Database Users

Want to Flash AT&T or Unlocked Firmware on T-Mobile Device - A Few Questions

So I've spent a few hours searching XDA to find the right resources on how to flash a different U.S. carrier's GS7 Edge firmware on the T-Mobile branded device. I found out that since all the internal hardware for all U.S. devices are identical, I'd be able to flash any one carrier's firmware on to any carrier's device, provided there are no inconsistencies with the bootloader versions of the firmwares.
The phone is intended for an extended family member and I am able to purchase a T-Mobile GS7 Edge for significantly cheaper than from any other carrier. Because it will be used on AT&T's network, I wanted to make sure I got everything right before I get started. I either want to flash the AT&T version which will allow it to be fully compatible on the network, or the Unlocked version. Apparently, the unlocked version is completely debloated since it's not associated with any carrier and provides better benchmarks, especially battery life, so I'm interested in that.
I've compiled the resources I need in the following:
https://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
https://forum.xda-developers.com/att-s7-edge/help/att-t-mobile-bootloader-version-t3473281
https://forum.xda-developers.com/tmobile-s7-edge/help/installed-sm-g935u-sm-g935t-firmware-t3482945
https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
https://forum.xda-developers.com/att-s7-edge/how-to/firmware-pi2-s7-edge-sm-g935a-10-03-16-t3477246
https://forum.xda-developers.com/verizon-s7-edge/how-to/odin-stock-nougat-firmware-t3570156
https://forum.xda-developers.com/att-s7-edge/how-to/updated-935u-935a-live-links-pi3-t3501686
http://updato.com/firmware-archive-select-model?q=SM-G935U&order=date&dir=desc&exact=1
etc.
One question I have is whether I am able to flash the Unlocked firmware at all. I don't currently have the device in hand so I can't check the baseband version, but my understanding is that the Unlocked version is currently on a lower bootloader version whereas it is v4 for AT&T or T.Mobile. This would mean I would be able unable to flash the Unlocked firmware if the device already has a higher version of the bootloader, right? Conversely, I would be able to do so if the T-Mobile bootloader was on the same version as the Unlocked version (e.g., if the device hasn't had an update to its bootloader).. The same issue would arise if I wanted to go back to a carrier firmware. Where can I find a list of T-Mobile firmwares and their bootloader versions so that I can check? Threads I've searched are saying I can't go to 935U from 935A/T because of mismatching bootloaders but others are saying I can go back to 935A/T on Nougat (same bootloader versions?) so clarification would be greatly appreciated.
Edit: Just discovered the bootloader version can be determined by looking at the 9th character in the baseband version. Pretty simple!
Another question I have is whether flashing the AT&T firmware will give me VoLTE, Wifi Calling, tethering, etc. on AT&T's network. I've established that if I flashed the Unlocked firmware, I'll lose these functions (unless I root the phone, but that's a no-go since I need Samsung Pay intact). Just wanted to make sure that I would retain these features if I flashed the AT&T firmware on the T-Mobile device. Also, would I receive all OTAs pushed from AT&T while I'm on their firmware, even though it was a T-Mobile device? Or would I have to manually update it somehow?
Many thanks in advance.

Yes you can flash the unlocked firmware, I do recommend flashing the at&t CP (radio) though for better signal.
For tmobile all we lose is video calling, we retain everything else. I can't answer your other questions since I have not used this phone from tmobile on at&t. I have used the at&t model on tmobile with U and had no issues.
Sent from my SM-G935U using XDA Premium HD app

justda said:
Yes you can flash the unlocked firmware, I do recommend flashing the at&t CP (radio) though for better signal.
For tmobile all we lose is video calling, we retain everything else. I can't answer your other questions since I have not used this phone from tmobile on at&t. I have used the at&t model on tmobile with U and had no issues.
Sent from my SM-G935U using XDA Premium HD app
Click to expand...
Click to collapse
^^^^^this man is correct. Also, is the device you want to flash Carrier unlocked? Even though youre flashing a different carriers firmware or even the U firmware I believe the IMEI still needs to be unlocked from the original carrier. Obviously just pop the at&t sim card in the t mobile phone to see if its unlocked. hope this helps.

