Hi there, when I tried to change the partition size (bad idea) in twrp I bricked the device. Now I only get a black screen no matter what I trie.
When I connect it to a windows pc the led lights up (red) for a second and windows seems so recognize a connection at the usb port, but it doesn´t show up in the device manager, nor the miflash tool / mi assistant.
You can reboot to recovery?
Related
Hello,i am trying to connect my ideos x5 to my pc (Win7/32bit) but i get 2 problems:
1)Windows cant install Huawei HSUSB Device. I follow this guide http://forum.xda-developers.com/showpost.php?p=13306262&postcount=14 but still cant with message "Windows could not install the device"
2)When i put my phone at purple screen (power on + vol + , vol-) and connect with pc , cant install qualcomm cmda technologies msm.Again i follow this guide http://forum.xda-developers.com/showthread.php?t=408105 but Windows Mobile Device Center 6.1 dont find my phone.
If you find a solution plss help me
Very strange, I've got Win7/32 as well, but didn't need the drivers to connect the phone in mass storage mode.
Can you please explain what exactly you're trying to achieve?
Are you trying to use HiSuite or just connect the phone to view it's contents?
The first option you've mentioned is for ADB interface and that only works if you've selected "USB debugging" ON.
Also, if you're trying to access the SD card contents from the PC, don't forget to activate (mount) the SD card from the phone.
The second one is not for Windows 7, is for Windows Mobile I think. I have to admit, the first time I've connected my phone in bootloader (pink screen) it failed to install that driver, but it never stopped me from exploring the Image folder contents in any way.
Cuz i dont know much from this things,The 1st one appear when i had debugging mode enabled , when it is disabled all are fine , so we are fine without debugging mode as i think and 2) The 1st time i connect my phone (purple screen) ( i wanted to install cwm recovery) image dont appear , i tried one more time now and it appeared so am fine from this too .Thnx anyway
I have a Yu Yureka Plus. I flashed the lollipop stock rom, not knowing that it vricked many other yurekas. The update which many other users got and bricked their yu yureka plus.
Now my phone won't boot up, won't go into recovery, won't even go into fastboot/bootloader mode. When i connect it to a charger or pc only then the red light glows near headset speaker.
I came to know that my yureka plus is hard bricked. When i connect it to my pc, my system does not picks up anything. It wont detect it.
I came accross these posts on the web where you have to write an sd card with yureka's original images and put that sd card inside the device. Then you have to go inside the phone, and on the motherboard you have to short pins 2 and 6, while the device is plugged into usb cable and to the computer, and simultaneously pressing the volume up and power button on the device to boot it into fastboot. When i did that the screen went up with some vertical strips and lines as expected. Accordingly that was fastboot mode on a dead yureka. The posts said that now your pc should detect your yureka in this fastboot mode and then you can basucally do whatever you can through fastboot to fix the device.
My problem is that i after i shorted pins 2 and 6 and getting the device into fastboot mode, my pc still wont detect my yureka plus.
Help me out here please...
This time I shorted pins 2 and 4. My pc detected it with Unknown USB Device (Device descriptor request failed)
i had a friend's yureka with bootloop on YU logo,i flashed it using adb fastboot,the phone started vibrating and dint even turned on,only goes to fastboot mode after long pressing volume up and shows red light on connection.I also tried emmc image burning on sd card method but still in same condition.Please help
kunal26das said:
This time I shorted pins 2 and 4. My pc detected it with Unknown USB Device (Device descriptor request failed)
Click to expand...
Click to collapse
Are you using the correct drivers for Qualcomm devices ?
i accidentally use the format all+download option in sp tools and flashed the bootloader. now whenever i try to do anything it gives me this error. pls help
-NAND Flash was not detected
-phone will not boot
-no charging led when plugged in
-phone is detected when i plug into pc (connecting and disconnecting device continiously)
[my redmi note 3g is dead but it takes flash files from flash tools but wont turn on. no charging light and blank screen..when i connect to pc with data cable pc make sound of connecting and disconnecting device continiously. pleas help me. i flash many times but such type of problem occur this time only ]
when I plug in the phone, it keeps disconnecting and reconnecting, alternating between MediaTek USB Port driver and MediaTek Preloader USB VCOM driver. While flashing, it stays constant on MediaTek Preloader USB VCOM
i tried many ROM but same condition nothing response, SP flash tool always show big green tick 100% after flash, always succeed flashing but still black screen no light.
Hope someone can reply with a solution. thanks.
HI,
i have the same issue as well
if you able to add 1 more step there will be an error message pop up i guess.
