Database Users

Wayteq xPAD-70 and xTAB-70 ICS 4.0.3 [ROM] /older roms

Disclaimer: I am not responsible for what YOU do to your tablet...
You assume all responsibility and risk associated with flashing any ROM. Make a backup!!!
ICS 4.0.3 for our xPAD-70 (Type 1 iDx7) and xTAB-70 (Type 2 iDx7).
I must say, that these roms very fast and stable.
What's Working:
camera
touchscreen
physical buttons
wifi
audio, ringtones, notifications, alarms
microphone
root
adb
sdcard
sensors
usb host
everything
Install instruction/download links:
1. Connect the home charger to the Tablet PC. Charge the battery.
2. Download the compressed file to your PC/Laptop.
3. Create an empty folder on your desktop PC / laptop. Extract the downloaded .zip file into this empty folder.
4. Copy the four extracted files ("update.zip", "uImage_recovery", "uImage", "u-boot-512M-UartB.bin","factory_update_param.aml") to the root folder of an empty microSD card (2GB or higher). I you want to wipe and install manually, just delete the factory_update_param.aml file and boot into recovery without that.
5. Safely remove (disconnect) the microSD card.
6. Turn off the Tablet PC, but keep the home charger connected to it.
7. Insert the microSD card into the Tablet PC. After this step, don't pull out the microSD card.
8. Press and hold down the "volume up" button.
9. While holding down the "volume up" button , press and hold down the "power on" button for 6-9 seconds, and release the buttons after the last "upgrading... please wait" like messages.
Navigation inside the menu:
- Volume up and down buttons can be used to select a menu item.
- The "back" button (which is between the "home" and "menu" buttons) will activate a menu item.
10. Dont forget to hit the thanks button
Downloads:
==============
xPAD-70 (Type 1 iDx7) ICS 4.0.3 :
==============
ROM:http://www.mediafire.com/?1iqt5f1uamtrw2f
==============
xTAB-70 (Type 2 iDx7) ICS 4.0.3 :
==============
ROM: http://www.mediafire.com/?gtlqgdk33bhhtj2
===============================
ROOT packcage for ICS roms, xPAD/xTAB(apply after installig the upgrade) :http://www.mediafire.com/download.php?pfrrx7ja502qz2j
===============================
Older ROMs:
soon...
The language could be hungarian, but you can change to english with these settings:
1. Beállítások (its the hungarian word for Settings. Its in the menu) 2. Nyelv és billentyűzet (means Language and keyboard) 3. Nyelv kiválaszása (Select language) 4. Chose the English languge from that list. Thats all.
Copyright:
=========================================
[email protected]___________________
=========================================

2 links for xPAD-70 ?

murigny64 said:
2 links for xPAD-70 ?
Click to expand...
Click to collapse
Sry, i corrected, the second is the xTAB-70 ICS 4.0.3

I can't get BBC I player or Netflix to run with this rom. I get sound but no picture. Does anyone know why. Avi files run fine. Otherwise the from is very good. Been following this on the Hungarian forum but relying on google translate. Only other issue is the inertia scrolling.
Cheers carrotts
Sent from my xPAD-70 using xda premium

I have no idea about Netflix. Is seems to be working with CM nightlies. There is a XDA thread about netfix. I hope there is a solution for this.
This is the link: http://forum.xda-developers.com/showthread.php?t=1076150
The inertia scrolling fix appears in the next rom update. I hope.

cant use boot menu
Hi when i restart in boot menu i cant navigate it
When i press any button it reboots,
Anyone know if a setting needs adjusted?
As really needs updated

I got a question too....
I copied the files on SD Card but when i Press "volume Up" and "Power" Butten i get the upgrade Message and after the secon one he starts flashing but he doesnt start. i only get the waycom logo and the he reboots ....
Can someone help me?

Hello,
Do you have copy of ROM for similar device xTAB-70i ?
I am looking for Wayteq_xTAB_70i_20120620.zip.

