Database Users

Guide - How to get out of "stuck at boot animation"

Its now all over the development section where people are trying custom ROM and getting stuck at infinite bootanimation loop.
This, as explained by famous developer dhacker29, the f2fs file system is very sensitive and gets easily corrupted. This results in stuck at bootanimation.
Presenting the solution – One time, shut it all and noob friendly
Common steps
1) From your working ROM, copy all your sd card data somewhere safe (PC, pendrive etc)
2) Backup all your apps (you can use titanium back up or this http://forum.xda-developers.com/showthread.php?t=1581653)
3) Download stock firmware for all those “what if it goes wrong” issues.
4) Install drivers for Motorola devices
5) Download your favourite ROM
6) Install minimum adb and fastboot
7) Install TWRP (official support is now available)
The geek method
8) Format /system, /data and /data/media (I strictly mean format as simple wipes won’t do)
9) Now sideload your rom file
a. Advance in TWRP
b. ADB sideload and swipe to start
c. Connect to computer where you have installed drivers and adb
d. Start cmd and type adb devices – it should show your device
e. Now side load by typing adb sideload drive letter:\where\your\rom\rom.zip
10) Reboot to recovery
11) Now install ROM as normal
12) Wipe cache and dalvik and reboot
Non Geek method
8) Install stock firmware for your respective device using fastboot (there are tutorials that have the batch file which installs the firmware automatically by simply clicking the batch file)
9) Install TWRP recovery
10 ) copy ROM zip file and flash
Everyone is now requested to use the guide, help me improve it ans stop flooding dev section with same question over and over again.

Alternate Method : Noob Friendly.
First of all backup your sd card (i.e data/media)
Flash Philz Touch 6.26.6 Recovery
Hope you have OTG cable and a pendrive.
Copy the rom which you want to install on pendrive. Attach pendrive through OTG.
(backup your current rom on usbdisk. For this goto Backup and Storage. Find option backup on storage/usbdisk :good: )
Now, select Wipe Data/Factory Reset. It will ask Wipe to install new rom,tap on it. Say Yes.
After that goto Mounts and Storage and format /data and /data/media (/sdcard). Say Yes.
Done.
Now flash your favorite custom rom.
Select the option install from sdcard. Then select usbdisk. Select your custom rom and install it

this is a noob question-is a USB stick same as a pen drive ?

bublz654 said:
this is a noob question-is a USB stick same as a pen drive ?
Click to expand...
Click to collapse
yes

Wohoho..!
Oh man..!
I was one of the first people who started facing this issue...
That time, 2 months back, I couldn't figure what to do...
So, I installed Stock GB Firmware (link in my signature)..
Finally, we've got a method to fix that..
I've been away of this forum for quite a lot of time now..
Good to see such development coming in.. :good:

does anyone know a quick and easy way to copy content of SD card to somewhere ?

bublz654 said:
does anyone know a quick and easy way to copy content of SD card to somewhere ?
Click to expand...
Click to collapse
Quickest way I think is to take a USB Drive and attach it through an OTG-Cable, then use ES File Explorer to copy all things to it..
Connecting to a PC through USB takes more time due to some limitations there...
UST OTG works good.. :good:
You can use WiFi Direct maybe..

IronFistYo said:
Quickest way I think is to take a USB Drive and attach it through an OTG-Cable, then use ES File Explorer to copy all things to it..
Connecting to a PC through USB takes more time due to some limitations there...
UST OTG works good.. :good:
You can use WiFi Direct maybe..
Click to expand...
Click to collapse
OK cool ty

I just bought a 64 GB (but actually 58.86 GB when I looked in storage settings) so I'm going to try this method either tonight or tomorrow night - the alternative method as I have philz recovery installed

IronFistYo said:
Oh man..!
I was one of the first people who started facing this issue...
That time, 2 months back, I couldn't figure what to do...
So, I installed Stock GB Firmware (link in my signature)..
Finally, we've got a method to fix that..
I've been away of this forum for quite a lot of time now..
Good to see such development coming in.. :good:
Click to expand...
Click to collapse
Yeah... Lots of people were having the same problem. Sadly, most people choose to not to search before posting same issue again and again.
But i still hope this guide helps other. This should probably be sticky.

sorry for no feedback yet. I am waiting on next build of ROM as this version has a boot problem

bublz654 said:
sorry for no feedback yet. I am waiting on next build of ROM as this version has a boot problem
Click to expand...
Click to collapse
wrong thread?

