Related
Hi, my brother-in-law tried to root his phone but probably didn't know what he was doing with Odin and Kies. I tried to restore the phone with Kies3 but the phone is not recognized and I can't get a recovery code. I've tried the default option of booting into recovery mode and flashing with Odin as Administrator. I'm flashing following a guide on this forum using [Auto Reboot] [F. Reset Time] checked in the options and loading [AP] [CP] [CSC] first. Others have commented not to use the [BL] file. The problem is when I try to flash it fails and I get this message:
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
On the screen of the phone it says:
UDC START
SYS REV CHECK FAIL : Refer 3 > Binary 1
SECURE CHECK FAIL : system
Click to expand...
Click to collapse
I've tried everything I could flashing each one by one [BL] [AP] [CP] and [CSC]. Apparently the only one that successfully flashed through was [CP]. The phone can boot into recovery mode fine, when I start the phone normally it just hangs on the Samsung Galaxy S5 screen. Any help in the right direction would be appreciated. I have pretty much GoogledFu'd all the information I can and am using the stock Samsung Galaxy S5 SM-G900A firmware. I have tried different USB ports, the stock Samsung USB cable, and an LG USB cable and that didn't help either.
To flash the firmware using Odin you need to put the phone in Download mode (Power + home + volume down) and not recovery mode. Select PDA/AP in Odin, select the firmware and then click start.
DigitalBeating said:
Hi, my brother-in-law tried to root his phone but probably didn't know what he was doing with Odin and Kies. I tried to restore the phone with Kies3 but the phone is not recognized and I can't get a recovery code. I've tried the default option of booting into recovery mode and flashing with Odin as Administrator. I'm flashing following a guide on this forum using [Auto Reboot] [F. Reset Time] checked in the options and loading [AP] [CP] [CSC] first. Others have commented not to use the [BL] file. The problem is when I try to flash it fails and I get this message:
On the screen of the phone it says:
I've tried everything I could flashing each one by one [BL] [AP] [CP] and [CSC]. Apparently the only one that successfully flashed through was [CP]. The phone can boot into recovery mode fine, when I start the phone normally it just hangs on the Samsung Galaxy S5 screen. Any help in the right direction would be appreciated. I have pretty much GoogledFu'd all the information I can and am using the stock Samsung Galaxy S5 SM-G900A firmware. I have tried different USB ports, the stock Samsung USB cable, and an LG USB cable and that didn't help either.
Click to expand...
Click to collapse
Yes, I already have done that and the only thing that writes successfully is the [CP] file. It fails to write to the NAND and does a FAIL! (Auth). Not sure what else I can do.
Alright I think I figured exactly what he did to the phone. Apparently AT&T locked the bootloader on Lollipop and his phone got upgraded to Lollipop while he was sleeping. So he tried to use Odin to flash the AP for the older KitKat back onto the S5 and this softbricked the phone. As far as I have read there is no way to downgrade back currently to KitKat to get root access. I'm trying to look for stock firmware for Lollipop but I can't find anything for this model. I assume if I flash it back to the latest Lollipop version functionality will be restored. Someone said something about flashing a kernel but I don't know. Not really sure what to do now since I can't find official Samsung S5 SM-G900A firmware to flash back either through the recovery or through Odin.
DigitalBeating said:
Alright I think I figured exactly what he did to the phone. Apparently AT&T locked the bootloader on Lollipop and his phone got upgraded to Lollipop while he was sleeping. So he tried to use Odin to flash the AP for the older KitKat back onto the S5 and this softbricked the phone. As far as I have read there is no way to downgrade back currently to KitKat to get root access. I'm trying to look for stock firmware for Lollipop but I can't find anything for this model. I assume if I flash it back to the latest Lollipop version functionality will be restored. Someone said something about flashing a kernel but I don't know. Not really sure what to do now since I can't find official Samsung S5 SM-G900A firmware to flash back either through the recovery or through Odin.
