bootlader
fastboot oem nubia_unlock NUBIA_NX659J
fastboot flashing unlock
(approve on phone with volume keys to unlock and hit the power button, now you'll get an annoyng mesage on boot as insecure unlocked BL) *ALL YOUR DATA WILL BE WIPED*
Next:
fastboot flash recovery recovery-TWRP-3.4.1B-0324-NUBIA_REDMAGIC_5G-CN-wzsx150.img
fastboot reboot recovery
Enter TWRP, set to not be removed by updates if prompted.
Boot up the device, setup as a new device. You're on stock ROM / kernel now unlocked.
Once you get up and running you'll want APK Mirror app to install stuff on the China Variant it's in the Nubia Playstore. Gboard download as well and set as default it's a lot easier than the Chinese keyboard that swaps between Chinese and English. Set size extra tall for this huge phone (I prefer anyhow). Chrome go download it from APK Mirror app as well. Then go to XDA and Download Magisk Manager and download it and install the APK. Download the latest Magisk as well from the Manager. You can then reboot to Recovery (volume up + power). Flash Magisk from TWRP reboot and you'll have root.
Note on my testing the fingerprint did not work after unlocking the bootloader. It says to contact Nubia support at some odd number. Hopefully they fix this.
Click to expand...
Click to collapse
You were able to actually install TWRP? Not just boot it? I thought A10 devices cant have twrp permanently installed?
That is a very good question my friend. I had to reflash it several times while rooting so it appears you are correct.
Now a window when I FIRST installed popped up and said make Recovery read only so a system update. can't overwrite it, to this I didn't even pay attention. So assuming that question does lock down recovery, it should stick.
mslezak said:
That is a very good question my friend. I had to reflash it several times while rooting so it appears you are correct.
Now a window when I FIRST installed popped up and said make Recovery read only so a system update. can't overwrite it, to this I didn't even pay attention. So assuming that question does lock down recovery, it should stick.
Click to expand...
Click to collapse
So its not permanent? Thats what I thought.
Well it could be permanent...
VZTech said:
So its not permanent? Thats what I thought.
Click to expand...
Click to collapse
What I was trying to say is that I've never had a phone where I had to select "prevent recovery from being overwritten" so I just clicked off the message. Had I selected "keep TWRP from being overwritten" then possibly it sticks. It's just a matter of making the recovery partition READ ONLY.
mslezak said:
What I was trying to say is that I've never had a phone where I had to select "prevent recovery from being overwritten" so I just clicked off the message. Had I selected "keep TWRP from being overwritten" then possibly it sticks. It's just a matter of making the recovery partition READ ONLY.
Click to expand...
Click to collapse
The issue with that could be any future updates though. Rm uses there own recovery for that. They don't provide fastboot images either I believe
Can anyone send me backup of the super partition?
I accidentally flashed an image to the super partition with twrp thinking it was the system partition (it technically is tho) and it bricked my phone and messed up twrp.
Only stock recovery works but the stock recovery cannot fix it by installing a full ota from a otg drive.
I do have a backup on my phone but it is inaccessable.
Could anyone please send me a backup of the super partition or have any idea on how to fix this?
(I tried to use edl and backup my data to recover my backup of the super partition but it seemed like it needed a programmer binary from qualcomm)
Future updates...
VZTech said:
The issue with that could be any future updates though. Rm uses there own recovery for that. They don't provide fastboot images either I believe
Click to expand...
Click to collapse
Yes what I've been told by prior Redmagic Users 3 and 3S is the ROM is released, as long as your boot.img is not patched with Magisk, it can be installed through the menus in Settings / About Phone / Update or someplace like that. You just download the ROM to the appropriate folder on the phone.
So far I have 1 link to a China ROM update here: https://ui.nubia.cn/rom/detail/65
Now on how to install the ROM, I use the Chrome browser set to autotranslate webpages. Most of the Chinese will be translated from here: https://bbs.nubia.com//thread-1136030-1-1.html
Basically it's going to wipe your device clean, and you can use a Nubia backup tool which will save all your items to a folder. Which then you should copy to your PC before installing the new ROM. Then it gives you instructions to get that data back onto your updated device.
apersomany said:
I accidentally flashed an image to the super partition with twrp thinking it was the system partition (it technically is tho) and it bricked my phone and messed up twrp.
