Related
so here is the new edition with uk kernel, basically pretty much the same as before with correct sensor drivers now.
Changelog v1.3 (Android v2.2.1 edition) Download nandroid image here or mirror
- xavwanted's libOMX and MediaGallery.apk which seems to fix HD recording and playback
- Riley600's interactive governor fix
- callwaiting fix
- kousik's mount-o typo fix
- Mioze7Ae move /oc to /system/oc
- bootanim by helmi666
- Email.apk replacement
Changelog v1.2b (Android v2.2.1 edition) Download patch here
- fixes problems with callwaiting functionality.
Changelog v1.2a (Android v2.2.1 edition) Download nandroid image here
- 720P recording fix
- re-added old MediaGallery as Camera app requires it.
- there can be possible hickups with mediascanning (so you know)If you do see many FC's its a symptom of not having done factory reset, so this should indicate whether you need to do it or not.
Changelog v1.2 (Android v2.2.1 edition) Download nandroid image here
- fixed mediascanner issue
- removed old mediagallery (not supported) , now only Gallery3D available.
- removed VoiceCommands app, cpu intensive and taking much storage.
Note, due to the bug in mediascanner and decoding and on top ext2sd support, quadrant benchmarks drastically drops when ext2 is enabled, if the sdcard is not a class6 or higher.. but media decoding bug alone caused incorrect reportings, so dont be surprised when you test now.
Its a full nandroid for new and existing users. if you're using 1.1+ you do not need to WIPE settings, just restore nandroid and reboot, signatures will be recalculated and bootup takes maybe little more, but it works fine.
Patch update Changelog v1.1b (Android v2.2.1 edition) Download patch here
- HDMI added to settings menu, let me know how it works (not tested)
- different proximity sensor module (tested with z-devicetester seems better)
- facebook fix still included.
- Support for loading overclock module at startup.
- apps2ext partition support , will mount at startup if a 2nd partition is found.
its not advanced, so you need ext2/ext3 partition for now.
NOTE: Patches goes into /OpenRecovery/updates and is applied in openrecovery menu "apply update".
Changelog v1.1a (Android v2.2.1 edition) Download nandroid v1.1a link
- Based on 2.2.1 milestone framework leak
- Sync facebook is working
- Lockscreen is new (Blur like)
- see this link for framework theme's.
Changelog v1.1 (Android v2.2 edition) Download v1.1 link
- fixed: OCR camera function currently FC (crash) (Mobireader.apk added)
- fixed: Contacts apk will be replaced in next update.
- fixed: HDMI through media player
- fixed: /mnt/sdcard mount issue
If you want stock korean 2.2 with just english language and working sensors, download this nandroid dump, if you will probably need the 1.1 including recovery.apk to install this the easy way.
but else follow instructions in my other releases, and put nandroid backup into the /nandroid/openrecovery folder and restore using OpenRecovery.
See this post, if you wish to restore a stock rom, or to enable apps2sd filesystem on sdcard
Install instructions:
Make sure sdcard is visible, when you get to step 6 of instructions, or it all fails, same with restore..
A: users with stock 2.1 can proceed to step 1 in instructions.
B: users with stock SBF korean 2.2 rom , need to flash stock 2.1 and goto step 1
C: Users with 1.1+ of rom with OpenRecovery , can skip WIPE and factory reset, and a restore of the new nandroid backup included in the download link, and goto step 8 (and skip step 9 for factory reset)
root it (SuperOneClick ) - included with zip
install OpenRecovery , use included apk.
reboot phone once
copy the folder "nandroid" to root directory of your sdcard.
Make sure sdcard is not attached to pc using "mass storage share" to pc.
Run OpenRecovery app and "install Recovery".
Press Boot recovery
restore the backup "stock22xxxx"
wipe / factory reset in OpenRecovery
reboot
Issues reported by users in v1.2a:
- Radio FM volume cannot change.
- MediaGallery does not do videoplayback
Issues reported by users in v1.0:
- Radio FM volume cannot change.
- Sync account option for facebook / Twitter is not added in settings when account is configured.
- Camera language not going to change (its korean app, so not support for other langs)
- LEDS do work, its sensors that makes them go off/on (no need to report this anymore)
STATEMENT:
Please don't keep asking the following question directed to me, public or via PM;
- Can you include language XXXXXXXX .
Answer: NO
- Can you teach me how to do custom roms
Answer: NO
- will you include RTL for hebrew
Answer: NO
- will you make other roms like cyanogen,htc etc..
Answer: NO
for new users unable to write in public forums, i cannot answer all your PM's personally, as that gets to be a quite a few per day and many monthly...i am not a support central for xt720 community..i simply don't have that kind of time available.
Dexter_nlb said:
if i press camera button here (1-2 sec) it opens?
media button (the small one becide the cam button?) ? yes i see its not doing any action
from what i read now, the known accelerator driver issue + led,hdmi is 2 majors, im not sure about other issues becides the extra languages which for some seem to cause issue..
the way the launcher works is a matter of taste (seeing like 20+ android devices)
- if you're coming from stock 2.1 there is differences and more functions, but if you tweaked alot maybe less features are here, like dalvik.
- rotation is a problem if you plan alot of games with acc. functionality..
- I personally dont experience problems, except the buttons which personally i would love to fix now..
I think overall there is a positive feel about the first working release.
Click to expand...
Click to collapse
I am still unable to sync with facebook contacts, anyone else?
-->settings ---> accounts add the facebook account successfully but then not in the accounts list and then contacts in phone do not sync.
Dexter_nlb said:
It seems that many not being experienced users, still try to install and here is the instruction for installing the rom.
Install instructions (based on korean sbf):
1. Install korean sbf (STSKT_N_79.33.50R) using RSDLite ( link here )
- boot your xt720 into bootloader (press power up while holding VOL+ + and shutter button during bootup)
- when RSDLite application on pc says "connected" , your ready to flash
- select the SBF
- press start
2a. Set language to english, set usb mode into Charge Only and USB debugging on in the Settings->Apllications->Development menu.
2b. root it (using SuperOneClick) - ( link here )
3. install OpenRecovery , follow instructions on ( http://bit.ly/gIPoXo ) files included (OpenRecovery & OpenRecovery.zip )
5. copy the folder "nandroid" to root directory of your sdcard.
6. boot into OpenRecovery (adb shell reboot openrecovery)
7. restore the backup "stock22" in openrecovery
8. wipe / factory reset in OpenRecovery
9. reboot
Download here
APK for easy installation and rebooting into OpenRecovery is in the works (based on previous CWM recovery app)
Click to expand...
Click to collapse
Added a rule for people who do not know how to use SuperOneClick
hellmonger said:
I am still unable to sync with facebook contacts, anyone else?
-->settings ---> accounts add the facebook account successfully but then not in the accounts list and then contacts in phone do not sync.
Click to expand...
Click to collapse
deleted.. i misunderstood the q here
hi there ! is it the final version of 2.2 or still in testing process?
nice job and thank you all...
FM RADIO also missing.....
@Dexter, thank you for contacts.apk. But how to install it? After replace in /system/app it's says - It's not installed, and when i try to install it - it says: I can't be installed.
For more issues: how about light sensor, that detects when you speak on your phone?
On 2.1 when you speak touchscreen goes off and you cant press it errorly.
Thank you very much.
FM RADIO also missing.....
Click to expand...
Click to collapse
That from 2.1
Facebook account missing.
Dexter_nlb said:
deleted.. i misunderstood the q here
Click to expand...
Click to collapse
After full flash and all instructions followed corectly i can boot into 2.2 without any problems.
i set up my account with google, go to the market, download "facebook for android" install is succesfull, i then go to ==> settings menu ==> Accounts menu, add account, choose facebook, am successfull at login in to facebook, return to accounts menu = Facebook account is not there.
And my phone contacts do not sync with facebook.
Thank you
And my phone contacts do not sync with facebook.
Click to expand...
Click to collapse
Did you set your FB freinds to sync in the FB app?
joe206hdi said:
Just flashed korean sbf ... maybe due to i´d used launcherpro in stock rom i can´t get into the rom background and apps are still there in korean rom.
going back to european rom and do a wipe/reset before flashing again the korean one...
later more
@dexter can´t we use universal androot instead of super one click
Click to expand...
Click to collapse
finally fixed it
1.flashed again german stock rom sbf file
2. do a factory reset in stock recovery
3. flash korean sbf file while reboot unplug the usb - when rsd lite shows massage "reboot manualy" - phone is still in reboot ( when i don´t do this it won´t work ?!?!
4. go on with dexters xt720-2.zip nandroid procedure
@dexter unversalandroot won´t work - just tested before superoneclick - adb install worked fine but no root....
-------
bugs
camera options are still in english - i´m on german
more within tomorrow
Joe - thanks great work
anyone else get a Installation error Unknown reason -18 when trying to install battle bears. i loved that game. worked on 2.1 even tho it said it didnt
3rdstring said:
Did you set your FB freinds to sync in the FB app?
Click to expand...
Click to collapse
Is yours working?
Where are those settings please? not in the accounts menu cause facebook is not there, i am able to add it from that menu but then it disapeares, when i clic add again facebook option is availible but just clics to nowhere and returns to the add account page....
smurfb said:
I been following this thread, very intresting! I thought, would it not be possible to use the kernel from XT720 (2.1), beause its the same kernel version? Or is too much changed?
Click to expand...
Click to collapse
ok, i went back once more and flashed just 2.1 kernels from uk rom, and indeed all sensors work now.. but,but,but... no 3D accelerator is currently activated, so screen lags really alot..
but yes, with that kernel it still boot up fine, with a few changes.
edit: update - ITS WORKING!!! running with 2.1 uk release kernel , its working now, all sensors activated..
Where are those settings please? not in the accounts menu cause facebook is not there, i am able to add it from that menu but then it disapeares, when i clic add again facebook option is availible but just clics to nowhere and returns to the add account page....
Click to expand...
Click to collapse
In the facebook app if you tap on "Facebook" at the top you go to the page to navigate to news feeds, friends, etc. If you hit your options button there there is a settings screen that includes preferences for how contacts are sync'd.
HTH
3rdstring said:
In the facebook app if you tap on "Facebook" at the top you go to the page to navigate to news feeds, friends, etc. If you hit your options button there there is a settings screen that includes preferences for how contacts are sync'd.
HTH
Click to expand...
Click to collapse
Yes i saw those settings, unfortunately they have no effect or bearing on the accounts.
I believe this is a bug, yet no one has confirmed or denied being able to reproduce it.
All sensors activated!!
I think smurfb deserve a little thanks, for pushing the request/idea just to try loading the old uk kernel once more, so i did and this time i fixed the problems with loading the old kernel and lib/bin required, its not much and most (2.2) korean state is kept intact..
ill do some testing after the new nandroid backup and start uploading v1.0
Dexter_nlb said:
I think smurfb deserve a little thanks, for pushing the request/idea just to try loading the old uk kernel once more, so i did and this time i fixed the problems with loading the old kernel and lib/bin required, its not much and most (2.2) korean state is kept intact..
ill do some testing after the new nandroid backup and start uploading v1.0
Click to expand...
