Related
Hello Guys
I need some help in flashing my device. I was going to try and flash my head unit today and tried a few things and now i cant even run the restore factory defaults. Well it runs and runs and runs and tells me not to restart the head unit but nothing happens so i switch off and on and its still good. In short i broke it.
The unit switches on and loads up fine but the wifi is all messed up i have to specify ip address to get anything to work.
My aim here is to flash to kitkat if not possible then back to factory. I managed to find this web site with firmware for my radio apparently. I cant find any instructions on how to do the update or do any kind of serial number matching or any kind of identification to avoid flashing wrong. I cannot post the link If you google kr-6206 Firmware its the first link and its by a website firmware-portal. I have registered to there site but cant find any kind of help or contact us. Even tho they say to contact them.
Radio details :
Android 4.2.2
MCU: 4.3.8-11-10-450101 WV(4.3.8, RDS, AD, BC6, Rohm37XXX, TEF662X)
System Version: 2.7.39
1.5GHZ Dual Core Cortex: A9
Ram 1GB DD3
8GB
Car DVD
GPS
TFT LCD 800*480 Screen
For SUBARU FORESTER Impreza 08-10
Bought on ebay in 2014
I realize this question must have been asked but not for this radio. If there is a good guide someone can recommend and also if someone can tell me if i can use the files i downloaded to try restore my radio to a proper working radio. Its really frustrating. I dont wanna brick the radio
Thank you for any help in advance
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
Thank you so much the king root managed to root my device. The only thing is none of those radios look just like mine. One very similar but not 100%.
The supplier from eBay sent me the software files but it dose not update android. Still stuck on 4.2.2. Im afraid to update. I need to figure out how to make a backup first before trying.
All and all the radio works now but no audio from the on board amp im guessing the power IC is fried.
Will keep you guys posted and thank you for the help
D3LTA said:
it think it's a unit based on http://4pda.ru/forum/index.php?showtopic=707069
see this thread on XDA
Think u can update to 5.3.17 MCU and Try the Navi IQ firmware it's pretty good
Click to expand...
Click to collapse
So the Agent sent me this. V2.9.5_20150513_800X480_SYSTEM_KED.rar. Its only 174.91M and contains 2 files. It did not update Android to higher version just the system version should i use the Version (2.9.1 800x480 - Most likely default software taken from AN-21U
@mxv68 - V2.9.1_20141217_800X480_SYSTEM_KED.rar) From the XDA forum will that work. Sorry to be so noob at this. First android device .
They have really not made this uncomplicated.
Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.
D3LTA said:
Try to use the navi IQ software from the 4pda forum, it's a hybrid rom.. it updates just Android so if it doesn't boot I can always go back if u have the old files.. with Phoenix suit u can make a backup.. but I didn't try it.
Click to expand...
Click to collapse
Thank you
I will only be able to check this out in a weeks time. I am going to be away. Will let you know as soon as im able to test.
Hi guys, im sorry if im asking in the wrong place but I dis not know where to start but any help is welcome.
I have just recently purchased a Seicane android 10.0 2gb ram 32g rom head unit for my 2012 Hyundai Elantra from Aliexpress.
I have not yet received my headunit however was wanting to know if there was a custom rom option available for the android 10? I see that there are many options available for previous android versions however I am yet to see any info re android 10 and custom roms/rooting options for it.
If anyone is able to point me in the right direction it would be a great help. Not sure if i can post links to the actual product but can provide a link via message if necessary
What is your head unit, details needed, is it an MTCD?
marchnz said:
What is your head unit, details needed, is it an MTCD?
Click to expand...
Click to collapse
Thanks for the reply, I am not entirely sure if it is an MTCB unit. Please have a look at the attached specs screenshot and let me know if it looks like the unit you are referring to?
isameking12 said:
Thanks for the reply, I am not entirely sure if it is an MTCB unit. Please have a look at the attached specs screenshot and let me know if it looks like the unit you are referring to?