Need new links for rom and related things

I have recently bought a HTC G1 and now ready to flush any stable custom rom like gingeryoshi or CM6 but sadly it looks like its a bit late now to ask any of these, cause all the links provided here ( I have searched nearly thoroughly) are either dead or not working any more. so now can someone guide me step by step (even the smallest steps) from the beginning that means from rooting the device to the latest andro update (gingerbread)... please is there anyone??? cause in 6 months i'm already in love with this device... with its usability... please help!
p.s - i'm a newbie, dont have any experience of rooting or anything but computer friendly enough to handle little command or this and that... so it wont be annoying...

so i've got this process... looks good... but the downoadable components were in Megaupload, that now shows FBI Warning... helpless..
I) Formatting the SD Card and Downgrading to RC29
(YOU WILL DELETE EVERYTHING OFF YOUR SD CARD!)
1. Plug your USB cable into your computer and then plug your phone in.
2. Mount your SD card by sliding down the notification bar and selecting mount.
3. Go to My Computer and access your SD card.
4. BACKUP ANY FILES THAT YOU WANT ONTO YOUR COMPUTER. VERY
IMPORTANT!
5. Go back to my computer and right click on the drive that is your sd card. Click format. Choose FAT32 from the drop down and hit the format button. This removes all data from your memory card.
6. Once the format is complete: drag and drop "DREAIMG.nbh & Update.zip files that you downloaded into the sd card. (DO NOT create a folder or anything, just put it right in the SD card)
7. Unmount your phone by going through the notification bar and then unplug your phone from your computer. Them turn off your phone.
8. Press and hold the camera+end key until until you see a screen with colored bars, then let go. This is the bootloader. The screen will turn gray with blue writing on it.
9. Hit the end key to start the update. DON'T DO ANYTHING UNTIL THIS IS DONE!
10. Once it is finished press the trackball to reboot. (If it goes back the the colored bar screen and doesn't reboot try holding the home+menu+end key, if this doesn't work, just remove the batter and put it back in and turn the phone on)
11. Once the phone is on, just turn it back off.
12. Now press the Home+End keys until you see a triangle with an exclamation point in it (this is recovery mode). Once you see this let go of the buttons.
13. Open the keyboard and press the ALT and L buttons, and then Press ALT and S buttons. Now wait until the phone reboots (it will do this automatically once the update is applied) (Don't worry if you see picture of a box and a g1 or a chip with an arrow)
14. Once the phone reboots, go ahead and and go through the welcome guide and get to the home screen.
II) Flashing a Recovery Image
1. Now with your phone at the home screen, go to settings>applications> an turn on unknown sources.
2. Now go to settings>SD card and Phone Storage>Unmount SD Card
3. Now Click format sd card and go ahead and format your sd card. It will automatically remount after.
4. Go back to the home screen and plug and mount the phone to the computer again as you did earlier.
5. Place the following files you downloaded earlier right into the sd card: FlashRec.apk, and Amon Ra's Recovery Image (Again not in any folder or anything, just on the sd card)
6. Once they are transferred go ahead and unmount and unplug your phone from the computer
7. Go and download a file manager from the android market (I suggest LINDA FILE MANAGER)
8. Once downloaded, open the file manager and go to SD card, and click the FlashRec.apk file and then click install. If it asks -> Tell it to use package installer to open it (it probably wont ask but if it does)
9. Once installed click open (it will be on bottom left of screen)
10. Then click the button that says "backup recovery image"
11. Once it says "backup complete" open the keyboard and type the following: /sdcard/recovery.img
12. Then click "flash custom recovery image" and wit until it says "Flash complete"
13. Go back to the home screen and then turn off the phone.
14. Turn the phone back on into recovery mode by holding down the home and power buttons. You will see a bunch of text on top of a black background with an HTC logo in the middle.