Click to expand...
Click to collapse
I am currently in the same boat. Please tell me you found a fix for this and if so, what was it? Any help is greatly appreciated.
@DigitalBeating and @Theamazingcorey
Here is an AT&T lollipop firmware.....
https://www.androidfilehost.com/?fid=24591000424940454
G900AUCU4COI5_ATT4COI5_v5.1.1_Repair_Firmware
I found it (by chance) on a Russian hosting site. They say it's a 'repair' firmware which means it is more than likely going to be more than one file (it'll probably be bootloader, modem and OS) So you'll have to load each file into it's respective Odin 'slot'.
If I understand how repair firmwares work, it should wipe and format the data partitions (instead of simply overwriting them) as it flashes. This will give the best chance of a successful flash.....
http://i.imgur.com/rVnFwJM.jpg
I cannot thank you enough, that seems to have fixed my problem. I though I was going to be stuck with a paperweight, lol.
Would you happen to know if there is a way to root the the AT&T S5 with 5.1.1?
Glad it worked fella.....
With regards to rooting, everything I've read on XDA indicates AT&T Lollipop can't be rooted....and the possibility of downgrading to achieve root is non existent.......
But there's a LOT if information on XDA, and I'll be the first to admit that I haven't read it all........
http://i.imgur.com/rVnFwJM.jpg
@Theamazingcorey just out of interest, can you confirm what files were inside the zip?
http://i.imgur.com/rVnFwJM.jpg
Thanks for the info. Sorry I was not able to get back to you sooner, I've been slammed these last couple of days. Have family coming into town this evening and between work and getting ready for their visit, I haven't had time to think straight, lol.
Model: SM-S902L I think?
Current ROM: Official and only ROM provided on Kitkat 4.4.2 Currently with residue files from being Rooted
Custom Recovery: TWRP
I have been battling with this phone for WEEKS. This is the first phone I rooted, but for the life of me I can't undo it. I had installed xposed at some point but I can't really remember why. I'm trying to flash the original stock rom on here to completely remove root access as everything else has failed me, but I can't even do that! I did the 'full unroot" option that was in SuperUser, and that's gone, all of the other root access apps have been removed, however I'd like to get the stock ROM, and recovery back on here.....
I have tried to load it via fastboot, but can't find a fastboot compatible driver for this phone and Windows 10 64bit, those I have tried windows states is incompatible with it.
I have tried using different types of ODIN to install the flash rom, (that I downloaded from sammobile.com) and every time they fail with:
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone it says:
SW REV CHECK FAIL:[aboot]Fused 3 < Binary 2
and the download stops.
I'm at my wits end here. I have tried so many different ways to get this to work, including doing a factory reset before the flash, removing the sd card, uninstalling and reinstalling the phones usb drivers, leaving "Auto Reboot" checked, then trying unchecked, Tried with Odin3 v1.85, Odin3.9 (I believe... about 3 weeks ago), and Odin3_v3.10.6. I can't find anything online about this model, aside from the zipped file of the original stock rom from samsung.
I have tried Kies, but it refuses to take the S/N for the phone, when I checked on the back of it, the S/N isn't listed, just an IMEI number (which I tried with no luck). Looking on the phone for the S/N just displays 00000000000, as well as when using a S/N finding application. Same issue with Smart Switch, can't verify S/N.
On top of that, the phone can't seem to decide what model it is. There is a sticker on the back casing that says SM-G900P(B), then on the one behind the battery it has an FCCID ends with G900V, but the model # just above that says SM-S902L that is displayed in the device settings. I've found that all of these can be used to determine the type of ROM that can be flashed, however mine are all different...
I have also tried installing it via TWRP from the sd card, it fails as well...
please someone more knowledgeable in this help me put this factory rom on my phone...
Hey everyone,
This guide should make it very easy for anyone to root and install a custom recovery (TWRP) on basically almost any S6 variant. You've got all the download links in the video description as well.
