P10 + does not turn on after update failed - Huawei P10 Plus Questions & Answers

I used firmware finder to perform an update of android 7 with emui 5.1 to android 9
the download was successful but when applying the update it gave an error
after restart it did not turn on
bootloader, recovery mode, usb connection with windows does not work
https://photos.app.goo.gl/F2jg7LFnFFzK9Q846

Related

Error 7, during update

i get error 7 when i try to update my p8 lite tp b612 to b614 using twrp recovery, the update.zip i downloaded through OTA, but as it tries to flash error 7 message shows up n my cell doesnt get update

[Fixed] Device verification error during software installation

So i used firmware finder to update my honor 8 lite and it downloaded the firmware but there was error during installation and i now get defice verification failed everytime i restart my mobile. Phone works properly. Is there any way to fix it? And can i unlock bootloader and install twrp in this condition??

Huawei P9 Lite VNS-L31 stuck in error mode, please help!

I've been trying to update my phone to emui 5.0, every time it just says update failed. I also tried to flash custom roms through twrp, which always make my build number to something about test-keys. Maybe I'm just to dum. I wiped the system and tried again, but when booted to fastboot it says locked bootloader(it isn't what I want) so I unlocked the bootloader. Now it somehow only boots into the error mode: NO11(recovery image) and NO2(load failed).
I tried button combinations, it just keeps booting to error mode(I also read through other threads, but the solutions like waiting till the phone dies, than press volume - and connect to pc didn't work).
PLEAEAEAS Help!!!

Need help with Getting package info failed (Huawei Nova Plus)

Hello mates, hope u r doing well,
I have a problem with my Huawei Nova Plus AL10 (chineese version), i tried to update the version from 6 toNougat 7 with Huawei firmware finder, when arrived at 100%, it reboots and stucks in Huawei eRecovery (Getting package info failed msg appears).
Than i tried to downlad the official firmware AL10 (chineese version) and flash the phone with sd card (Dload==>Update), it loads and stops in 5% or 49%, the eRecovery and factory reset has never managed to download anything for me, always failed...
NB: Fastboot is working
Any help please neeeeeeeed solution
Fastboot should work,boot into it ( press and hold Volume Down and Power key for a while. You would see a green android.) and make sure you have adb/fastboot drivers installed then try. If that works, you can flash twrp and then a rom

Qhsb_bulk mode while trying to install nokia 6 firmware on ta-1053

I had NOKIA 5 with latest pie update installed
I wanted to flash nokoa 6 ta-1021 rom in it
(I have also successfully installed ta-1000 CN rom in it)
But this this after flashing any older ota update (Dec.2017) I tried to flash with NOST
Although I have unlocked bootloader
But NOST or OST didn't flash and gave an error
Now NOST give me a message that my device is D1C and I am going to flash PLE so confirm it and all data will be erased
Now I confirmed it and it gave me a error of low battery voltage
Now I just boot the phone in recovery mode and power it off so that the phone can get charged
But now it's showing QHSB_BULK in PC
But I just launched NOST and hold the power button
Now my phone is in download mode(thanks to NOST)
BUT the problem is that PC is showing adb interface when the 0hone is in download mode and only adb commands are working
So I typed adb reboot recovery
So I booted in recovery successfully
Now from here I again went in bootloader mode
Now I tried to flash Nokia 5 (ND1) Firmware ,But NOST OR OST both gave an error
I tried ta-1000CN Firmware it also gave an error
Then I tried to flash PLE firmware which I was trying to flash before the phone went in qhsb bulk mode
Now same thing happened when I tried to flash ta-1000 CN firmware
1st-the phone went in qhsb bulk mode because I power off the phone after getting an error
2nd-then using NOST I booted my phone in download mode
Then NOST could only flash ta-1000 model ROMs
So what is it.WHY DOES NOST CAN ONLY FLASH THOSE ROMS WHICH BRICKED MY PHONE A MINUTE EARLY??
AND NOT THE STOCK ONE??
and one thing now I can changed it to Nokia 5 by just flashing any Nokia 5 ota update through applying upadte from sdcard which I downloaded from xda
And now my phone doesn't show POWER BY ANDROID logo while booting
It only shows NOKIA logo
And it doesn't show battery charging icon when the phone is switched off
Other things are working fine(TWRP,magisk)
Except fingerprint data which get lost after flashing any module .
Please read it I know it's very lengthy but suggest me what should I do
Thanks
Can you share guide of install nokia 6 ta1021 rom on nokia 5 running android pie
Jitender Baloda said:
Can you share guide of install nokia 6 ta1021 rom on nokia 5 running android pie
Click to expand...
Click to collapse
Mandatory ---Unlocked Bootloader
1st -download any monthly ota update of Nokia 6
Flash it ,it will be aborted
2nd -download Nokia 6 pie ota update from Nokia 6 forum
Flash it
(Both ota updates should be placed on external sdcard)
If this doesnt work then
Flash your phone with Nokia 6 fastboot firmware provided by hikari calyx
It will be done
If it gives an error then boot your phone to recovery
Shutdown from recovery
Now imp.thing is that your phone may be hard bricked at this time
So pc will show it as qhsb_usb bulk
Don't panic
Just open Nost or ost
And press power button
Your phone would boot into download mode
Now you can flash it with ta-1021
Give me your telegram profile name i need to talk on this

Categories

Resources