Only stock recovery works but the stock recovery cannot fix it by installing a full ota from a otg drive.
I do have a backup on my phone but it is inaccessable.
Could anyone please send me a backup of the super partition or have any idea on how to fix this?
(I tried to use edl and backup my data to recover my backup of the super partition but it seemed like it needed a programmer binary from qualcomm)
Click to expand...
Click to collapse
Your probably screwed. I had this issue on a rm3s. You will need an unbrick tool. It was released for the rm3s about 4 mos after release. NUBIA should have true fastboot images available for download, but they dont.
VZTech said:
Your probably screwed. I had this issue on a rm3s. You will need an unbrick tool. It was released for the rm3s about 4 mos after release. NUBIA should have true fastboot images available for download, but they dont.
Click to expand...
Click to collapse
That's because of the super (dynamic) partition, see from the latest (and only) ROM:
Excerpt of the ROM installation script where it delineates the dynamic vs non dynamic partitions - you have product w/ a file transfer list, then vendor, system, and odm, The other files (boot.img, dtbo.img, splash.img, etc. and other various files) should be flashable with fastboot.
# Update dynamic partition metadata
assert(update_dynamic_partitions(package_extract_file("dynamic_partitions_op_list")));
unmap_partition("product");
block_image_update(map_partition("product"), package_extract_file("product.transfer.list"), "product.new.dat.br", "product.patch.dat");
unmap_partition("vendor");
block_image_update(map_partition("vendor"), package_extract_file("vendor.transfer.list"), "vendor.new.dat.br", "vendor.patch.dat");
unmap_partition("system");
block_image_update(map_partition("system"), package_extract_file("system.transfer.list"), "system.new.dat.br", "system.patch.dat");
unmap_partition("odm");
block_image_update(map_partition("odm"), package_extract_file("odm.transfer.list"), "odm.new.dat.br", "odm.patch.dat");
# --- End patching dynamic partitions ---
apersomany said:
I accidentally flashed an image to the super partition with twrp thinking it was the system partition (it technically is tho) and it bricked my phone and messed up twrp.
Only stock recovery works but the stock recovery cannot fix it by installing a full ota from a otg drive.
I do have a backup on my phone but it is inaccessable.
Could anyone please send me a backup of the super partition or have any idea on how to fix this?
(I tried to use edl and backup my data to recover my backup of the super partition but it seemed like it needed a programmer binary from qualcomm)
Click to expand...
Click to collapse
You should be able to flash the latest ROM via EDL mode if you've ever used EDL mode before, it usually requires shorting pins together in the device, although some recoveries will let you just boot into EDL mode if the phone still boots. It will be detected. Although on this device with the dynamic partition, I don't know how you would flash these in EDL mode... dynamic partitions - you have product w/ a file transfer list, then vendor, system, and odm that do not look like fastboot flashable parts. Possibly the unbrick tool for Redmagic 3/3S could be modified to do this for you.
mslezak said:
That's because of the super (dynamic) partition, see from the latest (and only) ROM:
Excerpt of the ROM installation script where it delineates the dynamic vs non dynamic partitions - you have product w/ a file transfer list, then vendor, system, and odm, The other files (boot.img, dtbo.img, splash.img, etc. and other various files) should be flashable with fastboot.
# Update dynamic partition metadata
assert(update_dynamic_partitions(package_extract_file("dynamic_partitions_op_list")));
unmap_partition("product");
block_image_update(map_partition("product"), package_extract_file("product.transfer.list"), "product.new.dat.br", "product.patch.dat");
unmap_partition("vendor");
block_image_update(map_partition("vendor"), package_extract_file("vendor.transfer.list"), "vendor.new.dat.br", "vendor.patch.dat");
unmap_partition("system");
block_image_update(map_partition("system"), package_extract_file("system.transfer.list"), "system.new.dat.br", "system.patch.dat");
unmap_partition("odm");
block_image_update(map_partition("odm"), package_extract_file("odm.transfer.list"), "odm.new.dat.br", "odm.patch.dat");
# --- End patching dynamic partitions ---
Click to expand...
