Database Users

[ROM][UB][5.0][AOSP] Android 5.0 Lolliipop

MOD EDIT
Thread closed as this is someone else's work.
See post 4 for the original work
Android 5.0 (L) for Sony Xperia Z (YUGA)
Amost pure AOSP with Kernel 3.4.104
This is the home of the Android 5.0 Port to the Sony Xperia Z (YUGA / C6603).
Current progress
Feature Status Comment
Audio Working -
Graphics Working -
3D Acceleration Working -
OMX Working -
Camera Working -
External SD-Card Working -
Disk Encryption Working -
USB OTG Working Storage and DACs work fine
Wifi Working -
rild (radio/GSM) Working -
Bluetooth Working -
Tethering Wifi & BT tested, USB reported to be OK. -
SE Linux Working In 'Enforcing' mode (as required by 5.0)
NFC Working without HCE support
MTP Working -
GPS Working no AGPS
Installation instructions
First time installation
A full wipe is required to upgrade to Android 5.0. (I also strongly recommend a full wipe if you installed any other Android 5.0 ROM)
Step 1
Download and extract the ZIP file
Step 2
Flash all 3 files to your phone via fastboot
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot reboot
NOTE: THIS WILL WIPE YOUR PHONE - INCLUDING YOUR INTERNAL SD-CARD! A full backup is therefore recommended.
Upgrading from a previous 5.x build
A full wipe is NOT required while upgrading from an old 5.x build, so userdata.img must NOT be flashed during the upgrade process:
Step 1
Download and extract the ZIP file
Step 2
Flash only boot.img and system.img to your phone via fastboot
fastboot flash boot boot.img
fastboot flash system system.img
fastboot reboot
Google Apps installation
After booting your phone for the first time, download the gapps package and push it to /sdcard using adb (or MTP):
adb push gapps_50_yuga_004-00cb.tgz /sdcard/
adb reboot
Your phone will now reboot and automatically install gapps during the boot process. (note that your phone will reboot twice - this is normal).
I strongly recommend to keep the gapps package in /sdcard/ after the installation finished: Upgrading to a new release will erase your existing gapps installation - but if the package is still present in /sdcard/, it will be automatically installed during the first boot.
MOD EDIT @gregbradley
Sharing the work of others without their permission is not allowed
Press Thanks If You Installed it and Enjoy it !!
XDA:DevDB Information
Lollipop, ROM for the Sony Xperia Z
Contributors
xx_Niresh_xx
ROM OS Version: 5.0.x Lollipop
Based On: AOSP
Version Information
Status: Testing
Created 2014-11-29
Last Updated 2014-11-29

RESERVED
RESERVED

RESERVED
Reserved

as i see it is the version of AOSP from @pabx why do you open a tread when it is here http://www.blinkenlights.ch/ccms/android/yuga-l.html it is his work, This is my question.

sekac55 said:
as i see it is the version of AOSP from @pabx why do you open a tread when it is here http://www.blinkenlights.ch/ccms/android/yuga-l.html it is his work, This is my question.
Click to expand...
Click to collapse
Yeah sure,This is his work... I Opened coz many useres in My Xperia Z group on facebook searched the thread on XDA therefore i opened that everyone can find it easier, Dont forget to Donate to the Dev if you like the work !! Cheers to everyone

I ask you to delete this thread. Right now.
(You even copied the installation instructions - do you have no shame?!)

pabx said:
I ask you to delete this thread. Right now.
(You even copied the installation instructions - do you have no shame?!)
Click to expand...
Click to collapse
Sure I will do it Right now....why should I have i just wanted to help others ?

Uhm.. You list yourself as a contributor! Hotlinking to my files can hardly be considered a contribution.

Thread moved and closed
This is not development if you did not develop it
And you cannot share it without the permission of the original developer, which you do not have

[ROM][8.1.0][OFFICIAL] LineageOS 15.1 for Wileyfox Storm

[ROM][8.1.0][OFFICIAL] LineageOS 15.1 for Wileyfox Storm
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on kipper
Official Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (choose the variant you want)
Changelog:
Changes for kipper
Bug reports:
How to submit a bug report
LineageOS JIRA
Donate to support development:
Donate via PayPal to jrior001
Donate via PayPal to LineageOS
XDA:DevDB Information
LineageOS, ROM for the Wileyfox Storm
Contributors
jrior001, jrior001, mikeioannina
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2018-05-20
Last Updated 2018-09-10

Reserved
Updated recovery required
http://www.theflamingskull.com/downloads/kipper/TWRP-kipper-3.2.3.img
Test Build #1
* permissive selinux for debugging purposes
Test build #2 5/30/18
camera/flashlight and UI lag resolved

the last build works well
lineage-15.1-20180902-UNOFFICIAL-kipper

i cant instal instagram app

nightly 2018-09-10
1. I installed Instagram , but it doesn't play video
2. please fix the widgets
3. when I use dark theme ( dark mod theme)
the icons of "turn on/off" in "privacy guard" don't change the color

Can't install gapps (tried pico (stuck on logo) and stock (error 70 in TWRP)).
OK, let's go w/o gapps. Can't install .apk files.

Monate said:
Can't install gapps (tried pico (stuck on logo) and stock (error 70 in TWRP)).
OK, let's go w/o gapps. Can't install .apk files.
Click to expand...
Click to collapse
From opengapps, pico and nano should fit. I'm not sure what error 70 is but if you grab the entire recovery log from a failed flash I'll be glad to look it over.
With device in recovery, after your failed flash hook up to PC, and run "adb pull /tmp/recovery.log"
Sent from my PH-1 using Tapatalk

jrior001 said:
From opengapps, pico and nano should fit. I'm not sure what error 70 is but if you grab the entire recovery log from a failed flash I'll be glad to look it over.
With device in recovery, after your failed flash hook up to PC, and run "adb pull /tmp/recovery.log"
Click to expand...
Click to collapse
Both gapps were taken from opengappsorg.
Pls, help me with 1 more thing: I want to format /data from ext4 to f2fs but I got an error. Log contains both errors.
Aaaand... I didn't find how to attach a file ;(
UPD: https://drive.google.com/open?id=1ecgkLr7jRasryLgmKvPTaxsqdNcfHGPC

Monate said:
Both gapps were taken from opengappsorg.
Pls, help me with 1 more thing: I want to format /data from ext4 to f2fs but I got an error. Log contains both errors.
Aaaand... I didn't find how to attach a file ;(
UPD: https://drive.google.com/open?id=1ecgkLr7jRasryLgmKvPTaxsqdNcfHGPC
Click to expand...
Click to collapse
The only gapps attempt in that log was opengapps "STOCK" version which has everything. That won't fit, stick with PICO or NANO, I believe both of those will fit on 15.1, anything else you want you can get from Play Store.
Also I updated the link in post #2 to a newer TWRP version. I was able to convert /cache to f2fs just fine with that one.

