Hello,
I got a Galaxy S6 Edge+ Live demo Unit (G928X) and installed the latest firmware for G928F as I always do with the LDU devices. Unfortunately the fingerprint sensor doesn't work (I get an error message that there is a problem with that sensor and I should reboot) in my former S6 Edge LDU (G925X) the fingerprint sensor worked after installing a "normal" ROM.
Does anybody know whether the did not build in a fingerprint sensor in the G928X? Or is there a "trick" to get it working?
Thanx a lot!
best regards
I have the same problem on my g928x ldu ,after flashing g928f firmware the fingerprint sensor doesn't work , the cpu doesn't enter in deep sleep mode so it drain around 3% battery per hour in idle and the maximum cpu frequency is 1.3ghz for little cores and 1.8ghz for big cores. I tried a lot of roms and kernels but nothing changed.
mielletseed said:
Hello,
I got a Galaxy S6 Edge+ Live demo Unit (G928X) and installed the latest firmware for G928F as I always do with the LDU devices. Unfortunately the fingerprint sensor doesn't work (I get an error message that there is a problem with that sensor and I should reboot) in my former S6 Edge LDU (G925X) the fingerprint sensor worked after installing a "normal" ROM.
Does anybody know whether the did not build in a fingerprint sensor in the G928X? Or is there a "trick" to get it working?
Thanx a lot!
best regards
Click to expand...
Click to collapse
You need Twrp or CWM Recovery to do factory data reset after flash normal firmware and everything ok
Hello, sorry to use this thread, but i want to ask people you owns this demo if anybody open the phone? I ask this because my g928f had an accident and completely broken LCD and back cover. So it is more cheaper if i buy a demo and replace the motherboard. My doubt is if USB porting charge of demo have connectors for antennas?
hi
hi brother i have ldu device g928x how did u install g925f rom on demo device can u help me pls [email protected] or whatsapp me 00905301704278
Not don't have, because the motherboard is demo and don't have GSM parts
Plz tell me how to remove the retail mode from my g928x ldu completely without brick it. And which firmware needs to install.plz plz plz.
So, did you guys figure it out. I have the S7 demo and I'm looking into the fingerprint issue. Thanks
HI I have a 928 LDU device. I tryed to use the codes to stop retail mode but no result! what 928F firmware did you use? should you delete anything from in it? like bootloader or modem? 5.1.1 correct? please help!!! thank you!
Hi guys,
Which version of the SM-G928F did you use, please have I have the demo device.
hi people,i also have an 928x and installed 928f and now boot loop,enters direct recovery....no further...any advice?ty
Waterproof?
alex_SW said:
hi people,i also have an 928x and installed 928f and now boot loop,enters direct recovery....no further...any advice?ty
Click to expand...
Click to collapse
you better do not try to flash Original rom with ODIN will stuck for ever (in my experience) also do you know are the demo units S6 edge-s6 edge plus-s6 waterproof as the original???
Did u get it to work?
G928X
Hey brother, How did you flashed firmware SM-G928F into your s6 demo unit (SM-G928X) ?? Please tell me how you did it my friend thank you
I will have upto mega.co.nz
I will have upto mega.co.nz just doing it now :highfive:
XIAPAN said:
I will have upto mega.co.nz just doing it now :highfive:
Click to expand...
Click to collapse
Tutorial
Hello I need help I try rooting my new galaxy s7 edge at&t but guess it didn't work so now every since the attempt my phone is super lagging and having this security notice message pop up every 15 minutes need help !
Model number- sm-g935a
Android version 6.0.1
Security patch level november 1st 2016
Baseband g935aucs4apk1
Please need help this issues is so annoying
My service is at&t galaxy s7 edge
subaru98 said:
Hello I need help I try rooting my new galaxy s7 edge at&t but guess it didn't work so now every since the attempt my phone is super lagging and having this security notice message pop up every 15 minutes need help !
Model number- sm-g935a
Android version 6.0.1
Security patch level november 1st 2016
Baseband g935aucs4apk1
Please need help this issues is so annoying
My service is at&t galaxy s7 edge
Click to expand...
Click to collapse
I am also on the same firmware. I can't find any information on this. Can anyone point me to the right links?
Hello. After update oreo, my s8 sometimes, when a try to attach photo or video, crashes and show..WhatsApp stopped restart... What can do and is solvable? Thanks
this is a problem that whatsapp has confirmed. nobody matter this problem but is there! hello
hello. yet this problem after new update oreo in galaxy s8. no solutions???
same problem after i upgraded my galaxy s7 edge to oreo. this problem in unfixed???
Hello, i bought a j5 2017(j530F) from a guy . When i got home, i observed that 4G isn't working and if i shut down the phone, and open again, i have no signal, i have use"Change IMSI". What's the problem?? i change firmware from 7 to 8 oreo with odin, is still not working,
Dears,
I just updated the firmware of my S8 OTA and the SIM+MicroSD trick is now blocked, it is not even possible to enter to Android until the card is removed.
This trick was blocked last year by Samsung on Android 9 on the S9, and now it is included in the lastest Android 9 S8's firmware update. There is a thread within the S9 forum about how to remove the restriction in a S9 but requires rooting the phone.
For the moment I will revert to the latest Android 8 version I had yesterday using Odin, but is there are any suggestions for the S8 without rooting, it will be appreciated.
Regards,