abhifx said:
wrong thread?
Click to expand...
Click to collapse
I said in my previous post that I would test this guide out. but I'm waiting on next build of rom

Yup
abhifx said:
Yeah... Lots of people were having the same problem. Sadly, most people choose to not to search before posting same issue again and again.
But i still hope this guide helps other. This should probably be sticky.
Click to expand...
Click to collapse
When I searched for the issue, I found nothing on it...And I had no idea how to fix it..
I thought to make a thread about the problem but didn't had enough time in those days..
I thought someone will eventually report the problem..
I think flashing the RetailGB firmware helped because it formatted the internal memory...
#PEACE-OUT (Not in for spam.. )

Thanks for the guide bud.
Sent from my Moto G using Tapatalk

Is there a way i can mount USB storage in TWRP?
---------- Post added at 11:36 PM ---------- Previous post was at 11:27 PM ----------
Is there a way i can mount USB storage in TWRP?

ross231 said:
Is there a way i can mount USB storage in TWRP?
---------- Post added at 11:36 PM ---------- Previous post was at 11:27 PM ----------
Is there a way i can mount USB storage in TWRP?
Click to expand...
Click to collapse
Go to advanced - USB OTG - click on it.

_Drifter_ said:
Go to advanced - USB OTG - click on it.
Click to expand...
Click to collapse
I did, but nothing happened.

ross231 said:
I did, but nothing happened.
Click to expand...
Click to collapse
Click the square before ''USB OTG''.

ross231 said:
Is there a way i can mount USB storage in TWRP?
---------- Post added at 11:36 PM ---------- Previous post was at 11:27 PM ----------
Is there a way i can mount USB storage in TWRP?
Click to expand...
Click to collapse
what version of TWRP are you using? only the official version or the teamex version has OTG support

[Help] Repacking .zip file ROM into .nb0 file with heineken tool

Hello, I am trying to fix my bricked phone but I do not know how to repack the files to flash them with the OST. I have the program (crack by heineken) and the Android 7.1.1 stock ROM .zip. When I try to choose my unpacked .zip it tells "error: list not exist" and in the post where I got the tool it tells "edit files "list" of unpacked nb0 image, remove .md5 file from list". How do I create this list from my .zip file?
Thank you for your help and apologys for bothering you with such simple question but I don´t know much about this.

msdotorpeko22 said:
Hello, I am trying to fix my bricked phone but I do not know how to repack the files to flash them with the OST. I have the program (crack by heineken) and the Android 7.1.1 stock ROM .zip. When I try to choose my unpacked .zip it tells "error: list not exist" and in the post where I got the tool it tells "edit files "list" of unpacked nb0 image, remove .md5 file from list". How do I create this list from my .zip file?
Thank you for your help and apologys for bothering you with such simple question but I don´t know much about this.
Click to expand...
Click to collapse
Have you looked for official method?

Why not use a package that's already packed?

ExaHamza said:
Have you looked for official method?
Click to expand...
Click to collapse
What do you mean by this? The Nokia support did not help and their repair people can´t find the error so I do it this way because it seem to my only option.
Benderisas said:
Why not use a package that's already packed?
Click to expand...
Click to collapse
Where can I find such package? The .zip I have is all I find but if you know more I am happy to take it.

msdotorpeko22 said:
Where can I find such package? The .zip I have is all I find but if you know more I am happy to take it.
Click to expand...
Click to collapse
*easy*-*firmware*.*com*/finder.php?qseo=home/browse/file-info/id/103049/
Just delete '*'s. I am not responsible for the files that are here. You also could just google for ND1-3700-0-00WW-B03.nb0 or ND1-3320-0-00WW-B03.nb0
3320 should give you 2017 June's version, 3700 should give you state after the October's patch (the one with the RAM management bug).
Or vice versa. I assume higher number is newer version

Benderisas said:
*easy*-*firmware*.*com*/finder.php?qseo=home/browse/file-info/id/103049/
Just delete '*'s. I am not responsible for the files that are here. You also could just google for ND1-3700-0-00WW-B03.nb0 or ND1-3320-0-00WW-B03.nb0
3320 should give you 2017 June's version, 3700 should give you state after the October's patch (the one with the RAM management bug).
Or vice versa. I assume higher number is newer version
Click to expand...
Click to collapse
Ooooh! Thank you very much! I will downlaod file from easy firmware and check for virus before I install.