It works on all Android 7.0 stock versions, including the latest ones (with the most recent security patches).
Everything is very clearly explained, with step-by-step instructions in the video below. Just make sure you download the correct TWRP tar file for your S6 variant.
https://youtu.be/BV1ELmu8T0I
Enjoy!
Here is just the same but in really short (because that isn't so complicated) And here are also useful links to get latest drivers, stock firmware, ROOT, TWRP etc.
rifek4 said:
http://cdn.droidviews.com/wp-content/uploads/2015/03/Odin3_v3.12.7.zip Odin 3.12.7 (latest)
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 SamFirm 0.3.6 (latest)
http://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download Samsung USB Drivers 1.5.63 (latest)
Install latest USB drivers, unpack lastest Odin3 and SamFirm. Use SamFirm to download latest firmware for your model, so put "SM-G920F" in "model" check "Auto" under that, put CSC code for your country in "Region", download it and then just flash it in Odin
Here you got full CSC codes list and also short guide how to use SamFirm
https://www.androidsage.com/2017/07...specific-product-code-csc-and-country-region/
How to root then? > CF-Auto-Root
How to get TWRP then? > latest TWRP
Customize? > Look my signature
Click to expand...
Click to collapse
rifek4 said:
Here is just the same but in really short (because that isn't so complicated) And here are also useful links to get latest drivers, stock firmware, ROOT, TWRP etc.
Click to expand...
Click to collapse
Thank you so much for responding, but unfortunately l it does not have my version which is the (SM-S906L/TFN) variant it works but straight talk but when I booted it up it said Tracfone so the region I put TFN and the model number (SM-S906L) and I can't find it. I have the firmware for my phone so as this is much not a problem. What is a problem is when I do flash the stock firmware in odin is that i run into sboot.fail and cm.bin fail, and the only way is to delete them from the .tar file and rezipping them into another .tar without the sboot/cm.bin, and NO matter what I flash either if is a successful rom flash in twrp or what I just said in odin I ALWAYS come back to a boot loop. I'm starting to think my phone is dead idk what to do.
Error: <ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Halp
I hate to ask, but i've been going over every post i can find in the forums, including this one, and i think i am scared to ask this but.......Does this not work for the G920V Verizon variant? i keep looking everywhere online but it seems like none of these methods work for that Variant, but no one has said that it wont work on that one specifically, was hoping maybe you can confirm or deny if it works on the Verizon variant? thank you in advance.
KNOX
How about KNOX? Will it flip the flag?
rifek4 said:
Use search option or Google is your friend.
Click to expand...
Click to collapse
Looks like you're the one who can't read. He clearly stated that he read everything he could find and all he got was conflicting information. If you don't have the answer, don't post anything. If you have the answer and can set the record straight, then please do. Thanks.
rifek4 said:
I answered on same question for few times before, and I won't do it any more because I don't like to repeating my self. Answer on he's question is in thousends places on that forum, if he only would to like use "Search Option" here little bit above on right corner, and type there "ROOT S6 Verizon" or just "ROOT G920V" he will have answer for him question even confirmed not once! My first shoot in search engine, that thread : https://forum.xda-developers.com/ga...-auto-root-t3056630/post73993971#post73993971
For example here on few last pages is many posts with answer to him.
P.S.
Please don't let me starting next time.
Click to expand...
Click to collapse
Is this what you call an answer?
---------------------------
Quote:
Originally Posted by NizzoFoShizzo
I thought SM-G925V verizon model doesn't allow this method because it doesn't have the oem unlocking option in the developer options.
Just flash CF-Auto-Root for your model (is avaiable), then you can easy flash also TWRP without problems with OEM Unlocking. After that do all what you want
---------------------------
Because I'm quite sure you're wrong. Just because there's a CF-Auto-Root image for the device for a particular build number, it doesn't mean it's gonna get past the locked bootloader. I got CF-Auto-Root from here https://desktop.firmware.mobi/device:841/firmware:2970 for my G920V 6.0.1 build CPK2. Tried to flash with Odin, and it failed right away. On the device, on the downloading screen, it says "Secure Download : Enabled", and once I try to flash, it says "SECURE CHECK FAIL: (RECOVERY)".