Click to expand...
Click to collapse
Unable to ID, suggest staring with wiki in my sig.
marchnz said:
Unable to ID, suggest staring with wiki in my sig.
Click to expand...
Click to collapse
Thank you for taking the time to reply. Perhaps I will need to wait to get my hands on the unit to see if I can get some further info. For now I will do as you suggested and read through that wiki!
If anyone else has any idea or can point me in the right area, please do so
marchnz said:
Unable to ID, suggest staring with wiki in my sig.
Click to expand...
Click to collapse
Hi there myseicane h6032n android 10 has today been received and I have gone into the settings and this is about the only info i can find relating to the software/hardware info of this device. Are you able to identify the unit and root custom rom possibility?
isameking12 said:
Hi there myseicane h6032n android 10 has today been received and I have gone into the settings and this is about the only info i can find relating to the software/hardware info of this device. Are you able to identify the unit and root custom rom possibility?
Click to expand...
Click to collapse
I am not familiar as is not an MTCD device.
I'd suggest starting with the wiki and searching the forums, search for k2001
marchnz said:
I am not familiar as is not an MTCD device.
I'd suggest starting with the wiki and searching the forums, search for k2001
Click to expand...
Click to collapse
Thank you for your reply mate. I have just download cpuz and have taken some photos of the device and os info. Does this help you in anyway pointing me in the right direction or identifying if root or custom rom possible? Kind regards
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1Q9ns_Nojpl-8WAIvqgd0DMklUZJsjt7p/view?usp=drivesdk
C75 said:
Hello everyone. I received an updated Firmware directly from seicane for their head unit. This is Android 10 update for the 2/32 GB unit. Everything seems to be working great so far on unit. If you would like to try it for yourself please feel free to download and install. I'm not too tech savvy so if you have any questions I'll answer them the best I can. Thought I would share for anyone to update their own unit if possible
PLEASE BE ADVISED YOU USE THIS AT YOUR OWN RISK!
I will not be held responsible for any damages done to your own unit.
Thank you!
https://drive.google.com/file/d/1My4VMd5K270qSfEnHauErffJEOS5fSLZ/view?usp=drivesdk
Click to expand...
Click to collapse
Hi Montgomery, what did that updated firmware does that the old one doesn't? I got one 9" seicane unit and I would love to know a way that could enable the bluetooth settings so I could tinker with it and connect other gadgets.
Model&Hardware: NWD_K2101(T3)
QUAD-CORE T3 P1
PlatformVER: K20Q-2020/04/01[15:06:16]-V0.01
junilson said:
Hi Montgomery, what did that updated firmware does that the old one doesn't? I got one 9" seicane unit and I would love to know a way that could enable the bluetooth settings so I could tinker with it and connect other gadgets.
Model&Hardware: NWD_K2101(T3)
QUAD-CORE T3 P1
PlatformVER: K20Q-2020/04/01[15:06:16]-V0.01
Click to expand...
Click to collapse
I'm not sure what you are asking. You can open the Bluetooth settings if that's what you want to know.
C75 said:
I'm not sure what you are asking. You can open the Bluetooth settings if that's what you want to know.
Click to expand...
Click to collapse
The thing is, I can connect my phone to the radio unit, but I can't search for Bluetooth devices because there isn't a option for Bluetooth for it in the Android Menu.
Also the car unit doesn't run anything at background, except Maps or music app (only if it's playing something)
2/32g unit?
Thank you for the update. Question please... What do you mean by 2 unit? I have an Allwinner T3p1 k2001 Quadcore 1024x600 screen A23 Android 10 and wondering if I could use your update in case I brick mine while trying to root... Do you know if your update would be compatible with a quad core? Trying hard to find a way to root but cant find my device in twrp and super bummed no one has guided isoking with his rooting desires since I have the exact same model and MCU to the T. I appreciate any guidance you could give. Not sure which Magisk img or twrp would be ok to use for my device, all usb drivers I've tried do not work, and really want root access with Google install capability. Thank you!