Click to collapse
Yes those .img files can easily be fastboot flashed. Unfortunately it wont solve his problem. He needs the nubia unbrick tool, which is tough to get. I dont understand why Nubia makes things difficult. They should provide proper Fastboot files.
I already tried edl (not to flash, but to recover my backup of the super partition) but it seems like it needed a firehose binary. I still can use bootloader, fastbootd, recovery. It's just that the recovery fails at assert dynamic partition update thing with a error 7 (probably because my super partition turned into a normal partiton). I tried to flash a super empty image made with lpmake and try flashing the ota but that didn't work. I think if someone gives me a backup of the super partition I could flash that and that could work. I also had an idea of flashing a super partition of another devices factory image to make my super partition a dynamic partition, but I couldn't find any online.
apersomany said:
I already tried edl (not to flash, but to recover my backup of the super partition) but it seems like it needed a firehose binary. I still can use bootloader, fastbootd, recovery. It's just that the recovery fails at assert dynamic partition update thing with a error 7 (probably because my super partition turned into a normal partiton). I tried to flash a super empty image made with lpmake and try flashing the ota but that didn't work. I think if someone gives me a backup of the super partition I could flash that and that could work. I also had an idea of flashing a super partition of another devices factory image to make my super partition a dynamic partition, but I couldn't find any online.
Click to expand...
Click to collapse
I get a Global Device on Monday. I'll try to use Qualcomm tools to make a brick restore image of Global. If I get one made I'll post all the tools to restore the device on Mega.nz. Because of the super partition it has to be done this way. Not via TWRP as you know. I'm working on Dev tools for this device as fast as possible.
mslezak said:
I get a Global Device on Monday. I'll try to use Qualcomm tools to make a brick restore image of Global. If I get one made I'll post all the tools to restore the device on Mega.nz. Because of the super partition it has to be done this way. Not via TWRP as you know. I'm working on Dev tools for this device as fast as possible.
Click to expand...
Click to collapse
Thank you so much!
Okay I can't add anything special but daaamn this community is amazing. So much help I love you all
To relock BL repeat the instructions with 1 different command
Just replace
fastboot flashing unlock
with
fastboot flashing lock
Again you approve to lock on the phone prompt with the volume keys and your phone will be wiped and all will be back to normal, you'll be locked. And back to phone setup.
I'd edit the original post but the moderators took away my rights!!! Because I posted a Telegram link WHY - how do you expect development to get better???
BTW anyone with a NEW phone arriving that can record the FP failures and all errors please contact me so I can send to Nubia. They are waiting for me to reproduce the error but I already setup my new phone... Thinking I wouldn't be the ONLY ONE to contact [email protected] ... Guys you want developer support on this phone or not. Contribute please.
mslezak said:
{Mod edit}
***Bootloader Unlock Instructions for the Nubia Redmagic 5G + installing TWRP:***
Settings / About phone / Build # click 7 times, now your a dev message appears, good back a menu, go to Additional Settings / Developer Options
Enable:
ADB debugging, + OEM unlock
Connect phone to PC, approve device on phone RSA key for USB debugging
From Minimal ADB and Fastboot:
adb reboot bootlader
fastboot oem nubia_unlock NUBIA_NX659J
fastboot flashing unlock
(approve on phone with volume keys to unlock and hit the power button, now you'll get an annoyng mesage on boot as insecure unlocked BL) *ALL YOUR DATA WILL BE WIPED*
Next:
fastboot flash recovery recovery-TWRP-3.4.1B-0324-NUBIA_REDMAGIC_5G-CN-wzsx150.img
fastboot reboot recovery
Enter TWRP, set to not be removed by updates if prompted.
Boot up the device, setup as a new device. You're on stock ROM / kernel now unlocked.
