Database Users

Xiaomi Redmi 3S Lineage 28May Issue

Hello.
So i've flashed Lineage 28May Build and this automaticly encrypt my device ...
I've read on the internet that if the device is encrypted the flash process is a bit diferent.
I've read about wipe data cache dalvik and system
wipe data cache dalvik system and internal storage
And flash adb ...
So, now i tried to go to TWRP and it just apears Mi Logo!
Not booting into any recovery (Stock or TWRP)
I've installed Miui.eu and the recovery is ok
I flash Lineage and i can't boot into recovery anymore ...
What to do?
Issues :
1 - Can't boot into TWRP
2 - What process is to flash a new Lineage Rom? ( I want to decrypt my device to flash more easily)
I really need help ...
I don't know if my bootloader is unlocked or locked right now, because i flashed too many roms ...
Need help !

metro20 said:
Hello.
So i've flashed Lineage 28May Build and this automaticly encrypt my device ...
I've read on the internet that if the device is encrypted the flash process is a bit diferent.
I've read about wipe data cache dalvik and system
wipe data cache dalvik system and internal storage
And flash adb ...
So, now i tried to go to TWRP and it just apears Mi Logo!
Not booting into any recovery (Stock or TWRP)
I've installed Miui.eu and the recovery is ok
I flash Lineage and i can't boot into recovery anymore ...
What to do?
Issues :
1 - Can't boot into TWRP
2 - What process is to flash a new Lineage Rom? ( I want to decrypt my device to flash more easily)
I really need help ...
I don't know if my bootloader is unlocked or locked right now, because i flashed too many roms ...
Need help !
Click to expand...
Click to collapse
1)Try to reflash twrp from fastboot mode.(if you can't do this, then your bootloader is locked. And no matter how many roms you install, bootloader, once unlocked remains unlocked, untill you lock purposefully).
2)In twrp wipe cache, dalvik, and if necessary data for clean installation.
3) Once any custom ROM is installed, while in mi logo , you cannot directly boot to twrp. You have to go to fastboot and from there boot to twrp.
4) First install only ROM. Once it gets installed turn it on. Once it successfully turns on, then you can install gapps ( this is not always necessary to be followed)
5) formatting data completely will decrypt your device. Just goto format data and type "yes". You need not goto advanced wipe.

arceuss said:
1)Try to reflash twrp from fastboot mode.(if you can't do this, then your bootloader is locked. And no matter how many roms you install, bootloader, once unlocked remains unlocked, untill you lock purposefully).
2)In twrp wipe cache, dalvik, and if necessary data for clean installation.
3) Once any custom ROM is installed, while in mi logo , you cannot directly boot to twrp. You have to go to fastboot and from there boot to twrp.
4) First install only ROM. Once it gets installed turn it on. Once it successfully turns on, then you can install gapps ( this is not always necessary to be followed)
5) formatting data completely will decrypt your device. Just goto format data and type "yes". You need not goto advanced wipe.
Click to expand...
Click to collapse
Hello again.
Now i can boot to recovery...
So, now i only need to wipe data cache Dalvik system and internal storage, right?
I tried to boot on twrp and it sais unable to mount storage , but then, twrp automaticly make a few changes and finnaly boot sucessfuly into twrp... Is it OK?
Thx for your support mate
Sent from my Redmi 3S using Tapatalk

How can I install Oxygen OS 5.0.1 with an unlocked bootloader?

Good day!
Our country just received the Oxygen OS 5.0.1 update.
How can I install it with an unlocked bootloader?
I was going to relock it but I found out that if I did, my data will be gone.
The only difference in the set-up of my phone from a stock OP5 is the unlocked bootloader.

Flash through stock recovery

Hitman478™ said:
Flash through stock recovery
Click to expand...
Click to collapse
I haven't done this kind of thing yet.
If I do this, will my data be wiped out or not?

What about using the OTA notification ?

quick05 said:
What about using the OTA notification ?
Click to expand...
Click to collapse
What do you mean?
I tried to update my phone using the normal way but after downloading and tried to install it, it failed because my bootloader is unlocked.

