Dear all.
I'm Ramzi and I'm totally new in this type of technology so I urge you to help me.
I have Chinese unit dvd in my Hyundai Sonata 2013.
Brand : HITS car DVD, HYUNDAI SONATA LED10-11 / SUPER HIGH RESOLUTIONS 1024×600.
Modal: ANHY822 / 8913AG
Website: http://www.hicesan.com/?p=719
by mistake I flashed android MCU update to my unit white it's Wince, the dvd is still working but the screen is black.
full story
At beginning I tried to update it with last Android software for Middle East from HITS site,so I tried many time but it didn't read the Update from the SD card. So I thought that I should update the MCU first, so I flashed Android MCU update to my unit while it's Wince, so screen goes black and the dvd is still working with black screen. Because I wasn't aware that my unit is Wince not Android.
So now I urge you to help me, what should I do to get the screen back and if i can change from Wince to full android unit.
I'v Emailed HITS company, but unfortunately the r not helpful.
Please guide me with proper steps and software because there is no technical in Yemen for such unit.
Regards
Ramzi
Hello,
The same thing happened to me, i have a dsr-n 270 head unit.
i updated the MCU as the constructor's instruction but the screen stays black now.
When i power it on it writes android as if it will start normal then the screen becames white then black.
I detect the HU bluetooth and the buttons make sound when i press.
someonne can help us pls?
Sorry for my english....
No one to help us??
Sam9933 said:
No one to help us??
Click to expand...
Click to collapse
Have you tried contacting the manufacturer? Maybe they could point you in the right direction. My knowledge is limited, but I would look into something for reinstalling the MCU/Firmware from download/and or recovery mode. Sorry I couldn't be of any more help. But that is where I would start looking. Its not a pure Android unit, so it may be more difficult to do as from what I understand winCE units emulate the android OS from inside the winCE OS (not sure if this unit is only winCE or if it is both winCE/Android.)
Yes i tried to contact "pearl" the seller of this model, they asked me to sent it to them 35 euros diagnostic+shipping cost.
They are not willing to help because a lot of people got the same problem, they gived us an update that breacks the head unit.
yeah i looked for the recovery/donload mode buit found nothing.
THis brand are not helpful and they keep all information.
All people who want to buy an android head unit avoid Navgear...
Yeah, bud... I'm sorry you got the shaft. That really sucks man. I'm sorry I couldn't help you more.
I ordered this from the CarJoying website.
https://www.carjoying.com/2-din-car...-bluetooth-dab-wifi-mirror-link-obd2-nfc.html
It took less than 1 week to arrive and it also had postage tracking details.
I installed this into my 2016 Toyota Fortuner (Australian model). Below you can see a picture of what the original head unit looks like. It's about 8-9 inches and I didn't want to install it using the original facia because there would be a very big gaping hole around the headunit. You can find 2Din facias on EBay and Aerpro webiste
Original headunit
https://www.dropbox.com/s/uepiirm0jptgdf7/IMG_20160618_120009.jpg?dl=0
2Din Facia
https://aerpro.com/fp8190
I didn't want to cut up the original wiring harness on the car so I bought the following harness from the Car Joying website. 3 of the plugs were not required for my car and I had to re-wire SWC1 and SWC2 into the correct wires
https://www.carjoying.com/joying-ha...-radio-installation-wiring-harness-cable.html
I also used this 24pin plug for the reverse camera. The Toyota camera uses 5V (not 12v). I had to tap this into the reverse wire in the wiring harness I bought. Like I said earlier, I didn't want to touch the car harness.
http://www.ebay.com.au/itm/272022582406
Picture: https://www.dropbox.com/s/dgb2px1a6jvxnvd/s-l1600.jpg?dl=0
I had to modify the original mounting brackets to remove the locating bumps so that it would fit the new head unit. I don't have pictures of what I did, but you can see the original mounting brackets here: https://www.dropbox.com/s/i9neetzctpu2h7p/IMG_20160618_134150.jpg?dl=0
Here's the finished result
https://www.dropbox.com/s/l13o8quj12ogstj/IMG_20160818_170302.jpg?dl=0
Some items of note with this head unit.
1.) I initially had some issues with install apps from the Play store. Something error about "Cannot install to SDCard or internal memory". I used a paper clip to reset the unit and it seems to have fixed it.
2.) Wireless signal strength is weaker than my older 7" 2Din Android 4.4.4 headunit. My other car has one like this https://www.carjoying.com/2-din-car...th-and-gps-navigation-rotate-menu-hd-800.html and it seems to get faster download speeds and signal strength.
3.) The launcher cannot be changed. You're stuck with 2 options only
4.) The "factory settings password" is 3368 - None of the information documented here - http://forum.xda-developers.com/wiki/Hui_Fei_Type#Factory_Settings_.22Passwords.22 is relevant to this new unit
5.) I much prefer the old menu system. If you watch here https://youtu.be/W-Q3qz0dgd0?t=377 you'll notice a separate app is launched to get to the headunit specific settings. In my other headunit, all these settings are embedded into the normal Android Settings App. This application has a lot of toggles for settings that have lost their translation from Chinese to English. None of toggles are documented so you'll find yourself switching stuff on/off trying to figure out what's changed.