Once you get up and running you'll want APK Mirror app to install stuff on the China Variant it's in the Nubia Playstore. Gboard download as well and set as default it's a lot easier than the Chinese keyboard that swaps between Chinese and English. Set size extra tall for this huge phone (I prefer anyhow). Chrome go download it from APK Mirror app as well. Then go to XDA and Download Magisk Manager and download it and install the APK. Download the latest Magisk as well from the Manager. You can then reboot to Recovery (volume up + power). Flash Magisk from TWRP reboot and you'll have root.
Note on my testing the fingerprint did not work after unlocking the bootloader. It says to contact Nubia support at some odd number. Hopefully they fix this.
Click to expand...
Click to collapse
Just in case if somebody need a Chinese version of official ROM v2.46 for RedMagic 5G.
Code:
https://mega.nz/file/vc0DiabR#npahTop-JXZ9Mwv-lA7G6DxTG2qqOOAf6AwW8NdEEKw
mslezak said:
Just replace
fastboot flashing unlock
with
fastboot flashing lock
Again you approve to lock on the phone prompt with the volume keys and your phone will be wiped and all will be back to normal, you'll be locked. And back to phone setup.
I'd edit the original post but the moderators took away my rights!!! Because I posted a Telegram link WHY - how do you expect development to get better???
BTW anyone with a NEW phone arriving that can record the FP failures and all errors please contact me so I can send to Nubia. They are waiting for me to reproduce the error but I already setup my new phone... Thinking I wouldn't be the ONLY ONE to contact [email protected] ... Guys you want developer support on this phone or not. Contribute please.
Click to expand...
Click to collapse
we found out that using the cn rom it all works without even unlocking the bootloader, even while oem unlock was disabled in dev options but there is some kind of vbmeta img required. a full guide is incoming.
VZTech said:
The issue with that could be any future updates though. Rm uses there own recovery for that. They don't provide fastboot images either I believe
Click to expand...
Click to collapse
You can flash their NX659J-update.zip files directly from TWRP that's how we restored our bricked devices already. So OTA updates no, but you can download them anyway and flash from TWRP directly. Yes we have to figure out a concrete restore method which isn't 100% working yet. I.e. all your data is lost this way apparently AT THIS MOMENT... MORE TO COME.
Nubia Red Magic 5G and 5S Roms and Root support Thread
Second post for TWRP and Magisk installation. Mirror for all roms and tools at end of post
Latest Official Rom updates
Android 11
US/Asia - V8.70 Nubia Link MD%: will update soon
EU - V7.70 Nubia Link MD5: will update soon
China - V9.50 Nubia Link MD5: 361AC13CA52AB83C239783FBAB088CEA
Android 10
US/Asia - V8.12 Nubia Link MD5: 6e930fc2431b3daeae2d94145926a6c1
EU - V7.15 Nubia Link MD5: bb9e3153716851e87f196ae6b4f44a2e
China - V6.23 Nubia Link MD5: BD447840ACA4D48F9443B94D2EAD890F
Change Log - 8.70 / 7.70 Android 11
- Security Patch October 2022
- Game Space enhancements
- Game space Gyro sensitivity menu
- game space touch sample rate improvement
- Fixed: corner of screen non-touchable in some cases
- Fixed: issue where game would fail to close
- Fixed: location of caller display
-Fixed: screen tearing when using 144hz
-
Bugs -
in Testing
- Always on display notification not showing
- memory leak in nubia launcher (requires forced close often to stop phone from lagging)
- small window mode for telegram and discord have wrong zoom/ aspect levels.
_____________________________________________________________________________________________________________
UNBRICK TOOL for 5S - Courtesy of @johnny886
Use this tool, with directions on the thread to restore your device to USA/Asia 8.07
you can then install TWRP and after flash any region rom after creating a somewhat universal unbrick tool for those in different regions.
Follow directions on the thread. but here is a link to the Thread. A Mirror for the tool is in my Personal Mirror at the bottom of this thread post.
Link to Thread
Confirmed working with 5G devices - but its recommended to update as soon as you unbrick.
_____________________________________________________________________________________________________________
For unlocked bootloader
Fix your fingerprint sensor.
here Link
--------------------------------
Update Instructions.