black96ss said:
^^^^^this man is correct. Also, is the device you want to flash Carrier unlocked? Even though youre flashing a different carriers firmware or even the U firmware I believe the IMEI still needs to be unlocked from the original carrier. Obviously just pop the at&t sim card in the t mobile phone to see if its unlocked. hope this helps.
Click to expand...
Click to collapse
Yes, it'll be unlocked, so there won't be problems there. If I flash the AT&T firmware and not the Unlocked firmware, I will retain video calling, yes?

justda said:
Yes you can flash the unlocked firmware, I do recommend flashing the at&t CP (radio) though for better signal.
For tmobile all we lose is video calling, we retain everything else. I can't answer your other questions since I have not used this phone from tmobile on at&t. I have used the at&t model on tmobile with U and had no issues.
Sent from my SM-G935U using XDA Premium HD app
Click to expand...
Click to collapse
If I flash the current version of the Unlocked firmware, can I go back to AT&T's or T-Mobile's firmware?

Synchronicities said:
Yes, it'll be unlocked, so there won't be problems there. If I flash the AT&T firmware and not the Unlocked firmware, I will retain video calling, yes?
Click to expand...
Click to collapse
flashing the at&t firmware will just be like having an original at&t s7 edge so yes. The Unlocked firmware will be lighter with no video calling(no carrier apps, no carrier boot animation, some of the quick toggles will be different) you will retain VOLTE HD calling, wifi calling(if at&t has that) and with the at&t you will have all the bloat (about 2-3 GB of used storage plus more a tad bit more use on ram usage) which will use more battery. remember like stated above, if you do decide to flash the U firmware, make sure you flash the latest At&t CP being you will have better coverage since youll be on the at&t network.
Synchronicities said:
If I flash the current version of the Unlocked firmware, can I go back to AT&T's or T-Mobile's firmware?
Click to expand...
Click to collapse
I was able to flash back to T mobile from the U, I never tried anything with a At&t variant or the at&t firmware

I am also interested. If I flash
1) Will the device status remain "Unmodified" - I use Good for Enterprise for work email and it won't function on rooted or modified devices
2) Will Android Pay Work?
3) Will I get Software updates directly?

cnewsgrp said:
I am also interested. If I flash
1) Will the device status remain "Unmodified" - I use Good for Enterprise for work email and it won't function on rooted or modified devices
2) Will Android Pay Work?
3) Will I get Software updates directly?
Click to expand...
Click to collapse
Can someone review and comment?
---------- Post added at 12:24 PM ---------- Previous post was at 12:19 PM ----------
black96ss said:
flashing the at&t firmware will just be like having an original at&t s7 edge so yes. The Unlocked firmware will be lighter with no video calling(no carrier apps, no carrier boot animation, some of the quick toggles will be different) you will retain VOLTE HD calling, wifi calling(if at&t has that) and with the at&t you will have all the bloat (about 2-3 GB of used storage plus more a tad bit more use on ram usage) which will use more battery. remember like stated above, if you do decide to flash the U firmware, make sure you flash the latest At&t CP being you will have better coverage since youll be on the at&t network.
I was able to flash back to T mobile from the U, I never tried anything with a At&t variant or the at&t firmware
Click to expand...
Click to collapse
Does Android Pay work on "U" firmware?
Should I get CP from here => https://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
I this a good thread for instructions to install U firmware on T => https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451

cnewsgrp said:
Can someone review and comment?
---------- Post added at 12:24 PM ---------- Previous post was at 12:19 PM ----------
Does Android Pay work on "U" firmware?
Should I get CP from here => https://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
I this a good thread for instructions to install U firmware on T => https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451
Click to expand...
Click to collapse
Yes and yes
Sent from my SM-G955U1 using XDA-Developers Legacy app

cnewsgrp said:
I am also interested. If I flash
1) Will the device status remain "Unmodified" - I use Good for Enterprise for work email and it won't function on rooted or modified devices
2) Will Android Pay Work?
3) Will I get Software updates directly?
Click to expand...
Click to collapse
I Flashed an AT&T S7 Edge with T-Mobile firmware and:
1) Status remains unmodified
2) Android pay works (as well as Samsung pay)
3) I've already got 2 T-Mobile pushed firmware updates that installed without any issues.
Don't know if this helps, but I'd think it would be the same going from T-Mobile to AT&T.
I did also have to use a modified version of "ODIN" and flash a "PIT" file because T-Mobile has a different partition than AT&T.