6.) No root Unit can be rooted using Kingoroot. I used an older version but it worked
7.) All things aside, it's actually a very good head unit. I've only had it in for 1 day but it's done everything it's supposed to do
Here are some pictures of the system information
https://www.dropbox.com/s/6crr4toix2r37vw/IMG_20160818_193719.jpg?dl=0
https://www.dropbox.com/s/263m039qdt0mzmh/IMG_20160818_190826.jpg?dl=0
First post updated. I have root
Hi,
my Radio arrived yesterday.....
I've rooted the unit and installed Xposed (Youtube in background, Youtube Adaway, ....)
Everything is working good.
Now I am looking to install a custom Rom on it (DSA Rom)....lets see -> there is a problem with the MCU....its not compatible with the "other" Roms here on XDA
I found this website to have some useful info that is related to this unit
http://4pda.ru/forum/index.php?showtopic=738689&st=180
I used Chrome to auto-translate from Russian to English. It's not perfect, but it's good enough.
The videos here are also somewhat relavant
http://www.witson.com/en/introduce001.html?newsTypeID=100022485&newsType=Video F9XXX Android 4.4
Not sure of the ROMs/MCUs here are relevant, not willing to try yet
https://mega.nz/#F!OlpkjYIR!jHVYotE0fh3FJZKmFX9d7g
Not the same unit as yours, but my Joying has worked like a champ
poyz said:
I ordered this from the CarJoying website.
Here are some pictures of the system information
Click to expand...
Click to collapse
It seems i have the same mcu as you, my radio is a 10.1" screen single din.
Have you got a link that you used to root the device?
Im new to android and its all a bit foreign to me.
Ive just started a thread as i couldn't find any info on my unit and then i found your thread.
Things id like to change about my device is
- get rid of mute in reverse
- get rid of the car picture in reverse
- be able to play an apps (foxtel go) that says it won't play on a rooted device (if possible)
- increase the amount the screen can dim or be able to turn the screen off
does rooting allow you to change any of the above?
thanks
---------- Post added at 11:28 AM ---------- Previous post was at 11:24 AM ----------
poyz said:
I found this website to have some useful info that is related to this unit
Click to expand...
Click to collapse
how do you change your first link to english?
FR0GGY said:
Things id like to change about my device is
- get rid of mute in reverse
- get rid of the car picture in reverse
Click to expand...
Click to collapse
get rid of mute in reverse should be easy. Go to Settings and there is an option in there somewhere, I think it is Car Settings. There are options to Mute on reverse, or lower the volume, or just leave it regular. At least that is how my Joying works.
Not sure what you mean by get rid of car picture?
CadillacMike said:
get rid of mute in reverse should be easy. Go to Settings and there is an option in there somewhere, I think it is Car Settings. There are options to Mute on reverse, or lower the volume, or just leave it regular. At least that is how my Joying works.
Not sure what you mean by get rid of car picture?
Click to expand...
Click to collapse
yeah that option is there but it doesn't change anything the mute still works.
unfortunately i can't post links until I'm above 10 posts, seems you can't upload pictures here without a link. But there is a diagram of a car when the reverse camera comes on, I've been able to get rid of the reversing guide lines but not the car picture.
FR0GGY said:
Have you got a link that you used to root the device?
Im new to android and its all a bit foreign to me.
Ive just started a thread as i couldn't find any info on my unit and then i found your thread.
Things id like to change about my device is
- get rid of mute in reverse
- get rid of the car picture in reverse
- be able to play an apps (foxtel go) that says it won't play on a rooted device (if possible)
- increase the amount the screen can dim or be able to turn the screen off
.
Click to expand...
Click to collapse
If you're new to Android, I suggest you don't root it until you're familiar.
To answer your questions
1.) I've not tried, I like the music muted when I put it in reverse
2.) There is a setting in the Car Media Settings App. I'll find it and update this post
3.) I can't help you there, I don't have Foxtel Go.
4.) There is a Sleep functions in Settings->Display that will allow you to turn the screen off after X minutes of inactivity.
poyz said:
If you're new to Android, I suggest you don't root it until you're familiar.
To answer your questions
1.) I've not tried, I like the music muted when I put it in reverse
2.) There is a setting in the Car Media Settings App. I'll find it and update this post
3.) I can't help you there, I don't have Foxtel Go.
4.) There is a Sleep functions in Settings->Display that will allow you to turn the screen off after X minutes of inactivity.
Click to expand...
Click to collapse
4) yeah I think the minimum is 3 minutes was hoping for something less.
To remove the car picture when you put it in reverse, launch the Car Media Settings app, press the 3rd button from the left on the bottom row of options. Enter 3368 as the password, set the setting "Car Radar" to off.
poyz said:
To remove the car picture when you put it in reverse, launch the Car Media Settings app, press the 3rd button from the left on the bottom row of options. Enter 3368 as the password, set the setting "Car Radar" to off.
Click to expand...
Click to collapse
Thank you, joying actually responded with that today.