Benderisas said:
*easy*-*firmware*.*com*/finder.php?qseo=home/browse/file-info/id/103049/
Just delete '*'s. I am not responsible for the files that are here. You also could just google for ND1-3700-0-00WW-B03.nb0 or ND1-3320-0-00WW-B03.nb0
3320 should give you 2017 June's version, 3700 should give you state after the October's patch (the one with the RAM management bug).
Or vice versa. I assume higher number is newer version
Click to expand...
Click to collapse
BotoxNoob said:
I would suggest you to flash this nbo with OST LA. Just download and extract the archive and then you'll see the nbo rom. That worked for me. Hopefully for you too.
Good luck and have a nice day!
Click to expand...
Click to collapse
I am sorry for bothering you again, but I have run into new problem. When I start flashing process it works for short but then it says "reflashing service bootloader" and progress bar will not move anymore even after having computer and program on for one night. Before starting flashing I clicked "edit device information" and waited for error to appear and my flashing settings is "normal download; check device ap status". Do you know what do to?

BotoxNoob said:
What do you mean with "flashing settings"? I could send you a video tutorial how to unbrick your phone. Here is the link. Follow the guide. It's very simple. Hopefully I could help you and please tell me, where you can set up the "flashing settings".
Thanks
BotoxNoob
Click to expand...
Click to collapse
My version of OST is 6.1.2 and it has options to choose between choosing file and the process starting. The settings I have are the default choosed by the program itself when you run it.

BotoxNoob said:
OST 6.1.2 doesn't work. You have to use OST 6.0.4. I think, that's the problem. Please report me the result and good luck.
Click to expand...
Click to collapse
With the OST version 6.0.4. it get stuck on "flashing partition: ABOOT" then it stops and tells;
error code: 0xc6da
error: download fails
error=se_er_adb_cmd_get_fail_ result (0xc6da)
Again I am sorry if this is easy to fix problem and I am just stupid.

BotoxNoob said:
Have you the latest Platform Tools installed?
But you're on the right way
I hope, we will fix your problem
Click to expand...
Click to collapse
I have downloaded this too. But what I have to do with it?

BotoxNoob said:
Go to "C:/adb" and then drag all the files from the platform tools.zip in the "C:/adb" directory. Overwrite the files if you get asked.
Now, please try flashing with OST again.
Click to expand...
Click to collapse
I had to make adb fodler myself but it still tells me same error.

BotoxNoob said:
OK. Please delete the "C:/adb" folder. I'll send you an other reply, and then it should work.
---------- Post added at 10:41 PM ---------- Previous post was at 10:36 PM ----------
But please wait a few minutes/hours.
---------- Post added 17th October 2018 at 12:39 AM ---------- Previous post was 16th October 2018 at 11:41 PM ----------
Hello,
I hope this will finally fix your problem.
Make shure, you've deleted the "C:/adb" folder.
Let's start
First of all, download the 15 seconds adb installer.
Execute it and always press "Y" and confirm everything.
Once you've done that, download the latest "Platform Tools" (for windows).
After downloading, extract the archive. Now drag all the files from the "platform-tools_r28.0.1-windows" directory to the "C:/adb" directory. Overwrite all files if you get asked.
Now, boot your phone in "Download Mode" and connect it to your PC.
Open OST 6.0.2, click "Edit Phone Information", wait until it's done and then flash the nbo rom to your device.
If that does'nt work, I could help you via TeamViewer.
But no matter, good luck and report me the result.
~BotoxNoob/Sebi
---------- Post added at 12:42 AM ---------- Previous post was at 12:39 AM ----------
Otherwise, try to follow this video tutorial.
Click to expand...
Click to collapse
There still is same error as always. Problem is my phone does not boot so I can not change setting for USB debugging. But now I have ADB program installed and I can wipe partition with if it corrupted, no?

BotoxNoob said:
Do you mean that USB Debugging is not enabled?
Click to expand...
Click to collapse
No. I never used it before phone stopped working so I never turned on.
Also, it start in downlaod mode when I plug it to PC.
And how can you not delete files by external access when device is turned off? This sounds like bad joke.

BotoxNoob said:
The problem is, for flashing partitions, you need an unlocked bootloader. But there's no official (and no free unofficial) way to unlock the bootloader on the Nokia 5. It's not a bad joke.
Click to expand...
Click to collapse
Think about windows doing this. After BSOD/crash/update error, for whatever reason, PC does not boot so you want to enter BIOS but it tells you to log in the administrator account. But you can not log in because all you can reach is POST screen (the black with the cpu and hardware information written). Would that not be stupid?
Also, you mentioned unofficial way? Nokia repair people did not find problem so this looks like only way for me. Can you tell me more?