Also, the CF-Auto-Root README.txt clearly says: "Your device must have: - An unlocked bootloader, - OEM unlock enabled (if present) in developer options, - Factory reset protection (if present) disabled".
I was going to write a long post about all the things I tried on the Verizon phone that din't work, including mihaixp and rifek4's suggestions (things that worked fine on G920F), so I'll just say: "No, there is no root for Verizon phones", and leave you with this: https://forum.xda-developers.com/verizon-galaxy-s6/help/current-root-method-verizon-s6-t3647371
rifek4 said:
Here is just the same but in really short (because that isn't so complicated) And here are also useful links to get latest drivers, stock firmware, ROOT, TWRP etc.
Click to expand...
Click to collapse
Plz Guyz Help!
I just installed twrp in my SM-G925l & directly boot into recovery , after that i did factory reset, advanced wipe(dalvik/ART cache, system, data, internal storage, cache) and than i was going copy the Rom Files via MTP but it says "can't copy files, the Device either disconnected or stopped responding" .
I don't have a external usb drive so can't try that.
Plz guyz, help. What to do now.
rifek4 said:
Yes... So true... For G920V with 6.0/7.0 I think isn't any avaiable way to ROOT. I never had Verizon and never looking for any post with informations about it, but from that what I know possible was S6 Verizon (G920V) ROOT but on Lollipop (5.1.1) ROM's only.
Click to expand...
Click to collapse
and yet here you just answered the simple question i asked in the first post you replied to, so thank you , but even though you say this, other posts seem to make me believe it is possible.
But just in case, here is what i have tried so far, maybe some other option i am not seeing in my searching has come up that you might know?
First i was trying to root via the method mentioned here....http://rootmygalaxy.net/root-samsung-galaxy-devices-using-cf-auto-root-odin-tool/
This method kept failing me however on the first box, not the green pass as is expected. I also in my searching found this thread about locked bootloaders... (crap my window crashed with the link and now i can't seem to find it, grr) anyways, there was talk of unlocking the bootloader to solve the problem....which lead me to this thread...https://forum.xda-developers.com/verizon-galaxy-s6/general/root-nougat-s6-verizon-t3710864
And i used that method, and everything went and worked as expected however i did not achieve the SuperSU that i expected to see int he app drawer in the end, so something didn;t work.
which lead me to this thread...https://forum.xda-developers.com/ve...20vvrs4dqd1-odin-nougat-7-0-firmware-t3597007 to get myself the firmware needed for this method here...https://forum.xda-developers.com/ga...-auto-root-t3056630/post73993971#post73993971 and this post ...https://androidmtk.com/root-samsung-galaxy-s6-sm-g920v which was again just the CF Auto Root that failed the first time around.
So i feel like a giant game of round robin here.
I really don't want to drop to a lower version of Android to root the unit (and i also feel it really wouldn't matter what version at this point) but if that is my only option i might just try it, but so i kindly ask again, after clearly using the search function on the forum to look for methods, has anyone had luck with the Verizon variant S6 920V on Nougat getting root to stick and if so, can you please point me to the method you used on the forums, because all the methods i keep finding circle back to the CF Auto method that keeps failing time and time again. Thank you in advance.
So will this be triggering KNOX or not?
Could anyone please tell me whether Knox will be triggered or not
Hello, I tried this method, everything was OK, i got pass in ODIN app, then tried to reboot and now nothing is happening, i think device is bricked, but I made everything as you have described in video. Now when I try to hold volume UP + home + lock buttons, galaxy s6 logo pops up, the side buttons just flash and nothing happens. Could you please, help me?