SP-flash-tool > options > download > "check" checksum
my error : BROM ERROR : S_CHKSUM_ERROR (1041)
i have tried most of the step given by Google.
still no hope.
i guess i damage / completely erase eMMC
You should change eMMC chip. This is a hardware problem, don't waste your time trying to flash it. NAND chip in read-only mode.
no OS, no recovery, edl not working...
hey
i'm new here
so hello everyone
i write this post because i have no idea what can i do else....
i try every method i found on xda (without dissamble) and my axon 7 still have no os...
long story short
some time ago i flash lineage 14.1 using Axon7_EDL_Tool
everything was ok
but one day lineage updater tell me there is update to lineage os 15,1
but you have to use twrp
so i download update
put it to sd card
reboot to twrp
Wipe system,data and cache
everything like i read instruction
then i flash lineage 15.1 in twrp
but it stop - saying error 7
i did not uprade TWRP - maybe it is a problem....
now i have no os, no twrp
and axon stop on "your device will boot in 5 second"
bootloader unlocked
usb debbuging on
i have win10 64b, win7 32b, win7 64b
I installed drivers for axon 7,
i bought deep flash cable
nothing helps.....
what happens if you connect the charger to your phone while its off? not to pc, to wall charger
also, does the LED flashes once and then turns off while trying to access EDL? or does it stays on all the time? or maybe never lights up at all?
Always, if you update ROM to higher Android version, then you have to check TWRP version. 1st attempt - try to install TWRP.
I think error 7 means that you didn't flash the Oreo bootstack. If you can get into bootloader/fastboot mode then you can follow this to flash TWRP. Or give this a try, I haven't tried it myself though.
you need los15 bootstack lol.Go to los15 thread,download universal bootstack v2,flash in twrp,then flash rom (oreo rom)
Keep pressing power , volume + and volume - and this will force into EDL.
Then flash universal orea bootloader then recovery. Then u should be good to go
I can't flash anything...windows can't see my AXON7 - this is main problem...
I tried the tools you wrote but they can't connect my phone
I don't know what else can I do to communicate between phone and computer
Change the cable.
O tried 4 USB and 2 deep flash...
Pressing power , volume + and volume - will turn the led notification red right?
Then you connect the phone to the PC.
You have to check the device manager, what you see there?
Can you get into FTM?
Vol down and power button.
Try installing Zadig drivers and see if that helps
In the device manager in windows you need to see
Qualcomm HS-USB QDLoader 9008
If all drivers are setup correctly
Try installing twrp via fastboot.
Hope this helps
Nothhhing appears im device manager...
Still nothing..
what happened when you press both volume button and button together? for Oreo it will just show black screen or it will show FTM mode on the screen if you on older bootloader. Keep pressing the 3 button until it show black screen then plug in to your computer... make sure you windows firewall and security is all turn off.
Can you check on Windows' Device Manager if the Axon 7 is recognised as DFU, after you try to enter EDL mode? (Also, usually, the notification light is red and stays on).
Similar situation
Hi,
I'm in a similar situation. I'm guessing my recovery was corrupted. I even disassembled the unit to try to get it into EDL mode, which may be working but the device is just not recognized by my computer, though it does charge. My next step is to try replacing the usb connector, or just move on.
Good luck!
Ed
Hello,
I was in the same situation and this tuto saved my phone
https://forum.xda-developers.com/axon-7/how-to/guide-axon-7-universal-unbrick-t3814413
Hope this works for you !
Whenever I go to fastboot the computer recognizes the phone but as soon as I open Mi Unlock Tool or MiFlash Tool, the device disconnects and a message appears on the corner of the screen saying to press the volume buttons to turn off the device, nor the Mi Unlock nor MiFlash detects the device, could anyone help me?
I tried to install the qualcomm usb drives, tried different versions of Mi Unlock/PC Suite and nothing works
Hexvessel1992 said:
Whenever I go to fastboot the computer recognizes the phone but as soon as I open Mi Unlock Tool or MiFlash Tool, the device disconnects and a message appears on the corner of the screen saying to press the volume buttons to turn off the device, nor the Mi Unlock nor MiFlash detects the device, could anyone help me?
I tried to install the qualcomm usb drives, tried different versions of Mi Unlock/PC Suite and nothing works
Click to expand...
Click to collapse
I have the same issue. Driver installed with miflash_unlock. When i start the Fastboot the driver isnt found.
Have you tried opening Mi Flash as admin on Windows?
worked with me buying a USB hub, I don't know if it's a problem with the motherboard usb drivers, but with the hub the mi flash and unlock tool
detect the device now, you can buy one of these cheap hub with 4 usb ports