Click to collapse
does that mean u activated the 3d accelerator. and would replacing the settings.apk from 2.2 from motoroi enable hdmi since the settings arnt even there anymore in this version the hdmi libs and everything is still there jus no hdmi.
khalpowers said:
other way u can install terminal su on your phone after flash to froyo..then u can su from there...
Click to expand...
Click to collapse
IT WORKED!!!!!!!!!!!!!!! THANK YOU SO MUCH!!!!!!!!!!!
AND DEXTER!!!!!!!!! THANK YOU!!!!!!!!!!! You're amazing.
Ill be up to any testing you guys need me to do
easye420 said:
does that mean u activated the 3d accelerator. and would replacing the settings.apk from 2.2 from motoroi enable hdmi since the settings arnt even there anymore in this version the hdmi libs and everything is still there jus no hdmi.
Click to expand...
Click to collapse
yes, 3d is fully functional now. I dont think it will work, but i will find a way to add the functionality..
the korean rom has only english, which im sure not many appreciate, although camera as one is used from that rom so only english is enabled.
but i will for sure try and get HDMI working..
I got FMRadio app added, does it help?
Thank you so much for making this, Dexter. We are hungry of froyo, asking for more. But you deserve to take a break
which languages does it have?
I will install it soon. can someone upload a video of it?
Disclaimer: I am not responsible for any damage (including, but not limited to, loss of data, non-functional device etc.) which may occur to your device from following the directions (or from any failure to follow the directions) found on this post. Use (and flash) at your own risk.
Credits go to genokolar for actually porting the U8860 2.3.6 firmware to the U8800Pro. This builds upon his port.
You may find his port announcement here, and you can download it from here. Thanks to user Skyline111 for the mirror.
Thanks also go to birdyi, who ported the U8860 2.3.6 firmware to the U8860. His port contained some brilliant things such as CarrierIQ framework removal.
--
This is a 2.3.6 ROM for the U8800Pro based on the U8860 B866 ROM. 2.3.6, naturally, brings a slightly newer version of Gingerbread compared to our 2.3.5 with B540. While I know it's all about CM9 (ICS), MIUI and so on these days, I'm a fan of stock (in the Huawei sense of the term) Gingerbread.
Features (or limitations depending on what you think of some of the following entries) of this ROM:
Rooted (adb also runs as root, too)
(Huawei) DLNA
(Huawei) A task manager that shows open applications with pictures (launching it when pressing Home has disabled in this modification because I found the Recent menu saves more time)
(Huawei) Security Guard, a way of hiding text messages, I think
(Huawei) Traffic Manager – a data counter
(Huawei) Wi-Fi WPS support
(Genokolar) FPS unlocked by default (configurable in enhanced.conf)
(Genokolar) ZRAM (Compcache) enabled
(Genokolar) Changed the autorun.iso path to the image partition so that formatting /data from CWM does not leave you with an empty CD-ROM drive when you plug the phone into a computer
bugreports service turned off entirely so that pressing the volume up button quickly after you've pressed volume down does not leave you with a few seconds' delay and a bugreports folder on your memory card
BusyBox from CM7
Android’s toolbox (poor coreutils replacement; more barebones than BusyBox) has its full set of links installed in /system/bin, so you use Android’s native chmod etc. tools. Why? To match the stock B512 firmware and to ensure developers testing on the U8800Pro correctly hardcode “busybox” in their root programs if needed
Optional lazy CPUfreq governor
Default language and region changed from Chinese – China to English – United Kingdom
Added in boombuler’s AppWidgetPicker
CM7’s Pacman added in to remind you to install Google Apps after adding an account with the Setup Wizard (make sure GApps is installed!)
VoiceDialler.apk added in from B512 firmware (although, to be honest, the microphone quality on my phone is awful…)
Bash shell, fix_permissions script, iwmulticall, MMS.apk, tcpdump and gdbserver and additional ringtones etc. from CyanogenMod (20120107-cm-7.1.0-u8800pro-Geno-en.zip) added in
Phone model changed to Desire HD, so Gameloft games can be bought. This may cause licensing problems with bought Market applications so be careful. (Although, I must admit that giving money to a company that doesn't support our phone seems counter-intuitive.)
Shutdown vibration reduced from 500ms to 100ms because I hate it (especially at night) but understand its usefulness in determining the answer to the question “Has the phone gone off yet?”
Huawei’s god-awful Low Battery notification replaced with a nicer one from CyanogenMod
Widgets actually restore themselves after a reboot! This was fixed by me replacing 2.3.6's PackageManager service with Huawei's 2.3.5 one.
MyCalendar widget from birdyi's port and MyEmail from B512 added in
Fixed proximity sensor dying if the light sensor was on, too.
Stripped down enhanced.conf - only swappiness, VSync and ZRAM settings available. I don't like /system/log.txt being created every time my phone boots and I think using a tool in Android like, say, No-frills CPU Control is the better place to set the frequency. SetXperia has support for setting the phone's CPU voltage.
More languages selectable from the Setup Wizard than just English (US) and Chinese.
Flash Player removed for copyright reasons. You can install it from the Market
Notepad and Richpad removed
Droid Sans Fallback supports more character ranges
Toolbox correctly has "Wi-Fi" instead of "WLAN"
Misc. kernel modules, like in B512, included
But I like the BusyBox tools and want to use them without having to prefix BusyBox everytime!
Just run the bash shell; BusyBox versions of cat, chmod, chown, df, insmod, ln, lsmod, mkdir, mount, mv, rm, rmdir, rmmod, umount, sleep, kill, and ifconfig will become the default while you’re using the bash shell (also nicer, BTW: you get tab-completion, for one) thanks to the CyanogenMod team.
Attempts to remove Carrier IQ. Huawei *do* include Carrier IQ in their firmware.
I’ve done the following to attempt to remove it the best I can:
Edited boot.img to not start Carrier IQ services
Removed Carrier IQ libraries from /system/lib and CiQ binaries from /system/bin
Added lines to build.prop to disable CarrierIQ, taken from the framework.jar file itself.
birdyi has also modified framework.jar to stop the CarrierIQ objects from being instantiated.
Ideally the best way to be Huawei-free is to use CyanogenMod.
I've removed the Cloud+ apps because of this. I've left some Huawei apps in, but I strongly recommend you install PDroid (the patcher works fine with this ROM) and block the more concerning permissions of Huawei system apps.
Kernel changes
Since the kernel genokolar provided with his port had a problem when a program used the light and proximity sensor at the same time – the proximity sensor would die out until the next restart – I took it upon myself to rebuild the kernel available from his github repository with the config from his latest kernel. After comparing his kernel to the source Huawei put out, I could see no code changes that would cause the proximity sensor to die out. Since I was rebuilding the kernel, I thought I’d make a few changes:
Add in the Lazy CPU governor by Ezekeel
Update a patch by stockwell to disable keypad lights (echo 1 > /sys/module/leds_msm_pmic/parameters/disable_button_leds) - use ButtonLock to control
Reverse genokolar’s decision to always allow NV logging – this can be turned on and off from the service menu on a stock ROM anyway…
Set minimum backlight level to 15, from Franco’s kernel. Warning: I haven’t tried setting it to 15 so I don’t know if that value renders the display practically useless, and I don’t know if Android lets you set it to 15 from its settings!
ButtonLock
Not as revolutionary as I'd like it to be, but useful nevertheless. I've written a quick widget, which looks like the Power Saving one, that turns off the button backlight. Useful for when you're reading books through FBReader.
You need to be using my kernel as it has the disable_button_leds patch. The advantage the disable_button_leds patch has over the chmod 444 method is that it doesn't introduce noticable lag. The widget's source is in the same folder.
When pressing the widget's button for the first time, there is a delay as the Superuser allow/deny dialog box takes its time to come up. After accepting, future launches are instantaneous.
If you need something that this ROM doesn’t provide compared to other stock ROMs, I recommend:
Not using it; or
Using a combination of diff, abootimg, Winmerge (or Beyond Compare) and apktool to compare this with genokolar’s original release, and with birdyi's ROM, and add what you want back in
Installation
Note: You must be running firmware version B522 on your device! If you have B540, you need to downgrade. If you have a firmware version lower than B522 (Froyo?), you must upgrade to B522 first. If you're already running a custom ROM, ignore this.
Take out the SIM card if you want the setup wizard to use Wi-Fi during setup.
Install genokolar’s recovery: http://forum.xda-developers.com/showthread.php?t=1343276
Place u8800pro-2.3.6-geno-v1-modified.zip on the internal memory card or an external one (I recommend the internal one to ensure you don’t run into U8800Pro CWM bugs with the external).
Get gapps for Gingerbread and place on your memory card. Find the link using every Android user’s favourite search engine.
I highly recommend using PDroid, but it’s up to you whether you want to use it. If you would like to use it, get the patcher from http://forum.xda-developers.com/showthread.php?t=1357056 and point it to u8800pro-2.3.6-geno-v1-modified.zip. Place the PDroid-v1.27-u8800pro-2.3.6-geno-v1-modified.zip file onto your memory card.
Boot into recovery (make sure that fast boot is turned off in Settings->Applications and hold power and volume up while turning the phone on)
Do a data/factory reset.
Install the ZIPs, starting with u8800pro-2.3.6-geno-v1-modified.zip (obviously).
Reboot!
Install the Google apps (those ones not included in CM's gapps ZIP like YouTube) if desired when prompted – but note that the Market will probably close as you’re doing this as it will automatically update itself.
Downloads
ROM: http://www.mediafire.com/?k0g17z1kraw7b67
SHA512: 4988B123488B8B24732401420DE849E8D8E5632C075A4520F176AA1D64DA0ECF946FF4D4E6CEC4D257EE4C4C999200A93C2CB309FD7B5FE50234A1C5700DEB2D
Modified kernel source (I suck at Git - I really need to read that VCS by Example book I have ): http://www.mediafire.com/download.php?a0022t73q2v7r7d
ButtonLock source (Apache licensed, though I must admit I'm more of a GPL person...): attached.
--
Extras:
genokolar's 5.0.27 recovery for the U8800Pro with the charging animations from https://github.com/Victor-android/android_device_huawei_u8800pro/tree/master/recovery/res/images:
attached.
Anyone tried it?
ill try it this evening I hope it fixes missed calls....
I have B512 official gingerbread, am I good to go?
Too times was a situation, when phone lost connection with wi-fi spot, he see the network, but can't connect. Help reboot.. else working so far without problems, testing..
...
turned off the wi-fi and got the main bug - does not work 3g/2g data transfer, hmm....
bobsido said:
with wi-fi spot, he see the network, but can't connect. Help reboot.. else working so far without problems, testing..
Click to expand...
Click to collapse
Interesting. I've had no problems reconnecting to a network that uses WPA2-PSK and another that uses 802.11x authentication.
turned off the wi-fi and got the main bug - does not work 3g/2g data transfer, hmm....
Click to expand...
