Hey community!
first of all: my android knowledge is very limited, but I try my best to formulate my problem!
So, my Huawei p8 lite freezes on the Huawei logo and doesn't let me enter safe mode or anything else than fastboot/recovery mode (if trying volume down and power it just starts on huawei logo and freezes again). I know, that there are some posts on the internet for that topic, however, they all require OEM unlocked. I am pretty sure, that I didn't unlock my OEM in the developer settings and my thesis, that its locked, is confirmed by the 'remote: Command not allowed!' message when I type nearly any fastboot oem command (e.g. fastboot oem getvar all) on my computer. So, my question: Is there any possibility to unlock OEM with my phone just being able to enter fastboot mode?
With OEM unlocked I then hope to be able to unlock my bootloader and recover my phone ... (but thats another topic )
possibly useful information:
- HiSuite is installed on my PC (win10)
- fastboot&adb is 'installed' on my PC
- I can see my phone in 'fastboot devices', but I can't see it in 'adb devices' (it also doesn't appear in device manager if that should be the case ...)
- my bootloader is locked (I can howsoever see that with fastboot oem get-bootinfo)
Looking forward to your answers and thanks a lot in advance!
Related
Hey guys! Is there any way to unlock Redmi Pro's bootloader without waiting for permission from Xiaomi? Have anybody found a way to bypass it?
easy, first make sure you have spflash tool and a working fastboot rom (just in case of trouble)
Next make sure your computer has working fastboot and adb.
Enable USB debugging on the device.
Enable OEM unlock in the Developer options settings on the device.
Connect the device to the computer through USB.
From a terminal on a computer, type the following to boot the device into fastboot mode:
adb reboot bootloader
Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine.
From the same terminal, type the following command to unlock the bootloader:
fastboot oem unlock
Device is wiped & unlocked & no OS
Now flash twrp, reboot into it and copy xiaomi.eu rom on card & install
Good luck
hello i haven't on my xiaomi redmi pro eom unlock in the devlopper mode help me pls
criszz said:
easy, first make sure you have spflash tool and a working fastboot rom (just in case of trouble)
Next make sure your computer has working fastboot and adb.
Enable USB debugging on the device.
Enable OEM unlock in the Developer options settings on the device.
Connect the device to the computer through USB.
From a terminal on a computer, type the following to boot the device into fastboot mode:
adb reboot bootloader
Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine.
From the same terminal, type the following command to unlock the bootloader:
fastboot oem unlock
Device is wiped & unlocked & no OS
Now flash twrp, reboot into it and copy xiaomi.eu rom on card & install
Good luck
Click to expand...
Click to collapse
press in settings about phone 7 time on miui version
after that you will find developer options in aditional settings
criszz said:
press in settings about phone 7 time on miui version
after that you will find developer options in aditional settings
Click to expand...
Click to collapse
Sadly there is no oem unlock option in developer options. I'm on MIUI 8.1.2.0 Stable (MHQCNDI)
EDIT: i just switched to Developer ROM and still nothing.
sorry, my mistake i use another laguage, activate usb debuging , conect to the pc and run adb , if some permision asked alow
I can't unlock it using fastboot oem unlock since it's mediatek device =/ When I try I get
(bootloader) Start unlock flow
FAILED (remote:
Unlock failed - Err:0xffffffff
)
finished. total time: 0.016s"
Click to expand...
Click to collapse
i unlocked that way, maybe you do something wrong
try another way without unlocking try flash twrp with spflash tool
Do you remember what miui version did you have when you unlocked this way? Maybe I can roll back to it and then try again. Were you using developer or stable rom?
i was on fake/vendor rom this i thinlk http://blog.geekbuying.com/index.ph...ndroid-6-0-smartphone-firmware-212302-161109/
Crissz, your bootloader was allready unlocked when you received your phone. You cannot do a simple oem unlock via fastboot with a xiaomi phone. It's a fact..
@KarKlim please try fastboot oem unlock-go comand too
This method does not work as many say
(bootloader) Start unlock flow
FAILED (remote:
Unlock failed - Err:0xffffffff
)
finished. total time: 0.006s
C:\Program Files (x86)\Minimal ADB and Fastboot>
Redmi Pro with Latest stable china rom
Is it possible? Xiaomi regoke my unclock previleges and now i have my Redmi Pro stuck in China Developer Rom. No way to install multilanguase Xiaomi.eu... can someone help please?
Maybe try with a new xiaomi account with different sim card.
And then from a different internet ip, from your friend or something.