Whatsapp video player is not working.

iN4sser said:
Whatsapp video player is not working.
Click to expand...
Click to collapse
Whatsapp and Instagram videos are both wonky. I'm aware. The only fix I have found breaks more than it fixes so for now we're stuck like this.
Sent from my PH-1 using Tapatalk

Hey. After the appearance of this error, I decided to try again to install LOS 15.1 (installed on f2fs, so the gapps did not fit). I downloaded Apkpure.apk through a standard browser, found it through a standard file manager, clicked, but nothing happened. Rebooting the device did not help. I tried to find in the settings the item "installation from unknown sources" (somehow it is called so), but it is not there. What to do?) The same problem was before on ext4.
build lineage-15.1-20181106-nightly-kipper-signed
UPD found solution: open file from internal storage

When the official image for kipper moved from LineageOS 14 to LineageOS 15, I destroyed my telephone by not noticing that the new OS wouldn't fit in the partitions and rebooting. I then wiped the phone, restored an older LO 13 (cm-13.1.2-ZNH2KAS3NA-kipper-signed-fastboot-1eb4b5e94b.zip) via fastboot flash and was back in business.
Since TWRP won't recognize SD card and/or USB memory device, I used adb sideload to install LineageOS 15 (lineage-15.1-20181230-nightly-kipper-signed.zip). The TWRP output ends with "script succeeded: result was [1.0000]", the adb process on the (Linux) desktop counts up to 47 % and then terminates with exit code 0 and without an error message.
The installed image boots, shows the usual LineageOS boot screen (the circles moving on a line from right to left) for a few minutes, and then reboots into recovery.
How do I find out what's going wrong here? How do I fix this behavior?
Is there any way to obtain a Lineage OS 14 image to try? The official download media seem only to have the latest six snapshots, which are all LineageOS 15 images.
Greetings
Marc

everything works well
everything works well on my phone
instagram doesn't have problem anymore ( since last month)