Click to collapse
Are your APNs set correctly? In my case 2G works and I've had HSDPA working because when testing the Weather Clock widget (from B522, when I had it in) it would connect using it - I could see the icon in the status bar - and I had the pleasure of having my balance run down each time - I'm not a rich man
Edit: In build.prop, you can try playing with ro.config.hw_fast_dormancy=3 - genokolar had it set to 2, but I changed it back to 3 from the U8800Pro original ROM because I wouldn't be able to connect to my network otherwise.
Hopefully, it's not the case but it could be hardware differences. genokolar, who's work this is based on, being from China, probably has a Unicom U8800Pro, just like I do...
@Zaic
B512? This is for the U8800Pro. I'd advise you not to flash it. I'd recommend using birdyi's ROM. If you're after a certain improvement from this ROM, tell me and I'll try and isolate it for you (as long as it doesn't involve kernel stuff - I don't know how to build U8800 kernels) so that you can use with birdyi's ROM
I have u8800 pro - 100%
My ROM is original unrooted 2.3.5 B512 its one before the latest release which is B540
My ROM still has access to pink screen, otherwise its the same as B540 I guess
SO what should I do first to install this ROM? roll back to 2.2.2 or was it 2.2.3?
Ah, if you're running 2.3.5 already and in the pink screen mode you see a folder called image when connecting your phone to the computer you're ready to go
Hi!
My compliments for the porting of Android 2.3.6 to U8800Pro!
I am using your rom since yesterday and still now I am not having any kind of problems.
Anyway I notice the same bug of the B512 and B540 roms: put your smartphone on screenoff, then wait about 1 minute and fastly unlock the screen and try to pinch to zoom on the home. Sometimes the multitouch doesn't work on every position of your fingers, it only works correctly if your fingers are in the position of principal axes.
Please try to reproduce this bug.
I am using LauncherPro but this bug is indipendent by the launcher (for example I tried also Zeam Launcher, Go Launcher EX, etc etc).
I hope you can solve this bug, maybe kernel-related.
Regards,
kalo86
Hi,
kalo86 said:
My compliments for the porting of Android 2.3.6 to U8800Pro!
Click to expand...
Click to collapse
The honor is genokolar's
I am using your rom since yesterday and still now I am not having any kind of problems.
Click to expand...
Click to collapse
Thanks; it's nice to know that it's working OK on somebody else's device other than mine.
Anyway I notice the same bug of the B512 and B540 roms: put your smartphone on screenoff, then wait about 1 minute and fastly unlock the screen and try to pinch to zoom on the home. Sometimes the multitouch doesn't work on every position of your fingers, it only works correctly if your fingers are in the position of principal axes.
Click to expand...
Click to collapse
Sorry for asking, but how do you pinch to zoom on the home screen? I'm using Go Launcher Ex and I know that that has the swipe up gesture but I can activate that with one finger, anyway.
In any case, have you applied the Synaptics touchscreen update? For me it has increased the touchscreen performance greatly. I had one problem that when after unlocking, the touchscreen wouldn't respond unless I turned the screen off and tried again. The update solved that.
If you want to try it, open the service menu (*#*#2846579#*#*), go to ProjectMenu->Upgrade->Touch screen version query and see if it says "synaptics". If so, put the original Huawei recovery.img back on and put the synaptics.img file in a folder called update on your SD card. Use the recovery's "touchscreen firmware update" update option and it will automatically reboot when it's done.
Best regards,
qwerty12
Oh, really thank you for this "news" about the synaptics touchscreen update!
I have a synaptics too, then I am going to update the firmware.
Another bug, still present in B512, B540, Cyanogen and U8860 port: unplug your battery from the smartphone, insert it again, power on, then open your file manager and try to read the sdcard content. At 99% my sdcard is not read, then I have to reboot my U8800Pro and magically the sdcard is read.
Thanks to You and Genokolar for our development!
Regards,
kalo86
UPDATE: I updated the synaptics touchpanel but I have always the bug of multitouch. It is reproducible when you unlock the screen after a pause of 1 minute (about), then you open the stock browser and try to zoom with the multitouch. It works only if your fingers are on the principal axes and not in other positions. I have this bug on 4 different U8800 Pro! It cannot be a singular problem.
So, I have tried a lot of roms, based on B512, B540, U8860, CyanogenMod 7.1, I am sure I will try this bug on the next release because it's mabe a kernel bug due to the multitouch field.
Video demonstration
This is a video which I just uploaded on YouTube with the real multitouch bug.
This bug is in 4 different U8800 Pro.
http://www.youtube.com/watch?v=avSdW2V8TLg
kalo86 said:
Another bug, still present in B512, B540, Cyanogen and U8860 port: unplug your battery from the smartphone, insert it again, power on, then open your file manager and try to read the sdcard content. At 99% my sdcard is not read, then I have to reboot my U8800Pro and magically the sdcard is read.
Click to expand...
Click to collapse
I really can't reproduce this. I pulled out the battery while it was on, put it back in and started File manager (the one included with Huawei ROMs) and the internal SD card along with my external one were seen fine.
UPDATE: I updated the synaptics touchpanel but I have always the bug of multitouch. It is reproducible when you unlock the screen after a pause of 1 minute (about), then you open the stock browser and try to zoom with the multitouch. It works only if your fingers are on the principal axes and not in other positions. I have this bug on 4 different U8800 Pro! It cannot be a singular problem.
So, I have tried a lot of roms, based on B512, B540, U8860, CyanogenMod 7.1, I am sure I will try this bug on the next release because it's mabe a kernel bug due to the multitouch field.
Click to expand...
Click to collapse
Thanks for the video! Unfortunately I don't know how this can be fixed - I'm not a developer! It was only yesterday I tried looking in the driver to see how I can enable more than two finger recognition but I'm not seeing it...
Best regards,
qwerty12
Sorry for disturbing you, but I have a question: do you have the same bug of the multitouch after the lock-screen?
This is a second video about the same problem:
http://youtu.be/64NvbFJD3rs
qwerty12 said:
I really can't reproduce this. I pulled out the battery while it was on, put it back in and started File manager (the one included with Huawei ROMs) and the internal SD card along with my external one were seen fine.
Click to expand...
Click to collapse
The same here with sd,full power off device, power on then sd card is not mounted and cpu load is almost 100%. after restart or reinserting sd, problem just dissapear. on every rom i tried. i flashed official V100R001C00B512G001Gb (2.3.5) and then tried CM7; u8800+v100r001c00b540g001gb-rooted_geno-v4.
Is FM Radio working in this ROM?
Yes, Radio is working fine
qwerty12 said:
Are your APNs set correctly?
Click to expand...
Click to collapse
i fix APN settings and 3g/2g start work, thanks.. after reflashing wi-fi start work without problem. but after first reflash don`t work home button. they have response, but nothing happen. i secondary reflash phone, without wipe data/cash and home button start to work correct.. now tests are continuing
kalo86 said:
Sorry for disturbing you, but I have a question: do you have the same bug of the multitouch after the lock-screen?
This is a second video about the same problem:
http://youtu.be/64NvbFJD3rs
Click to expand...
Click to collapse
A little bit - after unlocking, I can do the multitouch gesture and phone will respond like it's supposed to but I have seen twice that it has not responded to me; I have to do it twice more...
Barracuda72 said:
Is FM Radio working in this ROM?
Click to expand...
Click to collapse
Like kalo86 said, it is indeed
bobsido said:
i fix APN settings and 3g/2g start work, thanks.. after reflashing wi-fi start work without problem. but after first reflash don`t work home button. they have response, but nothing happen. i secondary reflash phone, without wipe data/cash and home button start to work correct.. now tests are continuing
Click to expand...
Click to collapse
Please do let me know if you come across more problems
Zaic said:
Anyone tried it?
ill try it this evening I hope it fixes missed calls....
I have B512 official gingerbread, am I good to go?
Click to expand...
Click to collapse
So, any missed calls?
If someone wants to help the Community to understand the sdcard mount bug, please have a look here: http://forum.xda-developers.com/showthread.php?t=1483519
This is a poll, please vote!
Best regards,
kalo86
Zyzas said:
So, any missed calls?
Click to expand...
Click to collapse
Haven't had time to install this ROM yet.... but ill report as soon as I know
CM10.2 for Canadian Samsung Galaxy S2 HD LTE (SGH-I757M)
Code:
[COLOR="red"][B][SIZE="4"]*** Disclamer ***[/SIZE][/B]
THIS ROM IS FOR THE CANADIAN SGH-I757M ONLY... DO NOT FLASH IT ON ANOTHER DEVICE!
By flashing this ROM, you are voiding your phones warranty (Unless you return it
to complete stock which is possible, but beyond the scope of this thread). You
also agree that I will in no way be held responsible in the event that your
device becomes bricked (Not likely to happen). In addition, you are responsible
to take the necessary backups of your apps, data, sms, contacts, calendar events, etc.
If you agree, then please continue on ;)[/COLOR]
Code:
[COLOR="red"][B][SIZE="4"]*** NEW RECOVERY REQUIRED ***[/SIZE][/B]
Due to the addition of user control in CM10.1/CM10.2, you are required to update
your recovery to a supported recovery. As of this writing, the latest available
version is CWM6.0.3.9/Philz5.18.4 for the SGH-I757M.
If you flash the new ROM with the old incompatible recovery, you risk loosing
your sdcard under a bunch of subfolders.[/COLOR]
Code:
[COLOR="red"][B][SIZE="4"]*** NEW RADIO FIRMWARE REQUIRED ***[/SIZE][/B]
As of CM10.1, ICS radios (I757MUGLH2) are no longer supported. You must download the new JB radios (I757MUGMC5).[/COLOR]
Introduction
It's finally here :-D CM10.2 (Android4.3.x) for the Bell Canada Samsung Galaxy S2 HD LTE (SGH-I757M). Among the most notable new features are new adreno graphics drivers with triple buffering (this is project butter). More desired may be the new privacy manager features that allow you to control, on a per app basis, which information you wish to share. Other improvements include an improved lockscreen cLock and a new integrated Superuser.
Click to expand...
Click to collapse
Images
SEE SCREENSHOTS TAB AT THE TOP OF THIS PAGE.
Click to expand...
Click to collapse
What Works
* Phone
* Wi-Fi
* Mobile
* GPS
* Bluetooth
* SMS/MMS
* Data Usage
* Camera/Camcorder
* BLN Notification (Enabled in Advanced Device Settings)
* VM Notification
* Youtube Overlays
* init.d is fully supported
Click to expand...
Click to collapse
What Doesn't Work
* I experienced an incompatibility with some of my existing mp4 media files and when gallery tries to load them they cause a soft reboot. Loading these videos into the gallery media player using a 3rd party file manager seems to work without issue, it is the loading of the preview in gallery that causes the phone to crash.
Solution: The solution is to use a file manager to move the mp4 files to a new directory and add a ".nomedia" file to that directory so that when browsing photos in the gallery, it does not try to load the offending mp4 files.
* When unlocking the screen, sometimes only the capacitative buttons light up, and the screen doesn't come on. This seems to happen about 80% of the time.
