Sadly I was messing with the Magisk Modules and Installed Viper4Android, after a while I unistalled it and right afterwards my phone became soft bricked, I can´t use the recovey and my only option is the fastboot; I´ve already tried installing a new rom but it wasn´t usefull if somebody can help me I´ll be very happy.
i kept rebooting in to fast boot also after doing the viper stuff so i held down vol up and power while in fastboot till it forced it to reboot to twrp.
then just reflashed mu rom in twrp.
cmlucht said:
i kept rebooting in to fast boot also after doing the viper stuff so i held down vol up and power while in fastboot till it forced it to reboot to twrp.
then just reflashed mu rom in twrp.
Click to expand...
Click to collapse
If/when you have bootloop because of a Magisk module, just boot to TWRP and in Terminal go to /data/adb/modules and delete the suspect module (the last you messed up with) or all modules
Nevertheless, Viper4Android works fine (follow OP post #1 - guide for stock Q):
https://forum.xda-developers.com/k20-pro/themes/guide-viperfx-miui-11-android-10-t3994621
Related
Hi,
maybe anyone can help me getting out of the bootloop(LG G6 H870)? reason, why I'm stuck in bootloop: I installed magisk v13.0 (beta) and magisk manager 5.0.3 after unlocking my bootloader to gain root access. A new version came out and I decided to installed it because it switched magisk 13 from beta to stable. I opened magisk manager, updated the manager, downloaded magisk v13.2 and flashed it through recovery (twrp). But i wasn't able to get root access (rebooted a few times, but no difference). So my next plan was to uninstall magisk using the magisk-uninstaller.zip and flashed it using twrp. After this step, my phone rebooted over and over again. The only thing i can do is to get into the factory data reset screen. While booting , i connected my phone to my laptop, but obviously its not recognized so I can't execute any adb commands.
Any suggestions how to access recovery mode or how i can leave the bootloop?
Thanks
edit:
I managed to solve my issue in following way:
1. booted into download mode like Killua96 suggested while connected to my computer
2. opened lgup on and flashed the factory image
3. rebooted into bootloader and flashed twrp image
4. copied my backup (which i made with twrp) into the BACKUP folder
5. restored my backup with twrp
6. after reboot I wasn't able to unlock my phone, because my correct unlock pattern wasn't accepted
7. booted again into twrp, navigated into /data/system and deleted locksettings.db-wall, locksettings.db-shm and locksettings.db
8. rebooted one more time and everything was fine again!
iLikeContainers said:
Hi,
maybe anyone can help me getting out of the bootloop(LG G6 H870)? reason, why I'm stuck in bootloop: I installed magisk v13.0 (beta) and magisk manager 5.0.3 after unlocking my bootloader to gain root access. A new version came out and I decided to installed it because it switched magisk 13 from beta to stable. I opened magisk manager, updated the manager, downloaded magisk v13.2 and flashed it through recovery (twrp). But i wasn't able to get root access (rebooted a few times, but no difference). So my next plan was to uninstall magisk using the magisk-uninstaller.zip and flashed it using twrp. After this step, my phone rebooted over and over again. The only thing i can do is to get into the factory data reset screen. While booting , i connected my phone to my laptop, but obviously its not recognized so I can't execute any adb commands.
Any suggestions how to access recovery mode or how i can leave the bootloop?
Thanks
Click to expand...
Click to collapse
Try to connect it to the pc while bootlooping, then turn it off by keeping pressed power and vol- when the display turns off quickly keep pressed vol+ and it should boot in download mode... Good luck
Killua96 said:
Try to connect it to the pc while bootlooping, then turn it off by keeping pressed power and vol- when the display turns off quickly keep pressed vol+ and it should boot in download mode... Good luck
Click to expand...
Click to collapse
Ok, I'm able to access the download mode now. I only have access to a laptop running Linux right now, when I'm back home, I try to flash the stock ROM using the official LG Tools! Thanks for your help!