Edit: I can enter download mode
Edit2: false alarm, I just installed wrong TWRP
Hi guys, I have an j5 2017 (j530f/DS), and I rooted him, but, when I tried to unroot it, and get to default rom, it gets into a boot loop with the Samsung Galaxy J5 screen, and in the left corner is says "Recovery is not seandroid enforcing"
Did i birck it forever? Can i do something about it?...
Please help me guys... Thanks...
EDIT: I can't get into the Recovery mode, or Download Mode neither
I can't take the battery out, because is unibody tho...
Vol+ & Vol- & Power should force your phone to reboot properly.
Then with Vol- & Home & Power you should be able to enter the download mode.
gooodly said:
Vol+ & Vol- & Power should force your phone to reboot properly.
Then with Vol- & Home & Power you should be able to enter the download mode.
Click to expand...
Click to collapse
Ok, I i tried to install the software again, but i get this an error has occurred while updating the device software use the emergency recovery function in the smart switch PC Software , I didn't found my phone, and can't add by the S/N and phone name. I got into Download mode, and i am trying to install the default firmware, but it stucks at <ID:0/003> meta-data/fota.zip ...
Any solve for this?
Which FW and client program did you use?
There's Samsung Smart Switch which allows to update to the latest firmware or Odin which requires that you download the firmware manually, e.g. from Sammobile. Downgrading to an old version may fail. I could downgrade from Lineage OS (8.x) back to stock ROM (7.1) but I could not downgrade to stock ROM 7.0. Anyhow here flashing failed immediately.
In Odin I selected all 4 files (AP, BL, CP and CSC) and had no issues. Up to now I never heard of a problem with fota.zip, so I have no clue about this issue.
gooodly said:
Which FW and client program did you use?
There's Samsung Smart Switch which allows to update to the latest firmware or Odin which requires that you download the firmware manually, e.g. from Sammobile. Downgrading to an old version may fail. I could downgrade from Lineage OS (8.x) back to stock ROM (7.1) but I could not downgrade to stock ROM 7.0. Anyhow here flashing failed immediately.
In Odin I selected all 4 files (AP, BL, CP and CSC) and had no issues. Up to now I never heard of a problem with fota.zip, so I have no clue about this issue.
Click to expand...
Click to collapse
I got my device to the J530FXXU1AQF5 firmware
I need to update it to J530FXXU2ARA2. *who is the actual stock rom* can i do it whithout getting any problem?
Go into DL mode and flash it (ARA2 = Security Patch Level 2018-01-01) . J530FXXU2ARB3 (Security Patch Level 2018-02-01) is more recent.
As long as you can enter the DL mode flashing will work unless you encounter an hardware error.
gooodly said:
Go into DL mode and flash it (ARA2 = Security Patch Level 2018-01-01) . J530FXXU2ARB3 (Security Patch Level 2018-02-01) is more recent.
As long as you can enter the DL mode flashing will work unless you encounter an hardware error.
Click to expand...
Click to collapse
I tried to install the most recent version but i got an error, and i downloaded this one
EDIT:
<ID:0/004> Odin engine v(ID:3.1205)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What I did wrong?
Bobita said:
What I did wrong?
Click to expand...
Click to collapse
What did you do exactly? From the log file it's obvious that you used Odin.
Did you select AP, BL, CP and CSC in Odin?
Or did you use CSC_Home?
Hey bro download latest twrp available for ur device it should be latest and updated if odin is able to detect ur phone just install the twrp first then u should download the stock firmware u wanna install and boot it from recovery u dont need any odin if u can able to get into recovery u can just install ur stock rom by placing it in ur external storage if ur recovery options work .try this
Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it
What error do you get on the phones download mode screen?
Sent from my SM-G935FD using Tapatalk
TOmwbb said:
Hi Everyone
Samsung S7 Edge
Hope someone can help me.
I try flash the stock firmware on odin, but then it says there no pit partition, I download the pit file then when i try to flash it again it says pit file partition failed or something, i try different firmwares from sammobile.