pierre3408 said:
I Flashed an AT&T S7 Edge with T-Mobile firmware and:
1) Status remains unmodified
2) Android pay works (as well as Samsung pay)
3) I've already got 2 T-Mobile pushed firmware updates that installed without any issues.
Don't know if this helps, but I'd think it would be the same going from T-Mobile to AT&T.
I did also have to use a modified version of "ODIN" and flash a "PIT" file because T-Mobile has a different partition than AT&T.
Click to expand...
Click to collapse
Thanks! I am almost ready. Final checks
- I downloaded 935U firmware from here https://forum.xda-developers.com/tmobile-s7-edge/how-to/4-28-t-mobile-935-firmware-t3597866 (File is G935UUEU4BQD2_G935UOYM4BQD2_TMB.zip)
- I am planning to use ODIN 3.12.7
- Since I am on ATT Network I will use ATT Radio (CP File). I downloaded ATT firmware from here => https://forum.xda-developers.com/att-s7-edge/how-to/odin-files-to-s4bqc2-g935a-t3582874
I will use this CP => CP_G935AUCS4BQC2_CL10280464_QB12904088_REV02_user_low_ship_MULTI_CERT.tar
Am I doing everything right?
Should I just flash all U files (including Radio) and flash ATT Radio later?
Please advise

Hi team
I have the tmo ime version of the s7 edge, but flash the ATT firmware BQC2 and now I can not go back to tmobile firmware or the U firmware I got the following error in Odin:
Error device info
Who can help me,?I going to gift my s7 edge to my brother and he is on Tmobile network

Galaxy S7 active
I have a at&t Galaxy S7 active unlocked and i transfer my service to T-Mobile but I am not able to get updates can I flash T-Mobile firmware so I can have the T-Mobile interface and updates. What do I need to do to get the updates.

All US variants can flash the firmware interchangeably. Just download the corresponding firmware and flash everything(Except for the modem if you'd want to keep the original modem). You dont need anything special. If the default odin dont work, then try the comey "cracked" version.

Eric1084 said:
All US variants can flash the firmware interchangeably. Just download the corresponding firmware and flash everything(Except for the modem if you'd want to keep the original modem). You dont need anything special. If the default odin dont work, then try the comey "cracked" version.
Click to expand...
Click to collapse
Why is it that we use the CP for AT&T; however, use the Unlocked CP for TMobile? Are the radios the same for the unlocked and T-Mobile variants? Where would I get this information if I needed it in the future?
I have a GS7 edge locked to T-Mobile with the Device Unlock app. Will flashing G9350U firmware unlock my device and bypass the Device Unlock app or will I still need to use this app to unlock?

Radios are different. I flashed ATT Radio after I flashed U firmware. Though honestly I cannot tell the difference

cnewsgrp said:
Radios are different. I flashed ATT Radio after I flashed U firmware. Though honestly I cannot tell the difference
Click to expand...
Click to collapse
you did the sae thing that I am currently doing. going from tmobile (I believe) to AT&T firmware. I am going from verison (which shouldn't matter) but when I did it the first time odin 3.12.7 gave me a message of success after only one "sector" of the whole thing went green. but the phone rebooted to an error message. did I do something wrong? help??