Note
for Android 11 do not flash through TWRP you will softbrick.
____________________________________________________________________
For Stock devices without root
- disable security. No pin, no face unlock, no finger print, no pattern. remove all security.
-download zip file
-go to system update tap three dots and select local update
-Navigate to update.zip and select.
-your phone will reboot and install new rom
- you phone will reboot once more and you will be greeted with your lock screen
- setup Phone with security options as before flash.
For devices with "LOCKED bootloader" Root / TWRP (not tested on A11)
- take backup of vbmeta and recovery partitions in TWRP
- change the name of both files to vbmeta.img and recovery.img
(VBmeta is often 64kb big and Recovery is often 90+mb big.)
- copy and paste these new img files into the update zip.
- flash through TWRP
- go back to main menu, select advanced, then select option
"disable replace TWRP" to keep TWRP as your recovery.
for devices with "Unlocked bootloader" (not tested on A11)
-make full backup
-download zip
-install zip through TWRP
-reboot
__________________________________________________________________________________
Custom Roms and Kernels
Kernel
Mattofthedead's Redmagic 5S kernel for LOS and Stock roms LINK
Roms
Rom Builder Ra's Custom Roms - Please post any bugs or issues in the related threads.
Pixel Experience Plus
Ressurection Remix
NOTE : to boot any Custom rom on the 5S device. Flash the Rom following the directions. then flash Matts LOS kernel Version 3
__________________________________________________________________________________
------------------------------
Old roms
Android 11
V8.65 Nubia Link MD5: 3d52e18c66366d3d23744184425d3926
V8.64 Nubia Link MD5: a7e61f5e2f7c377a6850cf6ac3a62aa7
V7.65 Nubia Link MD5: 746dad5b6145dfba1108355095a6ad46
V7.64 Nubia Link MD5: 55371ee8e5728aee2bc7df5b3a7d6585
V9.42 Nubia Link MD5: D492B92DD83B366508CDD74DE7D152A3
V9.40 Nubia Link MD5: D28F26289A9B75F771EF4F623F0BB367
V8.57 Nubia Link MD5: 266819d4b09c2c52aadb39e948dc84bc
V8.59 Nubia Link MD5: d7e32b7a3e833adc57fcf734aa47f5a3
V7.57 Nubia Link MD5: 81ee71869f660a28b631d871ffb59524
V7.60 Nubia Link MD5:
V9.26 Nubia Link MD5: 8997375CD97D8F7F261F21121FC8EFAA
Android 10
v6.18 Link MD5: 9AC5EA5F64835C1995E4A81D4973FB71
V6.13 Link MD5: F38ED2D7CB58252D308B29D1D4517DB9
V7.07 Link MD5: ffc3fdaf4afc522aa3a084d9275f2cb6
V7.14 Link MD5: 0f879160fbf8b556de5303207b93d0d1
V8.07 Link MD5: b30dab221be73292c5da7884afc0363f
V8.11 Link MD5: 85d9366a3017112cb68d66041e725ce6
________________________________________________________
Personal Mirror - Located in Eastern Canada
________________________________________________________
TWRP and root guide for 5S and 5G on Android 10 only - (these steps will NOT unlock your bootloader) - these steps use a bypass method to install a recovery without unlocking bootloader. the command below is to allow flashing of partitions. bootloader status is still locked during and after process is complete.
Note. if you already have ADB and fastboot drivers installed, this folder will work as is. if not I put an installer in the folder too to install a mini adb fastboot setup. which needs windows driver signing turned off (windows 8-10) this can be done by going to advanced startup and choosing to boot without driver signing.
1. Download zip file found at the end of this post
2. Extract to root of C: drive
3. open CMD prompt with admin privileges
4. CD to the ADB folder you extracted. (CD = Change Directory)
5. Connect your device in Fastboot mode (power off. hold volume down +Power until it vibrates. then release power but continue to hold volume down)
6. Once in fastboot mode, with cable connected to the computer run these commands
7. fastboot oem nubia_unlock NUBIA_NX659J (this allows you to flash the device partitions)
8. fastboot flash recovery TWRP-xxx.img (xxx being the version number of the TWRP image you choose to install)
9. fastboot flash vbmeta vbmeta_skip.img
10. reboot to recovery (from the fastboot menu) it should load TWRP
11. if TWRP does not ask you to keep recovery from being over written, go to advanced and choose disable replace TWRP. to keep TWRP as your recovery, and stop the system from re writing the stock recovery.
