Database Users

gravitybox on lenevo a6000 plus

I have rooted my phone and installed xposed framework in it.i am not in a mood to use custom roms so i am working on stock lolipop. i want to install gravity box in it. But i am not sure it will work or not. Can anyone tell whether this module is suitable for stock lollipop rom. Thank you in anticipation.

Its is suitable
Though some of the options for status bar may not work

The Hard Gamer said:
Its is suitable
Though some of the options for status bar may not work
Click to expand...
Click to collapse
Thank you but can you please share special requirements if any . Like version of GB or Xposed framework for this particular model so that it doesn't not end up in bricking.

sainivijay said:
Thank you but can you please share special requirements if any . Like version of GB or Xposed framework for this particular model so that it doesn't not end up in bricking.
Click to expand...
Click to collapse
There is nothing particular for any particular model
Just flash xposed according to version of your rom and install latest apk of GB
And dont ask for links
-_-

The Hard Gamer said:
There is nothing particular for any particular model
Just flash xposed according to version of your rom and install latest apk of GB
And dont ask for links
-_-
Click to expand...
Click to collapse
I don't need links..i have flashed xposed ..i was worried just because i read somewhere that it doesn't work on lenevo phones because its rom is highly modified by manufacturer... So i wanted to confirm..

sainivijay said:
I don't need links..i have flashed xposed ..i was worried just because i read somewhere that it doesn't work on lenevo phones because its rom is highly modified by manufacturer... So i wanted to confirm..
Click to expand...
Click to collapse
Just give it a try

The Hard Gamer said:
Just give it a try
Click to expand...
Click to collapse
Ohk dude..thank you again..i hope it will work

Latest Magisk - feedback

Just wanted to check who have 14.3 and manager v5.4.0. installed and running on Honor8.
1 - What is the ROM version you're using?
2 - Is SuperSU working OK?
3 - Is Magisk hide working?
4 - Is any module not working?
Thanks in advance.

zinko_pt said:
Just wanted to check who have 14.3 and manager v5.4.0. installed and running on Honor8.
1 - What is the ROM version you're using?
2 - Is SuperSU working OK?
3 - Is Magisk hide working?
4 - Is any module not working?
Thanks in advance.
Click to expand...
Click to collapse
I have.
1: EMUI 5.0.1 (B394)
2: Yes it is.
3: yes it works for me an the apps I have.
4: Don't know, only use 2 modules. (Emoji and Smali)

zimmen said:
I have.
1: EMUI 5.0.1 (B394)
2: Yes it is.
3: yes it works for me an the apps I have.
4: Don't know, only use 2 modules. (Emoji and Smali)
Click to expand...
Click to collapse
Thank you.
I forgot to ask about SafetyNet. Is Magisk passing it?

zimmen said:
I have.
1: EMUI 5.0.1 (B394)
2: Yes it is.
3: yes it works for me an the apps I have.
4: Don't know, only use 2 modules. (Emoji and Smali)
Click to expand...
Click to collapse
3 - Which apps do you use that need Magisk hide?

1. EMUI 5.0.1 (FRD-L14 B389)
2. Yes
3. Yes - I can use a financial app for work that isn't suppose to work with root
4. No (Viper4 Android and Emoji is all I am using currently however).

1 - FRD-09 B394
2 - Yes
3 - No (Android Pay & Homebanking)
4 - No modules
5 - No SafetyNet pass

Just wanted to ask if magisk works with the stock kernel or do I have to flash a custom one?
EDIT: nvm it worked

Good to know. My banking app would normally refuse to work on other phones I've owned. I'd be curious to know if the pay apps like Samsung Pay or Android Pay would still work.

Magisk works with stock kernel prior to B394. Haven't tested with B399. But Magisk hide function is required.

Thread closed

This thread is closed due to violation of protocol

I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD

Steps to install?
I've tried installing with pixel experience (treble), gave me a bootloop.

cichowlasp said:
I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD
Click to expand...
Click to collapse
Is it has any bugs??? Specifically volte working???

Pavan420 said:
Is it has any bugs??? Specifically volte working???
Click to expand...
Click to collapse
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk

cichowlasp said:
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
In India, I used Jio SIM and it works sometime perfectly and sometime it just show incoming calls but when you picked up call the call gets cancelled, and you cannot used Volte for outgoing calls normal calls can be made and jio4g app from playstore doesnt work because it recognize your phone as volte enabled

vvijayk1999 said:
ANDROID P DEVELOPER PREVIEW
Dear friends,
Since the unofficial Android P Dev preview ROM has been developed I'm posting the links below.
Note:
its a preview build, So high chances of instability.
I'm not responsible for any damage caused.
And its not a daily driver.
Steps to install:
Click to expand...
Click to collapse
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558

andromuks said:
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558
Click to expand...
Click to collapse
Bro use rr 6.1.0 treble

Way to early for some one with sigle Z2 Plus as primary phone to try out.
I shall wait till more of a device specific build is made available !!