III) Partitioning and Loading the latest radio
1. Scroll down to "Partition SD Card"
2. Click "Partition SD"
3. Press the Home key to confirm
4. Use the trackball to increase the "swap size" to 96MB then press Home key
5. Make sure "EXT2" is set to 512 MB then Click the Home Key
6. Make sure "Fat32 size" is set to remainder and then press the Home Key and then the phone will begin partitioning.
7. Once partitioning is complete scroll down and select to "SD: ext2 to ext3" and then press the Home key. Wait for it to upgrade.
8. Once the Upgrade is complete hit the "back" button to get back to the main menu. Then scroll down and select "USB-MS Toggle" and wait for it to enable.
9. Now plug the phone into the computer again. Now transfer the files downloaded earlier: G1 Radio, G1 HardSPL, Generic G1 Rom w/ root, to the phone. (AGAIN KEEP THE FILES JUST IN THE SD CARD AND NOT IN A FOLDER OR SOMETHING)
10. Once the transfer is complete hit the Home key to disable the USB-MS toggle and return back to the main menu of recovery mode. Unplug your phone.
11. Scroll down and select "Flash .zip from SDcard"
12. Select the G1 Radio file (named OTA Radio or something like that) and hit the Home key to confirm. DO NOT SELECT ANY OTHER FILE, THE RADIO MUST BE DONE FIRST.
13. Once the Radio Flash is complete Press Home+Back to reboot the phone. It will then say "writing radio image" and then reboot back into recover mode (this will take some time)
14. Once back into recovery mode, scroll and select "Flash zip from SDcard" again.
15. This time choose the SPL file (named somthing like "Latest G1 SPL.zip") and then click the HOME KEY to confirm.
16. Once it finishes, hit HOME+Back to reboot once again. It will say "writing boot image" and then reboot
back to recovery mode.
17. Once again scroll to "Flash zip from SDCard" and choose the Generic G1 Rom file (Named something like Generic G1 Root Rom.zip) and click Home to confirm and wait for it to finish.
18. Once finished it should go back to the main menu and say"Install from SD card complete"
19. Now click on the "Reboot System Now" choice. (Home+Back)
20. Wait for the phone to reboot back into Android.
IV)Installing CYANOGENMOD 6 (Android 2.2 Froyo for HTC DREAM)
1. Once back into Android, turn the phone back off.
2. Hold the Home + power keys to turn the phone on and get it back into recovery mode
3. Select "USB-MS Toggle" and wait for it to enable
4. Once enabled, plug your phone in and transfer the CYANOGENMOD6 and GAPPS file ito your SD card/phone. (again not in any folder, just in the sd card)
5. Once the files are transferred, press the Home key to disable USB-MS Toggle and return to the main menu, and then unplug your phone.
6. Scroll down and select "wipe" and then select "wipe data / factory reset" and then hit the Home key to confirm. Wait for it to finish the wipe. It will say "Data wipe complete"
7. Hit the back key to return to the main menu.
8. Scroll and select "Flash Zip from SDCard"
9. Select the CYANOGENMOD 6 ROM Named something like "update-cm-6.0.0-DS-RC1-signed.zip" and hit Home to confirm and wait for it to finish.
10. Once finished it will go back to the main menu and say "Install from SD Card Complete"
11. Go back to "Flash Zip from SDCard"
12. Select the Gapps File Named something like "gapps-mdpi-FRF91-3-signed.zip" and click home to confirm.
13. Once it is finished you should be back at the main menu. Select "Reboot System Now" and wait for the phone to reboot.
14. The reboot will take some time, (roughly 5-10 minutes) so don't freak out. Just put your phone down and go do something =)

http://wiki.cyanogenmod.com/wiki/HTC_Dream:_Rooting
this is how to root
http://forum.xda-developers.com/showthread.php?t=668090
this will give you links to tips and understanding about android and the g1
the roms found here are all over a year old but plenty are still "good" newer roms are in the development section, usually the first 2-3pages will have most of the newest roms

There are a few good roms here and there for the G1.
Don't let the newbie reply fool you, just an old dev starting under a new name.
I would suggest:
For froyo: FroyobyLaszlo, DreamTeamFroyo
For gingerbread: ezGingerBread, CronMod, ADSMagpie