Solution: This can be fixed by locking the screen, then unlocking it again. In about 5% of these cases the screen does not come on again. Just repeat the steps again until it does.
This has been fixed as of build 20131029
* You may notice a screen flicker when you first flash this ROM. This is due to a bug where the system can't decide whether to render the graphics with the cpu or the gpu, thus the flicker.
Solution: This is fixed by turning on Settings -> Developer Options -> Disable HW Overlays (You must first enable Developer Options by pressing 7 times on Settings -> About Phone -> Build Number). This will be reset on every boot. if you install Universal Init.d, my 91fixoverlays script will run on each boot and fix this automatically.
This has been fixed as of build 20131029
Click to expand...
Click to collapse
Pre-Installation instructions
1) Download to your sdcard, the new CWM6.0.3.9 flashable zip which is compatible with CM10.1/CM10.2
2) Enter your existing CWM Recovery
3) Install Zip From sdcard
4) Select the CWM_RECOVERY_6.0.3.9_I757M_20131005.zip that you downloaded to your sdcard
5) Flash the new Recovery
6) Go back to the main recovery menu and go Advanced -> Reboot Recovery (This might not actually reboot you into recovery, you may have to do that manually by turning off phone and using 3-button combo)
Click to expand...
Click to collapse
Now that you have the new recovery flashed to your device, you can continue to install this ROM.
Please be aware that the new recovery detects your sdcards (internal/external) in a different way. Your internal sdcard is recognized as /storage/sdcard0 and your external sdcard is recognized as /storage/sdcard1.
Installation instructions
1) Download the Rom and Gapps (Use only the Gapps downloded from this thread. It is customized due to our small cache partition)
2) Enter CWM
3) TAKE A NANDROID BACKUP
4) Wipe Data/Factory Reset
5) Format Cache
6) Advanced -> Format Dalvik Cache
7) Mounts and Storage -> Format /data,/cache and /system (Required for a clean flash)
8) Flash the Radios
9) Flash the ROM
10) Flash the Gapps
11) Reboot Phone
Click to expand...
Click to collapse
NOTE: If you are using Philz Touch/Advanced Recovery, you can replace steps 5 - 7 by selecting the "Clean to install a new ROM" option.
Download
ROM Downloads
Build: 20140224 (Latest)
ROM: cm-10.2-20140224-UNOFFICIAL-celoxhd.zip (185.4MB)
GAPPS: gapps-jb-20140224-signed.zip (106.5MB)
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
NOTE: A dirty flash should work for upgrading , but a clean flash is highly recommended
Build: 20140120
ROM: cm-10.2-20140120-UNOFFICIAL-celoxhd.zip (185.4MB)
GAPPS: gapps-jb-20131231-signed.zip (103.8MB)
JB Radios: JB_modem_I757MUGMC5-flash_this_in_CWM.zip (21.3MB)
Recovery Downloads
NEW CWM6.0.3.9 compatible with CM10.1/CM10.2
CWM_RECOVERY_6.0.3.9_I757M_20131005.zip (7.6MB)
NEW Philz Advanced Recovery 5.18.4 (CWM 6.0.4.4) compatible with CM10.1/CM10.2
PhilzAdvancedRecovery5.18.4-CWM6.0.4.4-SGH-I757M.zip (9.5MB)
NEW *** RECOMMENDED *** Philz Touch Recovery 6 (CWM 6.0.4.5) compatible with CM10.1/CM10.2/CM11.0
[celoxhd][SGH-I757M][CWM Advanced Edition] PhilZ Touch
* The downloads can also be found here on XDA. Use the "Download" tab at the top of the page to access both direct download or torrent download of this ROM.
Click to expand...
Click to collapse
Tips and Tricks
Checkout the second post for some tips and tricks on setting up the ROM.
Click to expand...
Click to collapse
Changelog
Code:
[B]December 23, 2013 - Build 20131223[/B]
* Revert build.prop to use dyn instead of gpu (less problems)
* Added back 91fixoverlays to /system/etc/init.d to disable hw overlays and fix screen flicker on boot
* Re-worked 91fixoverlays script so that it now runs in it's own shell to stop it from blocking other startup scripts and causing a laggy boot
* Fixed up device tree code including adding the correct definitions for boot animation size and update to the build fingerprint
* Synced latest changes from CyanogenMod
[B]December 1, 2013 - Build 20131201[/B]
* Force gpu rendering in build.prop
* Improve fix for screen on delay
* Synced latest changes from CyanogenMod
* Updated GAPPS
[B]October 29, 2013 - Build 20131029[/B]
* Tweaked build.prop to fix screen flicker and notification drawer lockup
* Fixed screen unlock bug - [URL="https://github.com/titanic-fanatic/android_kernel_samsung_msm8660-common/commit/5e163ff0c5d90a4518cbc9e14c86dceec095c70a"]Commit 5e163ff0c5d90a4518cbc9e14c86dceec095c70a[/URL]
* Added SmartAssV2 Governor - [URL="https://github.com/titanic-fanatic/android_kernel_samsung_msm8660-common/commit/511e45206bb9a1454a0c43b3d626749c1fa2c241"]Commit 511e45206bb9a1454a0c43b3d626749c1fa2c241[/URL]
* Added Adaptive Governor - [URL="https://github.com/titanic-fanatic/android_kernel_samsung_msm8660-common/commit/7f40cc5808bad6dafc6b351b93b3d0ccbd0777a6"]Commit 7f40cc5808bad6dafc6b351b93b3d0ccbd0777a6[/URL]
* Added Lagfree Governor - [URL="https://github.com/titanic-fanatic/android_kernel_samsung_msm8660-common/commit/d1392017601d27303fbce9da18d2af718e7e1a65"]Commit d1392017601d27303fbce9da18d2af718e7e1a65[/URL]
* Restore Advanced Device Settings - [URL="https://github.com/titanic-fanatic/android_device_samsung_msm8660-common/commit/3126c17c6165c7d96abde4cd7459769e165aa195"]Commit 3126c17c6165c7d96abde4cd7459769e165aa195[/URL] / [URL="https://github.com/titanic-fanatic/android_packages_apps_Settings/commit/9031ffb1f4e4185f397724a27e3d75afe7fd67e4"]Commit 9031ffb1f4e4185f397724a27e3d75afe7fd67e4[/URL]
[B]October 5, 2013 - Build 20131003[/B]
* Initial release
Click to expand...
Click to collapse
FAQ
Q. How do I install SuperSu?
A. Install the latest version from the market, and also make sure you have Universal Init.d installed and active. Then open SuperSU and when it asks you to update the superuser binary, answer yes and make sure you select the "TWRP/CWM" method. This will reboot your phone into receovery where the superuser binary will be updated and the su daemon script added. When your phone reboots, recovery will warn you that your device may possibly be unrooted. This is because of the install-recovery.sh script that is required to start the superuser daemon which allows SuperSu to manage superuser permissions. You are not unrooted ;-)
If your having difficulties getting SuperSu installed, try downloading the flashable zip and manually flashing it to your phone.
UPDATE-SuperSU-v1.65.zip
* Thanks to @formercontra for this tip *
* Make sure this is the way in which you want to manage superuser permissions as I have not yet found a way to revert to the integrated superuser without having to re-flash the rom
Q. How do I access Developer Options?
A. Go to Settings -> About Phone and scroll to the bottom. Press the Build number 7 times to activate the Developer Options.
Q. Why is my screen flickering?
A. There is a bug in this ROM where the board can't decide whether to display the frames with the cpu or the gpu, thus the flickering while it resolves the issue. To fix it, disable HW Overlays in Developer Options. This needs to be set on every boot unless you are running Universal Init.d and my 91fixoverlays script is present in the /system/etc/init.d folder.
Q. When I unlock my screen, my menu/home/back/search buttons come on but the screen is black?
A. This is a known bug in this ROM and is on the list of things that need to be fixed. For now, when this happens, just lock the screen, then unlock it again and the display should come back. If it does not, repeat until it does (the most number of times i had to do that was 3).
Q. I was browsing my pictures/videos in the gallery and my phone rebooted?
A. This seems to be caused by the gallery trying to generate a preview from the first frame of an mp4 created on older versions. Simply move the mp4's to a different directory with a file manager and add a ".nomedia" file to the folder to stop the gallery from trying to scan them. To open them, open with a filemanager and then select the gallery media player and it will play without issue.
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* CyanogenMod Team - ROM Base
Without all of the hard work and efforts of the CyanogenMod team, this ROM would not be possible, so we owe them our thanks for providing us with such excellent ROMs.
In addition, I have received a lot of help on my journey to understand and be able to develop for the android platform, so I owe the following people my thanks for helping me to make this ROM possible.
* [user=673068]@dsixda[/user] - Initial port of CM9/CM10 for SGH-I757M
* [user=4974935]@Strange Peer[/user] - Continued development of CM10
* [user=3478918]@rukusx7[/user] - Contributor
* [user=4435341]@bijon440[/user] - Contributor
* [user=4036181]@kj2112[/user] - Contributor
* [user=5077807]@Tronith[/user] - Contributor
* [user=3651088]@Zippy Dufus[/user] - Contributor
* @formercontra - Contributor
Thanks guys you've all been so awesome to work with ;)
One last group of people to thank. It's YOU! Without all of you guys and girls who come to download our creations, there would be no reward for doing this. Thank you for downloading, providing feedback and being part of this small family. You are all appreciated ;)
XDA:DevDB Information
UNOFFICIAL CM10.2 For Bell SGH-I757M, a ROM for the Samsung Galaxy S II
Contributors
titanic_fanatic
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.0.x
ROM Firmware Required: SGH-I757M
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2013-10-05
Last Updated 2014-02-23
Reserved
Tips and Tricks
Use the Bell Flex APN. You can select it by going to:
Settings -> Wireless & Networks -> More -> Mobile Networks -> Access Point Names
This helps fix some issues with VPN and some other system services.
Logcat what is it and how do I get one?
A logcat is the system log of events that occur on your device. This log provides the developers with some useful information pertaining to crashes and other bugs you may encounter while using the ROM and/or apps running on the ROM. Getting a logcat is generally a very simple thing. Just open your terminal emulator on your phone and type the following commands without typing the $ as it denotes a command on the command line:
$ su
$ logcat -v long > /sdcard/logcat.txt
Click to expand...
Click to collapse
The first command above will ask you to grant superuser permission to the terminal emulator which you must accept. The second command will create a file at the root of your sdcard called logcat.txt and then start writing the logs to this file. Since the logcat is a continuous function, your terminal emulator will not return you to the command prompt after the second command as it will continue to write logs until you stop it by pressing the x to close the emulator.
If you are experiencing an issue with an app, then you need to do the steps above to get the logcat recording, then press your home button so that you don't close the emulator, but put it in the background. Then you do the action that causes the bug to occur and then open the emulator and terminate it to stop the log from writing. this ensures that the error is located somewhere around the end of the log and makes it easier for us to spot
What is dalvik-cache and why do I need it?