BotoxNoob said:
....
That costs 5$. So, do you really want to buy this unlock file? I can't guarantee that this will help you.
Click to expand...
Click to collapse
The way you say it sound like ripoff... First I will ask coworkers if they know something. See, I work for computer service (windows, macintosh, linux) but I never work with android. Now I see why...

BotoxNoob said:
I'm so tired, that I couldn't help you. But the steps I told you worked for me. I'm so sorry
Click to expand...
Click to collapse
It is not your fault android has **** security features that not make sense. Thank you for tips anyway.

Hello mate, did you fix your problem?

Got a Zip with a firmware update but it wont install on startup

Hi!
So after some back-and-forth with the not so smooth support from the seller of my Hizpo unit (Android10, Octacore, 4/64GB) I got an updatefile (zip). The instruction is to put it on an SD-card or USB-stick in the unit and then restart and it should update. But when I do this nothing happens.
There´s an option to do updates from the system menu which I have tried. Looks like something is updating then but after doing this I´m still on same versions ov MCU etc.
So am I doing something wront with the SD/USB and restart-method? Is there a setting somewhere that can make it work?
And: the seller says "power off and then on". But since the unit is mounted it has power all the time, right? Does this maybe mean I have to physically disconnect the power wires?
Thanks in advance for any help!

I bet if you unzip the file you will see a file with an .IMG extension. If you place this file on the ad card it will update.
Sent from my SM-N950U using Tapatalk

comptechltd said:
I bet if you unzip the file you will see a file with an .IMG extension. If you place this file on the ad card it will update.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
Thanks for replying!
This is the content of the zip file. But the instructions that I got clearly stated that I should put the Zip in it´s packed form on the SD-card....

Tuborg68 said:
Thanks for replying!
This is the content of the zip file. But the instructions that I got clearly stated that I should put the Zip in it´s packed form on the SD-card....
Click to expand...
Click to collapse
Rename the zip file to "update.zip", or "kupdate.zip".
Don´t unzip, just format the SD/USB stick and copy the files on it. Try both on the stick/SD.

rigattoni said:
Rename the zip file to "update.zip", or "kupdate.zip".
Don´t unzip, just format the SD/USB stick and copy the files on it. Try both on the stick/SD.
Click to expand...
Click to collapse
Thanks! Will try that:good:

And one stupid question: how do I power this unit off/on to initiate the update? If I understand right it still has power when I turn off the ignition key.
There is a reboot-button in the status bar menu, should I use that?

Tuborg68 said:
And one stupid question: how do I power this unit off/on to initiate the update? If I understand right it still has power when I turn off the ignition key.
There is a reboot-button in the status bar menu, should I use that?
Click to expand...
Click to collapse
Just switch ignition off and wait until the unit is down.
Alternative the fastest version is to use the reset button.

rigattoni said:
Just switch ignition off and wait until the unit is down.
Alternative the fastest version is to use the reset button.
Click to expand...
Click to collapse
Yup, now I feel really stupid

Tuborg68 said:
Yup, now I feel really stupid
Click to expand...
Click to collapse
You just don´t want to do something wrong... so it´s okay to ask before you do anything which cannot be repaired.
There are no stupid questions at all... wait... there are some, but not yours in the moment.

May help you
I saw my seller using a flash stick to update my unit
He went to factory car setting in the unit then used ( 16176699 passwords for extra setting menu )
Then he clicked on factory setting update and the file name was (data.zip)
And he activated one option ( reset to default )
After the update, the unit restarted itself automatically
Hope that can help in something
FYI, the password may vary depending on ur unit, but from what I saw it's so similar to the one I have
Good luck
---------- Post added at 05:03 PM ---------- Previous post was at 04:23 PM ----------
I found some information may help you more
****
After entering the engineering menu with a password of 16176699 instead of 1617 in itappearadvanced settings, like Style setting.Password there111333. Change the setting to 1,2,3,4changes the look of a native launcher;
Log in to the engineering menu of the Factory settingpassword1617 or, sometimes, forlarger numbersavailable settings 16176699. On some new PG password to enter the factory settings66668888. More possibleoption with 3368 and not only, still8888.
****

YT9213AJ Latest Firmware XYAUTO 6.5 API 27/Android 8.1 2020 + TWRP Magisk and Dolby

To avoid people getting frustrated I have decided to end this project on my side, follow this link to receive active updates from a guy that has time. Cheers https://forum.xda-developers.com/t/...-custom-mods-root-twrp-viper4android.4184999/

which is recommended? 6.0 rom or upgrade to 8.0?

