good day,
im new here so excuse me if i do anything inappropriate.
so i tried to root a P8 ALE_L04 EMUI 3.1 with android 5.1
and i think i bricked it. the phone is stuck on the FASTBOOT&RESCUE MODE screen and when i reboot or press the volume + power keys it goes directly to this same screen again after the huawei logo screen.
when i run the fastboot devices command on my pc i get the following: 2d7c2ea fastboot.
SO i unlocked the bootloader and tried this method to root : youtube - How to Root the Huawei P8 Lite Android phone
i got it running and the rootchecker gave a positive but the super su binary needed to install or update, so i tried to update it and thats when my device got stuck on the fastboot&rescue screen bootloop.
is this fixable? i already have the stock kernel in the sd card:
Open source code
Version: ALE_kernel_[Android 5.1 EMUI3.1]
MD5: 7FE7EEBF48D0A475E3DB70DA44840F2A
thanks for help
UPDATE:
im downloading Huawei P8 Lite Firmware ALE-L04C567B3 to apply UPDATE.APP using adb fastboot. id still appreciate any help
HELPPPPP
Every time I reinstall the rom stock and install TWRP via odin, this message appears
"Verification failed
It is not possible to reset the unit. Health check failed. You need to reset the machine to the factory default settings. This will erase all your data "
When I re-install the ROM stock I can normally access the device (without root permission). How to get root permissions?
* Twrp-3.1.1-2-dreamlte.img latest version
* Magisk-v13.3 latest version
* No-verity-opt-encrypt-5.1 latest version
* Odin3_v3.12.7 latest version
As I see it, you are not pressing the correct key combination after flashing TWRP recovery via ODIN ( Up arrow+Bixby button+Power)
Follow the instructions here: https://www.youtube.com/watch?v=WbFDv8Ii7PM
Either that or you have a snapdragon s8 with a locked bootloader haha
I've recently repaired my Huawei P8 Lite after it's screen was mutilated and such and I decided to try flash a different ROM onto the device, I wiped my entire device and restarted it instead of flashing the ROM I needed to and I got led into a bootloop which presented me with the Huawei logo until the device just died from battery loss.
I was able to get myself into TWRP before the bootloop occured everytime the phone auto-restarted and I tried flashing the ROM which was Resurrection Remix V.6 and in the end near its installation I did notice it printed out two lines saying "Unknown command" and then continued to say it finished the installation succesfully but when I restarted my phone, there was nothing but the bootloop.
I ended up getting frustrated at left my phone on my desk untouched and now I'm presented with a Rescue Mode panel when I try to boot into TWRP to try and flash a stock ROM. The panel presents me with a message asking me to
Please update system again
Func NO : 11 (recovery image)
ERROR NO : 2 (load failed!)
I'm able to hold my power button and volume button up to boot into Huawei eRecovery but it's as useless as this phone currently. Please note I've tried methods involving connecting my phone to my PC and troubleshooting it from here but my PC does not recognize my phone at all, it never did whilst it was running the stock firmware either. Any help is gladly appreciated.
My phone model for anyone wondering : Huawei P8 Lite ALE-L02
Update :
I've managed to flash TWRP onto my device again after enough times battling the rescue mode, I no longer get the function errors however I have discovered a problem that runs deeper than just a few missing .img's. I've re-flashed Resurrection Remix again with gapps and no errors were presented within the installation processes, I rebooted my system and got put straight back into a boot loop. I decided to go back into recovery and to my surprise there's nothing inside my internal directory besides an empty TWRP folder.
I'm assuming that my device is not properly installing/saving the files where they need to be.
My device was using Oxygen OS Pie official version OTA 43 and the I got the notification for OTA 46 update.
Having an unlocked bootloader and TWRP codeworkx recovery 3.2.3-0, I removed the compatiblity.zip from the OTA, like the other times I did, and tried to flash it, which resulted into a failure. But after rebooting to bootloader and flashing the original oneplus recovery image, I tried to flash the zip again. Which also failed. I have no root, or modifications done to the system. However upon reboot I got the unlocked bootloader warning but nothing else showed up. I couldn't access the recovery nor the bootloader. Fastboot or ADB was unable to detect any device. So I was stuck with a Hard Brick.
After that I downloaded cheeseburger_23_O.13_170803 MsmDownloadTool 4.0 from the unbrick thread and followed the instructions. It completed successfully and I have stock Oneplus 5 on Oxygen OS 4.5.8 and Android 7.1.1 however system update was available to Oxygen OS 5.1.4 and I tried to install it, which failed. I unlocked the bootloader, installed twrp official 3.2.3 and tried again, which also failed with E3005: exit code 7
I tried flashing codeworkx recovery but it results into a black screen at the recovery and a continuous blue light at the LED — like when it was when Hard bricked. I don't understand what to do anymore. Also Bootloader has changed:
Product Name: QC_reference_Phone
Variant : MSM UFS
Bootloader Version: (it is blank)
Baseband Version: (also blank)
Serial Number: (present, same as what it used to be)
Secure Boot: yes
Device State : Unlocked
Did I miss something while Unbricking?