Alright so, I've managed to uppercut down to 13a from 1ca, unlock the bootloader, install twrp. Never installed supersu, but when the phone booted to twrp I installed the magisk zip with no errors. After booting the magisk manager never showed up as installed. Installed it manually, ran it, said magisk was not installed and device fails safetynet and pts. Downloaded the latest stable magisk, booted into twrp and tried flashing it AGAIN. This time I get an error that it can't flash it. I'm totally lost here. This is all I lack to have systemless root here. Also I can't seem to boot into recovery via button presses. I keep getting the pink triangle and despite holding vol+ and power, the device just boots normally. I have to force recovery via adb on pc.
Any ideas?
Bueller?
nemisans13 said:
Bueller?
Click to expand...
Click to collapse
It's his day off
Sent from my LG-H910 using XDA Labs
I kinda ran into a issue with magisk not installing properly and how I got around it was to get your roms boot image file and make a zip of it. Then, go to twrp and flash the boot image, then flash magisk.
nemisans13 said:
Alright so, I've managed to uppercut down to 13a from 1ca, unlock the bootloader, install twrp. Never installed supersu, but when the phone booted to twrp I installed the magisk zip with no errors. After booting the magisk manager never showed up as installed. Installed it manually, ran it, said magisk was not installed and device fails safetynet and pts. Downloaded the latest stable magisk, booted into twrp and tried flashing it AGAIN. This time I get an error that it can't flash it. I'm totally lost here. This is all I lack to have systemless root here. Also I can't seem to boot into recovery via button presses. I keep getting the pink triangle and despite holding vol+ and power, the device just boots normally. I have to force recovery via adb on pc.
Any ideas?
Click to expand...
Click to collapse
You installed the magisk zip and the magisk manager apk? Did you try flashing the rom and installing masik and the apk again?
For some reason on the lg phones it won't boot directly to twrp. when you boot to recovery and it ask if you want to reset, select yes. If you have twrp installed, it will then boot into recovery.
I have not since my bootloader is unlocked I heard u can't go back to stock on the vs995
nemisans13 said:
I have not since my bootloader is unlocked I heard u can't go back to stock on the vs995
Click to expand...
Click to collapse
Nothing i suggested requires stock.
With the phone off
press and hold volume down
press the power button and hold until you see the lg logo
while holding the volume down, release only the power button and press it again and hold
if you did it correctly, you should be in recovery
it will ask if you are sure if you want to reset your phone a few times
select yes, and yes
If you have twrp installed it should boot up in twrp
Or
If you already have the bootloader unlocked, make sure that developer options are enabled
go and enable adb debugging
connect usb cable
use adb to boot into fastboot
use fastboot to boot into twrp
From twrp you can flash the rom zip, magisk zip, and then install the apk after the phone rom boots up
which rom are you using? which magisk zip? which magiskmanager.apk?
So i wanted to finally install custom ROM on my LG G6 H870, needed twrp... obv, followed all the instructions:
adb devices - showed my device all was good
2nd: adb reboot bootloader
3rd: fastboot flash recovery twrp.img
4th: fastboot reboot + holding volume down and power button, on logo released power button and pressed it down again, finally got to factory data reset 2 YES options and saw the Teamwin bootup logo, but then phone just booted up normally...
5th: Tried to open recovery once more, but then it did regular Data erease.
What could be wrong?
Razexay said:
So i wanted to finally install custom ROM on my LG G6 H870, needed twrp... obv, followed all the instructions:
adb devices - showed my device all was good
2nd: adb reboot bootloader
3rd: fastboot flash recovery twrp.img
4th: fastboot reboot + holding volume down and power button, on logo released power button and pressed it down again, finally got to factory data reset 2 YES options and saw the Teamwin bootup logo, but then phone just booted up normally...
5th: Tried to open recovery once more, but then it did regular Data erease.
What could be wrong?
Click to expand...
Click to collapse
Which TWRP did you flash ? Bootloader unlocked ?
Razexay said:
So i wanted to finally install custom ROM on my LG G6 H870, needed twrp... obv, followed all the instructions:
adb devices - showed my device all was good
2nd: adb reboot bootloader
3rd: fastboot flash recovery twrp.img
4th: fastboot reboot + holding volume down and power button, on logo released power button and pressed it down again, finally got to factory data reset 2 YES options and saw the Teamwin bootup logo, but then phone just booted up normally...