To explain dalvik cache, you must understand how an app is pieced together. An apk (android app) is like a zip file and contains a bunch of files inside. Two important files to note are the resources.arsc and the classes.dex files. They are compiled versions of the resources (images, sounds, xml files) and classes (source code files) of the app. When android boots into a ROM for the first time, and everytime you install an app, the system performs an optimization called dex optimization which means that is pulls the dex file out of the app and places it into what is called your dalvik cache. The system can then pre-load these dex files and allow the app to start quickly.
Dalvik cache is stored in two locations, at /data/dalvik-cache for user apps and at /cache/dalvik-cache for system apps. We unfortunately have a very small partition for /cache, only 100MB and this sometimes causes a side effect on first boot where it fills up to much with apps that only ever run on the first boot to setup the system and then other dex files cannot be written to the /cache partition which causes them to Force Close (FC). The trick in this situation, is to bear through the FC messages to get the system to the home screen, then reboot into recovery and Wipe Dalvik Cache from the Advanced sub-menu. This will delete all the dex files in both locations I mentioned above and will force the system to regenerate them upon reboot, and this time, those 1-time running apps don't start up and don't end up being optimized which allows the necessary dex files to be created for the apps that were FC'ing.
I have moved what I could from the system partition to the data partition to spare some extra space on /cache but this still sometimes happens, especially as the ROM's get slightly bigger every new major version.
Wow! Thanks so much. Downloading now.
iDynamics said:
Wow! Thanks so much. Downloading now.
Click to expand...
Click to collapse
Wow, you already found it and I wasn't even finished putting everything up... make sure you use the new CWM, very very very important!
Followed the instructions ( to the best of my ability ) but I'm getting a random red border flicker every so often. I'm also not seeing the 91fixoverlays script in my init.d folder.
Smooth rom so far!
iDynamics said:
Followed the instructions but I'm getting a random red border flicker every so often. I'm also not seeing the 91fixoverlays script in my init.d folder.
Smooth rom so far!
Click to expand...
Click to collapse
I totally forgot to update the build.prop with the build type, it is responsible for the red border. Either use a build.prop editor or open the /system/build.prop with a text editor and change the following line:
ro.build.type=eng
Click to expand...
Click to collapse
Change it to:
ro.build.type=user
Click to expand...
Click to collapse
You will need to reboot after making this change.
In regards to the 91fixoverlays script, I do appologize. I forgot to include it in the zip... Please download the attached 91fixoverlays.txt file and rename it to 91fixoverlays and move it to /system/etc/init.d and change it's permissions to match the other files in that directory.
Sorry for missing these two things. I will update the packages ASAP and will post a note when it's done so you know that there is no need to follow the steps in this post.
Much appreciated! No more red flickering. Thanks!
Wow! Thank you!
Sent from my SGH-I757M using xda app-developers app
This. Is. Amazing!!!!!
Downloading now, will install and report back in a bit with findings.
Thanks so much!!
Awesome. Downloading. Will report back. Thanks!
Sent from my SGH-I757M using xda premium
I'm first!! (to post, anyway).
Installed the ROM. Did a clean flash (factory reset).
Upon the boot I got "Unfortunately Bluetooth Share has stopped" but appears to be no ramifications.
ROM looks great! Feels smooth.
Will do more testing.
Thanks
Zippy Dufus said:
I'm first!! (to post, anyway).
Installed the ROM. Did a clean flash (factory reset).
Upon the boot I got "Unfortunately Bluetooth Share has stopped" but appears to be no ramifications.
ROM looks great! Feels smooth.
Will so more testing.
Thanks
Click to expand...
Click to collapse
I think this is due to our oddly small cache partition. Only 100MB as compared to the skyrocket at 300MB. Currently, I only moved four apps in the gapps package to the data partition do that their dex files don't end up in the /cache/dalvik-cache dir and instead end up in /data/dalvik-cache. I think I need to move others. I also think that it happens only on first boot without side effects because a couple of the installed apps only run on first boot, then their dex files can be deleted (I think this happens automatically).
Sent from my SGH-I757M using XDA Premium 4 mobile app
Thanks titanic_fanatic, you've breathed new life into an old phone
Sent from my SGH-I757M using Tapatalk 2
Only issue I've run into so far is that auto rotate doesn't seem to work :-/
Sent from my SGH-I757M using XDA Premium 4 mobile app
I enabled kernel same page merging under performance and no lock screen issues.
Sent from my SGH-I757M using xda app-developers app
rukusx7 said:
I enabled kernel same page merging under performance and no lock screen issues.
Sent from my SGH-I757M using xda app-developers app
Click to expand...
Click to collapse
Cool, I'll give that a try. Anyone else having auto-rotation issues?
Sent from my SGH-I757M using XDA Premium 4 mobile app
Rotation is not working for me, though I always keep it on portrait anyway so I am not complaining.
Rotation doesn't work here, and every so often I run into spells where the only button that works is the home button and haptic feedback stops working all around. A reboot fixes it and it seems random. Other than those few things this is soooooo smooth. I'm happy. Thanks so much!
Sent from my SGH-I757M using xda premium
Fix for Sensors
Hey guys, to fix the sensors, download this attachment sensors.default.so.txt and rename it to sensors.default.so, move it to /system/lib/hw and give it the same permissions as the other files in that directory, then reboot and your sensors should be working
Works now! Thanks ya muchly.
Sent from my SGH-I757M using xda premium
** DoPa6 (AOSP - Marshmallow) ** is now available - see this post for details and downloads
Click to expand...
Click to collapse
** DoPa5 (AOSP - Kitkat) ** is now available - see this post for details and downloads
Click to expand...
Click to collapse
DoPa v2.7 is a ROM for Sero 7 Pro owners everywhere. Whether bought in the US, Britain, Australia, Germany, or elsewhere, your tablet is supported.
The ROM starts with well-tested AOSP code and adds core functions where needed but skips the frills that are easy to add on - and remove when they cause problems. It's aimed at people who want to choose their own features and not have them imposed by the developer.
New / Improved
International Support - a single ROM for all Sero 7 Pros sold worldwide
New in v2.7 - support for the German model of the Sero 7 Pro (m470bsg)
Speed Control - a unified kernel provides speed when you need it and stock performance when you don't.
Use the new Performance page in the Settings app to control it
exFAT - support has been moved into the kernel for improved performance
Boot Animation - a handsome new DoPa animation thanks to @mikembley, our first-ever UK user
To get you started customizing your ROM, v2.7 offers these add-ons:
built-in: SuperSU, Xposed Installer GravityBox, Phab7
optional: have your tablet claim it's a Nexus7 to get more apps in PlayStore
The package does not include any Google apps (e.g. Playstore). See this thread for links to the latest GApps packages.
Installation
UK / AU / DE / First-time Users
If you're upgrading from a stock ROM (any variety), please click the "show content" button and read the instructions very carefully - they're long but your tablet's continued good health may depend on it!
STEP 1: Install Philz Touch Recovery
Users outside the US must use this version of Philz to install the ROM - neither the stock recovery nor other versions of CWM or Philz will work. Users in the US should use it just to avoid problems.
Stock Recovery
If you still have the stock recovery program you'll have to use the 'fastboot' program to install Philz. On Windows, this requires installation of the 'ADB' USB drivers while in fastboot mode (see below). A package containing the drivers, fastboot, adb and other files can be found in the 2nd posting on the DoPa Stock ROM thread. Note: there are several batch files (*.bat) in the package - do NOT run them.
put fastboot.exe in a convenient directory, then unzip sero7pro-philz6.58.0-dopa-v2.7.zip and put the file philz.img in the same directory (you won't need the other files)
unplug any USB cable, then press and hold Power+VolumeUp; the word "fastboot" should appear on the screen (nothing further will appear)
plug the USB cable from your PC into the tablet, then install the driver (open Device Manager, right click on "Other Devices->Fastboot", then select "Update Driver Software")
after installing the driver, open a command prompt ("DOS window") and change to the directory containing the files
enter fastboot flash recovery philz.img
when done, force the tablet off, remove the USB cable, then reboot into recovery: Power+VolumeDown - you should see the word "recovery", then the Philz menu
CWM
If you have CWM installed, copy sero7pro-philz6.58.0-dopa-v2.7.zip to an SD card, insert it in the tablet, then:
remove any USB cable, then boot into recovery: Power+VolumeDown
select "Install Zip", then "Choose zip from /storage/sdcard1"
select the file, then OK the selection
when done, back out to the main menu, select "Advanced options", then "Reboot recovery"
after the initial "recovery" screen, you should see the Philz menu
Regardless of how you install Philz, the result should be the same. If it boots OK, compatibility is assured
STEP 2: Backup
I can't emphasize this enough: you must make a backup of your existing ROM. If something goes wrong, there's no way to get your device working again other than to restore it using the backup you've made. There's also another reason to do a backup: before installing the new ROM, you will have to reformat your /data partition. This will wipe out your apps, your settings, and most importantly, all the music/photos/etc stored on your "internal SDcard". These last items can be restored if you follow the instructions below:
ROM
You must do your backup onto a real SD card that you can remove because your "internal SDcard" will be erased in the next step. In fact, it wouldn't be a bad idea to do two backups (preferably to different cards) just in case one is faulty.
on Philz main menu, select "Backup and Restore"
next, select "Backup to /storage/sdcard1" (the 6th item on that menu)
if there's enough space on the card, the backup will start without any further prompt; it could take anywhere from 3 to 15+ minutes depending on the amount of data and the speed of your card
if needed, you can enable compression to create a smaller backup: select "Misc Nandroid Settings -> Default Backup Format -> tar + gzip", then on the previous menu, tap on "Compression" to set the appropriate level
Internal SD card
This is optional but worthwhile if you have files you value stored on the tablet:
on Philz main menu, select "Backup and Restore"
next, select "Custom Backup to /storage/sdcard1" (the 9th item on that menu)
on the next screen, deselect everything, then select "Backup /data/media" (the next-to-last item)
finally, select "Start Custom Backup Job"
STEP 3: Install the DoPa ROM
Before you begin, you may want to download a Google Apps ("Gapps") package that you can install after the ROM. See this thread for a selection of packages. To avoid complications, I'd suggest choosing the "Nano Modular Package" to get just the basics - you can always upgrade later. Put your Gapps package along with the ROM zip on an SD card and insert it into the tablet - you can use the same card you're using for your backups.
on Philz main menu, select "Wipe and Format Options", then "Custom Format Options"
select "format /data and /data/media (/sdcard)" (the 8th item), then OK your choice
back on the main menu, select "Install Zip -> Choose zip from /storage/sdcard1"
select sero7pro-aosp444-dopa-v2.7.zip, then OK your choice - the install process should take about 40 seconds
next, install your Gapps package
return to the main menu, select "Reboot System Now", then hold your breath for the next 3-4 minutes
the Hisense screen should be up for less than a minute, followed by the DoPa boot animation for another 2-3 minutes
when the Google setup screen appears, you'll probably get a warning that "Bluetooth Sharing" has stopped - after you clear it, you'll never see it again
If the boot animation is still running after 5+ minutes, force the tablet off, then reboot. If that doesn't fix it, try formatting /data again. If it still doesn't work, restore your tablet from your backup ("Backup and Restore -> Restore from /storage/sdcard1"), then post a message here. If everything works out as hoped for, re-read the first posting in this thread for details on some of the features (and problems) of this ROM.