When i installed smart switch it ask for recovery code,
Product Name is SM-G935F
Current Binary is Samsung Official
System Status is Custom
FAP LOCK on
Is there anyone that can help me please i would appreciate it
Click to expand...
Click to collapse
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.
Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
SteveMurphy said:
You may have to flash back to the original ROM your device came with, then work your way back up to whichever version you want.
This has worked for me a few times. An example would be I was on N, so had to flash "down" to Marshmallow since nothing N and up (Oreo, Pie) would flash. And the FRP lock will be removed using this method.
If you can get into download mode you can always recover your device, it may take several attempts.
Click to expand...
Click to collapse
TOmwbb said:
Thanks SteveMurphy,
I will try that but i dont know what rom it was the orginal one, I dont get any error message on my download screen only message i got was in odin was re-partition and then cant not find pit
when add the pit it says set pit file
:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
I just download latest firmware now, and when i just put in the csc
I get this
ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 301 M
<ID:0/004> SetupConnection..
<ID:0/004> Removed!!
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 2057)
<OSM> All threads completed. (succeed 0 / failed 1)
I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had, go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.
SteveMurphy said:
I would advise you download a ROM older than what you currently have and try that. I had this same issue, with the fail notification, and was able to fix not just that but also the FRP lock by flashing an old ROM (in my case it was a stock Marshmallow ROM from Sammobile).
So put all the files inside the zip (BL, AP, CSC) into their respective slots in Odin and flash it.
If you don't remember what you had go to Sammobile and download/flash the oldest ROM they have. Latest firmwares will not work while you have FRP lock on.
Click to expand...
Click to collapse
Will try just now.
My windows 10 installed the driver as SAMSUNG MOBILE USB CDC COMPOSITVE DEVICE is that correct
Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you
TOmwbb said:
Hi Steve do you maybe perhaps or link how installed TWRP, i still dont come right, Maybe if i installed TWRP in download mode
Thank you
Click to expand...
Click to collapse
Just put the twrp file in AP slot of odin and flash.
Sent from my SM-G935FD using Tapatalk
Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work
TOmwbb said:
Reason why i asked i took my phone into service center and they say on the samsung software they use the machine gives SIMRA error i dont know what that is, can it be couse the phone was rooted.
So hope if i use TWRP and go from there should work
Click to expand...
Click to collapse
No idea what Simra error is. Twrp should work just fine.
Sent from my SM-G935FD using Tapatalk
Yeah thanks everyone for being so kind to me and trying to help me i think the error they say is fimbriae or something they saying they cant load the firmware on. So i think that could be reason maybe the phone is rooted and they cant even load the software
CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it
Is it possible anyone have a Pit file for SM-G935F South africa vodafone
TOmwbb said:
CAn anyone maybe link me the correct TWRP for samsung s7 edge. I see there so many but dont wanna download incorrect one.
Would appreciate it
Click to expand...
Click to collapse
https://eu.dl.twrp.me/hero2lte/twrp-3.3.0-1-hero2lte.img.tar.html
Flash via odin.
Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working
TOmwbb said:
Hi Karachi,
I tried TWRP the thing is only thing that stoppig me is odin keep saying set pit partition ive downloaded so many SM-G935F Pit files none of them are working
Click to expand...
Click to collapse
My name is Mustafa not Karachi[emoji23]
I live in karachi.
As for your problem, your binary in locked since odin detected an unauthorized download. I'll let you know one I find a solution.
Sent from my SM-G935FD using Tapatalk
Sorry about that thanks would appreciate it very much thank thanks
Anyone can maybe link me I need to download - G935FXXU2ERG2 XFV South Africa vodafone sammobile free download is currently off would appreacite it
HI Mustafa, I downloaded the stock rom Nougar, i tried flash it my phone says SW REV CHECK FAIL(BOOTLOADER) DEVICE 4 BINARY 2