5th: Tried to open recovery once more, but then it did regular Data erease.
What could be wrong?
Click to expand...
Click to collapse
I had exactly same problem when I did this = only Teamwin bootup logo and then boot into android (I hope your bootloader is unlocked first).
Solution was you have to use TWRP 3.1.1-0 and u get into recovery. I tried more versions of TWRP (3.2.1-0 , 3.2.2-0 , 3.2.3-0) but ONLY 3.1.1-0 works and I dont know why.
Anyway I got another issue after because I didn't want to install root yet (first I wanted to backup).
An issue was I got into restarting loop by installing no-verity-opt-encrypt 6.0 which should be a solution for boot into android without losing TWRP (considering to one walkthrough I found).
I was lost for a while but I found a solution = install another boot.img (in my case I installed one dm-verity or dm-verity & forceencrypt zip file - btw what is a difference between them?).
Oh wow.. Well thanks, ill try your solution as soon as i get time. Bootloader is unlocked indeed, used latest twrp. I'll try 3.1.1-0.
@ Razexay
that happened to me also with Official TWRP take that from Eliminater74 that's where backup and encryption work with dm-verity & forceencrypt look here in the forum everything is well described
https://forum.xda-developers.com/lg-g6/development/twrp-t3828254
Hi,
OxygenOS 9.0.11 rooted with Magisk 18.0, no mods, stock recovery
I got a notification for Magisk 18.1 and installed it with Magisk manager
Now my device stucked at: press power key to pause boot
Can push any key, nothing helps to boot
Any help is appriciated
Thanks
old_man
Was able to go to Fast Boot mode, press power key,
message: press power key to pause boot, after some seconds, the screen goes black
What to do?
old_man
Fastboot flash TWRP, once in TWRP flash the TWRP installer, reboot TWRP and flash Magisk zip file.
Download files in advance and you should be able to get back.
Thanks,
will try and report back
old_man
lol this will happen to more than one person since happened to me too.
unfortunately i'm on stock recovery and at work, so tried to wipe data and cache on recovery but didn't work.
since i already did a full wipe i will just use the tool to get back to stock lol, oh well, thats easier right now since i have all the files on my computer.
So I just rooted and got everything to work just fine (.33). Thought i'd smash in Viper4Android aswell.
The phone is now stuck on the logo with the red and two white dots.
I can get it to reboot with Vol+ and power, but the power-button does not let me go into recovery mode at all. It's like its disconnected.
Is there anything you can do to get into recovery/fastboot from here?
Also tried every single vol+powercombination with 0 results..
Thanks in advance.
What viper4android version did you install? And what Android version are you on?
If using Magisk 21> you should be able to hold down power button to boot into safe mode.
Hold power button and volume down and up at the same time, this should boot you into bootloader.
If you're on Android 10:
Boot into TWRP and remove module folder from data/adb/modules
Android 11 (or 10)
[Recovery][Stock OOS]Oxygen OS Stock recovery with ADB enabled
While waiting for a working TWRP for all those needful of the possibility to access their file system from recovery, e.g. for removing an offensive magisk extension preventing boot I repackaged the Stock OOS recovery but with ADB enabled...
forum.xda-developers.com
Lossyx said:
What viper4android version did you install? And what Android version are you on?
If using Magisk 21> you should be able to hold down power button to boot into safe mode.
Hold power button and volume down and up at the same time, this should boot you into bootloader.
Click to expand...
Click to collapse
Thanks for the reply.
I seem to have solved it (for now..).
I could not get any key to answer to my commands when i rebooted the phone (hence why i couldnt get into recovery etc.), it only went back to the loop after displaying the usual message about the bootloader being unlocked.
Holding down both volume-buttons and using the msm-tool i managed to get it back to OEM (with everything locked. Again. Lmao) so now i just gotta watch out when I install Viper again (if i do..).
Running Oxygen 11.0.3.3.IN11BA with the latest Magisk (I just patched it today)
Edit: I just used the Viper4Android that i found inside Magisk if that makes any sense.
I'll try your links and see if i have to re-flash again..
Cheers