Upgrades
While any SELinux-enabled version of CWM or TWRP can be used to install the ROM, the companion Philz Touch CWM-based recovery is highly recommended if you use exFAT-formatted SD cards.
from DoPa AOSP Kitkat ROMs (v1.0-v2.6) - no need to wipe or format anything!
from pre-Kitkat (v4.4.x) or any CM-based ROMs - wipe your /data partition before installing to avoid unnecessary problems.
install sero7pro-aosp444-dopa-v2.7.zip
- the installer will wipe (but NOT format) /cache and dalvik-cache for you
install your preferred Gapps package
- upgraders: this is required to prevent your downloaded Google apps from crashing
optionally, install the Nexus7 spoof (sero7pro-nexus7spoof-dopa-v2.7.zip)
reboot (ignore any "fix root" prompt - it's incorrect)
f2fs / ext4 Migration
This DoPa ROM gives you the flexibility to format any of your built-in partitions using either the f2fs or ext4 file systems.
As part of your install - or at any time - you can switch formats without losing any data. Click "show content" for instructions.
If you haven't already installed Philz Touch Recovery, please do so first. Philz has gotten complicated, so read this carefully!
make a nandroid backup to your external SD card
select Wipe and Format Options, then Custom Format Options
select toggle f2fs <-> ext4 migration
- be sure there's a confirmation message at the bottom of the screen
select each partition you want to convert or wipe, then select the format and OK your choice
Important: to convert your /data partition, you must select format /data and /data/media (/sdcard)!!!
use Custom Restore from /storage/sdcard1 to restore the contents of the partitions you reformatted
Notes
Speed Control - this version uses a redesigned kernel that caps processor speeds at stock levels during start-up, then adjusts them once the tablet is up and running. Go to Settings->Performance to enable this feature, and to set the top speeds for the CPU (1.0-1.5ghz) and GPU (448-520mhz). When disabled,the processor will remain at stock speeds (1.2ghz/448mhz) unless changed by a 3rd-party app.
Encryption - the first time you formatted your /data partition, you lost the ability to encrypt your tablet's data. Using the companion Philz Touch Recovery to reformat /data (using either filesystem) will restore that ability. To preserve your existing data, do a backup first, then restore just /data when done. Note: you must select "format /data and /data/media (/sdcard)" when reformatting.
OTG Charging Support - this kernel supports charging the tablet while an external device (flash drive, keyboard, etc.) is attached to the USB port. This feature requires either an OTG 'Y' cable or an OTG USB hub, and the AC adapter that came with the tablet. For this to work, power must be connected to the cable or hub before plugging it into your tablet. The OTG device(s) can be attached/detached at any time.
WiFi Display (a.k.a. Miracast) - video works but its performance may depend upon your TV; audio does not work.
Bluetooth Sharing - on the initial boot, this service will FC due to a timing issue. The system will restart it and you should never see this error again.
Added/Changed in v2.6
International Support - added support to the kernel for the British and Australian models of the Sero 7 Pro
Overclocking - replaced separate standard and overclocked kernels with a unified kernel that uses less power when overclocked; added a new Performance page to the Settings app to control it
exFAT Support - moved exFAT support to the kernel for improved performance
Boot Animation - added a custom boot animation created by @mikembley
Added/Changed in v2.51
Flexible Formatting - added F2FS support for the /thirdparty and /mnt/modem partitions
Bug Fix - enabled Philz Touch Recovery to format the /thirdparty and /mnt/modem partitions using EXT4
Added/Changed in v2.5
Flexible Formatting - enabled use of either F2FS or EXT4 for any of the built-in partitions
External Storage - added support for F2FS, and for devices formatted without a partition table (i.e. Windows-style "super-floppies")
Android version - upgraded from AOSP 4.4.4_r2 to AOSP 4.4.4_r2.0.1
Recovery - added a DoPa version of Philz Touch Recovery
Added/Changed in v2.1
SD Cards - added support for SD cards formatted with the NTFS or exFAT filesystems
Android version - upgraded from AOSP 4.4.4_r1 to AOSP 4.4.4_r2
Added/Changed in v2.0
Google Now - voice activation (i.e "OK Google") now works in the Google Now launcher
kernel - added OTG charging support.
Credits
ziddey
randomblame
davepmer
the CM team
Downloads
sero7pro-aosp444-dopa-v2.7.zip the full ROM
sero7pro-nexus7spoof-dopa-v2.7.zip identify tablet as a Nexus7 to (possibly) show more apps in PlayStore
sero7pro-philz6.58.0-dopa-v2.7.zip a customized version of Philz Touch CWM-based Recovery v6.58.0
sero7pro-format-thirdparty.zip - only needed if you are downgrading from DoPa6 (Marshmallow) to previous versions (i.e. this one)
GPL Notice: the source code for this kernel is available at https://github.com/dolorespark/android_kernel_hisense_m470bsa on the 'master' branch.
Thanks man been running it since day one no problems and very stable.
Can We call these the Semi OFFICIAL ROM ?
I installed v1 after it booted up play store wasn't installed. Did any one else experience this? I did a dirty flash and a full wipe.
Sent from my Sero 7 Pro using xda app-developers app
How much free space should there be on a system after a fresh install?
datboy143 said:
I installed v1 after it booted up play store wasn't installed. Did any one else experience this? I did a dirty flash and a full wipe.
Sent from my Sero 7 Pro using xda app-developers app
Click to expand...
Click to collapse
I followed the instructions and noticed the same thing and gmail kept crashing. Flashing the latest gapps will fix all of that. I still have some testing to do and will report back later.
Gazoo119 said:
I followed the instructions and noticed the same thing and gmail kept crashing. Flashing the latest gapps will fix all of that. I still have some testing to do and will report back later.
Click to expand...
Click to collapse
Ok will do thanks
Sent from my SGH-I777 using xda app-developers app
GPS and Google music
I noticed on version 0 that GPS could take awhile to lock on, and if you turned it off and back on that sometimes it wouldn't lock on at all. I also noticed an issue when running Google music where it would freeze and cause the tablet to reboot. Anyone having these issues on the new build? Otherwise, this is one of the cleanest KitKat builds I've used
gotshores said:
I noticed on version 0 that GPS could take awhile to lock on, and if you turned it off and back on that sometimes it wouldn't lock on at all. I also noticed an issue when running Google music where it would freeze and cause the tablet to reboot. Anyone having these issues on the new build? Otherwise, this is one of the cleanest KitKat builds I've used
Click to expand...
Click to collapse
Don't use Google music but I do use scanner radio and whenever I switched streams the tablet would freeze and I would have to hold the power button to turn the tablet off.
Now its working like it should. So this latest build might fix Google music.
Another issue I was having is when I opened the calendar it would not close hitting the back button. Its closes fine now.
The GPS doesn't seem to load any slower for me than it did with the stock ROM but I don't use it much.
Anyway I would recommend trying this latest build. Just make sure you wipe cache and dalvik cache and flash the latest gapps. Everything should still be the same as before when you boot with the new ROM and hopefully you will notice some improvements.
---------- Post added at 07:31 PM ---------- Previous post was at 07:22 PM ----------
dolorespark said:
This is a plain-vanilla build of KitKat for those who prefer their enhancements added on rather than built in.
Click to expand...
Click to collapse
Just want to thank you for fixing the sound bug. V4A is working perfectly and as far as I can tell so is everything else. I will keep testing and if I run across anything strange I will post here. Your work on this is very much appreciated
dolorespark said:
This is a plain-vanilla build of KitKat for those who prefer their enhancements added on rather than built in. The only changes to the AOSP and kernel code are those needed to ensure compatibility or to enable standard features Hisense omitted (e.g. USB-OTG support). Because it relies on well-tested AOSP code, it is likely the most stable KitKat ROM available for this tablet. For the same reasons, it is almost certainly not the fastest KitKat ROM either.
To make it more functional, the package includes a handful of apps most people find useful: SuperSU, ES File Explorer, Xposed Installer, GravityBox, and my Phab7 UI switcher. To avoid the wrath of Google, it does not include any GApps; see this thread for links to the latest packages.
Installation
Having an SELinux-enabled version of CWM or TWRP installed is a prerequisite. You can find versions built by randomblame here or by davepmer here.
If you're upgrading from v0 of this ROM, clearing cache and dalvik-cache should suffice. Otherwise, do a full wipe of both your data and cache partitions. As always, a backup of your existing setup is recommended.
Notes
All features should be present and work as expected with these exceptions:
WiFi Display (a.k.a. Miracast) - video is enabled but very slow; audio is disabled because it doesn't work and generates 45 error messages per second when enabled
SELinux - the kernel runs in permissive mode due to missing entries in its configuration.
As these issues are resolved, the ROM will be updated accordingly.
Credits
randomblame
davepmer
the CM team
Download
sero7pro-aosp442-dopa-v1.zip
GPL Notice: the source code for this kernel is available at https://github.com/dolorespark/android_kernel_hisense_m470bsa on the 'master' branch.
DoPa
Click to expand...
Click to collapse
Thanks for the rom. After flashing the rom I rebooted, powered down and installed gapps. On reboot I got a message about root access possibly being lost and offering to fix it, I said yes. First time I get that, is it ok? (It seems to be working ok)
chopin_k said:
Thanks for the rom. After flashing the rom I rebooted, powered down and installed gapps. On reboot I got a message about root access possibly being lost and offering to fix it, I said yes. First time I get that, is it ok? (It seems to be working ok)
Click to expand...
Click to collapse
This is normal..
Sent from my Sero 7 Pro using XDA Premium 4 mobile app
enfermo said:
Can We call these the Semi OFFICIAL ROM ?
Click to expand...
Click to collapse
Generic, yes - (semi-)Official, no.
datboy143 said:
I installed v1 after it booted up play store wasn't installed.
Click to expand...
Click to collapse
Gazoo119 said:
I followed the instructions and noticed the same thing and gmail kept crashing. Flashing the latest gapps will fix all of that.
Click to expand...
Click to collapse
As noted in the OP, none of the GApps (e.g. Playstore) were included in this ROM. I have updated its verbiage to be even more explicit. As to GMail crashing, I'm a little puzzled how that could happen if it wasn't included - did you mean the generic Email app?
gotshores said:
I noticed on version 0 [...] an issue when running Google music where it would freeze and cause the tablet to reboot. Anyone having these issues on the new build?
Click to expand...
Click to collapse
I hope not: v1 wouldn't have been released if that bug were still present. The problems you encountered were caused by enabling sound effects, either built-in or 3rd-party - the notes for v0 said as much. Perhaps Google Music enabled them automatically.
chopin_k said:
Thanks for the rom. After flashing the rom I rebooted, powered down and installed gapps. On reboot I got a message about root access possibly being lost and offering to fix it, I said yes. First time I get that, is it ok? (It seems to be working ok)
Click to expand...