EDIT:
I don't know if something was wrong with my bootloader or unbricking, but I fixed the issue by using an updated version of unbrick tool from: Here
Some information is till missing from the bootloader screen ie. baseband version and bootloader version, but I could update to latest OTA at least.
Kj1594 said:
My device was using Oxygen OS Pie official version OTA 43 and the I got the notification for OTA 46 update.
Having an unlocked bootloader and TWRP codeworkx recovery 3.2.3-0, I removed the compatiblity.zip from the OTA, like the other times I did, and tried to flash it, which resulted into a failure. But after rebooting to bootloader and flashing the original oneplus recovery image, I tried to flash the zip again. Which also failed. I have no root, or modifications done to the system. However upon reboot I got the unlocked bootloader warning but nothing else showed up. I couldn't access the recovery nor the bootloader. Fastboot or ADB was unable to detect any device. So I was stuck with a Hard Brick.
After that I downloaded cheeseburger_23_O.13_170803 MsmDownloadTool 4.0 from the unbrick thread and followed the instructions. It completed successfully and I have stock Oneplus 5 on Oxygen OS 4.5.8 and Android 7.1.1 however system update was available to Oxygen OS 5.1.4 and I tried to install it, which failed. I unlocked the bootloader, installed twrp official 3.2.3 and tried again, which also failed with E3005: exit code 7
I tried flashing codeworkx recovery but it results into a black screen at the recovery and a continuous blue light at the LED — like when it was when Hard bricked. I don't understand what to do anymore. Also Bootloader has changed:
Product Name: QC_reference_Phone
Variant : MSM UFS
Bootloader Version: (it is blank)
Baseband Version: (also blank)
Serial Number: (present, same as what it used to be)
Secure Boot: yes
Device State : Unlocked
Did I miss something while Unbricking?
EDIT:
I don't know if something was wrong with my bootloader or unbricking, but I fixed the issue by using an updated version of unbrick tool from: Here
Some information is till missing from the bootloader screen ie. baseband version and bootloader version, but I could update to latest OTA at least.
Click to expand...
Click to collapse
try a different recovery like "Oreo" and if doesn't help then use unbrick tool
Himanshu.Shukla said:
try a different recovery like "Oreo" and if doesn't help then use unbrick tool
Click to expand...
Click to collapse
I did try to install codeworkx twrp recovery, for the Oreo build but it was giving me a hard brick, ie. A black screen and a blue LED when trying to boot to recovery. But as I said, using Unbrick tool v4.0.8 I was able to restore to Oxygen Os 5.1.7 and then everything worked fine.
I am just unsure why it didn't work with Oxygen Os 4.5.8
I mean, with a locked bootloader and a freshly installed OS, you should be able to get OTA updates, right? But the system update was failing. So maybe there was something wrong with the partitions? I don't know. The bootloader in the older Unbrick tool was different than stock. Maybe that was a fault, well, I'll never know. But all I'm saying is, newer Unbrick Tool worked wonders for me.
Hi!
I am newbies to all of these but I will try to explain.
LinkA : https://forum.xda-developers.com/nokia-5/how-to/guide-how-to-downgrade-official-oreo-to-t3746007
LinkB : https://forum.xda-developers.com/nokia-5/how-to/guide-ta-1053-downgrade-official-oreo-t3893053
LinkC : https://forum.xda-developers.com/nokia-5/how-to/root-nokia-5-android-8-1-t3831303
I have Nokia5 with android Oreo and I want to root it so I browse a lots of tutorial with zero prior knowledge and follow them.
1. I downgrade to nougat by following LinkA and LinkB <-- I use rom A02 from this guide.
2. enter download mode on my phone
3. unlock bootloader temporarily by using "Unlock Bootloader.bat" from the script mentoined in this guide LinkC
4. flash TWRP v3.2.3, v3.3.1 img files-- > I tried both but none of them work
The problem is after I flash it using "twrp flashing.bat" from the same script. I pressed power up and power button together until the phone vibrate but it just boot to the default rom that I downgraded to.
How can I boot to the newly installed TWRP recovery ?
Moreover, I can't enable USB debugging because I can't skip checking for update screen in default rom. Nokia want me to upgrade to Pie or whatever their latest version is. I tried removing sim/disconnecting wifi but it won't work. The only way I can access the phone right now is to update to Pie which is opposite to what I have been trying to do.
Edited : I tried updating as system suggested but it won't start. I am unable to use this phone now T_T
Edited 2 : I tried to flash new nb0 rom but I can't access recovery mode. It's all black. I don't know what to do now it's dead end pls help!
Anyway to fix this problem?
Thank you in advance