Shadow_Sheik said:
you did the sae thing that I am currently doing. going from tmobile (I believe) to AT&T firmware. I am going from verison (which shouldn't matter) but when I did it the first time odin 3.12.7 gave me a message of success after only one "sector" of the whole thing went green. but the phone rebooted to an error message. did I do something wrong? help??
Click to expand...
Click to collapse
Sorry not an expert, but I read several times here to use Price COmsy ODIN and I use that one. Please try

OTA Update is not working after changing to U firmware.
I had stock T Mobile last firwmare installed, but I was sick of poor battery and lag
so installed this firmware https://forum.xda-developers.com/tmobile-s7-edge/how-to/6-8-t-mobile-935u-firmware-qe2-t3619151, full wipe.
Now I have worst battery performance. 12% draining overnight (6 hours) without touching the phone at all. It shows a new update but it fails when I OTA update. looks like the update it's being installed but fails at the end. Don't know what's wrong but totally hate battery.
Edit: Android pay is also not working..

pierre3408 said:
I Flashed an AT&T S7 Edge with T-Mobile firmware and:
1) Status remains unmodified
2) Android pay works (as well as Samsung pay)
3) I've already got 2 T-Mobile pushed firmware updates that installed without any issues.
Don't know if this helps, but I'd think it would be the same going from T-Mobile to AT&T.
I did also have to use a modified version of "ODIN" and flash a "PIT" file because T-Mobile has a different partition than AT&T.
Click to expand...
Click to collapse
What pit file did you flash? Did you flash the the pit file Odin pulls from your phone? Did you flash an att specific pit file?

ATT Stock Oreo Firmware

Hi Everyone,
Can anyone point me to a download link for the stock AT&T Oreo firmware for the s7 edge. I found a few but the AP file is coming up as a zip. Even after I rename it to follow the meta.md5 filename odin gives an error which states something about binary mismatch. I dont really want to go back to the unlocked firmware because I will loose the stock ATT& features.
Thanks for the help!
Justin

jbizub5192 said:
Hi Everyone,
Can anyone point me to a download link for the stock AT&T Oreo firmware for the s7 edge. I found a few but the AP file is coming up as a zip. Even after I rename it to follow the meta.md5 filename odin gives an error which states something about binary mismatch. I dont really want to go back to the unlocked firmware because I will loose the stock ATT& features.
Thanks for the help!
Justin
Click to expand...
Click to collapse
It's not just a name it's an extension you can't just rename it.
Use the samfirm app from xda for a better download rate.
Put it on automatic and decrypt download.
Model SM-G935U
ATT as region code for att firmware.
When you click check update it should say this
G935UUES4CRG3
That is that latest firmware for att.

Hi,
I did change the file extension as well not just a simple rename. Ok I will give that a try. I thought samfirm was discontinued? Also if i download the SM-G935U that is just going to be the unlocked firmware isnt it? Sorry still new at this.

depends though, if your model number on the back of your phone is sm-g935a or sm-g935u
att has 2 different phones
both have att branding and wifi calling volte and apps
as long as the firmware you install has the csc ATT then it should be fine.
if you have the 935a then you can download at the att sections of the forum.
Samfirm may be an old tool but it still works as intended
if u have the 935a just change it to SM-G935A in the samfirm app.

pingufanpoy said:
depends though, if your model number on the back of your phone is sm-g935a or sm-g935u
att has 2 different phones
both have att branding and wifi calling volte and apps
as long as the firmware you install has the csc ATT then it should be fine.
if you have the 935a then you can download at the att sections of the forum.
Samfirm may be an old tool but it still works as intended
if u have the 935a just change it to SM-G935A in the samfirm app.
Click to expand...
Click to collapse
Can't I just install a g935u firmware on a g935a phone?
I just don't want to keep AT&T apps.

[Q]Can Unlocked Phone Use Any Carrier Rom?

