Sorry to bother you guys but figured I have tried two of the resident experts on this type of stuff with no luck, and I apologize that I am not very knowledgeable on this stuff. I totally redid my 84 Monte Carlo SS both outside and now finishing up the inside of it. While doing so I came up with the idea of having a dedicated head unit run a backup camera, air ride controls, and other accessory type of stuff. While having a second unit run the stereo and front facing DVR, I thought I was all set because it had Bluetooth and I avoided the issue of having my phone run bluetooth stereo on one while the other would be able to bluetooth for the air ride.
What I currently have is these two units, JY-UOS02N4PX5S and UK-JY-UOS01P4V. The UK-JY-UOS01P4V is the unit I was hoping to run the Ridetech air ride app on to control the air ride. But I can change how I have the two setup if it would make a difference, but think they are pretty much the same specs except that the UK-JY-UOS01P4V has fast boot which is part of the reason for choosing to run it on the accessory stuff. Thanks for your time and sorry for creating another thread but have searched through and not found anything related to my specific units. Here is a pic of the basic setup of them to mimic modern cars to a point.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
I've been looking into picking up an android headunit for my WRX and I cannot justify buying a $400+ Android auto headunit. It's just too expensive. I found the Carlaoer F-Z-701TA(https://www.aliexpress.com/item/32946430734.html?spm=a2g0o.cart.0.0.3ad33c003kBuQF&mp=1) on Aliexpress and have been really keen on getting it for it's cheap price point of $80, and it's ability to run apps. I know that since it's cheap, there may be some problems, but the reviews seem promising. I don't care for music too much as the OEM headunit is garbage anyways. What I really care for is the ability to run Torque to view information about my car while driving. It helps me to monitor my car while on the track or even on the streets to make sure everything is in good working condition. Other than that, the ability to run Spotify + Waze is another nice to have.
Yes, I could use my Cobb AccessPort (It's a datalogging/tuner tool) or use Torque on my Phone, but it's extra things that could go flying in the car on the track.
Has anyone had long term experience with the Carlaoer F-Z-701TA? Any thoughts? Should I avoid it and go for something else?
RoyFollman said:
Wow, it is very good information
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys,
I have bought this radio few months ago.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would like to change MPH for KMH somehow, it could be done by installing new software or changing launcher app as far as I know, but can't find proper files.
Also I would like to find a solution to root the system and delete Reversing Camera mode, when reversing gear on, because cutting the pink wire didn't help at all. It is connected via canbus.
ptakuwzl said:
Hello guys,
I have bought this radio few months ago.
I would like to change MPH for KMH somehow, it could be done by installing new software or changing launcher app as far as I know, but can't find proper files.
Also I would like to find a solution to root the system and delete Reversing Camera mode, when reversing gear on, because cutting the pink wire didn't help at all. It is connected via canbus.
Click to expand...
Click to collapse
Before asking people about things that are relatively new. I would suggest searching the comments in amazon. Also, play with the "settings" app. For my Chinese made version it's in settings>advanced>driving
Sent from my SM-N950U1 using Tapatalk
As a disclaimer, I am a total novice in the world of anything Android, so please have patience as I come from the Walled Garden of Cupertino. Anyway, I installed an Asvegen (the names they come up with, sheesh) branded unit in my 2015 Hyundai Genesis Coupe that I ordered from AliExpress. As far as I can tell, it is somehow related to Joying, as I can access the factory settings of the unit with with a Joying code. Getting any information from the seller/manufacturer is somewhat difficult because they are using translation software that doesn't always work right, making it difficult to understand. Also, with the time difference, I normally have to wait 12-24 hours for them to respond, in addition to 24-48 hours for an answer pertaining to a questions I have. I've searched here and tried other sources, but I've come up with nothing.
ANYWAY, this is turning into a long story.
It has, from what I can tell, an RZC Canbus decoder. They are telling me to use the IX45 Low Profile setting for the car type. I can see most of the settings for HVAC on screen, except for set temperature, which always shows 17°C, otherwise that all works. Is there any way changing a setting that I can see what temperature the HVAC is set to? And if so, can I change it to Fahrenheit, as I am a clueless American? I will include a photo of the HVAC display for reference.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good evening everyone I have recently buyed a used car (Alfa Romeo MiTo) and I found a PX6 car radio already mounted on it.
I would have some questions to ask you (I am attaching the specifications in the photo):
- On the car stereo is installed the hal9k 5.0.0 version based on android 10, I was reading on the internet that the stock 11 version was released, now my problem is that i don't know exactly who the manufacturer of the stereo is, even if only to be able to reinstall the stock and get an idea.
- I delighted in updating the MCU bringing it to the latest version available on the net looking for MCTE_LY ..... But I saw that there are also other types of "MCTD" for example or "MCTE_XX" with two other final letters; I wanted to try to understand how the nomenclature works? Are they incremental letters? Is one worth the other? Is there a better ones or a worse?
Thanks to those who answer, I think that in the meantime, understanding that '' beast '' is could help me ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello all,
I installed a chinese headunit to my car (grand cherokee 2013 with premium sound system),i had to modify the wiring harness becuase the sound system only receives the front speakers and the amplifier in the car does the rest of the work, now everything works fine except call audio in carplay because it seems to use only the line coming out of the headunit to the back speakers, call audio on bluetooth works well.
i have tried everything possible in the available settings in the headunit but no luck to make the integrated carplay to use the line of the front speakers, carplay uses a built in app called car link 2.0 which doesnt have much settings to customize it.
i am considering rooting the system to gain more access to the settings, and hopefully find a work around, the attached image is the info of the headunit, it says android 13 but actually it is 8.1, i need help rooting it and i have no experience wahtsoever in android systems.
or if there is a work around this problem without rooting it, it would be a great help, i have tried all the possible solution that show up in google search and no luck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}