Also managed to get the volume working in reverse. There was two settings "reverse mute" or something like that had to be turned off and then there was a mute in reverse setting that had to be set high not low - reverse to what I thought.
Any updates on this unit, recieved my JY-UN138 yesterday
what is it ? MCTB or KYL ?
Looks like the interface for the 4PDA forum is the same but i'm not sure it's the same hardware
D3LTA said:
what is it ? MCTB or KYL ?
Click to expand...
Click to collapse
Neither
According to the system info menu it's JY_60_C6R_7706_5006_CAN(A)_Newlap
See picture https://db.tt/VMWBmyEN
yeah i know that.
Hope there will be some support for them in future
if anyone got a update please post it here
Does that mean, it is currently not possible to update this unit to 5.1.1 with Malaysk ROM? Just thought about ordering this one, but if it is not possible to upgrade to 5.1.1 then probably I will wait...
Also on the Joying page this unit is listed as "PX3 1.8GHz Cortex A9", while most (all?) other units are listed as "RK3188 1.6GHz Cortex A9". Is there a performance difference between these SoCs? What is your boot time with this unit?
Actually the performance is excellent, but indeed it's not upgradable with Android 5.1 now because of total different hardware, unit will die if u try what I have been told.
Official restore
Hello,
had some issues with the unit and seller send me new firmware
Check this and this video for update instructions
Thanks for that. Do you mind taking a picture of the Android version screen of you unit now that you have a different firmware?
Hi,
did you update the unit?
How can I update it? Via recovery?
I have some problems to boot in recovery mode :/
Best regards
Hi all,
Great forum. I've been reading for weeks on here and hope I can help others as my knowledge expands.
I have recently purchased my first Android HU and installed it the other day. It is a MTCD PX5 (Xtrons PB96MTVPL).
Unfortunately, after playing around in the Factory Settings menu, I seem to have made my front panel buttons completely inoperable.
I have tried reflashing the MCU with the correct (GS) firmware and this has made no difference. Also, when I try to 'relearn' the keys in the Factory Settings menu, there is no detection.
Does anyone have any ideas on what I should try next?
Thanks!
Manufacturer pointed me in the direction of this instruction video: https://1drv.ms/u/s!AjrY0uqbW_kBg0jM-nKwiHTBRS7J
Easy when you know how!
Great.
I followed the steps of the video and managed to configure everything right.
Thank You
Hi, I have the same issue with my Xtrons panel keys, the link you shared will not open, do you have the link content in another format please?
I bought this unit for the family Zafira B. It fits in lovely and I have no issues with any of it. Well, almost. One thing I hate is the status bar, which on this thing isn't small. It's pretty much constantly there, including on every GPS app I've tried. As well as being annoying and taking up far too much space, it's going to eventually result in a pretty bad case of burn in.
So, in short, I want rid of it unless I swipe down to show it, in other words I want to run immersive mode at all times. However, Xtrons don't seem to happy about making this easy. I have tried every app that should allow it but it would appear the writing of secure settings is something they have either disabled or it's not there in the first place. I have tried to root with KingRoot to no avail, it fails on 70% every time. I'm not bothered about root that much, I was only trying because it's likely it would allow me to get rid of the status bar.
Any suggestions as to what I can do at this point would be appreciated.
Model info:-
Processor Type - QuadCore-R16
Android Version - 6.0.1
MCU Version - 5.3.19-36-81-E50201-170215
System version - V7.3.1_20170505.204845_MLT1-DVD
DVD Version - 2.13.15.860mc-150417
Hi
Sorry I don't know the answer to your question but I stumbled upon this topic when searching. I am looking to replace the HU on my Zafira B and the Xtrons HUs keep popping up as they are specifically made to be compatible with Vauxhalls and come with the CANbus box so steering wheel controls work etc. The only thing that is putting me off is that all listings on ebay and Amazon and on Xtrons website say not compatible with Zafira B with on board computer. I just wonder if this is actually the case. I know that you will lose the computer button whilst installing an aftermarket stereo and that setting the clock and date can be a problem afterwards but other than that, do you find it a problem? Do you lose things like fuel consumption and fuel info from the top display or is there a way to still display them using steering wheel buttons?
I'd be interested in your thoughts as the Xtrons units seem good value.
Many thanks
Does this help?
https://forum.xda-developers.com/pixel-xl/themes/how-to-enable-true-immersive-modes-t3554299
No root required. Description is for Pixel xl, but works on any android device
Hey all,
I’ve just completed an install of a PX6 Android 10 unit in my Peugeot 508. Overall I’m pretty happy with the unit. Feature rich, mostly appears to be working well.
I’ve got a minor problem that I’m dealing with regarding the button mapping. The unit I have has an MCU version “MTCE_MX_V3.60_1” and the directional arrows/seek buttons on my radio move the radio tuning/CD track the opposite direction!
I’ve contacted my seller and they have advised that because my car is right hand drive, the button mapping is backward. He has advised that this may be corrected in a future MCU update.
As I understand (I’m a complete novice at this so apologies for any dumb questions in advance) it is possible to flash with an alternative MCU version. Does anyone know of any MCU version which may work, and allow correct button mapping?