These are Allwinner based on the Sunliq platform..Allwinner has locked USB debugging on these units, and there is a formal petition against them for that, they dont play clean with GPL..
Since there is no operational USB debugging, it cannot be rooted or custom recoveried for now..
Hello All.
I apologise if this is not the right place to ask this question..
I have a seicane head unit on my
2003 SL55 AMG [see link]
Can someone guide me to installing a new rom and if not, can I get android auto on this head unit..
I live in Canada and am very frustrated with the Chinese version of the android software
Link..
2001-2004 Mercedes-Benz R230 SL350 SL500 Aftermarket Radio
This android radio head unit fits to 2001 2002 2003 2004 Mercedes-Benz SL R230 SL350 SL500 SL55 SL600 SL65, supports GPS navigation, Carplay, AHD camera.
www.seicane.com
Thank you for any help
Sydsimm
I everybody, i have this model, is JUNSUN, and i want to know if its possible to root and install fcc launcher, thanks in advance.
navi91 said:
I everybody, i have this model, is JUNSUN, and i want to know if its possible to root and install fcc launcher, thanks in advance.
Click to expand...
Click to collapse
broken photo
Inviato dal mio ONEPLUS A6003 utilizzando Tapatalk
sorry now its ok
navi91 said:
I everybody, i have this model, is JUNSUN, and i want to know if its possible to root and install fcc launcher, thanks in advance.
Click to expand...
Click to collapse
You can root it, i rooted my junsun 2gb / 32gb.
Check the root instructions for the joying sc9853i, there is a manual (developer.zip).
I don't had the luck to get an update file from supplier.... but I found a matching update file for the junsun unit.
I can upload the K924B-91212 firmware which I have rooted, if you want.
tchleb said:
You can root it, i rooted my junsun 2gb / 32gb.
Check the root instructions for the joying sc9853i, there is a manual (developer.zip).
I don't had the luck to get an update file from supplier.... but I found a matching update file for the junsun unit.
I can upload the K924B-91212 firmware which I have rooted, if you want.
Click to expand...
Click to collapse
I only want root it, i'm now in android 9.0, sc9853i root joying is valid also for mine? Thanks
navi91 said:
I only want root it, i'm now in android 9.0, sc9853i root joying is valid also for mine? Thanks
Click to expand...
Click to collapse
On fake 9.0 in real it is android 8.1
For rooting you need an valid bootloader image. This you will found in the update file from the supplier. You need to patch the boot image with magisk and flash the patched image back.
tchleb said:
On fake 9.0 in real it is android 8.1
For rooting you need an valid bootloader image. This you will found in the update file from the supplier. You need to patch the boot image with magisk and flash the patched image back.
Click to expand...
Click to collapse
ops, i didn't know that:crying:, ok i will ask from the supplier, Would there be a possibility to install youtube vanced? always give me an error.
navi91 said:
ops, i didn't know that:crying:, ok i will ask from the supplier, Would there be a possibility to install youtube vanced? always give me an error.
Click to expand...
Click to collapse
It's possible to install the yt vanced. I use it on my junsun unit.
If I remember right you need to use the Legacy version. I had also problems to install it...
tchleb said:
It's possible to install the yt vanced. I use it on my junsun unit.
If I remember right you need to use the Legacy version. I had also problems to install it...
Click to expand...
Click to collapse
wuo!! legacy it's ok, thanks!!!
tchleb said:
You can root it, i rooted my junsun 2gb / 32gb.
Check the root instructions for the joying sc9853i, there is a manual (developer.zip).
I don't had the luck to get an update file from supplier.... but I found a matching update file for the junsun unit.
I can upload the K924B-91212 firmware which I have rooted, if you want.
Click to expand...