Thanks every one... after going through the rom bible for a few times i was also thinking about ezGingerBread... thanks thanks thanks for the working downloads... got all the files needed...
http://forum.xda-developers.com/showthread.php?t=882356
now i need to know status of my phone, the radio or firmware version... i'm posting whatever i could get out of my phone... will just flushing do? as mentioned in the ezgingerbread page of xda developers?
Model number: Android Dev Phone 1
firmware Version: 1.6
Basband Version: 62.50S.20.17H_2.22.19.26I
Kernel Version: 2.6.29-00479-g3c7df37 android [email protected]#19
Build number: dream_devphone-userdebug1.6 DRC8314721 test-keys

you have a developers phone so you dont need to root. but it would be a good idea to add a custom recovery and update your radio/spl. unless this has already been done. you can check by powering on while holding the camera button, write down everything on this screen
Sent from my HTC Vision using xda premium

Ok just did the camera button power up
It says
DREA*** PVT 32B
H Boot - 0.95.3000
CPLD - 4
RADIO - 2.22.19.26I
Oct 20 2008
Serial - 10

you probably still have a stock recovery, you should change this to either amonra or clockwork
you also need to upgrade your spl(hboot) to either .2005 or .2003
then you mentioned you wanted to try ezgingerbread, for this you need the 2708+ update (ram hack)
you will need to updgrade radio to .08 or .25
then upgrade spl to .13d
all the how to's are found all over these threads, search around a bit and if you get stuck just ask again. these same questions are asked weekly still so there are loads of threads with detailed instructions found everywhere
Sent from my HTC Vision using xda premium

http://forum.xda-developers.com/showthread.php?t=831139
That will give you all of the information you need to get a custom recovery and updated radio on your phone.

A Complete Thread About Upgrading Samsung Galaxy S III to Android Lollipop 5.1.1

Hello everybody! I have searched for all the topics talking about How to your S III to Lollipop 5.1.1? So i'm here today to show you the complete steps to:
I - Root your Phone.
II - Flashing the recovery Mode.
III - Installing the ROM in your device.
IIII - Enjoying the Lollipop 5.1.1
HTML:
WARNING:
-I'm not responsable for any damage can caused in your device or losing your SD Card. Everything is working fine in my device.
I - Root your phone:
Rooting your device is so easy that means to give your OS a new options contains Flashing ROMs
So to root your phone you need a PC and a software called Odin. First search on it and download it
After downloading software: to open it:
1) Right Click on the Winrar ZIP.
2) Choose "extract files" option.
3) Then you'll have a folder open it.
4) Right Click on Odion.exe (application)
5) Choose "Run as administartion".
6) The Proogram will be opened.
7) Next to complete the rest of rooting you should get the access to download in your device by :
_Click the "-" Volume button + Power Button + Home Button together for a little while.
_ Then click "+" Volume Button.
8) Now Connect your PC with your device using USB cable then wait windows installs drivers (for 10 or 20 secs) and you'll see a blue case in the left corner upper.
9) Click on "PDA" Button and search the file "CF-Root".
10) Click on "Start" button after few minutes Odin will show in the up of the bleu square "RESET!"
If everything is done like the above steps then Reboot your phone and remove the USB cable . then you'll see a new application added called "Super SU" that means your device rooted successfully
Note: if you are not seeing the "CWM" on your device that means the "ClockWorkMod" application not installed yet so you must download it by the following steps:
1) Go to the PlayStore and write in the search bar: "Rom Manger".
2) Then you'll see "Rom Manager" application download it.
II - Flashing the recovery Mode:
So after you downloadthe clockworkmodmod application now you have to install the recovery on your device to do that:
1) Open the applicaion installed.
2) Choose the first option "Flash ClockWorkMod Recovery".
3) Choose your phone's name from the list once you find it, click on it.
4) Once the installing finished, Power off your phone
_Click "+" Volume Button + Power Button + Home Button simultanity (to ckeck the result).
And now the last part of all this.
III- Installing the ROM on your device:
Note: you must have a SD Card of 2GB or more
First thing to install the ROM you need to download GAPPS (Google Apps) and the ROM
Why we are needing GAPPS?
GAPPS is the complitation of google Apps on the new ROM.
You can download them from any website
After downloading them as a Winrar ZIP on your PC copy them and past them on your SD Card. Now to flash everything and install Lollipop on your Android device:
1) Put your SD Card on your device.
2) Click on "+" Volume Button and the power button and the home button in the same time.
3) The ClockWorkMod Recovery will open
_Go to "Wipe data/cache " option and click on it by the power button, then Select YES.
_ The Same thing in "Wipe cache" option.
Currently your device is wipped or formatted
Now Flash Your ROM:
_ Go to "install ZIP from SD Card " option, Select your ROM that u installed it on your SD Card by the power button.
_then the same thing to installing GAPPS.
Once Everything is done and you see "installing complete", Reboot your system now (open your device)
Finally your device is upgrading to Lollipop 5.1.1!
So yeah! that's all, Thank you for your support and we hope this work be helpful!! :laugh:

Reb0t said:
Hello everybody! I have searched for all the topics talking about How to your S III to Lollipop 5.1.1? So i'm here today to show you the complete steps to:
I - Root your Phone.
II - Flashing the recovery Mode.
III - Installing the ROM in your device.
IIII - Enjoying the Lollipop 5.1.1
HTML:
WARNING:
-I'm not responsable for any damage can caused in your device or losing your SD Card. Everything is working fine in my device.
I - Root your phone:
Rooting your device is so easy that means to give your OS a new options contains Flashing ROMs
So to root your phone you need a PC and a software called Odin. First search on it and download it
After downloading software: to open it:
1) Right Click on the Winrar ZIP.
2) Choose "extract files" option.
3) Then you'll have a folder open it.
4) Right Click on Odion.exe (application)
5) Choose "Run as administartion".
6) The Proogram will be opened.
7) Next to complete the rest of rooting you should get the access to download in your device by :
_Click the "-" Volume button + Power Button + Home Button together for a little while.
_ Then click "+" Volume Button.
8) Now Connect your PC with your device using USB cable then wait windows installs drivers (for 10 or 20 secs) and you'll see a blue case in the left corner upper.
9) Click on "PDA" Button and search the file "CF-Root".
10) Click on "Start" button after few minutes Odin will show in the up of the bleu square "RESET!"
If everything is done like the above steps then Reboot your phone and remove the USB cable . then you'll see a new application added called "Super SU" that means your device rooted successfully
Note: if you are not seeing the "CWM" on your device that means the "ClockWorkMod" application not installed yet so you must download it by the following steps:
1) Go to the PlayStore and write in the search bar: "Rom Manger".
2) Then you'll see "Rom Manager" application download it.
II - Flashing the recovery Mode:
So after you downloadthe clockworkmodmod application now you have to install the recovery on your device to do that:
1) Open the applicaion installed.
2) Choose the first option "Flash ClockWorkMod Recovery".
3) Choose your phone's name from the list once you find it, click on it.
4) Once the installing finished, Power off your phone
_Click "+" Volume Button + Power Button + Home Button simultanity (to ckeck the result).
And now the last part of all this.
III- Installing the ROM on your device:
Note: you must have a SD Card of 2GB or more
First thing to install the ROM you need to download GAPPS (Google Apps) and the ROM
Why we are needing GAPPS?
GAPPS is the complitation of google Apps on the new ROM.
You can download them from any website
After downloading them as a Winrar ZIP on your PC copy them and past them on your SD Card. Now to flash everything and install Lollipop on your Android device:
1) Put your SD Card on your device.
2) Click on "+" Volume Button and the power button and the home button in the same time.
3) The ClockWorkMod Recovery will open
_Go to "Wipe data/cache " option and click on it by the power button, then Select YES.
_ The Same thing in "Wipe cache" option.
Currently your device is wipped or formatted
Now Flash Your ROM:
_ Go to "install ZIP from SD Card " option, Select your ROM that u installed it on your SD Card by the power button.
_then the same thing to installing GAPPS.
Once Everything is done and you see "installing complete", Reboot your system now (open your device)
Finally your device is upgrading to Lollipop 5.1.1!
So yeah! that's all, Thank you for your support and we hope this work be helpful!! :laugh:
Click to expand...
Click to collapse
Hi Thanx, where to download the ROM package from?