[IIIII] CROSS - Custom ROM Scripted Setup

Nexus 7'13 CROSS - Custom ROM Scripted Setup (c)2020-2021 k23m
CROSS works on PC with Windows, or WinPE if you do not have Windows installed, or VirtualBox with a Windows guest.
Currently supported ROMs:
- Android 10 LineageOS 17.1
- Android 11 LineageOS 18.1
- Android 11 LineageOS 18.1-flox
Previously supported ROMs:
- Android 7 LineageOS 14.1
- Android 7 LineageOS 14.1-microG
- Android 10 LineageOS 17.1-flox
FEATURES
- automatic scan of developer's website for the latest ROM version
- automatic download of all required components
- automatic single-click installation
- optional components like root or special kernel
- all you have to do is select yes/no during the installation
- both flo and deb are supported
PREREQUISITES
- unlocked device
- installed N7 USB drivers
- original eMMC partition layout may be required
All of the above are ensured with RESTOCK - also a scripted tool, available here:
[+]RESTOCK - stock restore, repartition, repair and reset, including USB driver fix
RESTOCK is a new Nexus 7 2013 repair and factory reset tool for Windows. The NRT app (Nexus Root Toolkit) is similar but is old, closed-source, unsupported, abandoned, does no eMMC diagnostics and most importantly - it offers no repartitioning...
forum.xda-developers.com
---------------------
lineage-install-2.bat
---------------------
This script installs and/or offers the following optional components:
- Android 10 LineageOS 17.1 UNOFFICIAL maintained by ripee https://forum.xda-developers.com/nexus-7-2013/development/rom-lineageos-17-1-t4038425
- TWRP (optional, no need to reflash it if exists already)
- repartition: sysrepart-max.zip by k23m (optional, no need if already repartitioned)
- root: Magisk (optional)
- GApps: pico (optional)
---------------------
lineage-install-3.bat
---------------------
This script installs and/or offers the following optional components:
- Android 11 LineageOS 18.1 UNOFFICIAL maintained by followmsi https://forum.xda-developers.com/t/rom-flo-deb-unofficial-lineageos-18-1-2021-04-07.3569067/
- TWRP (optional, no need to reflash it if exists already)
- repartition: sysrepart-ultimate.zip by k23m (optional, no need if already repartitioned)
- root: Magisk (optional)
- GApps: pico (optional)
NOTE: automatic scan of the developer's website is not possible.
Please download the ROM from: https://drive.google.com/drive/fold...HZThGTnM?resourcekey=0-0BunAmDBWluYPghT0Fs6CA
Save it in CROSS' folder and drag-and-drop it on lineage-install-3.bat to start the installation.
--------------------------
lineage-install-3-flox.bat
--------------------------
This script installs and/or offers the following optional components:
- Android 11 LineageOS 18.1-flox OFFICIAL maintained by npjohnson https://forum.xda-developers.com/t/...s-7-2013-wi-fi-repartition-only-flox.4255325/
- TWRP-flox (optional, no need to reflash it if exists already)
- repartition: sysrepart-ultimate.zip (flox compatible) by k23m (optional, no need if already flox-repartitioned)
- root: Magisk (optional)
- GApps: pico unofficial by ipdev (optional)
------------------------
getlog.bat and relog.bat
------------------------
If you see errors, copy and report them. Run getlog.bat and include "getlog.log" in your post. If possible, also run relog.bat and attach "relog-xxxxxx.zip" to your post.
----------
fstrim.bat
----------
Improve performance of your eMMC.
---------------
repartition.bat
---------------
If sysrepart repartition is impossible due to TWRP or GPT issues, run the repartition.bat script.
SUPPORT
[FIX][EMMC] Nexus 7 2013 ⊕ bricked, dead, frozen or stuck ⊕
Quick Links if fastboot mode is not available, try Unbricking Guide if fastboot mode is available, do RESTOCK In this thread I would like to consolidate information about eMMC flash memory failures and remedies. When flash memory fails it...
forum.xda-developers.com
[+]RESTOCK - stock restore, repartition, repair and reset, including USB driver fix
RESTOCK is a new Nexus 7 2013 repair and factory reset tool for Windows. The NRT app (Nexus Root Toolkit) is similar but is old, closed-source, unsupported, abandoned, does no eMMC diagnostics and most importantly - it offers no repartitioning...
forum.xda-developers.com
If you select the local file option, CROSS will scan the data folder and offer the newest found file for installation. If nothing is found, you can type/paste a specific file name to install. You can drop anything you like to the data folder - CROSS is now a basic universal ROM installer.
SAMPLE OUTPUT
Code:
Nexus 7'13 LineageOS 17.1 Install v1.3 @2020 k23m
SUPPORT - http://bit.ly/2C35sLZ
This script assumes that USB drivers are already installed.
If not, then run RESTOCK first or install them manually.
Enter device name (flo=WiFi; deb=LTE) - [flo/deb]: flo
Use local ROM file? (no if unsure) [y/n]:
--2020-05-15 06:17:53-- https://lineageos.wickenberg.nu/flo/
Resolving lineageos.wickenberg.nu... 88.129.42.110
Connecting to lineageos.wickenberg.nu|88.129.42.110|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: 'tmp1'
tmp1 [ <=> ] 6.32K --.-KB/s in 0.001s
2020-05-15 06:17:57 (5.33 MB/s) - 'tmp1' saved [6473]
Found for download: lineage-17.1-20200515-UNOFFICIAL-flo.zip
Use local TWRP file? (no if unsure) [y/n]:
Press any key to continue . . .
Downloading installation files.
--2020-05-15 06:19:02-- https://dl.twrp.me/flo/twrp-3.3.1-0-flo.img
Resolving dl.twrp.me... 45.249.91.154
Connecting to dl.twrp.me|45.249.91.154|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 9271296 (8.8M) [application/octet-stream]
Saving to: 'twrp-3.3.1-0-flo.img'
twrp-3.3.1-0-flo.img 100%[=================================================>] 8.84M 945KB/s in 11s
2020-05-15 06:19:15 (788 KB/s) - 'twrp-3.3.1-0-flo.img' saved [9271296/9271296]
--2020-05-15 06:19:15-- https://lineageos.wickenberg.nu/flo/lineage-17.1-20200515-UNOFFICIAL-flo.zip
Resolving lineageos.wickenberg.nu... 88.129.42.110
Connecting to lineageos.wickenberg.nu|88.129.42.110|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 413523888 (394M) [application/zip]
Saving to: 'lineage-17.1-20200515-UNOFFICIAL-flo.zip'
lineage-17.1-20200515-UNOFFIC 100%[=================================================>] 394.37M 2.71MB/s in 3m 17s
2020-05-15 06:22:34 (2.01 MB/s) - 'lineage-17.1-20200515-UNOFFICIAL-flo.zip' saved [413523888/413523888]
--2020-05-15 06:22:34-- https://jaist.dl.sourceforge.net/project/opengapps/arm/20200515/open_gapps-arm-10.0-pico-202005
15.zip
Resolving jaist.dl.sourceforge.net... 150.65.7.130
Connecting to jaist.dl.sourceforge.net|150.65.7.130|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 101519489 (97M) [application/octet-stream]
Saving to: 'open_gapps-arm-10.0-pico-20200515.zip'
open_gapps-arm-10.0-pico-2020 100%[=================================================>] 96.82M 3.25MB/s in 36s
2020-05-15 06:23:11 (2.73 MB/s) - 'open_gapps-arm-10.0-pico-20200515.zip' saved [101519489/101519489]
--2020-05-15 06:23:11-- https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip
Resolving github.com... 52.64.108.95
Connecting to github.com|52.64.108.95|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://github-production-release-asset-2e65be.s3.amazonaws.com/67702184/81204200-6ca5-11ea-8f19-3a5b8341b6e2?
X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20200515%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-
Date=20200515T072529Z&X-Amz-Expires=300&X-Amz-Signature=681f649c20ad2b0eabf80411650867d6db9144197a42a639a13162209f0fff91
&X-Amz-SignedHeaders=host&actor_id=0&repo_id=67702184&response-content-disposition=attachment%3B%20filename%3DMagisk-v20
.4.zip&response-content-type=application%2Foctet-stream [following]
--2020-05-15 06:23:11-- https://github-production-release-asset-2e65be.s3.amazonaws.com/67702184/81204200-6ca5-11ea-8f1
9-3a5b8341b6e2?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20200515%2Fus-east-1%2Fs3%2Faws4
_request&X-Amz-Date=20200515T072529Z&X-Amz-Expires=300&X-Amz-Signature=681f649c20ad2b0eabf80411650867d6db9144197a42a639a
13162209f0fff91&X-Amz-SignedHeaders=host&actor_id=0&repo_id=67702184&response-content-disposition=attachment%3B%20filena
me%3DMagisk-v20.4.zip&response-content-type=application%2Foctet-stream
Resolving github-production-release-asset-2e65be.s3.amazonaws.com... 52.216.134.219
Connecting to github-production-release-asset-2e65be.s3.amazonaws.com|52.216.134.219|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 5942417 (5.7M) [application/octet-stream]
Saving to: 'Magisk-v20.4.zip'
Magisk-v20.4.zip 100%[=================================================>] 5.67M 2.30MB/s in 2.5s
2020-05-15 06:23:15 (2.30 MB/s) - 'Magisk-v20.4.zip' saved [5942417/5942417]
--2020-05-15 06:23:15-- https://forum.xda-developers.com/attachment.php?attachmentid=4480528
Resolving forum.xda-developers.com... 104.18.19.88, 104.18.18.88
Connecting to forum.xda-developers.com|104.18.19.88|:443... connected.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: https://dl.xda-cdn.com/4/4/8/0/5/2/8/sysrepart.zip?key=Wwfo1oqhImScVpTSzXTlzA&ts=1589527594 [following]
--2020-05-15 06:23:16-- https://dl.xda-cdn.com/4/4/8/0/5/2/8/sysrepart.zip?key=Wwfo1oqhImScVpTSzXTlzA&ts=1589527594
Resolving dl.xda-cdn.com... 104.27.191.76, 104.27.190.76
Connecting to dl.xda-cdn.com|104.27.191.76|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 782958 (765K) [application/zip]
Saving to: 'sysrepart.zip'
sysrepart.zip 100%[=================================================>] 764.61K 591KB/s in 1.3s
2020-05-15 06:23:20 (591 KB/s) - 'sysrepart.zip' saved [782958/782958]
Press any key to continue . . .
1. boot the Nexus in fastboot mode: when OFF press POWER + VOLUME DOWN
2. when in the bootloader menu, connect it to your PC
3. wait a few seconds, then...
Press any key to continue . . .
Verify...
Lock status...
Flash TWRP? [y/n]: y
sending 'recovery' (9054 KB)...
OKAY [ 0.297s]
writing 'recovery'...
OKAY [ 0.516s]
finished. total time: 0.812s
1. on N7 select "Recovery mode" with volume button
2. on N7 press power button to boot Recovery
3. when you see TWRP main menu press any key to continue
Wait...
*
Installing...
*****
Repartition? (no if already repartitioned) [y/n]: y
Transferring: 782958/782958 (100%)
2575 KB/s (782958 bytes in 0.296s)
***
Wait...
Installing zip file '/sdcard/sysrepart.zip'
Checking for Digest file...
###############################
# k23m Nexus 7'13 Repartition #
###############################
Creating log and gpt backup
Removing partitions
Creating new partitions
Formatting new partitions
###############################
Operation completed. Copy backup gpt and log files from internal storage to PC before rebooting.
###############################
Done processing script file
***
...REBOOTING
When you see TWRP main menu press any key to continue...
*****
Proceed only if you really see TWRP main menu
Press any key to continue . . .
Do dirty flash? (no if unsure) [y/n]: n
Wiping data without wiping /data/media ...
Done.
Formatting Cache using make_ext4fs...
Done processing script file
Formatting System using make_ext4fs...
Done processing script file
Wiping Cache & Dalvik...
-- Dalvik Cache Directories Wipe Complete!
Done processing script file
Formatting cache using make_ext4fs...
Done processing script file
***
Transferring: 413523888/413523888 (100%)
3649 KB/s (413523888 bytes in 110.640s)
***
Wait...
Installing zip file '/sdcard/lineage-17.1-20200515-UNOFFICIAL-flo.zip'
Checking for Digest file...
Warning: No file_contextsTarget: google/razor/flo:6.0.1/MOB30X/3036618:user/release-keysPatching system image unconditio
nally...script succeeded: result was [1.000000]Done processing script file
Install root? [y/n]: y
Transferring: 5942417/5942417 (100%)
3868 KB/s (5942417 bytes in 1.500s)
***
Wait...
Installing zip file '/sdcard/Magisk-v20.4.zip'
Checking for Digest file...
***********************
Magisk 20.4 Installer
***********************
- Mounting /system
- Device is system-as-root
- Mounting /apex/com.android.conscrypt
- Mounting /apex/com.android.media
- Mounting /apex/com.android.media.swcodec
- Mounting /apex/com.android.resolv
- Mounting /apex/com.android.runtime
- Mounting /apex/com.android.tzdata
- System-as-root, keep dm/avb-verity
- Target image: /dev/block/mmcblk0p14
- Device platform: arm
- Constructing environment
- Adding addon.d survival script
- Unpacking boot image
- Checking ramdisk status
- Stock boot image detected
- Patching ramdisk
- Repacking boot image
- Flashing new boot image
- Unmounting partitions
- Done
Done processing script file
Install GApps? [y/n]: y
Transferring: 101519489/101519489 (100%)
3623 KB/s (101519489 bytes in 27.359s)
***
Wait...
Installing zip file '/sdcard/open_gapps-arm-10.0-pico-20200515.zip'
Checking for Digest file...
##############################
_____ _____ ___ ____
/ _ \ | __ \ / _ \ | _ \
| / \ || |__) | |_| || | \ \
| | | || ___/| __/ | | | |
| \ / || | \ |__ | | | |
\_/ \_/ |_| \___| |_| |_|
___ _ ___ ___ ___
/ __| /_\ | _ \ _ \/ __|
| (_ |/ _ \| _/ _/\__ \
\___/_/ \_\_| |_| |___/
##############################
Open GApps pico 10.0 - 20200515
- Mounting partitions
- Gathering device & ROM information
- Performing system space calculations
- Removing existing/obsolete Apps
- Installing core GApps
- Installing swypelibs
- Installing calsync
- Installing googletts
- Installing packageinstallergoogle
- Miscellaneous tasks
- Copying Log to /sdcard
- Installation complete!
- Unmounting partitions
Done processing script file
***
Done.
Press any key to continue . . .
SUPPORT - http://bit.ly/2C35sLZ
Press any key to exit...
_____________________________________________________
REPARTITION
sysrepart.zip - 1.1GB system, data is not wiped
sysrepart-max.zip - 1.3GB system, data is not wiped, automatically downloaded by LOS 17.1 script
sysrepart-flox.zip - 1.5GB system, data is wiped, 'vendor' partition is added, automatically downloaded by LOS 17.1-flox script
sysrepart-ultimate.zip - 4GB system, data is wiped, 'vendor' partition is added, 'recovery' is enlarged to 64MB in-place and your current TWRP continues to function, flox compatible, automatically downloaded by LOS 18.1-flox script. For N7-16GB try sysrepart-ultimate-2.zip
sysrepart-stock.zip - data is wiped, original partitions are restored
reboot immediately after repartition!
sysrepart-ultimate/stock work on any previous repartitions
sysrepart/max/flox work reliably only on original partitions
to install GApps larger than pico/nano you need sysrepart-ultimate
sysrepart-ultimate supports custom, oversized TWRP builds
To recover from other repartition attempts, simply install sysrepart-ultimate if you intend to use LOS17+ or sysrepart-stock if you have other plans. If direct sysrepart installation is impossible due to TWRP or GPT issues, run the repartition.bat script. On rare occasions you may have to run RESTOCK and "Restore original partitions" with it.
_____________________________________________________
UPDATE version 2.5 changes:
- update components' URLs
- update relog.bat
- remove installation scripts of no longer available ROMs
- add update.bat cleanup script (run it once)
- add repartition.bat script for repartition-only
- add lineage-install-3.bat script
Download CROSS2.zip and unzip it then download cross-update-XXX.zip and unzip it to the CROSS folder, overwrite existing files.
Also check the very latest interim updates in this post https://forum.xda-developers.com/t/iiiii-cross-custom-rom-scripted-setup.4092215/post-87622749
____________________________________________________
NOTE - most of the attached files are meant for direct script download. Except for CROSS and its updates do not download them manually unless you know what you are doing.