I get an error error7 when installing incall2.zip. Do everyone alike?

EldarWap said:
I get an error error7 when installing incall2.zip. Do everyone alike?
Click to expand...
Click to collapse
Mount system and vendor

Noverity zip link?

guyz_ahead said:
Noverity zip link?
Click to expand...
Click to collapse
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.

JashanjotSidhu said:
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.
Click to expand...
Click to collapse
Thanks bro. To all of you wanting to enable Double Tap 2 Wake Dt2w, firstly please thank @optimumpro coz of whom I am aware of the mod kernel aduitor https://forum.xda-developers.com/attachment.php?attachmentid=4484977&d=1524581025 Thanks Optimumpro
? Goto to kernel aduitor grant root and head to wake. Then enable dt2w

how to remove this notice?

EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Install magisk, download titanium, remove pixel setup.

EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Long press on that notification then i option will come then click on it then tap disable...done

I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?

Tarunshrm864 said:
I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?
Click to expand...
Click to collapse
you installed via twrp p-lag-fix.zip? I installed it after aex 5.7 and now I have somehow shown that the version of DP3 is installed

guyz_ahead said:
Install magisk, download titanium, remove pixel setup.
Click to expand...
Click to collapse
Can't you just delete it with the TWRP built-in file manager? That's what I would have done.

[MIUI 10 Camera Fix] [For converted A2 users][Indian Variant][Test]

Note- I don't have the Indian variant But theoretically the module should fix the camera in MIUI ROMs for indian users.So please test it and let me know if it works or not.
Thank you.
Magisk Module download link-https://drive.google.com/file/d/1A7-5puSkTeV06hy_ZVRSaSAnWZoNPFfK/view?usp=sharing

This did not work for me on Indian version A2.
I converted then installed Magsik then installed the zip module provided above but still getting black screen

Did anyone tried this..

hackerh2 said:
Did anyone tried this..
Click to expand...
Click to collapse
Yes I tried, but didn't work.

iamshahraj said:
Yes I tried, but didn't work.
Click to expand...
Click to collapse

Does it work for those on MIUI10? I can't go back to android one because of ARB4, MY TWO CAMERAS STOP WORKING

Tab4 8" custom kernel help

Hey guys
I recently got back to my tab 4 and installed magical. But in order to use magisk hide I need a custom kernel that allows namespace mount, which mine doesn't apparently.
Someone advised me to get a custom kernel for it but I'm having a hard time finding it.
My model is SM-T330 , galaxy tab4 8 inches.
Any help please? (Or any other way of getting magisk hide to work?)
Thank you very much

realrj said:
Hey guys
I recently got back to my tab 4 and installed magical. But in order to use magisk hide I need a custom kernel that allows namespace mount, which mine doesn't apparently.
Someone advised me to get a custom kernel for it but I'm having a hard time finding it.
My model is SM-T330 , galaxy tab4 8 inches.
Any help please? (Or any other way of getting magisk hide to work?)
Thank you very much
Click to expand...
Click to collapse
On magisk settings there is a namespace option

XRed_CubeX said:
On magisk settings there is a namespace option
Click to expand...
Click to collapse
Thank you very much
Do you know the exact name of the option? I just checked but can see none with "namespace" on the name

realrj said:
Thank you very much
Do you know the exact name of the option? I just checked but can see none with "namespace" on the name
Click to expand...
Click to collapse
I have Magisk in Italian but you can't understand.

XRed_CubeX said:
I have Magisk in Italian but you can't understand.
Click to expand...
Click to collapse
Unfortunately mine doesn't have that option (even in English) it's missing from the settings menu
I installed the latest version from magisk website
Do you have a tab4 t330 as well? Or a specific version of magisk?

realrj said:
Unfortunately mine doesn't have that option (even in English) it's missing from the settings menu
I installed the latest version from magisk website
Do you have a tab4 t330 as well? Or a specific version of magisk?
Click to expand...
Click to collapse
I have sm-t335 with latest magisk and latest lineage os 16

XRed_CubeX said:
I have sm-t335 with latest magisk and latest lineage os 16
Click to expand...
Click to collapse
I will try flashing lineage os then
I was a little afraid because last time I installed a custom os, I lost some functionalities on my device. Did you noticed any of that?
Also, is it possible to have lineage and then change the looks of the firmware to look like the original ROM?
Thank you very much for all your help

realrj said:
I will try flashing lineage os then
I was a little afraid because last time I installed a custom os, I lost some functionalities on my device. Did you noticed any of that?
Also, is it possible to have lineage and then change the looks of the firmware to look like the original ROM?
Thank you very much for all your help
Click to expand...
Click to collapse
Wait for a lineage os update, they fix the fingerprint and safetynet pass