Is it installable on a yt9216b 1/16 with firmware 8.1 go?
thx

septicide said:
I have had a massive headache getting this to all work but am glad to have found a solution, these units come shipped with a fake android 8.1 (some say 9.1) and are actually android 6.0, all XYAUTO builds from 3.0-3.4 will be android 6.0
DOWNLOAD LINK - https://drive.google.com/file/d/1hLDcyTHxSvI6LzuV6D7C28-qhpYEMk-A/view?usp=sharing
This update is real android 8.1 even though it comes up as 9.1 after you install it
The update fixes a number of things, the volume glitch between 17 and 18, and the fader on some models, if your one doesn't have an audio processor chip the fader will not work, more info here https://4pda.ru/forum/index.php?showtopic=985184
It also includes a theme chooser.
This 7.zip contains a computer only flash with TWRP recovery already included
-- Instructions --
Copy all files from "Needed" folder to a USB
Unzip firmware and flashtool
Use flashtool to flash firmware - Open scatter file - Select "Format + Download" From drop down menu
Hit download, connect USB A TO A Cable, then power on the device and let it flash, should come up OK
-- Bootloader Check --
Car Settings - Android Settings - Go to Settings - Scroll down to System - About Car
Tap Build Number to enable developer mode - Back
Developer options - OEM Unlocking - Make sure this is Enabled
-- Gain Root and install ViPER4Android FX/Dolby --
Plug in your USB Stick
Open file manager and open USB Drive
Install Android Terminal Emulator
type in: Reboot Recovery - Enter
Change Language to English, *tip* the option is настройки then globe on the top right
Install - Select Storage - Usb OTG
** In this Order **
Select Magisk-v20.4.zip
Add zip
Select ViPER4Android_2.5.0.5.zip
Add zip
Select WICKED BEATS.zip
Add zip
Select Busybox-1.29.0-YDS-UNIVERSAL.zip
Add zip
Select Dolby-Oreo.zip (Only if you want it, NOTE will replace the built in eq so the one in settings won't display)
Swipe to install
Go back
Select Wipe - Factory Reset
Reboot ** Dont install TWRP updater app this is a custom recovery and the only one you will ever get **
Connect to WIFI
Install MagiskManager and perform the additional setup when it loads
After reboot, open MagiskManager and make sure Magisk is detected if not power off/on device and check
again, boot back into recovery and reinstall Magisk zip if it's still not working after that set OEM Unlocking to disabled in Developer options, reboot and recheck, this glitch is to do with the bootloader not enabling magisk. Once you have ViPER4Android installed even if this does decide to intermittantly not enable root in the future the FX will still work as it only needs root access to install the driver initially.
Open viPER4Android FX, turn on master power and check driver status, should be working.
-- Set up side buttons --
Car Settings - Factory Settings - 8888 - Touch Settings
In this order
Start
Power - Power Button
Home - Home Button
Back - Back Button
Voladd - Vol+
Voldec - Vol-
Close - Ok
Video of it running here: https://drive.google.com/file/d/1BWF1bpNYTo69MekuDDuHXj3cCZHxbr_r/view?usp=sharing
Click to expand...
Click to collapse
Thank you for sharing good instruction.
One question for you. Are your fader and equalizer working properly? Mines aren't. However, for Equalizer, Dolby could be a good alternative but for fader, there is no alternative in my knowledge. Any idea?

jheum said:
Thank you for sharing good instruction.
One question for you. Are your fader and equalizer working properly? Mines aren't. However, for Equalizer, Dolby could be a good alternative but for fader, there is no alternative in my knowledge. Any idea?
Click to expand...
Click to collapse
Hey mate, The fader won't work if the DSP chip is missing from the board, also once you install dolby the right left front and rear fader stop working as it replaces the audio eq, I'm trying to find a solution to this at the moment but without that chip I doubt it.

g2mantap said:
which is recommended? 6.0 rom or upgrade to 8.0?
Click to expand...
Click to collapse
The 6.0 rom here https://forum.xda-developers.com/t/...ecovery-custom-mod-root-twrp-viperfx.4184999/ is faster, but you can only use viper fx, the 8.1 one I have posted is slightly slower due to the android revision and allows you to use dolby.

mark-1978 said:
Is it installable on a yt9216b 1/16 with firmware 8.1 go?
thx
Click to expand...
Click to collapse
No, but you can download the firmware here http://file.xygala.com/?dir=uploads/XY公版/9216/9216B/Android9.1/外文/横屏/ user/pass is xyauto:123456 extract it, then copy the preloader.bin and recovery.img from my archive over to this folder and flash it following the same instructions above. Just check what display size you have first under car settings and download the right one cheers.