Hi, thank you very much for this useful tool.
I wonder whether your script could be updated to support dirty flash also. Now it seems to always make a clean flash. But it is not very convenient to set up the device after each security update.
I am not very experienced in making batch files but I was thinking about adjusting your script like follows. From:
Code:
:adbd
ping -n 3 127.0.0.1 >nul
set /p =*<nul
adb devices >tmp0 2>&1
find /i "recovery" tmp0 >nul
if not %errorlevel% == 0 goto adbd
[COLOR="Red"]echo.
echo Installing...
call:wait 5
adb shell twrp wipe /data[/COLOR]
adb shell twrp wipe /system
adb shell twrp wipe dalvik
adb shell twrp wipe cache
call:wait 3
adb push -p %LNZN% /sdcard/
call:wait 3
echo Wait...
adb shell twrp install /sdcard/%LNZN%
To:
Code:
:adbd
ping -n 3 127.0.0.1 >nul
set /p =*<nul
adb devices >tmp0 2>&1
find /i "recovery" tmp0 >nul
if not %errorlevel% == 0 goto adbd
[COLOR="red"]echo.
set /p FLASHTYPE=Do you want to make clean flash or dirty flash? Clean flash will erase all data (except the files in the internal storage) [clean/dirty]: || set FLASHTYPE=null
echo Installing...
call:wait 5
if /i %FLASHTYPE%==dirty (
echo Skipping wiping data...
echo Performing dirty flash...
goto dirty)
if /i %FLASHTYPE%==clean (
adb shell twrp wipe /data
)
:dirty[/COLOR]
adb shell twrp wipe /system
adb shell twrp wipe dalvik
adb shell twrp wipe cache
call:wait 3
adb push -p %LNZN% /sdcard/
call:wait 3
echo Wait...
adb shell twrp install /sdcard/%LNZN%
Any comment on this? Would this worked correctly?

prorokrak said:
....Any comment on this? Would this worked correctly?
Click to expand...
Click to collapse
Thanks for the suggestion. This code can be abbreviated, same as the other optional items:
Code:
set /p ANS=Do dirty flash? (no if unsure) [y/n]: || set ANS=n
if /i !ANS!==n (
adb shell twrp wipe /data
)
I added it to the v1.2 update.