12. Reboot to system for the first time and complete the initial setup. this is to create the user space partitions data/media ( preferably do not make a pin or pattern at this stage)
13. once in the rom, connect to PC and copy over the Magisk zip to the internal memory. then reboot holding Volume up
14. once back into TWRP (if you created a pin during setup TWRP will ask you for your pin to access data) go into install and flash the Magisk.zip you moved in step 13 then reboot. once back into the rom, you will see a Magisk app, tap it and allow to update, the APK will install latest version of the manager.
More NOTES.
this must be done on a clean system. you need to wipe all data partitions to boot to system. re writing VBMETA causes encryption to break. until you reboot. so you lose everything Make a backup of your data partition on to your PC before doing anything.
its also recommended to have an update.zip of your current rom (which you can download from the post above), incase you need to reinstall the rom after flashing the new recovery or VBmeta.
OEM unlocking in the developer options is NOT needed. since you are not unlocking your bootloader. this step can be ignored.
I'll update this tutorial with newer steps if needed.
Thanks to those that created all these great tools.
@wzsx150 - for their version of TWRP
John Wu - for Magisk
@mslezak vbmeta_skip
If i've helped you root your device, please hit thanks.
Link ADBmini - zip updated with Magisk 21.4 zip
MD5 for ADBfastbootmini.zip: 0ad97a9ae1539b26ef78c849b169e807
I'm working on a process that will update to Android 11, through TWRP and root, without losing data. Much like a stock update.
I will update the thread once my tests are complete.
Hello. I can not flash (i cant even copy) the zip via TWRP. I see the storage device on my windows laptop. I have wipe data cache and dalvik, but it does not copy it and i can not restore my device. Help will be appreciated
josehdx said:
Hello. I can not flash (i cant even copy) the zip via TWRP. I see the storage device on my windows laptop. I have wipe data cache and dalvik, but it does not copy it and i can not restore my device. Help will be appreciated
Click to expand...
Click to collapse
Try putting update zip on a USB key and connect via OTG and flash this way. Moving files with TWRP for some reason corrupts or does not complete transfer.
Make sure to factory reset. If you're coming from a used update, backup your data partition and wipe everything. Then check to see if the partition is in fact empty. ( I noticed sometime my data partition did not erase)
Patrick Morgan said:
Try putting update zip on a USB key and connect via OTG and flash this way. Moving files with TWRP for some reason corrupts or does not complete transfer.
Make sure to factory reset. If you're coming from a used update, backup your data partition and wipe everything. Then check to see if the partition is in fact empty. ( I noticed sometime my data partition did not erase)
Click to expand...
Click to collapse
Thanks
Working fine after full data partition wipe.
I have an additioal question regarding further updates, and i would not want to open a new topic. so, after flashing the zip, i "lost" TWRP but i already have root access. I wonder if is possible to flash upcoming updates with the default recovery built in on the phone, if not, i would assume i need to install TWRP again.in any case, will side loading update make any problem with the current system? i hope my question and context is clear
As these are official ROMs, they will replace the recovery and remove root from the phone.
If you do not have root, flashing these zips from the system menu local update should work. But if you have root or TWRP it's better to flash through TWRP.
You could just flash TWRP again after flash, but I personally modify the zip and add the recovery to it to save me going into fastboot after each update.
Is it possible to install the US rom on a device with EU rom?
in the EU version I can't set the frame rate to 144 hz.
Darkvenum79 said:
Is it possible to install the US rom on a device with EU rom?
in the EU version I can't set the frame rate to 144 hz.
Click to expand...
Click to collapse
I've spoken with another EU rom user, that has the same issue before. it seems it was an error in the stock rom.
reinstalling 7.07 from the links above should fix your problem.
both 7.07 (the EU rom) and 8.07 (the US rom) are exactly the same. the only difference is the languages from what I can tell.