Thank you for your reply and kind pictures. I confirmed mine doesn't have a DSP.. Haven't expected a car stereo without fader.. Anyway, problem solved.

My unit looks exactly like this but the number on mine is YT9213A without the last 'J'. Do you know if this would work on my unit? Any clue what difference the final J makes?

buffaloquinn said:
My unit looks exactly like this but the number on mine is YT9213A without the last 'J'. Do you know if this would work on my unit? Any clue what difference the final J makes?
Click to expand...
Click to collapse
No, but you can download the firmware here http://file.xygala.com/?dir=uploads/XY公版/9213/9213A/安卓9.1/外文/横屏/1024X600/ui1_v6.5 user/pass is xyauto:123456 extract it, then copy the preloader.bin and recovery.img from my archive over to this folder and flash it following the same instructions above.

septicide said:
No, but you can download the firmware here http://file.xygala.com/?dir=uploads/XY公版/9213/9213A/安卓9.1/外文/横屏/1024X600/ui1_v6.5 user/pass is xyauto:123456 extract it, then copy the preloader.bin and recovery.img from my archive over to this folder and flash it following the same instructions above.
Click to expand...
Click to collapse
Thanks.

buffaloquinn said:
Thanks.
Click to expand...
Click to collapse
Seems there are two zips in that folder. Both have the same last part of the file name, but one is preceded by some Chinese characters and they're different sizes. any clue which one I'm supposed to use?

septicide said:
** Update ** Getting Viper to work without removing system fader etc was put in the too hard basket for this version they are still in the
Click to expand...
Click to collapse
@septicide - I have this unit, see photos. YT9213A unit, 8227L, fake 2gb (1gb actual), 32gb storage. Can I use your ROM?

buffaloquinn said:
Seems there are two zips in that folder. Both have the same last part of the file name, but one is preceded by some Chinese characters and they're different sizes. any clue which one I'm supposed to use?
Click to expand...
Click to collapse
Right click and translate to english, you want the first one, computer upgrade package

PaulieP said:
@septicide - I have this unit, see photos. YT9213A unit, 8227L, fake 2gb (1gb actual), 32gb storage. Can I use your ROM?
Click to expand...
Click to collapse
Hey man you will be after the same one as buffaloquinn above, just unzip the rom and overwrite the preloader.bin and recovery.img from my image before you flash so you get twrp

septicide said:
No, but you can download the firmware here http://file.xygala.com/?dir=uploads/XY公版/9216/9216B/Android9.1/外文/横屏/ user/pass is xyauto:123456 extract it, then copy the preloader.bin and recovery.img from my archive over to this folder and flash it following the same instructions above. Just check what display size you have first under car settings and download the right one cheers.
Click to expand...
Click to collapse
Hi,
Thank you very much for the post. I have tried to install it by downloading the file for Y9216B and when I try to flash it by choosing the scatter file it always gives me an error and says that it is invalid. What could be the problem?
Thank you

acristobalj said:
Hi,
Thank you very much for the post. I have tried to install it by downloading the file for Y9216B and when I try to flash it by choosing the scatter file it always gives me an error and says that it is invalid. What could be the problem?
Thank you
Click to expand...
Click to collapse
Chinese characters in the directory name, just rename it to firmware or something and the scatter file should work

Hello, and happy new year to all. i have a car Ownice k1 1GB ram 16GB disk, can you upgrade with your rom? I attach photos

Not having any luck here. Reseting or rebooting (including from completely disconnected from power unit) never seems to recognize my computer connected via USB cable. (Checked with both USB ports as well)
Is there some trick to getting the unit into download mode?

septicide said:
Right click and translate to english, you want the first one, computer upgrade package
Click to expand...
Click to collapse
Thanks. I did figure that out because it was the only one with the scatter file. Still not having any luck with getting the unit into download mode.