Click to collapse
Hi,
My unit is Junsun V1 Pro 4GB/64GB.
Did you manage to upgrade the firmware?
Do you know if the Joying sc9853i firmware matches Junson?
grzech666 said:
Hi,
My unit is Junsun V1 Pro 4GB/64GB.
Did you manage to upgrade the firmware?
Do you know if the Joying sc9853i firmware matches Junson?
Click to expand...
Click to collapse
No I don't upgraded my firmware, I only wanted root permissions.
Check @surfer63 post he wrote that it should possible to upgrade to joying / teyes firmware.
Before that try I would make an backup of the single partitions.
tchleb said:
No I don't upgraded my firmware, I only wanted root permissions.
Check @surfer63 post he wrote that it should possible to upgrade to joying / teyes firmware.
Before that try I would make an backup of the single partitions.
Click to expand...
Click to collapse
Hey, tchleb. That sounds interesting about the Teyes firmware. I went and saw a page for their unit. It looks like theirs comes with a front DVR cam app that also has ADAS (lane detection collision warning).
Do you know if there's somewhere I can find out more about that? I can't find any ADAS app that will let me use one of the USB DVR cams. All the ones I can find seem to be designed only for phones and want to use the built-in internal camera of a phone to work.
What's your name, by the way? I'd like to address you with something that sounds like a name. ?
I'm Stephen.
LunaEros said:
Hey, tchleb. That sounds interesting about the Teyes firmware. I went and saw a page for their unit. It looks like theirs comes with a front DVR cam app that also has ADAS (lane detection collision warning).
Do you know if there's somewhere I can find out more about that? I can't find any ADAS app that will let me use one of the USB DVR cams. All the ones I can find seem to be designed only for phones and want to use the built-in internal camera of a phone to work.
What's your name, by the way? I'd like to address you with something that sounds like a name. ?
I'm Stephen.
Click to expand...
Click to collapse
I would say 4pda is the right place for that.
I don't know if it's possible to use the ADAS App from the Teyes firmware.
Hi guys,
do you also have a bluetooth problem? I have one that I can only pair one device at a time. In addition, it happens that after pairing the phone, all contacts are lost.
I asked the seller for a new soft, he sent me ver. K989B, in theory this ver.is for Yunsun 4G 4/64, but when I compare it with ver. K924B both are identical except the config.txt file in the main folder:
K989B:
Code:
#test
sys.fyt.bluetooth_type = 1
com.fyt.android.firmare.version = 9.0
K924B:
Code:
#test
sys.fyt.bluetooth_type = 0
com.fyt.android.firmare.version = 9.0
I'm a little afraid to use the software I received.
grzech666 said:
Hi guys,
do you also have a bluetooth problem? I have one that I can only pair one device at a time. In addition, it happens that after pairing the phone, all contacts are lost.
I asked the seller for a new soft, he sent me ver. K989B, in theory this ver.is for Yunsun 4G 4/64, but when I compare it with ver. K924B both are identical except the config.txt file in the main folder:
K989B:
K924B:
I'm a little afraid to use the software I received.
Click to expand...
Click to collapse
Your both problems are common known problems, for more infos read @surfer63 faq.
Can you please post a Screenshot from your complete systeminfo here, maybe I have an update / or the same version to downgrade it if the new fw will not fit.
tchleb said:
Can you please post a Screenshot from your complete systeminfo here, maybe I have an update / or the same version to downgrade it if the new fw will not fit.
Click to expand...
Click to collapse
Thanks for helping, please find attached screenshots,
@ grzech666 Thank you very much for the firmware, the devices are identical.
Although my device is updated to date 29-2-2020, makes me think if that could be the reason for your problems with OBD contacts and connection?
continue with the problem ?.
Have you tried checking for updates through the device?.
Regards, and thank you very much.