Hello, i am using ATT Galaxy S8 SM-G950U Unlocked Phone. When i am going to search any new update or firmware for my phone, i rarely find them even in sammobile I find most T mobile, verizon, sprint updates or firmware than ATT. So can i use other carrier rom for my device Or i have to stick with this ATT? Currently im using may 2018 firmware for my device. I searched a lot for newer firmware but couldnt get any. And can u tell me when the pie update will come for this device.
Also can i install pie beta on my phone? Bcoz its tells that it will work on snapdragon but doesnt tell att or t mobile or verizon...

ariyangd said:
Hello, i am using ATT Galaxy S8 SM-G950U Unlocked Phone. When i am going to search any new update or firmware for my phone, i rarely find them even in sammobile I find most T mobile, verizon, sprint updates or firmware than ATT. So can i use other carrier rom for my device Or i have to stick with this ATT? Currently im using may 2018 firmware for my device. I searched a lot for newer firmware but couldnt get any. And can u tell me when the pie update will come for this device.
Also can i install pie beta on my phone? Bcoz its tells that it will work on snapdragon but doesnt tell att or t mobile or verizon...
Click to expand...
Click to collapse
Al Us s8s are the same there are guids for carrier switching but all the recent formwares are on updato or sammobile. Should be able try try the pie beta. Im stuck on 7..0 since im rooted so no pie for I ???

TheMadScientist said:
Al Us s8s are the same there are guids for carrier switching but all the recent formwares are on updato or sammobile. Should be able try try the pie beta. Im stuck on 7..0 since im rooted so no pie for I ???
Click to expand...
Click to collapse
But in sam mobile and updato i find all carrier firmware except att. And thats worrying me much. I want to update but theres no att firmware. And if i use others firmware will i face any problem?

ariyangd said:
But in sam mobile and updato i find all carrier firmware except att. And thats worrying me much. I want to update but theres no att firmware. And if i use others firmware will i face any problem?
Click to expand...
Click to collapse
Other firmwares will work you might just be missing features like WiFi calling. I don't know the exact dialer code but they is a preconfig dialer code to select csc so once you got the latest you could try that. All the firnwares are identical for each us model you wont brick from flashing another carriers

So thats yes right? I can use other carrier rom without any problem?

please some one answer... my device is att s8 smg950u. so can i use smg950u1 firmware to flash 950u?

ariyangd said:
please some one answer... my device is att s8 smg950u. so can i use smg950u1 firmware to flash 950u?
Click to expand...
Click to collapse
As long as it's unlocked. A g950 u. U1 and w all can use any csc from carrier firmware. Pop your sim in and flash your carriers csc from firmware

My phone is G950U but it's made in China and works fine with Bulgarian SIM. I have no info about the original carrier. CSC code is TGY, can I flash G950U1 with CSC XAA (Unlocked)?

MrMef said:
My phone is G950U but it's made in China and works fine with Bulgarian SIM. I have no info about the original carrier. CSC code is TGY, can I flash G950U1 with CSC XAA (Unlocked)?
Click to expand...
Click to collapse
Did you read my previous post

TheMadScientist said:
Did you read my previous post
Click to expand...
Click to collapse
Yes, the thing is I don't have my carrier CSC available for download since I'm using it in Europe. Wondering if I need to revert flash how to source TGY (Hong Kong) factory rom? Seems all available for download are US-based CSCs only.
My main concern is OTA is currently failing completely, I am hoping to restore by moving away from the TGY code, does that need carrier switching process or just flash 950U1 on top including user data ?

MrMef said:
Yes, the thing is I don't have my carrier CSC available for download since I'm using it in Europe. Wondering if I need to revert flash how to source TGY (Hong Kong) factory rom? Seems all available for download are US-based CSCs only.
My main concern is OTA is currently failing completely, I am hoping to restore by moving away from the TGY code, does that need carrier switching process or just flash 950U1 on top including user data ?
Click to expand...
Click to collapse
Im pretty sure u1 model pretty much is csc-less i would try to flash the u1 firmware directly and flash the home csc in u1 firmware which should leave it open. BL" "AP" "CP" "CSC" is all you should flash. User data would add a carrier. If you dont it will leave it open.....
If updates are all your lookong for. Just use odin to manually update

TheMadScientist said:
Im pretty sure u1 model pretty much is csc-less i would try to flash the u1 firmware directly and flash the home csc in u1 firmware which should leave it open. BL" "AP" "CP" "CSC" is all you should flash. User data would add a carrier. If you dont it will leave it open.....
If updates are all your lookong for. Just use odin to manually update
Click to expand...
Click to collapse
I tried 950U XAS and 950U1 downloaded with SamFirm and all versions of Odin but all failed . Strange my S7 from Verizon is able to use OTA in Bulgaria but not this Hong Kong S8.