I have a silly question. Unfortunately i unlocked bootloader and i lost the fingerprint capability. I have tried many times to do the calibration without success. I wonder if a factory flash (EDM or any nubia tool) can restore the capability and then use this guide to do the rooting? Thanks
josehdx said:
I have a silly question. Unfortunately i unlocked bootloader and i lost the fingerprint capability. I have tried many times to do the calibration without success. I wonder if a factory flash (EDM or any nubia tool) can restore the capability and then use this guide to do the rooting? Thanks
Click to expand...
Click to collapse
No it wont.
There is a specific step by step that is required to get it functioning again. And it only survives until your next full wipe, which i assume you will do more often flashing non official roms.
I can grab the steps and edit this post for you.
Edit -
Prep.
have a black / very dark brown leather. (belt, wallet, etc)
a soft gel plaster / Bandaid
(something skin textured and in a pink / light beige colour) texture and colour are important.
First step is clear data in the infingerprint app in app info and remove permissionfor data memory - (you need to show system apps to find it)
- digit in call phone code:
*#9959#
(android 11 use Activity launcher (playstore) to enter fingerprint menu)
- uncheck performance checkbox , check only calibration checkbox
Steps -
1. Press start then wait.
2.Press next and with plaster / bandaid press on circle
3.Press next and use wallet / belt ( the display becomes black for black calibration)
4.Press next and use gel plaster / bandaid again but pinch it in so only the part with your finger touches the circle.
If you are lucky see success alert in green color
In system app in setting In-Display-Fingerprint allow access to data memory then reboot device.
Enjoy your Finger Print once more!
P.S. = do this procedure in a very dark room to improve the chances of it succeeding.
Thanks to qtr1st (Salem) and mikekrunk (Mike) for the steps and information.
josehdx said:
I have a silly question. Unfortunately i unlocked bootloader and i lost the fingerprint capability. I have tried many times to do the calibration without success. I wonder if a factory flash (EDM or any nubia tool) can restore the capability and then use this guide to do the rooting? Thanks
Click to expand...
Click to collapse
esy re-lock bootloader fingrperint work fine without calibration
---------- Post added at 12:13 PM ---------- Previous post was at 12:08 PM ----------
Patrick Morgan said:
TWRP and root guide for 5S - (these steps will NOT unlock your bootloader) - these steps use a bypass method to install a recovery without unlocking bootloader. the command below is to allow flashing of partitions. bootloader status is still locked after process is complete.
Pretty short step by step to get twrp and Magisk if you want, on your phone. (Red Magic 5S)
Note. if you already have ADB and fastboot drivers installed, this folder will work as is. if not I put a installer in the folder too to install a mini adb fastboot setup. which needs windows driver signing turned off (windows 8-10) this can be done by going to advanced startup and choosing to boot without driver signing.
1. Download zip file attached or mirrored
2. Extract to root of C: drive
3. open CMD prompt with admin privileges
4. CD to the ADB folder you extracted.
5. Connect your device in Fastboot mode (power off. hold volume down +Power until it vibrates. then release power but continue to hold volume down)
6. Once in fastboot mode, with cable connected to the computer run these commands
7. fastboot oem nubia_unlock NUBIA_NX659J (this allows you to flash the device partitions)
8. fastboot flash recovery TWRP-xxx.img (xxx being the version number of the TWRP image you choose to install)
9. fastboot flash vbmeta vbmeta_skip.img
10. reboot to recovery (from the fastboot menu) it should load TWRP
11. if TWRP does not ask you to keep recovery from being over written, go to advanced and choose disable overwrite TWRP. to keep TWRP as your recovery, and stop the system from re writing the stock recovery.
12. Magisk zips files are in the folder. copy to device and flash through twrp. and install the apk after boot. done twrp and root.
More NOTES.
this must be done on a clean system. you need to wipe all data partitions to boot to system. re writing VBMETA causes encryption to break. until you reboot. so you lose everything Make a backup of your data partition on to your PC before doing anything.
its also recommended to have a update.zip of your current rom (which you can download from the post above), incase you need to reinstall the rom after flashing the new recovery or VBmeta.