Mine is dated 2020-04-09 and the only different I see is the Bluetooth version, 8.1.7-27_Built-in and MCU 19.12.24 13:49:27 NOR_53_L82_G23P48F64_V:1.0_FYT
OBD connection work together with phone, did not switch it on in settings.
Bluetooth contact sync did wipe out my Google contacts, I have restored them and turned off Google sync.
Bună, pozele postate sunt de calitate slabă. Nu se pot vedea specificațiile.
Pune alte poze, te rog.
Mulțumiri.
pls move this post to this thread: https://forum.xda-developers.com/t/firmware-for-mcu-mf1.4273219/
Hello Friends
I need some information about my device which is branded as "Erisin 8" ES8189C" with Android 10..
In technical detail MCU is described as MF1-PX5-......
Is there any Update to Android 11 or different ROM available..
very thankfull for hints.
Regards Big_11
Big_11 said:
pls move this post to this thread: https://forum.xda-developers.com/t/firmware-for-mcu-mf1.4273219/
Hello Friends
I need some information about my device which is branded as "Erisin 8" ES8189C" with Android 10..
In technical detail MCU is described as MF1-PX5-......
Is there any Update to Android 11 or different ROM available..
very thankfull for hints.
Regards Big_11
Click to expand...
Click to collapse
What did the reseller suggest when contacted for support
No Response......
Big_11 said:
Is there any Update to Android 11 or different ROM available..
Click to expand...
Click to collapse
From Android 10 to Android 11 would be an upgrade and no update.
Update keeps within the same API.
Just don´t even think about any upgrade.
As long as your unit works as expected and within the specs, keep it as is and don´t play around with any other ROM.
Hello everyone,
Is there someone who can give me the latest 2022 updates for :
appver:K2001N_YSJ_S212211.20190905.15541118.N0026.01
platformver:K20N-2019/08/06%5B17:27:521-1.00
BTVER: GOC_XR829 4.0/2019/07/26/18:51:20
MCUVER:V3.0-FF01-20190909-A02-CAN0000-00-00-
DVD00000000-00
Tanks!
Cioiutzu said:
Hello everyone,
Is there someone who can give me the latest 2022 updates for :
appver:K2001N_YSJ_S212211.20190905.15541118.N0026.01
platformver:K20N-2019/08/06%5B17:27:521-1.00
BTVER: GOC_XR829 4.0/2019/07/26/18:51:20
MCUVER:V3.0-FF01-20190909-A02-CAN0000-00-00-
DVD00000000-00
Tanks!
Click to expand...
Click to collapse
This is an Alwinner T3 unit. There are some dozen threads already available... Why not using first the search function in XDA? https://forum.xda-developers.com/se...c[child_nodes]=1&c[nodes][0]=4267&o=relevance
...and you should not just download something if you are not sure this is the correct one for your unit. There are a lot of units without working screen in the wild.
rigattoni said:
This is an Alwinner T3 unit. There are some dozen threads already available... Why not using first the search function in XDA? https://forum.xda-developers.com/se...c[child_nodes]=1&c[nodes][0]=4267&o=relevance
...and you should not just download something if you are not sure this is the correct one for your unit. There are a lot of units without working screen in the wild.
Click to expand...
Click to collapse
you should not just download something if you are not sure this is the correct one for your unit.....
That's why i have posted here...ma maybe there is someone with experience that can give me the links wit the updates that are for mt unit.
Cioiutzu said:
you should not just download something if you are not sure this is the correct one for your unit.....
That's why i have posted here...ma maybe there is someone with experience that can give me the links wit the updates that are for mt unit.
Click to expand...
Click to collapse
Well... If I would be you, I would contact the seller first and ask for updates.
At least to get the latest greatest to be able to roll back if something goes wrong. If you don´t have the current running firmware, don´t do anything. Keep it as is as long as you don´t have any roll back strategy.
We see too much bricked units, or after update malfunctioning, safe yourself if this is the unit you need in the car.
Just my 2 cent.