MrMef said:
I tried 950U XAS and 950U1 downloaded with SamFirm and all versions of Odin but all failed . Strange my S7 from Verizon is able to use OTA in Bulgaria but not this Hong Kong S8.
Click to expand...
Click to collapse
You are either using the wrong odin or a older firmware.
Or. To flash unlocked firmware you must first flash the combination file then unlocked firmware.

SM-G950U switch to Unlocked ROM?

I have a Sprint Galaxy s8, but I am no longer on Sprint.
Is it possible for me to flash the unlocked ROM, effectively making it SM-G950U1?
My current build nnumber: R16NW.G950USQU5CSA4
I'm hoping when it's available I can flash to the Pie version of G950U1.

lioncat55 said:
I have a Sprint Galaxy s8, but I am no longer on Sprint.
Is it possible for me to flash the unlocked ROM, effectively making it SM-G950U1?
My current build nnumber: R16NW.G950USQU5CSA4
I'm hoping when it's available I can flash to the Pie version of G950U1.
Click to expand...
Click to collapse
Only if Sprint unlocked the device through uicc unlock. If you flash u1 on a locked it's still stuck to the original carrier. As for guides there are several guides in the general section for carrier switching

lioncat55 said:
I have a Sprint Galaxy s8, but I am no longer on Sprint.
Is it possible for me to flash the unlocked ROM, effectively making it SM-G950U1?
My current build nnumber: R16NW.G950USQU5CSA4
I'm hoping when it's available I can flash to the Pie version of G950U1.
Click to expand...
Click to collapse
Yes it is. I just did it yesterday. I was on G950USQS5CSB1 and didn't get wifi calling or VoLTE on Mint Mobile but after flashing G950U1 I now have them.
Since you say you are no longer on Sprint I assume you just want the unbranded G950U1 firmware.
Using samfirm on your computer putin G950U1 as phone and XAA as CSC and search. You should get G950U1UES5CSB2. It is the latest and has the same bootloader as you. Download it.
Download and use the 3B modded version of Odin.
Back up your phone as it will be wiped.
study here how to use Odin..... there are many guides
Use the CSC file not Home_CSC.
Have the sim of your current carrier in the phone when you flash.

6shuter said:
Yes it is. I just did it yesterday. I was on G950USQS5CSB1 and didn't get wifi calling or VoLTE on Mint Mobile but after flashing G950U1 I now have them.
Since you say you are no longer on Sprint I assume you just want the unbranded G950U1 firmware.
Using samfirm on your computer putin G950U1 as phone and XAA as CSC and search. You should get G950U1UES5CSB2. It is the latest and has the same bootloader as you. Download it.
Download and use the 3B modded version of Odin.
Back up your phone as it will be wiped.
study here how to use Odin..... there are many guides
Use the CSC file not Home_CSC.
Have the sim of your current carrier in the phone when you flash.
Click to expand...
Click to collapse
This is exactly what I'm doing. Switched to Mint, but don't heav Wifi or VoLTE. Glad to hear that G950U1 works with both those (was worried I would have to flash TMO to get it).
Thanks again!

How can my S8 factory unlocked phone be model # SM-G950U instead of SM-G950U1?