OEM unlocking in the developer options is NOT needed. since you are not unlocking your bootloader. this step can be ignored.
I'll update this tutorial with newer steps if needed.
Thanks to those that created all these great tools.
@wzsx150 - for their version of TWRP
John Wu - for Magisk
@mslezak vbmeta_skip
If i've helped you root your device, please hit thanks.
Link ADBmini
MD5 for ADBfastbootmini.zip: e49f162080c6a2124c243716546ad710
Click to expand...
Click to collapse
where is the link of twrp.img
sansha1211 said:
where is the link of twrp.img
Click to expand...
Click to collapse
Patrick Morgan said:
Link ADBmini
MD5 for ADBfastbootmini.zip: e49f162080c6a2124c243716546ad710
Click to expand...
Click to collapse
that file called Link ADBmini has all you need
Is it ok to flash Eu rom to my NA/asia rom?
After reboot it ask me for verify pin and now I can't load the TWRP.img Partition volume Full error help me please
Rai972 said:
After reboot it ask me for verify pin and now I can't load the TWRP.img Partition volume Full error help me please
Click to expand...
Click to collapse
reboot to bootloader by... power off device -> press and hold volume down and power button until you see the logo -> connect device to your computer then do the steps 7 to 12
also once you are in TWRP make sure you ... this must be done on a clean system. you need to wipe all data partitions to boot to system. re writing VBMETA causes encryption to break. until you reboot. so you lose everything Make a backup of your data partition on to your PC before doing anything.
7. fastboot oem nubia_unlock NUBIA_NX659J (this allows you to flash the device partitions)
8. fastboot flash recovery TWRP-xxx.img (xxx being the version number of the TWRP image you choose to install)
9. fastboot flash vbmeta vbmeta_skip.img
10. reboot to recovery (from the fastboot menu) it should load TWRP
11. if TWRP does not ask you to keep recovery from being over written, go to advanced and choose disable overwrite TWRP. to keep TWRP as your recovery, and stop the system from re writing the stock recovery.
12. Magisk zips files are in the folder. copy to device and flash through twrp. and install the apk after boot. done twrp and root.
Rai972 said:
After reboot it ask me for verify pin and now I can't load the TWRP.img Partition volume Full error help me please
Click to expand...
Click to collapse
if you have not removed your pin before flashing any of the roms. it asks you for YOUR own pin that you made when you setup the phone. so use your own pin.
the process of rooting your device, clears a security partition. (the VBmeta partiton)
this deletes the encryption you had on your phone. so the devices partitions are unaccessable and need to be wiped before you can boot to system.
you need to clear data. all data. then check in TWRP file browser if your data partition is clear. .. if you see folders with random letters its not been formatted correctly.
so, in the wipe menu on TWRP you should go into advanced and change the partition type to ext4 then back to f2fs to clear the partition of data.
once your phone is clear you should be able to wipe cache and davik then reboot to system for it to start like a factory reset.
sansha1211 said:
esy re-lock bootloader fingrperint work fine without calibration
---------- Post added at 12:13 PM ---------- Previous post was at 12:08 PM ----------
where is the link of twrp.img
Click to expand...
Click to collapse
How should i relock the bootloader? Via cmd, command doesn't work. Should i lock also via developer options?
josehdx said:
How should i relock the bootloader? Via cmd, command doesn't work. Should i lock also via developer options?
Click to expand...
Click to collapse
adb devices
adb reboot bootloader
fastboot devices
fastboot flashing lock
josehdx said:
How should i relock the bootloader? Via cmd, command doesn't work. Should i lock also via developer options?
Click to expand...
Click to collapse
via cmd -- fastboot flashing lock
After i reboot in TWRP and disable replace TWRP, i install magisk from a USB otg, and then i wipe all data, then i reboot system but it keeps opening TWRP in every reboot, i had to install Stock Rom to have my phone back but without root, what im doing wrong?? thanks
Edit: now it worked, tried a few times and worked don't know what failed