I have no idea how they collect data or what. I'm just guessing here.
wow great news for Xiaomi lovers:
wow great news for Xiaomi lovers:
GeekBuying offering 73% off ( Xiaomi Redmi Pro 3GB + 64GB) 184.65 EURO
spam, all post of this user is spam
So, I bought my Redmi Pro today and i want to install xiaomi.eu ROM. Do I have to unlock bootloader first? Or can I do it with unlock bootloader?
No OEM in my xiaomi redmi pro
[[/B]
criszz said:
easy, first make sure you have spflash tool and a working fastboot rom (just in case of trouble)
Next make sure your computer has working fastboot and adb.
Enable USB debugging on the device.
Enable OEM unlock in the Developer options settings on the device.
Connect the device to the computer through USB.
From a terminal on a computer, type the following to boot the device into fastboot mode:
adb reboot bootloader
Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine.
From the same terminal, type the following command to unlock the bootloader:
fastboot oem unlock
Device is wiped & unlocked & no OS
Now flash twrp, reboot into it and copy xiaomi.eu rom on card & install
Good luck
Click to expand...
Click to collapse
Can you help me please because I don't have a OEM unlock option in redmi pro and how to unlock bootloader... please man
criszz said:
easy, first make sure you have spflash tool and a working fastboot rom (just in case of trouble)
Next make sure your computer has working fastboot and adb.
Enable USB debugging on the device.
Enable OEM unlock in the Developer options settings on the device.
Connect the device to the computer through USB.
From a terminal on a computer, type the following to boot the device into fastboot mode:
adb reboot bootloader
Once the device is in fastboot mode, verify your PC sees the device by typing fastboot devices
If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine.
From the same terminal, type the following command to unlock the bootloader:
fastboot oem unlock
Device is wiped & unlocked & no OS
Now flash twrp, reboot into it and copy xiaomi.eu rom on card & install
Good luck
Click to expand...
Click to collapse
Not worked for redmi note 8 pro ......failed.....
Hi.
I´ve unlocked the bootloader on my P10 plus.
But now, the toggle to unlock OEM on the developer settings is greyed and I can´t perform any fastboot commands.
Any help?
Thanks
I believe the option becomes disabled when you've unlocked the bootloader, as you'd have to use the relock command instead of the toggle to relock it.
I assume you're familiar with accessing and using fastboot if you've unlocked your bootloader... so for the fastboot commands, does the device show up when plugged in and you run "fastboot devices"?
singularoctopi said:
I believe the option becomes disabled when you've unlocked the bootloader, as you'd have to use the relock command instead of the toggle to relock it.
I assume you're familiar with accessing and using fastboot if you've unlocked your bootloader... so for the fastboot commands, does the device show up when plugged in and you run "fastboot devices"?
Click to expand...
Click to collapse
me to
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
the same is happening to me
Eyezcripz said:
me to
i try to relock my oem using this command fastboot oem relock (16 unlock code)
after that my p10 plus is restart then i show only are
HUAWEI ERECOVEY
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
but i type fastboot devices its connected i show my product code? i dont know what thats code
then i try install twrp always failed
i dont know what happen . i cannot open my p10 plus now always in
“HUAWEI ERECOVEY”
Click to expand...
Click to collapse
i have my huawei p10 plus doing the same thing of yours.....only erecovery mode and when i get to boot in fastboot mode is only fatboot mode & rescue and i had locked bootloader and frp lock.....but i was reading that huawei just block the page to unlock bootloader i just dont know why they did that /......
Maybe try re-unlocking and flashing stock rom, kernel, system, and boot. (Or you can try the method I used to update manually). Requires to be able to acces external sd card.
Hmu if you want to know how.
i am on pie 073 firmware... i want to unlock my bootloader ... all the drivers are installed even my phone is detected both in adb and fastboot mode... but when i run the unlock both normally or running uts as administrator it doesnt work... nor the application of unlockimg boot loader works on my phone
Did you try manually typing the unlock command?
Code:
fastboot oem unlock
I've tried this , but it says
Comman failed
No error...
I also has the same problem
KVCmoto said:
Did you try manually typing the unlock command?
Code:
fastboot oem unlock
Click to expand...
Click to collapse
You need to download the Asus Unlock Tool.
If you still have issues, go to their forum ZenTalk and they can help you. They are very fast.
Hi everyone,
Today I tried unlocking the bootloader on my Lenovo Z6 Pro to root my phone but I've hit a dead end.
I've enabled OEM unlocking and USB debugging on the developer options before using "adb reboot bootloader". I managed to get to bootloader mode alright, but neither "fastboot flashing unlock" nor "fastboot oem unlock-go" works; I always get "remote: flashing unlock is not allowed" or "remote: oem unlock is not allowed".