ukchy123 said:
Hi Thanx, where to download the ROM package from?
Click to expand...
Click to collapse
Hi, Sorry but i can't add outside links that's why i didn't put links to download. (you know XDA rules :crying: )

Lollipop ROMs
[INDEX] Galaxy S3 - ROMs, Kernels, MODs, GUIDES [19/01/16]
Look there, to find a Lollipop ROM for S3.

Yes you can find there.

Trafalgar Square said:
[INDEX] Galaxy S3 - ROMs, Kernels, MODs, GUIDES [19/01/16]
Look there, to find a Lollipop ROM for S3.
Click to expand...
Click to collapse
yes you can find in this link.

MetroPCS & T-Mobile LG Leon STABLE Root (WORKS EVERY TIME 100%)

I am making this tutorial as I have had multiple versions of the LG LTE Leon and have used many firmware versions. I have created a stable method that has the least issues as I have had trouble with the latest firmware (MS34510f) disabling my root privileges. I have created a MEGA account specifically for all of the files necessary to complete this operation and have your device run smoothly. So, please follow my instructions exactly as stated and you should not have any issues. THIS PROCESS WILL REMOVE ALL DATA NOT SYNCED, DO READ BELOW NOTES IT IS VERY BENEFICIAL
Important Notes:
+This process will wipe all data that is not synced, it is important to ensure that no newer LG process are still on the device. Some might argue to leave data, to that I say good luck keeping your root and tethering without the device becoming suspiciously unstable.
+ I am not GUARANTEEING this will work on every model, but I have had an extremely high success rate with all Leon versions.
+ In this tutorial the process in which I remove Kingroot and replace it with SuperSu is for system stability. I find that most root functions I use seem to not work properly. (Wifi Tether Router and many others). So, I do recommend doing so.
+After the new OS is installed a MetroPCS splash screen will appear even if you do have T-Mobile. DO NOT BE ALARMED this firmware will not limit any functionality you had before, it will even help with tethering functionality.
Tutorial:
Let's Begin.
1. Download the link posted to obtain required files for this tutorial
Link: https://mega.nz/#F!PM4CQRqb!92kgIOnD0ZBY-8HVbtTwGQ
2. Open up LGFlashTool2014.exe
Begin by copying settings posted below, then click "normal flash"
3. Next click the "START" button
4. At this time, I recommend you verify all sync settings are to your liking and that all personal info needed is backed up
a. You have the option to throw all of your personal documents/pictures onto your SD card and removing it appropriately
(Go to: Settings - Storage - [scroll down to] Unmount SD card)
b. Next, navigate to Settings -Backup & reset [leave options default; both checked off] - Factory data reset - reset phone
c. Once reset it will most likely reboot, wipe, and then back to a OS. Now, you will Power Off entirely (make sure it is not plugged in so it will not go to charging mode)
d. Here is where we will hold down the Volume Up button with the phone unplugged from your PC. Then you must plug the USB into your phone.
e. A black screen with white text should post onto your screen, here we will continue to step 6
note: If this screen does not appear please power off and retry step d.
6. Next, follow the posted settings. Make sure to click the "Clear phone Software update Registry" button Then click "OK"
7. A new screen will arrive, and should begin the firmware download process. At this time it will take a few minute to load and should reboot to a fresh OS.
8. With the new OS in place, you can either follow the setup tutorial now or skip through for a later setup.
note: you can now insert your SD card
9. In the tools folder of the folder you downloaded copy the "mrw" folder to the Main Storage folder of your phone
10. Now copy the Kingroot apk to your downloads folder located on the main storage.
11. Go to Settings - About Phone - Software Info
At this time click the build number box a few times until it says you are a developer