Click to collapse
I ran into that too - and something even odder. SuperSU's su and daemonsu program files should have a flag that marks them as authorized to give root access. That flag is now missing but I can still get root whenever needed. I don't know if this is to be expected with SELinux in place or just something specific to SuperSU. I'll investigate...
tinybeetle said:
How much free space should there be on a system after a fresh install?
Click to expand...
Click to collapse
After installing the ROM, the "Gapps Standard" package, and Antutu, Settings->Storage says I have 5.48gb available. This is the free space on your /data partition and includes the space used by your emulated SD Card (which is actually just a subdirectory of /data).
"Smart ass alert"
Not only was playstore not installed, it doesn't give me the winning lottery numbers for next week! What gives?
Ok, being serious, Thank you for your time and effort. This weekend I am going to finally give this a try.
Dolorespark,
I haven't messed with any sound effect settings, so it must be Google Music messing with things. Have you noticed any issues with GPS? I can run any of the other rom's, including CM11, and it locks on immediately, but it seems random with AOSP. Sometimes I'll wait a coupled of minutes and it'll get a lock, and other times it won't lock on at all. Anyway, thanks for all you do. I'll keep testing, and keep my trusty backup of DOPA v2.
Working brilliantly so far. V0 to V1 smooth after adding gapps back to the mix. Sounds like time to reinstall V4A and sync some commute podcasts!
Thanks Dolorespark!
envygreen said:
Working brilliantly so far. V0 to V1 smooth after adding gapps back to the mix. Sounds like time to reinstall V4A and sync some commute podcasts!
Thanks Dolorespark!
Click to expand...
Click to collapse
intermittently get google services has stopped.... only that but everything looks good so far.... anything to fix google services stopping? also had a root fix need after rebooting, did yes and everything is ok... thanks DOPA....
dolorespark said:
I hope not: v1 wouldn't have been released if that bug were still present. The problems you encountered were caused by enabling sound effects, either built-in or 3rd-party - the notes for v0 said as much. Perhaps Google Music enabled them automatically.
Click to expand...
Click to collapse
I had this issue on v0 as well and it seems that it's not gone yet. I only wiped dalvik & cache coming from v0 so I'm not sure if that's part of the problem, but I'm still experiencing the Google Play Music crash. It only seems to crash when playing content that hasn't already been cached locally. Attached is a logcat.
dolorespark said:
As noted in the OP, none of the GApps (e.g. Playstore) were included in this ROM. I have updated its verbiage to be even more explicit. As to GMail crashing, I'm a little puzzled how that could happen if it wasn't included - did you mean the generic Email app?
Click to expand...
Click to collapse
No it was gmail. It would close followed by the message "unfortunately this application has closed" or something like that. It wasn't really crashing but rather would not stay open. Anyway flashing the latest gapps fixed that and all is good for me so far.
I played with the tablet extensively last night and did not experience any problems. Even movies, streaming or local using XBMC play using a bluetooth headset. There is no stuttering as there was in all of the previous Jelly Bean roms, stock....DoPa1 and DoPa2. I don't know if that was a KitKat fix or what but I am very happy with the stability of this rom and the fact the XBMC bluetooth bug was fixed is icing on the cake. Of course V4A makes it even better.
I will continue to run the rom and will post if I find any bugs. Thanks again.:good:
Been running since v1 was posted. Have to say the music bug is no more! Listening to lucky mixes all day today and email, g+, and everything my wife and kids have done on it. No problems! Thanks You have really taken your time to make this rom perfect!!!!
Gazoo119 said:
[gmail] would close followed by the message "unfortunately this application has closed" or something like that. It wasn't really crashing but rather would not stay open. Anyway flashing the latest gapps fixed that and all is good for me so far.
Click to expand...
Click to collapse
nccruz said:
intermittently get google services has stopped.... only that but everything looks good so far.... anything to fix google services stopping?
Click to expand...
Click to collapse
Did you use the latest GApps package? As Gazoo119 noted, that fixed a problem with another app that uses Google Play Services. If the problem persists, you may want to go to Apps->Google Play Services, then tap the "Manage space" button. On the next screen it lets you clear all data.
gotshores said:
Have you noticed any issues with GPS? I can run any of the other rom's, including CM11, and it locks on immediately, but it seems random with AOSP. Sometimes I'll wait a coupled of minutes and it'll get a lock, and other times it won't lock on at all.
Click to expand...
Click to collapse
I hadn't tried GPS at all until you mentioned it. I installed Google Maps but couldn't get a lock at all. It's raining here, so I couldn't get fully in the clear. Instead I sat in my car and it still did nothing. Finally, I forced-stopped the app, cleared data and cache, then retried. This time it only took a few seconds to find me. I then turned off GPS, rebooted, and moved to my semi-covered patio. After getting everything going again, it took 10-15 seconds to get a rough fix (off about 70 feet) and it continued to hold it even after I went inside. You may want to try clearing Maps' data (if that's what you're using) to see if that helps.
unomar said:
I had this issue on v0 as well and it seems that it's not gone yet. I only wiped dalvik & cache coming from v0 so I'm not sure if that's part of the problem, but I'm still experiencing the Google Play Music crash. It only seems to crash when playing content that hasn't already been cached locally. Attached is a logcat.
Click to expand...
Click to collapse
Whatever crash you're seeing isn't the one that I fixed. That one was produced a full-blown hardware crash with a register dump. Your logcat doesn't show a register dump or even a Java runtime exception dump. There were two errors that caught my eye but I don't know if either would cause an "Unfortunately..." popup.
Code:
04-08 09:40:24.213 E/DownloadTaskImpl( 3156): Download failed because of IO Error: Socket closed
04-08 09:40:24.213 W/DownloadTaskImpl( 3156): Experienced error when trying to download: [mId=[7871, DEFAULT] mTrackTitle="Le onde" mRemoteId=9ea5817b-9753-348e-af52-ea7c0947c6cb mSourceAccount=1954430662 mPriority=3 mOwner=MUSIC_PLAYBACK mSeekMs=0 mRetryAllowed=true mFileLocation=[mFullPath=/data/data/com.google.android.music/files/music/mplayback_7871.tmp mStorageType=INTERNAL mCacheType=2] mExplicit=false]
Here, the (software) communication link being used to download "Le onde" was broken. Later on, you got this error:
Code:
04-08 09:40:57.133 I/wpa_supplicant( 618): wlan0: CTRL-EVENT-DISCONNECTED bssid=00:1a:30:e4:64:00 reason=0
[...]
04-08 09:40:59.803 E/DownloadTaskImpl( 3156): Download failed because of IO Error: recvfrom failed: ETIMEDOUT (Connection timed out)
04-08 09:40:59.803 W/DownloadTaskImpl( 3156): Experienced error when trying to download: [mId=[363, DEFAULT] mTrackTitle="Black Hole Sun" mRemoteId=8076a782-8454-3fd8-899d-213bb23836ac mSourceAccount=1954430662 mPriority=0 mOwner=MUSIC_PLAYBACK mSeekMs=0 mRetryAllowed=true mFileLocation=[mFullPath=/data/data/com.google.android.music/files/music/mplayback_363.tmp mStorageType=INTERNAL mCacheType=2] mExplicit=true]
This download failure is a lot easier to understand: your WiFi connection had dropped. I don't know that either of these is something I can fix. As above, you may want to try the obvious fixes if you haven't done so already: use the most recent GApps package, clear the app's cache and data, and play with the app's caching options.
********** ANNOUNCEMENT - Beta Enrollment without Banner (OPEN NOW - Nov 16,17) - Read More Here
INTRODUCTION - Hello all. Now Samsung wants us to go to Members app and keep looking for banner to sign up for Android 11, One UI 3 Beta . It went live October 27th, 10:20 PM EST, As fate would have it, i went to sleep early, i missed it and the banner refused to show up for me in the morning. Download was only showing up for people with unlocked variants on ATID firmware.
DISCLAIMER / NOTICE - Flashing is always risky. I am not responsible for anything that may happen to your device including but not limited to it turning against you, making you its slave and sucking you into the Matrix.
This post is a collection of wisdom, research and hard work of many people over many years across many forums and not just XDA. I will try to credit and link to their original posts.
TIP -Keep in Notice -This SHALL NOT Factory Reset Your Device or Format Data, it is still a good idea to Take Back Up - Just a Suggestion - Always have a latest Back Up
******** UPDATE - It seems ATT devices are getting wiped now if its CSC or the Sim remains to be tested.
i don't have ATT hence cant verify but in case you have an Unlocked device (N986U1) with ATT sim, then, removing sim and Changing the CSC to XAA/XAA/XAA before sideloading Beta is advisable.
PROBLEM STATEMENT - Missed the One UI 3.0, Android 11, Beta Sign up Banner in Members app or got the banner but didn't get the download and I really want it NOW.
Not sure if you want it now? - Find the BETA CHANGELOG HERE
GRAB YOURSELF A COFFEE / DRINK, because depending on where you at and how fast you/your internet speeds/your Machine is this may take anywhere between 7 to 45 MinsSOLUTION -
1. Pre-Requisites - Make sure Following Conditions are met before you start
You need a PC/Laptop along with your phone and USB Cable.
You need ADB installed, you can use ADB on Linux too - NOTE If your ADB Tools are not working, download my ADB Folder called platform-tools. Then extract it somewhere easy to remember/ find, like desktop
Remember the Location of the folder where you have ADB installed / Location of platform-tools- This is the location containing adb.exe file.
You may or may not need ADB/USB Drivers if any errors in ADB please Download Drivers from here and Install on your PC.
This following one step is relevant Only for flashing Beta 1
Use Odin to Flash Unlocked (SM-N986U1) ATID Firmware if you are not on that. Refer this thread to get your Firmware.
For changing Firmware from N986U to N986U1 and / or GUIDE TO FLASHING USING ODIN Refer This thread
______________________________________________________________________________________________________________________________________________________________
2. Now Download the relevant Beta File that you intend to flash - note that to Sideload Beta 2 you need to be on Beta 1 first. Mandotory Sequence = Beta 1>>Beta 2>>Beta 3 There is no skipping versions possible here.
BETA 1 (ZTGJ) Get the Beta1.zip file from here Thanks to @thatotherguy.. for the original zip.
BETA 2 (ZTK1) Get the Beta2.zip file from here
BETA 3 (ZTK9) Get the Beta3.zip file from here
______________________________________________________________________________________________________________________________________________________________
*************** Apply Update from SD card failed for me (Feel free to try that ) but here we will be using ADB Sideload Feature in Stock Recovery*************
HOW TO - Using ADB Sideload - Windows -The Process is Similar for Linux too
1. Copy the downloaded zip file to the ADB Folder (From Pre-Requisite step). ADB Folder is the folder containing ADB.exe it might be named differently for you (The one i have posted is called platform-tools)
2. Open Command Prompt Window as Admin.
3. Type in
Code:
cd Copy-paste the location of your ADB folder here
4. Connect the phone to the PC using USB Cable and Unlock it. Go to Developer Options and Switch on USB Debugging.
To turn on developer options go to Settings>>About Phone>>Software Information>> Then tap the build number 7 times - Developer options will appear at the bottom of Settings Menu
5. On your PC Type in Command Prompt
Code:
adb devices
6. Give Permission that appears on your phone and PC - I check the box Always Allow, you should do the same.
7. Now type the following and the phone will reboot to recovery.
Code:
adb reboot recovery
8. Once you see recovery on your phone Use Volume Keys to scroll down to Apply Update from ADB and press Power Button.
9. Now on your PC, Type the following in Command Prompt; this is just to be sure, it should show the device name with Sideload next to it.