Help Requested: Bought a TS10. Sub Pre-out stopped working after S/W Update to TS10.2.2_20230311.103922

Greetings!
I bought a radio for my car. Everything was working out of the box yesterday. I did a S/W update this morning and updated to TS10.2.2_20230311.103922 this morning. As soon as I did that, the sub pre-outs went completely dead. I did test my amp and everything downstream is getting power. I don't know what happened. The update was successful. I don't know what the previous software version was before updating.
I have no idea how to fix this. What should I do?

Hi, request an update offline from your seller (install thru USB stick) or go to factory settings menu and restore original software - downgrade (this will delete all files and folders created after first use and put clean install)

Duplicate post.

Anton TNT said:
Hi, request an update offline from your seller (install thru USB stick) or go to factory settings menu and restore original software - downgrade (this will delete all files and folders created after first use and put clean install)
Click to expand...
Click to collapse
The seller told me not to perform a factory reset because it'll delete the APK and map files. How would I get those back?
Update: I performed the factory update. I found the "APK Installer" on the radio. I was able to install TLlink, and a few other ones.
Thank you!

marker227 said:
The seller told me not to perform a factory reset because it'll delete the APK and map files. How would I get those back?
Update: I performed the factory update. I found the "APK Installer" on the radio. I was able to install TLlink, and a few other ones.
Thank you!
Click to expand...
Click to collapse
Is it working all well now ?

Anton TNT said:
Is it working all well now ?
Click to expand...
Click to collapse
Actually no. It's so much much worse. The headlight illumination wire never worked (before or after update). And now the sub pre-outs do not work in TLink. They do work in Bluetooth or the Radio. That's it. I worked on the car for 3 hours last night. I did numerous factory resets. I can't get it to work right.

Please post here info on system - HMI and MCU take a picture and whole device also. Must know what we are dealing with here.
We will find solution, we always do...
Meanwhile this thread will also help things sort out ... https://forum.xda-developers.com/t/new-ts10-uis7862-6gb-ram-128gb-head-unit-q-as.4227947/page-91

Anton TNT said:
Please post here info on system - HMI and MCU take a picture and whole device also. Must know what we are dealing with here.
We will find solution, we always do...
Meanwhile this thread will also help things sort out ... https://forum.xda-developers.com/t/new-ts10-uis7862-6gb-ram-128gb-head-unit-q-as.4227947/page-91
Click to expand...
Click to collapse
Thank you! I can let you know this information tomorrow! I don't have access to the car right now. The radio was from AliExpress. I'm on Android 10. The radio is called the T9 version. I did post on that Q&A post too.
I had issues where the amp remote wire was not being turned on by the radio (power cycle with a paperclip fixed that).
Now I'm having issues with the sub not providing any audio while using TLlink. The speakers even sound really awful when using TLlink.
I also accidentally flipped the boot logo screen for the Android logo. Not sure how to put it back the way it was...
The seller did give me this file: "TS10.2.2_20230311.103922_THEME1-11.rar" I'm not exactly confident this will do anything when the Factory Reset didn't.

marker227 said:
Thank you! I can let you know this information tomorrow! I don't have access to the car right now. The radio was from AliExpress. I'm on Android 10. The radio is called the T9 version. I did post on that Q&A post too.
I had issues where the amp remote wire was not being turned on by the radio (power cycle with a paperclip fixed that).
Now I'm having issues with the sub not providing any audio while using TLlink. The speakers even sound really awful when using TLlink.
I also accidentally flipped the boot logo screen for the Android logo. Not sure how to put it back the way it was...
The seller did give me this file: "TS10.2.2_20230311.103922_THEME1-11.rar" I'm not exactly confident this will do anything when the Factory Reset didn't.
Click to expand...
Click to collapse
Please send me this file TS10.2.2_20230311.103922_THEME1-11.rar on email [email protected].
Will try out with my unit I have TS18.
It has obviously theme pack for changing theme or UI of device.
Boot logo is minimal concern. Boot logo can be changed in factory settings mode (access with pin code ussualy 8888 or 126 or 123456).
Please do also :
Paste here also link of Ali Express where you bought device just to see some further info on device.
Take a snapshot of units UI (main interface with icons in Android).
Specify what brand is it - like Topway, Isudar, Mekede, Joying or something like that.