I just gave this script a try. This is quite slick and saves a bunch of time! Thanks for this. :good:

CROSS 2 release
CROSS version 2.0
- new log script
- new fstrim script
- updated components' URLs
- removed LOS microG as it is no longer available
Both LineageOS 14.1 and LineageOS 17.1 install flawlessly. There may be temporary download issues. If so, retry later. LOS17 server errors...
Code:
Resolving lineageos.wickenberg.nu... 83.209.185.118
Connecting to lineageos.wickenberg.nu|83.209.185.118|:443... connected.
HTTP request sent, awaiting response... 500 Internal Server Error
2020-10-11 10:13:40 ERROR 500: Internal Server Error.
:highfive:

Hello I came here from my topic where you suggested me using this. When I fire up lineage-installer2.bat, it can't connect to the server. It asks if I want to use a local file, which I answered yes to. When i gave the name of the file ( "lineage-17.1-20201007-UNOFFICIAL-flo.zip" which I placed inside the CROSS folder, it gave me an error and exited.. What's the deal there?

jelles01 said:
Hello I came here from my topic where you suggested me using this. When I fire up lineage-installer2.bat, it can't connect to the server. It asks if I want to use a local file, which I answered yes to. When i gave the name of the file ( "lineage-17.1-20201007-UNOFFICIAL-flo.zip" which I placed inside the CROSS folder, it gave me an error and exited.. What's the deal there?
Click to expand...
Click to collapse
Hi again, first copy eg "lineage-17.1-20201009-UNOFFICIAL-flo.zip" to "CROSS\data" folder, then answer [y] to the question...
Code:
Nexus 7'13 LineageOS 17.1 Install v2.0 @2020 k23m
SUPPORT - http://bit.ly/2C35sLZ
This script assumes that USB drivers are already installed.
If not, then run RESTOCK first or install them manually.
Enter device name (flo=WiFi; deb=LTE) - [flo/deb]: flo
Use local ROM file? (no if unsure) [y/n]: y
Found local file: lineage-17.1-20201009-UNOFFICIAL-flo.zip
As you can see it is found automatically without entering a file name. If nothing is found, you could type any file name but the file must be located in the data folder.

It has worked! The install and setup was buttery smooth, thank you so much for this tool. Amazing!

A little help.
I am about to receive my refurbished unit in a couple of days. chances are that it will likely be on the last stock software. I have a general knowledge about rooting and installing custom ROMs on a variety of devices but nexus 7 seems different to work it. Will this script automatically root and install the TWRP apart from the designated flavor of lineageOS?
Also, will I need to go through the prerequisites (i.e. RESTOCK) procedures even if I am on stock ROM and partition by default? Will I need to repartition every time when switching ROMs after this? Can the CROSS be used again if i had to switch from say LOS 17.1 to 14.1?
Thanks in advance!:highfive:

GeekyTanuj said:
I am about to receive my refurbished unit in a couple of days. chances are that it will likely be on the last stock software. I have a general knowledge about rooting and installing custom ROMs on a variety of devices but nexus 7 seems different to work it. Will this script automatically root and install the TWRP apart from the designated flavor of lineageOS?
Also, will I need to go through the prerequisites (i.e. RESTOCK) procedures even if I am on stock ROM and partition by default? Will I need to repartition every time when switching ROMs after this? Can the CROSS be used again if i had to switch from say LOS 17.1 to 14.1? Thanks in advance!:highfive:
Click to expand...
Click to collapse
Refurbished N7s usually come with old KitKat stock and it is advisable to run RESTOCK first to update the bootloader before flashing LineageOS. Also RESTOCK will unlock it and install N7 USB drivers on your Windows.
Yes, CROSS can be used multiple times, and will root and install TWRP. Repartition is required only once.
Pro tip: for LineageOS updates answer [y] to the "Do dirty flash?" question to retain your OS settings and apps. But being "dirty", it may not work properly after major OS changes.
Should there be LOS17 server download issues, get lineage-17.1-20201017-UNOFFICIAL-flo.zip from an alternative server and drop it into CROSS' data folder as described in this post.
Cheers
:highfive:

You are a lifesaver!
k23m said:
Refurbished N7s usually come with old KitKat stock and it is advisable to run RESTOCK first to update the bootloader before flashing LineageOS. Also RESTOCK will unlock it and install N7 USB drivers on your Windows.
Yes, CROSS can be used multiple times, and will root and install TWRP. Repartition is required only once.
Pro tip: for LineageOS updates answer [y] to the "Do dirty flash?" question to retain your OS settings and apps. But being "dirty", it may not work properly after major OS changes.
Should there be LOS17 server download issues, get lineage-17.1-20201017-UNOFFICIAL-flo.zip from an alternative server and drop it into CROSS' data folder as described in this post.
Cheers
:highfive:
Click to expand...
Click to collapse
Thank you so much for developing this, RESTOCK as well as stock MM debloat script. it literally saved hours and hours of hassle that one has to face while getting to different versions of android! Running 10 with latest updates. feels so good!

kernel Configuration.
While Android 10 seems tempting and it actually is, it isn't just offering the kind of experience I am looking for and hinders my daily experience in one or the other way.
Looks like you might be using LOS 14.1 with the ElementalX kernel. Can you recommend the best settings for video playbacks and light gaming? Please share your configuration as well.
Thanks and cheers!:highfive:

GeekyTanuj said:
While Android 10 seems tempting and it actually is, it isn't just offering the kind of experience I am looking for and hinders my daily experience in one or the other way.
Looks like you might be using LOS 14.1 with the ElementalX kernel. Can you recommend the best settings for video playbacks and light gaming? Please share your configuration as well.
Thanks and cheers!:highfive:
Click to expand...
Click to collapse
For video and games LOS17 seems optimal, check these benchmarks.
Personally I use LOS14 without Gapps and with EX kernel including a modification to the battery life extender. I lowered max battery charge to 4.00V which is equivalent to 75% (under)charge resulting in 8x increase of battery life. Furthermore, the mod allows for constant external power connection and no battery overcharging nor overheating/swelling. I edited "buildconfig.sh" in EX zip:
Code:
replace
echo "write /sys/devices/i2c-0/0-006a/float_voltage 4200" >> $CONFIGFILE
with
echo "write /sys/devices/i2c-0/0-006a/float_voltage 4000" >> $CONFIGFILE
:good:

You gave my Nexus 7 (2013) a new lease on life! Woo-hoo!
I was running a years-old version of the vanilla stock FW and it was soooo slow. Somebody in some comment section somewhere mentioned RESTOCK & CROSS, so I tried out RESTOCK2 and it worked flawlessly.
Then I tried installing 17.1 via CROSS2 without repartitioning (as I believed RESTOCK did that). I got an error that I did not save, hoping it wasn't a big deal. I got stuck on the Google loading screen, so I ran CROSS again. I was going to try 14.1, but wasn't given the option again (bonus? 17.1 looks beautiful and it didn't make me redownload anything, which was smart coding on your part).
I think I should have run the logging programs when I first saw errors, because I'm afraid they were cleared by the reinstallation. I did send what I could after running the loggers post-successful installation, just in case.
Now, 17.1 is working so smoothly with a quick Netflix sideload (no GApps here, used APKMirror + the APKMirror Installer) - which certainly is only working thanks to Magisk. How long did it take me to figure out how to put app icons on the homescreen (swipe up, of course!) I don't think I want to reveal
I think the only thing I'm missing is DoubleTap2Wake which I installed with RESTOCK but see now it wasn't an option with 17.1 via CROSS. Apparently somebody has it goin' on LOS17.1 or 18 but this was so easy, not sure I want to try messing with a custom kernel just yet until I get a little bored.
Thank you so much--it's unbelievable there aren't 8 million comments on this thread, it's SO well done. If you made this for a modern/uber-popular tablet surely there would be though. Thank you thank you thank you!

iforget said:
I think the only thing I'm missing is DoubleTap2Wake which I installed with RESTOCK but see now it wasn't an option with 17.1 via CROSS. Apparently somebody has it goin' on LOS17.1 or 18 but this was so easy, not sure I want to try messing with a custom kernel just yet until I get a little bored.
Thank you so much--it's unbelievable there aren't 8 million comments on this thread, it's SO well done. If you made this for a modern/uber-popular tablet surely there would be though. Thank you thank you thank you!
Click to expand...
Click to collapse
If the Lineage build is using followmsi's sources, then you do not need to change kernels.
You just need to activate DT2W.
See this post on how to activate using a kernel manager.
The thread with the ever changing name. xda thread - Link
If you want something simple, I use a magisk module that enables it on boot.
DT2W GitHub - Link
Cheers.
PS.
Sorry for a bit of OT.
PPS.
The Lineage 17.1 build is using followmsi's sources.

hi
I have issue with otg on my N7, i used cross2 without problems : i installed twrp, lineageos 14, root the nexus and installed elementalx and googleapp
my usb otg cable with a usb key is never detected , i can mount the usbstick with twrp (sometime i can see it sometime not in twrp) but after few minutes it diseppear
someone can help me ?
it's a kernel issue?
any app works
thx

gibnexus said:
my usb otg cable with a usb key is never detected , i can mount the usbstick with twrp (sometime i can see it sometime not in twrp) but after few minutes it diseppear
someone can help me ? it's a kernel issue?
Click to expand...
Click to collapse
LOS14+EX kernel OTG is OK. Use the built-in file manager.
There could be a hardware issue - pin #4 may have a dry joint and work intermittently.

k23m said:
LOS14+EX kernel OTG is OK. Use the built-in file manager.
There could be a hardware issue - pin #4 may have a dry joint and work intermittently.
Click to expand...
Click to collapse
Hi man
thanks for your answer but it’s not a pin 4 issues , I have just changed the daughter board, and this evening I used restock2 , I restocked, install twrp, used the fix 30 and root but don’t install elementalx
I used the app usb otg helper and everything is ok
I can see my usb stick..
Help me please .. I like s2w and 2tw to turn on my screen
I would have the both otg and gesture to awake and used a better android system like lineageos
Thx

gibnexus said:
Hi man
thanks for your answer but it’s not a pin 4 issues , I have just changed the daughter board, and this evening I used restock2 , I restocked, install twrp, used the fix 30 and root but don’t install elementalx
I used the app usb otg helper and everything is ok
I can see my usb stick..
Help me please .. I like s2w and 2tw to turn on my screen
I would have the both otg and gesture to awake and used a better android system like lineageos
Thx
Click to expand...
Click to collapse
Hi
I begin to believe it’s my otg cable who has some trouble
I will buy a new one and see ...
Just a last question elementalx and los 14 support otg without nothing else ? ( no app or addons ? )
So thx to you for your work my old nexus was sleeping in a corner and now it’s relive
Thx for all

gibnexus said:
Hi
I begin to believe it’s my otg cable who has some trouble
I will buy a new one and see ...
Just a last question elementalx and los 14 support otg without nothing else ? ( no app or addons ? )
So thx to you for your work my old nexus was sleeping in a corner and now it’s relive
Thx for all
Click to expand...
Click to collapse
I can assure you that straight LOS14+EX OTG works fine.
You must have enabled the "USB OTG + charge mode" option which is meant for car use or externally powered OTG devices. It is NOT NEEDED for normal, N7-powered OTG storage.