Code:
adb devices
10. Type
Code:
adb sideload Beta1.zip
For Beta 2 use adb sideload beta2.zip Similarly For Beta 3 use adb sideload beta3.zip. Use whatever you have named the zip file. Most people use update.zip. The commands here are for the attached files in this post and their naming convention.
11. Wait for it to finish and Done
2nd (Second) BETA Is Out- How To Do this if you are not able to Enroll for Beta and or don't see update to download even after Enrolling
Second Beta should be flashed After Beta 1. Second Beta (ZTK1) can not be flashed unless you have Beta 1 (ZTJG).
To flash follow the same instructions as above only this time the prerequisite is you have to be on the 1st Beta. Download the 2nd Beta (ZTK1) Zip File to flash Here Thanks to @hayabusa1300cc for the FOTA Link.
3rd (Third) BETA Is Out- Nov 16, 2020 Do this if you are not able to Enroll for Beta and or don't see update to download even after Enrolling
Third Beta should be flashed After Beta 1>>Beta 2. Third Beta (ZTK9) can not be flashed unless you have Second Beta (ZTK1). Second Beta (ZTK1) can not be flashed unless you have Beta 1 (ZTJG).
To flash follow the same instructions as above only this time the prerequisite is you have to be on the 2nd Beta. Download the 3rd Beta (ZTK9) Zip File to flash Here
OPTIONAL THINGS TO DO POST UPDATE
If you want to enable RCS (In the Native SMS app) and Native Video calling (This feature is on Tmobile) have a look at this thread.
Check out this Guide Service Mode and CSC Guide/Enable LTE/5G Bands and Services/5G Low Band on U1 by @mellojosh
TROUBLESHOOTINGSome people might run into "cant read update.zip" error for that we need to make ADB Large address aware. Follow the Steps Here I use the Advanced mode as it shows the true false flags. - This wont happen if you use the ADB Tools provided by me above under the Pre-requisites section.
************** FOR FUTURE BETA OTA Questions / Bugs - Observations and some more info - Go Here ********Please dont ask questions without reading.
QUESTIONS, HELP & SUPPORT ?? - See if I am Online here on this Live Chat
If it helped HIT THAT THANKS BUTTON, what are you waiting for ? Cheers !!
Suggest you rename the title for which device it's for as it's not for every snapdragon (right?)
I get "adb: failed to read command: No error"
ekerbuddyeker said:
Suggest you rename the title for which device it's for as it's not for every snapdragon (right?)
Click to expand...
Click to collapse
I flashed on an Unlocked one so there is no way for me to tell if this can be flashed on N986U since so many people have flashed Unlocked firmware on the U devices using Odin (One confirmed guy flashed unlocked firmware on Verizon locked device and got the Beta banner) hence i think this will work for all Snapdragon devices. Give it a try and see. Just that before you try this make sure you are on ATID firmware.
d_ganggreen said:
I get "adb: failed to read command: No error"
Click to expand...
Click to collapse
Use a different USB Cable. A good quality one preferably. Also try changing USB port.
Can i install this on sm n 9860 version and does google pay and samsung pay beta work?
warriorvibhu said:
Use a different USB Cable. A good quality one preferably. Also try changing USB port.
Click to expand...
Click to collapse
Hmm, still getting same. Tried 3 cables including the one that came with the phone and both usb ports on my computer.
d_ganggreen said:
Hmm, still getting same. Tried 3 cables including the one that came with the phone and both usb ports on my computer.
Click to expand...
Click to collapse
Are you on ATID Firmware?
warriorvibhu said:
Are you on ATID Firmware?
Click to expand...
Click to collapse
I am, I odin flashed it a few weeks ago.
1gorelo said:
Can i install this on sm n 9860 version and does google pay and samsung pay beta work?
Click to expand...
Click to collapse
Too early in the morning to go out and test that. This is Beta and i have already encountered some bugs. So you have to be up for that.
Good Lock wont work, gesture navigation is buggy, you can not even apply wallpapers from the Galaxy Themes app.
Wallpaper Service on the other hand is greatly improved. Fingerprint sensor is much faster.
d_ganggreen said:
I am, I odin flashed it a few weeks ago.
Click to expand...
Click to collapse
My friend there are so many reasons why that error can happen. Sometimes you might have to change the ADB version. I am attaching the platform-tools i used. Extract this zip inside folder on desktop and try. If that doesnt work you might need to update ADb/Samsung drivers. Let us know if this works.
warriorvibhu said:
My friend there are so many reasons why that error can happen. Sometimes you might have to change the ADB version. I am attaching the platform-tools i used. Extract this zip inside folder on desktop and try. If that doesnt work you might need to update ADb/Samsung drivers. Let us know if this works.
Click to expand...
Click to collapse
Thank you! Whatever it was, that worked. I am able to get it running with your tools. I am running it now.
CHANGELOG - Android 11_OneUI 3 Beta
************ Notice: This changelog is compiled from various different resources online, verification of these features rests with the users **********
Code:
[COLOR="SeaGreen"][CENTER]BETA CHANGELOG[/CENTER][/COLOR]
[B]Home screen[/B]
– Touch and hold an app to add an associated widget
– Turn the screen off by double-tapping on an empty are of the Home screen. You can turn this on in Settings > Advanced features > Motion and gestures.
Lock screen
– Dynamic Lock screen now has more categories, and you can select more than one.
– Lock screen widgets are improved.
[B]Contacts, Phone and Call Background[/B]
– Added the ability to edit multiple linked contacts at one time.
– Added an option to help you quickly delete duplicate contacts.
– Enhanced the search experience.
– Extended the storage period of the Trash bin from 15 to 30 days.
– Added the ability to customize the call screen with your own pictures and videos.
[B]Messages[/B]
– Created a Trash bin to store recently deleted messages.
– Call & Text on other devices
– Added the ability to turn Call & text on other devices on or off with Bixby Routines.
[B]Calendar[/B]
– Events with the same start time are now shown together in month and agenda view.
– Reorganized options for adding and editing events.
– Improved layout for full screen alerts.
[B]Reminder[/B]
– Improved layout for full screen alerts
[B]Camera[/B]
– Improved auto-focus and auto exposure functionality and usability.
– Improved stabilization when taking pictures of the moon at high zoom levels.
[B]Photo editor[/B]
– Added the ability to revert edited pictures back to their original versions.
[B]Bixby Routine[/B]
– Grouped preset routines help you get started quickly and learn how to build your own routines easily.
– You can now see what actions are reversed when a routine ends.
– New conditions have been added, such as a specific start time, the disconnection of a Bluetooth device or Wi-Fi network, a call from a specific number, and more.
– New actions have been added, including talking to Bixby and accessibility actions.
– You can add a customized icon for each routine and add routines to the Lock screen for quick access.
[B]Digital wellbeing and Parental controls[/B]
– Added trends to your weekly report. You can see how your usage has changed since the previous week and check your usage time for each feature.
– Added phone usage time while driving to the weekly report.
– Added a lock screen widget so you can check your screen time without unlocking your phone.
– Added separate profiles for personal and work modes so you can track your screen time separately.
[B]Internet[/B]
– Added ability to block websites from redirecting you when you tap the Back button.
– Added warnings and blocking options for websites that shot too many pop-ups or notifications.
– Rearranged menus to make things easier to find.
– Added several new add-ons, including one that translates websites.
– Added option hide the status bar for a more immersive browsing experience.
– Increased maximum number of open tabs to 99.
– Added ability to lock and reorder tabs.
– Improved design for tab bar which is now supported on all devices.
– Ended support for Samsung Internet edge panel.
[B]Quick panel[/B]
– See your conversations and media more conveniently in their own sections when you swipe down from the top of the screen.
[B]AOD[/B]
– Always On Display widgets are improved.
[B]Accessibility[/B]
– Get quick access to the most important accessibility settings during device setup.
– Get recommended accessibility features based on what you use.
– Set the Accessibility shortcut more easily in settings.
– Sound detectors now work with your SmartThings devices such as TVs and lights to give you more visible alerts when the doorbell rings or a baby is crying.
[B]Samsung Keyboard[/B]
– You can find the keyboard in settings more easily under General management in Settings, and the settings have been reorganized to put the most important ones first.
Samsung DeX
– You can now connect to supported TVs wirelessly.
– New touchpad multi-gestures let you change screen zoom and font size more easily.
Feel free to add anything else that you observe.
warriorvibhu said:
Wohooo Fingers Crossed. Did it finish ?
Click to expand...
Click to collapse
Yes it did, running 3.0 beta now!
warriorvibhu said:
I flashed on an Unlocked one so there is no way for me to tell if this can be flashed on N986U since so many people have flashed Unlocked firmware on the U devices using Odin (One confirmed guy flashed unlocked firmware on Verizon locked device and got the Beta banner) hence i think this will work for all Snapdragon devices. Give it a try and see. Just that before you try this make sure you are on ATID firmware.
Click to expand...
Click to collapse
I'm on n9860 which is a snapdragon. I'm not sure if it's the same. Anyone want to try?
My US unlocked stuck at 16% when sideloading? Is it normal?
jianansong said:
My US unlocked stuck at 16% when sideloading? Is it normal?
Click to expand...
Click to collapse
Since how long ?
Which step are you at?
warriorvibhu said:
Since how long ?
Which step are you at? (See Pics)
Click to expand...
Click to collapse
On my phone, it shows "Verifying updte package..."
On the adb, it shows serving update.zip 16%.
It has been there for at least 20 minutes... Do I need to cancel and restart?
I used the uploaded adb and the first link for update.zip.
jianansong said:
On my phone, it shows "Verifying updte package..."
On the adb, it shows serving update.zip 16%.
It has been there for at least 20 minutes... Do I need to cancel and restart?
I used the uploaded adb and the first link for update.zip.
Click to expand...
Click to collapse
Yes thats too long Cancel and restart, It took me 97.5 seconds to verify the package.
Your ADB is fine dont change that. For firmware you can try using the second link from google drive. do you meet the criteria Unlocked and on ATID ?
warriorvibhu said:
Yes thats too long. do you meet the criteria Unlocked and on ATID ?
Click to expand...
Click to collapse
Yes, mine is us unlocked and it's on ATID. Do you know how I could cancel it?
---------- Post added at 03:45 PM ---------- Previous post was at 03:43 PM ----------
jianansong said:
Yes, mine is us unlocked and it's on ATID. Do you know how I could cancel it?
Click to expand...
Click to collapse
At the command line, I clicked "control + C" and surprisingly the progress number starts moving again, and now I am at 53% and it's still going...