12. Hit back until you are at the Setting menu, click on Developer options and check off "Stay Awake" and "Enable OEM Unlock" as well as "USB Debugging"
13. You may now run Kingroot, if it does not install root the first time it should flawlessly install the next.
14. After root is obtained, please go to your home screen and click the "Google Search" widget. Press Update Google Services and let it run. After that has been updated search for terminal emulator and install.
note: If the Play Store is acting fishy and force closing while typing in the search bar do not fret it will be fixed after reboot in further instruction
as an allternative use the jackpal.androidterm-1.0.70-71-minAPI4.apk provided in the "tools" folder
15. Open terminal and in a new window type: Su
16. Allow root usage and at this time type: sh /storage/emulated/0/mrw/root.sh
17. It will run with a few failed messages do not worry it should open SuperSu momentarily
18. Once SuperSu opens up allow it to update binaries using the "NORMAL" option but DO NOT REBOOT YET
19. At this time either download TWRP Manager from the play store or alternatively use the com.jmz.soft.twrpmanager-7.5.1.3-82-minAPI11.apk provided in the tools folder
20. Install and open TWRP Manager. Once opened click on device name and scroll until you see "LG Leon LTE (c50)"
a. Click on Recovery Version to Install and select "twrp-2.8.7.0-c50.img"
b. next click "Install Recovery" and if prompted for verification of install path and for install version select "YES" & "NORMAL"
21. After the TWRP setup is complete it may prompt you to reboot, if not click the arrow in the top left of the TWRP Manager screen and scroll down to "Reboot" and select "Reboot device"
22. After Reboot click TWRP Manager and verify a SuperSu prompt comes up if it hasn't already before the boot
At this point the device should be running smoothly. From here I prefer to do the following steps.
My Personal Setup after new install:
+Personally I like to install use a Root Uninstaller (I use 3C Toolbox Pro) and Uninstall and Backup all MetroPCS BloatWare including the Metro Browser.
+I also access the Hidden Menu by using the Dialer and Dial "2776348*#*"
- I scroll down to ApnUnlock and click to "Unlock APN"
- Then I navigate to Settings -Tethering & networks - Mobile Networks (I check off roaming data) - Access point names
--I then select the top APN and edit APN Type to: default,supl,mms,dun
---I click save from the top right selection, then turn on and off airplane mode
+If you are and Xposed user download "xposed-v79-sdk22-arm.zip","xposed-uninstaller-20150831-arm.zip", and "XposedInstaller_3.0_alpha4.apk" from: http://forum.xda-developers.com/showthread.php?t=3034811
-install the Xposed Installer, then Go to TWRP Manager, use reboot to recovery and from there click install and navigate to the "xposed-v79-sdk22-arm.zip" and install and reboot, it will reboot with a installing screen before your home screen, takes 5 minutes.
+I also use this AMAZING app "Wifi Tether Router", it is the only tethering app I use that works consistently (if you have an unlimited data plan). I get 30mbps up and down, playing many multiplayer games off my PC and PS4 averaging ping as low as 30 ! Setting I use for our device are in a post I created here: http://forum.xda-developers.com/leon/help/unlimited-metropcs-t-mobile-tether-t3290180
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Special Thanks to:
MrW0lf from www.W0lfdroid.com for the Kingroot to SuperSU scrip
Numerous users on the XDA forums I pieced all of this information with
Fabio Grasso for making the amazing Wifi Tether Router
Team Win for being creating an awesome utility that has saved me from numerous bricks creating a stable method
Xposed and the creators of awesome additions such as Lolistat, Lucky Patcher, Max Lock, and SNAPPREFS
Any feedback? Did I do Okay? Questions? Let me know!

Mega link down
The mega link isn't working. Please fix it.