[GUIDE] Install Android 11 On J7 2016/J7 Nxt/J7 Prime

A simple guide to help you install Android 11 Beta on your Exynos7870 device.
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Devices Supported - J7 2016, J7 Nxt, J7 Prime and other Exynos7870 devices.
Installation -
1. Boot into custom recovery. (OrangeFox recommended)
2. Repartition system size. Check guide here - https://forum.xda-developers.com/sa...es/tool-universal-repartition-script-t4143541 (Note - Use at your own risk. If you want to restore stock size, flash PIT file in Odin) (Note - Repartitioning will erase your internal storage so backup your data before)
3. Format data and reboot into recovery.
4. Wipe system, data, dalvik cache, cache. (If you get any error related to mounting of /cache, resize FS for cache)
5. Flash Exynos7870_CreateVendor_V2.0 zip.
6. Reboot into recovery again.
7. Flash Android 11 GSI.
8. Flash H-Vendor V1.0 zip.
9. Reboot. It may bootloop once or twice so let it rest for a few minutes until it boots fine.
10. Open Files app and install GooglePlayServices apk.
11. Now you can setup your Google account.
12. For root access, flash Magisk canary zip.
Working -
WiFI
Bluetooth
GPS
Camera (OpenCamera tested)
Hardware keys
Flashlight
Not tested -
RIL (Can't test as I don't have a spare sim)
Mobile data
Bugs -
Hotspot
And more which I don't know + Android 11 Beta bugs
Downloads -
Android 11 GSI - https://mirrors.lolinet.com/firmware/gsi/Pixel/Pixel-AB-11-20200909-ErfanGSI.img-0125.7z
CreateVendor zip - https://drive.google.com/file/d/19_yXIWkfPicXtAA-iE2ngCl1StTUy7ek/view?usp=sharing
H-Vendor v1.0 - https://forum.xda-developers.com/ga...opment-and-mods/treble-h-vendor-v1-0-t4116281
GooglePlayServices apk - https://www.apkmirror.com/apk/googl...0400-320008519-android-apk-download/download/
Magisk canary - https://github.com/topjohnwu/magisk_files/blob/canary/magisk-debug.zip
Repartitioner tool - https://forum.xda-developers.com/sa...es/tool-universal-repartition-script-t4143541
PIT file - https://drive.google.com/drive/folders/1PyflE9X8uTUEw4x8HriT7rpeJgjHwK-s
Credits -
@Astrako for H-Vendor, repartitioner tool
@erfanoabdi for Android 11 GSI
@ananjaser1211 for Project Spaget X
Thanks to all Exynos7870 Devs for working hard!

on j7 2016 it restarts very often and nothing changed for 30 minutes that it was resting

d1r3 said:
on j7 2016 it restarts very often and nothing changed for 30 minutes that it was resting
Click to expand...
Click to collapse
Are you using a sim? Try switching to Airplane mode and see if it still restarts.

has how to disable the navbar?

Ruturaj Kadam said:
A simple guide to help you install Android 11 Beta on your Exynos7870 device.
​
Click to expand...
Click to collapse
Are you still making this rom? need fixes !

Hello, the link for the pit file is dead, can you update the link?
Thanks.

Is the hotspot bug still there?

Voice echo problem....

I keep getting the "invalid zip file format" when I try to flash the GSI file

I keep getting the "invalid zip file format" when I try to flash the GSI file

Çukur dosya bağlantısı çalışmıyor. linki yeniler misin
If my english disturbed you, forgive me...

And I don't know why but UI usually downs and system does fast restaring. (In restarting think like Samsung Galaxy J7 Prime logo isn't show itself but Google logo shows itself)

[ROM][13][UNOFFICIAL] LineageOS 20 for Lenovo P2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
LineageOS is a free, community built, aftermarket firmware distribution of Android 13 (T), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Githup repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
Installation Instructions:
Backup your data and see the next post below
Recommended TWRP Image:
twrp-3.7.0_9-0-kuntao.img
ROM Download Links:
Google Drive | SourceForge
Recommended Google Apps Package:
NikGapps-core-13
NikGapps-SetupWizard
NikGapps-AndroidAuto
Root Access:
Magisk v25.2
Source Code:
https://github.com/LineageOS
ROM Firmware Required:
Any version of stock 6.0. Recommended P2a42_S251_171107_ROW
Acknowledgements:
Thanks to all Lineage OS developers
Special thanks to @Astridxx & @XiaoAk for the device tree sources and to @Astridxx for (once again) helping me out
Important Notes:
As you can see from my profile, I'm not an experienced developer. I've made some builds as a considerable amount of users showed interest in having their devices updated with latest LineageOS code. Therefore, my main objective here is to bring the latest Android security patches to kuntao making monthly builds.
To be clear, I'm more in a situation of "user became builder" than of "ROM developer". Please, understand this.
Long live to our beloved kuntao!
XDAevDB Information
[ROM][13][UNOFFICIAL] LineageOS 20 for Lenovo P2
Contributors
@Astridxx ,@XiaoAk
ROM OS Version: 13.x
ROM Kernel: Linux 3.18.x
Based On: LineageOS
Version Information
Status: Stable
Created 2023-03-05
Last Updated 2023-04-20

Installation Instructions​
Remember, making a backup of your data before proceeding is recommended
If you are coming from Stock ROM, please refer first to the instructions below:
Install LineageOS on kuntao
If you are coming from any version of LOS18.1 or LOS19.1 or from any ROM that isn't android 13 based, you must perform a clean flash:
0- Make a backup (optional, but recommended)
1- Reboot to recovery
2- Format data (will delete all your data!)
3- Reboot to recovery again
4- Wipe > Advanced Wipe:
- Dalvik
- System
- Vendor
- Data
- Cache
- Internal Storage (optional, but recommended)
5- Flash ROM ZIP, Gapps, Gapps add-ons, Magisk add-on, etc
6- Reboot to system
7- Wait until it boots for the first time (may take some minutes)
8- If Magisk is missing after finishing the setup wizard, please reboot to system
Update Instructions​
For updating from one of my builds to another (aka dirty flashing), please do the following:
1- Download ROM ZIP and copy it to the phone
2- Reboot to recovery
3- Flash ROM ZIP
4- Clean cache
5- Reboot to system

Known Issues​
- Storage encryption is broken ( FDE was deprecated in a13 )
- Network traffic monitoring ( 4.9 kernel required for this )
- GPU monitoring ( 4.9 kernel required for this )
ROM Doesn't Boot After Flashing​
Make sure you formatted /data partition (see installation instructions step 2)
SafetyNet Status Fix Instructions​
1- Make sure Magisk was properly installed
2- Open the Magisk App
3- Open App settings (wheel on the top right side of the screen)
4- Enable "Zygisk"
5- Enable "DenyList"
6- Open "Configure DenyList"
6.1- On "Google Play services": Enable "com.google.android.gms" & "com.google.android.gms.unstable"
6.2- On "Google Play Store": Enable "com.android.vending"
7- Click on the back arrow (on top left)
8- Reboot your system
9- Test again (now it should pass)
ROM Change logs​
Code:
03/05/2023
- Initial release
03/30/2023
- Fetch latest Device Tree
-- Sepolicy:
--- Address sensor hal denials
--- Address launcher3 denials
--- Allow some apps to access debuggable prop
-- rootdir:
--- Create STSensorHAL folder on data
--- Restore iio sensor device6 on boot
--- Add cpuset for the camera daemon
-- overlays:
--- Disable IMS features for Turkiye networks
--- Enable voWIFI support
-- prop:
--- Disable Bluetooth APCF Extended features
--- Enable ro.hwui.render_ahead and set it to 20 frames
-- Enable selinux ignore never allow flag
-- Don't force enable ims features
-- Remove aptX(HD) encoder shared libs
-- vendorsetup.sh: Add Trebuchet patch
- Update LOS components
-- Manifest:
--- Sync x86_64 webview prebuilts again
--- March 2023 Quarterly Platform Release and Security update
--- gs101 March 2023 Quarterly Platform Release and Security update
-- Update zlib source
- Sync latest LOS sources
- Update platform to android-13.0.0_r35
- Merge March security patch
04/20/2023
- Fetch latest Device Tree:
-- Set default livedisplay mode to 0
-- vendorsetup.sh: Add DeskClock patch
-- trebuchet:
--- Make overview scrim transparent again
--- Kill haptics in recents
-- nfc: Fix Mifare Classic reading
-- sepolicy:
--- Silence suspend_control_service neverallow denial
--- Silence tracingproxy_service neverallow denial
--- Silence fsck_untrusted neverallow denial
--- Allow system_app to access storaged via IPC
-- overlay: Allow gms to access persistent data partition
-- props:
--- Silence ResourcesCompat spam
--- Remove hwui skia atrace properties
--- Disable virtual displays writeback
-- Revert "sepolicy: Allow some apps to access debuggable prop"
- Sync latest LOS sources:
-- lineage: Track the FMRadio App and dependencies
-- Move Trebuchet to default.xml
-- overlay:
--- Disable immersive mode confirmation
--- Move default status bar height to no-rro
-- soong: Bring bootloader_message_offset back
-- envsetup: aospremote: Take .gitupstream into account
- Update platform to android-13.0.0_r41
- Merge April security patch