This makes it seem like I didn't enable OEM unlocking before, but I made sure it was enabled. Any ideas how I might solve this?
Hi,
First you have to get the sn.img file for unlocking your bootloader from the zui website. Reboot to bootloader, first flash the img file and then enter the command for unlocking. As far as I have tried, you have to use this image file every time you need to unlock the bootloader(if you have locked it)
Good luck
Sayi Keshkar said:
Hi,
First you have to get the sn.img file for unlocking your bootloader from the zui website. Reboot to bootloader, first flash the img file and then enter the command for unlocking. As far as I have tried, you have to use this image file every time you need to unlock the bootloader(if you have locked it)
Good luck
Click to expand...
Click to collapse
Thanks for the reply. I gave up rooting my device for a while but I got tired of my phone bugging all the time so decided to give it another shot. This time I have another problem and it's driving me crazy: ADB wouldn't detect my phone when it's connected so I still can't unlock my bootloader. I tried installing every driver I could find but nothing works, but I can transfer files through explorer just fine. It occured to me that the USB might be the problem but it's the exact same one I used the last time I tried rooting it and I didn't have this problem back then.
hi, I'm trying to root my p9 lite to use it to run a 3d printing server ( https://github.com/d4rk50ul1/klipper-on-android )
I tried some rooting apps but it was unsuccesful.
after researching I used potatoNV to change the bootloader code
and SKR Tools to unlock bootloader and install twrp but i couldn't acces twrp via the phone. i locked back the bootloader with skr tools and now i can't get back to android, the phone is stuck on the " your device has been unlocked and can't be trusted. your device is booting now... " page, i left it like this for the nignt and it's not booting. I can't turn it off, My pc is not seeing it when pluged and I unpluged the battery for ten minutes but it's doing the same after replugging it .
what can i do to repair, root and use it ?
KilianBLRD said:
i locked back the bootloader with skr tools and now i can't get back to android,
Click to expand...
Click to collapse
you can relock bootloader only on clean stock firmware. If you did this on a modded system (TWRP installed etc.) you probably bricked the phone.
-Alf- said:
you can relock bootloader only on clean stock firmware. If you did this on a modded system (TWRP installed etc.) you probably bricked the phone.
Click to expand...
Click to collapse
what does this mean and what can i do ?
KilianBLRD said:
what does this mean and what can i do ?
Click to expand...
Click to collapse
A. Try your luck with testpoint & board software (check unfamiliar terminology by google or xda.
The instructions do not perform, if you do not know what you're doing.)
B. Use "DC-Phoenix" (paid service) .
-Alf- said:
A. Try your luck with testpoint & board software (check unfamiliar terminology by google or xda.
The instructions do not perform, if you do not know what you're doing.)
B. Use "DC-Phoenix" (paid service) .
Click to expand...
Click to collapse
I'm new to that, can you eplain a bit more please ?
Try to connect phone to PC in fastboot mode, run commands:
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
-Alf- said:
Try to connect phone to PC in fastboot mode, run commands:
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
Click to expand...
Click to collapse
my pc is not seeing the phone
Maybe it's brick when you try to relock but it's still bootloader unlocked Don't worry
You can fix it with 4 method
1. Flashing with board firmware
2.fastboot flashing method
3.sd card upgrade method
4.usb upgrade method
KilianBLRD said:
my pc is not seeing the phone
Click to expand...
Click to collapse
i know but try the following:
press and hold the Power + Vol Down buttons for at least 10 sec and when the screen turns off, connect the USB cable to the phone.
-Alf- said:
i know but try the following:
press and hold the Power + Vol Down buttons for at least 10 sec and when the screen turns off, connect the USB cable to the phone.
Click to expand...
Click to collapse
What should I do next ?
KilianBLRD said:
What should I do next ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/need-help-to-root.4571641/post-88366105
-Alf- said:
https://forum.xda-developers.com/t/need-help-to-root.4571641/post-88366105
Click to expand...
Click to collapse
But fastboot mode is not working
KilianBLRD said:
But fastboot mode is not working
Click to expand...
Click to collapse
Do I really have to repeat everything twice???
https://forum.xda-developers.com/t/need-help-to-root.4571641/post-88366083
Good luck!
-Alf- said:
Try to connect phone to PC in fastboot mode, run commands:
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
Click to expand...
Click to collapse
it says waiting for device and nothing happen
KilianBLRD said:
it says waiting for device and nothing happen
Click to expand...
Click to collapse
to check that the connection to the computer in fastboot mode is established normally, type the command
fastboot devices
,the serial number of the phone should be displayed.
If not, you're not in fastboot mode.