Unroot redmi 2 prime

I want to unroot my redmi 2 prime and install stock ROM. Can anyone tell me the step by step process.
Sent from my 2014818 using XDA-Developers mobile app

How to go back to stock, fully unrooted.
DISCLAIMER - PLEASE CHOOSE TO FOLLOW THIS GUIDE ONLY AT >YOUR OWN< DISCRETION AND DECISION. DON'T PLAY ANY BLAME GAMES LATER - I'M NOT INTERESTED
First Download the suitable FASTBOOT ROM and RECOVERY ROM (both) to your PC from here - (Check first whether you have just Redmi 2 or the Redmi 2 "Prime"/"Pro" version) -
http://en.miui.com/download-261.html (Stable - 7.1.3.0; developer 6.4.14)
Or just for Redmi 2 (MIUI 7 beta 6.5.12) (Redmi 2 Prime updates suspended)
Recovery
http://bigota.d.miui.com/6.5.12/miui_HM2XWCGlobal_6.5.12_238e7fded3_4.4.zip
Fastboot
http://bigota.d.miui.com/6.5.12/wt8...12_20160419.0000.19_4.4_global_19ebfb4951.tgz
0. Make sure you have a BACKUP of your current ROM ready in the external SD CARD (which has to remain inserted throughout this process).
1. Make as much a backup of your internal memory as possible. (Making it in ext. SD card is the best, fastest option, if you have that much space free in external sd card)
2. Reboot to TWRP (if you've installed, which I am guessing to be true).
3. Go into "Wipe", then slide the slider down below all the way to the right. [COLOR] (THIS WILL ALSO ERASE YOUR INTERNAL SD CARD, SO I AM ASSUMING YOU BACKED UP YOUR DATA FIRST) [/COLOR] .
4. Now come back to TWRP main menu -> "Mount".
5. Make Sure the MTP status button there shows "Disable MTP", which will mean that MTP is RIGHT NOW in an "Enabled" state. If it shows "Enable MTP", click on it until it shows "Disable MTP".
6. Now connect your Phone to your PC via USB cable, and transfer the recovery ROM which you downloaded earlier, to your external SD Card's main (ROOT) folder, don't make any sub folder. Also make sure that you don't modify the name of the file (as no spaces should be there). Else, just name it update.zip (only if you really want to XD).
7. Now, inside TWRP, go into "Wipe" -> "Advanced Wipe" -> tick "System", "Data", "Cache", "Dalvik Cache", "Internal Memory".
8. Once finished, come back to TWRP main menu.
9. Go to "Install" -> "Select Storage" -> "External SD Card" -> <selectYOURzipFILEnow>.zip
10. Let it install. It might give you error. If so, don't panic. After error, return to main menu. Remove you battery, re-insert it, then press VolumeUP+VolumeDOWN+Power. As soon as MI Logo comes back up, release the buttons. This will let you back to TWRP.
11. In case of error, keep repeating steps 7 to 9. Also, don't forget to post here, WHAT EXACTLY the error screen says.
12. When ROM finally gets installed, congrats!
If MIUI really doesn't get installed upto 3-4 tries, don't worry. Remove the battery, let the phone cool down (leave it as it is for minimum 20-30 minutes with battery taken out). After that, try again, just once more.
If, however, you're still unable to install MIUI successfully, then also don't worry, jut follow the steps 7 to 9 again, then take out your battery.
Now while your phone is cooling down, take the time to read this : http://en.miui.com/thread-126437-1-1.html and follow the steps as outlined (don't take any ROM files from there, they are older versions). Just follow there from Step 1 to 9, and you will be back.
Congratulations. Don't forget to NOT root if you want to remain "unrooted" .
JUST REMEMBER - DO NOT PANIC, NO MATTER WHAT. YOUR DEVICE IS NOT DEAD UNTIL ANY HARDWARE PART HAS RECEIVED SOME IRREPARABLE DAMAGE IN BETWEEN THIS PROCESS.