Anton TNT said:
Please send me this file TS10.2.2_20230311.103922_THEME1-11.rar on email [email protected].
Will try out with my unit I have TS18.
It has obviously theme pack for changing theme or UI of device.
Boot logo is minimal concern. Boot logo can be changed in factory settings mode (access with pin code ussualy 8888 or 126 or 123456).
Please do also :
Paste here also link of Ali Express where you bought device just to see some further info on device.
Take a snapshot of units UI (main interface with icons in Android).
Specify what brand is it - like Topway, Isudar, Mekede, Joying or something like that.
Click to expand...
Click to collapse
I sent you an email with a link containing the .rar file the seller gave me. It is the current software version for the radio. I asked them to provide me with the original firmware file they send with the radio as well. I'll get that tomorrow.
Here is the photo you requested.
It is running Android 10. Although, it's supposed to be Android 11. I don't have canbus on my vehicle or a factory digital amp.
I tried plugging my phone into the USB plug in the back of the radio. It didn't connect to the radio. It briefly was charging, but I was unable to use Android Auto using the wired method. I don't have the car's factory USB plug hooked up right now. I'll be doing that on Saturday. Is it possible the rear USB plugs don't provide data to the radio? The rear USB plug is 6-pin. The car's factory front plug is 4-pin.
https://www.aliexpress.us/item/3256802326561600.html?spm=a2g0o.order_list.order_list_main.17.ccc01802QkG7Tx&gatewayAdapt=glo2usa&_randl_shipto=US

Did you get any canbus box with device ?
If yes, is it readable / visible in system settings (factory settings)?

Anton TNT said:
Did you get any canbus box with device ?
If yes, is it readable / visible in system settings (factory settings)?
Click to expand...
Click to collapse
No I did not. Since my car does not have the upgraded audio system, no canbus was needed. I was not given one.

Your file that you have sent me... It is update for unit , go to in system update where you updated software and choose not online but "local" update and then choose USB (ZIP file - files must be unzipped on formatted USB drive and attched to port prior to hit update). Let it finish and then see if helped. If not I'm looking for same update on net, we have similar device I have TS18 yours is TS10.
There is a link to help if get stuck...

Anton TNT said:
Your file that you have sent me... It is update for unit , go to in system update where you updated software and choose not online but "local" update and then choose USB (ZIP file - files must be unzipped on formatted USB drive and attched to port prior to hit update). Let it finish and then see if helped. If not I'm looking for same update on net, we have similar device I have TS18 yours is TS10.
There is a link to help if get stuck...
Click to expand...
Click to collapse
How do I send the file to the unit? The 6-pin USB port does not detect my phone. My phone briefly detects power and then it goes off.

marker227 said:
How do I send the file to the unit? The 6-pin USB port does not detect my phone. My phone briefly detects power and then it goes off.
Click to expand...
Click to collapse
Send file to USB drive on a cmputer rather than from phone. Send this zip file to a computer via mobile phone bluetooth or cable connection unzipp the files, then transfer files to formatted USB drive, attach it to USB port on head unit, go to system settings and choose local update / USB and it should start the update. It is best method.

Anton TNT said:
Send file to USB drive on a cmputer rather than from phone. Send this zip file to a computer via mobile phone bluetooth or cable connection unzipp the files, then transfer files to formatted USB drive, attach it to USB port on head unit, go to system settings and choose local update / USB and it should start the update. It is best method.
Click to expand...
Click to collapse
I have USB drives at home. I can do this in about 6 hours.

marker227 said:
I have USB drives at home. I can do this in about 6 hours.
Click to expand...
Click to collapse
Go ahead no need to hurry, it's late.. You can tell me if you succeded tommorow... Good luck!

Original update is here but it's from year 2021... use as a last resort, I have not tested it.
https://forum.xda-developers.com/t/...am-128gb-head-unit-q-as.4227947/post-84743245
Method of installment, same as update above from USB and local update

I put the RAR file on a USB stick. How do I apply the update?
I'm unzipping the files... Trying again.

Anton TNT said:
Original update is here but it's from year 2021... use as a last resort, I have not tested it.
https://forum.xda-developers.com/t/...am-128gb-head-unit-q-as.4227947/post-84743245
Method of installment, same as update above from USB and local update
Click to expand...
Click to collapse
Performing the update now. Am I supposed to check the "Wipe data and format flash button?" I didn't check it.
I finished the update. It didn't do anything. My subwoofer is still broken and none of my settings were wiped.
I tried the update again and I clicked the "Wipe Data" button. Same result.
I do have the original file the seller gave me. It's the older firmware version. I haven't tried that, but I'm getting annoyed at this point. I thought a flash was going to completely wipe the radio, including the crooked boot logo I accidentally flipped.
This is the oldest file the seller gave me. I haven't tried it yet.
TS10.2.2_20230210.093416_THEME1-11.rar