ROM Screenshots​
Attached below.

Great work! Will test it when I have time, been waiting for this..

Hi all. I read these P2 forums for long time, but never participated. I love our P2 phone, riding a P2 since the release date and never changed. Now I got a message from my bank that the android version is too outdated to use their banking app, and they want me to switch to a newer OS. I could have ditched the P2, but couldn't. Therefore....easiest solution was to buy a second one xD I will test on the backup unit some of the roms available here, probably starting from the roms of @leo_97 . I need a stable daily driver, thus when I find something that works for me I will freeze it there for some time. But, in the meantime, I can help out with testing, starting from mid April onwards thus, feel free to contact me, and I will be a bit more active (and not passive) here in XDA for the coming months.
Cheers to all, and thanks @leo_97 , @Astridxx, @XiaoAk (and @mikeioannina for all the past efforts on P2!).

Hi
I just tested it on a P2 for a few hours and it works great! Thanks!
Is there any way to get full device encryption to work?
If I understand correctly, someone can access the phone's files even if you have a pin or password as it is now.

MKbis said:
But, in the meantime, I can help out with testing, starting from mid April onwards thus, feel free to contact me, and I will be a bit more active (and not passive) here in XDA for the coming months.
Click to expand...
Click to collapse
I'll PM you right away.
Draywen said:
Hi
I just tested it on a P2 for a few hours and it works great! Thanks!
Is there any way to get full device encryption to work?
If I understand correctly, someone can access the phone's files even if you have a pin or password as it is now.
Click to expand...
Click to collapse
You are welcome
So, IFAIK we don't have a way to make FDE work on A13 ROMs, A13 moved to FBE (File Based Encryption) which is not supported by 3.18.x kernel and we don't have rn a patch available that could enable it on our kernel version.
Regarding data access, I believe so. Without storage encryption, booting into recovery will already give access to the files. IIRC to this date encryption is fully working only on A11-based ROMs and maybe on some A12 ones.

Okay, so I'm stuck in a boot loop. I flashed the ROM from the link above but the phone won't start up. I just get the Lineage booting screen with the circle moving right to left. I've left it for 15 minutes just in case the first boot was slow but nothing else happens. I've tried to restore my original backup which was Lineage 17.1. It seemed to work, no errors from TWRP but now i just get the Lenovo screen and then it boots to fastboot mode. I flashed Lineage 20 for a second time but the same happened. I tried a different backup from August last year, again it just boots to fastboot.
Any ideas?
Cheers, Si.
EDIT: I've just noticed that I missed out step 3, reboot to recovery between Data wipe and flash ROM.
Now it boots no problem.
Cheers, Simon.
EDIT AGAIN: I still can't revert to either of my previous backups of Lineage 17.1. I would really like to be able to do this. Can anyone suggest why it will only boot to fastboot mode after a seemingly successful restore?
Thank you,
Simon.

@simes303
Don't know what the problem is, but I'd flash stock via fastboot. Then reinstall TWRP and restore LOS.
When things go wrong it's better to start from scratch rather than tinkering around and doing temporary fixes.

how is the battry life anyone?

eried1 said:
@simes303
Don't know what the problem is, but I'd flash stock via fastboot. Then reinstall TWRP and restore LOS.
When things go wrong it's better to start from scratch rather than tinkering around and doing temporary fixes.
Click to expand...
Click to collapse
Hi,
How is this different from flashing stock with TWRP?
Cheers, Si.

Used briefly but battery life seems worse, its like draining. Using 12L Lineage os and its way better.

mahmutpekkara said:
Used briefly but battery life seems worse, its like draining. Using 12L Lineage os and its way better.
Click to expand...
Click to collapse
how long does it last

laggy_boy said:
how long does it last
Click to expand...
Click to collapse
Didn't test much but its way waay noticable, you wouldn't want to use when you see the difference (didn't differ with or without gapps)
btw thx to all devs, using lineage os a12.1 and its good on battery

Battery life for me is considerably better than the Lineage 17.1 that I was using before, no question. I'd estimate almost twice the duration. I'm very happy with this ROM, thanks to all involved in developing it.
Simon.

I've actually just bought a brand new 64 Gb Lenovo P2 pretty cheap from eBay and I will definitely be flashing this Rom onto it.
Thanks again,
Simon.

Hi,
Does this ROM have USB OTG support? I can't get the phone to connect to either my external SSD drive or my bicycle helmet camera since I flashed this ROM. Both these things connected via OTG cable to my phone when I was running Lineage 17.1 and they also connect to the new P2 that I bought recently that still has stock OS. I've tried three OTG checker apps which all state that my phone is OTG compatible.
Thanks, Simon.

March 30th 2023 Release​
Changelog:
- Fetch latest Device Tree sources
- Update LOS components webview & zlib
- Sync latest LOS source
- Merge March security patch
- Many more changes
Full change log available on the bottom of this post
Download URLs: GDrive | SF
Enjoy!

simes303 said:
Hi,
Does this ROM have USB OTG support? I can't get the phone to connect to either my external SSD drive or my bicycle helmet camera since I flashed this ROM. Both these things connected via OTG cable to my phone when I was running Lineage 17.1 and they also connect to the new P2 that I bought recently that still has stock OS. I've tried three OTG checker apps which all state that my phone is OTG compatible.
Thanks, Simon.
Click to expand...
Click to collapse
Hello Simon,
Yes, it does have OTG support. IFAIK it should work correctly with both FAT32 and NTFS partition types on external storage devices.