Hello, I have a Samsung S8 that I bought unlocked at Best Buy 2 years ago in USA. It was with android 7.0 at that time.
I can't receive updates automatically now because I flashed it with ODIN last year to get Android 8.0 before the carrier that I use was ready to offer it. So the updates won't be automatic anymore.
So my phone is an unlocked one and I tought that the model # was supposed to be SM-G950U1 when it's factory unlocked but mine is SM-G950U. How can that be possible? I looked at my phone specs and my CSC is still XAA so it's really unlocked. I want to install Andoid Pie manually and I don't know what firmware to use on SAMmobile to flash it to android P because none of the files for the SM-G950U is with CSC XAA. Only SM-G950U1 have XAA firmare available. I don't want to lock my phone to a particular carrier.
Another thing I tried to update my phone: I used a series of firmware updates available at firmware.science. The problem is that the last update I did was from G950USQU4CRE9 to G950USQU5CRG1. If I want to continue the chain of updates, the next available step is from G950USQU5CRG3 so I'm blocked because I'm at G950USQU5CRG1. What can I do to go further in my update process?
Ultimately I want to be able to automatically update my phone to android Pie.
Thanks!

Pocket_Frank said:
So my phone is an unlocked one and I tought that the model # was supposed to be SM-G950U1 when it's factory unlocked but mine is SM-G950U. How can that be possible? I looked at my phone specs and my CSC is still XAA so it's really unlocked. I want to install Andoid Pie manually and I don't know what firmware to use on SAMmobile to flash it to android P because none of the files for the SM-G950U is with CSC XAA. Only SM-G950U1 have XAA firmare available. I don't want to lock my phone to a particular carrier.
Thanks!
Click to expand...
Click to collapse
You can use SamFirm, SamMobile or Updato to download SM-G950U firmware G950USQU5DSC1. (Don't download G950USQS5CSB1 which is for Sprint or Verizon.) That firmware file includes all CSCs for US carriers and the one that gets used depends on the sales code in your phone, which is XAA in this case. Flash that firmware in Odin and you should be fine.
Oh, and I am 100% sure that the G950U firmware includes the XAA CSC... It's installed on my phone right now!

Hai Karate said:
You can use SamFirm, SamMobile or Updato to download SM-G950U firmware G950USQU5DSC1. (Don't download G950USQS5CSB1 which is for Sprint or Verizon.) That firmware file includes all CSCs for US carriers and the one that gets used depends on the sales code in your phone, which is XAA in this case. Flash that firmware in Odin and you should be fine.
Oh, and I am 100% sure that the G950U firmware includes the XAA CSC... It's installed on my phone right now!
Click to expand...
Click to collapse
Thanks for the quick answer!
I looked on updato and the link for the update doesn't work. On SAMmobile I see 7 different countries/carriers for the file G950USQU5DSC1 for the SM-G950U. Which one should I get? None of the is XAA.
Thanks!

Pocket_Frank said:
I looked on updato and the link for the update doesn't work. On SAMmobile I see 7 different countries/carriers for the file G950USQU5DSC1 for the SM-G950U. Which one should I get? None of the is XAA.
Click to expand...
Click to collapse
It shouldn't matter. Choose the T-Mobile one (TMB) and you should be fine.

Hai Karate said:
It shouldn't matter. Choose the T-Mobile one (TMB) and you should be fine.
Click to expand...
Click to collapse
Ok, I'll try that one. Thanks!

Hai Karate said:
It shouldn't matter. Choose the T-Mobile one (TMB) and you should be fine.
Click to expand...
Click to collapse
It worked perfectly. Thanks!

I am currently on G950U and CRE9 (same specs as you have) could you please help me to get on Android P on my phone well i am not from US. A step by step guide is appreciated because i am a noob in this matter. Waiting for the reply

AfraSyabAhMad said:
I am currently on G950U and CRE9 (same specs as you have) could you please help me to get on Android P on my phone well i am not from US. A step by step guide is appreciated because i am a noob in this matter. Waiting for the reply
Click to expand...
Click to collapse
Hello, all I did was to choose the right firmware on SAMmobile (https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/TMB/download/G950USQU5DSC1/264390/), download it and follow each step to update with ODIN like you can see by searching on Google "How to Install Samsung Galaxy S8/S8+ Android Pie (One UI) Update".
I'm not in US even if I bought my phone in the US and it works in Canada with any carrier with the firmware from T-mobile. That is all I can tell you about how to choose the right firmware.