I just made a backup of data using codeworkx recovery. Copied the backup (Along with the files on userdata I wanted to keep) to my PC.
Wiped all and formatted data. Then installed Oreo and copied back the files and data backup from the pc to the phone and restored data with codeworkx recovery again.
Then flashed magisk 15.2 and rebooted.
Everything working fine now.

shriekyphantom said:
Good day!
Our country just received the Oxygen OS 5.0.1 update.
How can I install it with an unlocked bootloader?
I was going to relock it but I found out that if I did, my data will be gone.
The only difference in the set-up of my phone from a stock OP5 is the unlocked bootloader.
Click to expand...
Click to collapse
I managed to flash Nougat without locking my bootloader. But I also had to Format the Data partition to make it work. I used Titanium Backup to backup the data of the Apps and Myapplist to make a list of the apps. After installing Oreo I only needed to spent 1 hour to restoring the app data.

pleomaxell said:
I managed to flash Nougat without locking my bootloader. But I also had to Format the Data partition to make it work. I used Titanium Backup to backup the data of the Apps and Myapplist to make a list of the apps. After installing Oreo I only needed to spent 1 hour to restoring the app data.
Click to expand...
Click to collapse
Hello, I'm interested in the same thing.. I have oxygen osv4.5.x received notice for is 5.0.1 and want to install. I have an unlocked bootloader and am also rooted w/magisk. I want to keep my unlocked bootloader and root after upgrading. I also want to do a "clean" install.
Can anyone provide detail instructions, including best back up method of data and links to any files needed (twrp, magisk, etc) thanks

jmoricone said:
Hello, I'm interested in the same thing.. I have oxygen osv4.5.x received notice for is 5.0.1 and want to install. I have an unlocked bootloader and am also rooted w/magisk. I want to keep my unlocked bootloader and root after upgrading. I also want to do a "clean" install.
Can anyone provide detail instructions, including best back up method of data and links to any files needed (twrp, magisk, etc) thanks
Click to expand...
Click to collapse
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.

pleomaxell said:
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Click to expand...
Click to collapse
Thank you... I like everything about my current build..should I wait to upgrade... Any other issues with Oreo?

jmoricone said:
Thank you... I like everything about my current build..should I wait to upgrade... Any other issues with Oreo?
Click to expand...
Click to collapse
I honestly dont see a big difference yet, but only had it for two days. Feels a bit snappier, my signal a bit stronger, and probably an improvement with battery life. I had issues upgrading but then again I flashed the wrong version of magisk. I think the most important thing is the latest android security update.

SysAdmNj said:
I honestly dont see a big difference yet, but only had it for two days. Feels a bit snappier, my signal a bit stronger, and probably an improvement with battery life. I had issues upgrading but then again I flashed the wrong version of magisk. I think the most important thing is the latest android security update.
Click to expand...
Click to collapse
Hey, thanks.. I will update later today. I see you provided which version of twrp (twrp-3.2.1-0-universal-codeworkx-cheeseburger.img). But what is the difference between the version you noted and the one I found (twrp-3.2.1-0-oreo-8.0-codeworkx-cheeseburger.img)
I want to make sure I have the correct version.
Thanks again

jmoricone said:
Hey, thanks.. I will update later today. I see you provided which version of twrp (twrp-3.2.1-0-universal-codeworkx-cheeseburger.img). But what is the difference between the version you noted and the one I found (twrp-3.2.1-0-oreo-8.0-codeworkx-cheeseburger.img)
I want to make sure I have the correct version.
Thanks again
Click to expand...
Click to collapse
You can ask that question on the TWRP thread. May be they can answer it correctly. I guessed that twrp-3.2.1-0-universal-codeworkx-cheeseburger.img was for both Nougat and Oreo and that is why I used it. So, if you want to be sure you should ask that on a TWRP thread.

pleomaxell said:
This is what I did:
Downloaded OnePlus5Oxygen_23_OTA_028_all_1801031502_04d7cc5. zip, twrp-3.2.1-0-universal-codeworkx-cheeseburger.img and Magisk-v15.3.zip.
Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP.
Rebooted to TWRP again to make sure that my TWRP was updated.
Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
This deleted my Internal Storage so I had to backup everything beforehand.
Then used advanced wipe to wipe Cache and Dalvik.
Mounted the internal storage by using the Mount option from TWRP main menu.
I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
Copied the OnePlus full update and Magisk zip file.
Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots.
Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
Booted into TWRP and flashed Magisk.
I am now on Oreo and I hate the way Ambient Display looks right now.
Click to expand...
Click to collapse
Hello, I was reviewing the process and just downloaded everything onto my computer and transferred onto my phone but have a few questions regarding some of the steps.
* Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP
** Can I update TWRP via the official app and is that version of TWRP okay to use over the "twrp-3.2.1-0-universal-codeworkx-cheeseburger.img"
* Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes' / This deleted my Internal Storage so I had to backup everything beforehand.
** How, what and where did you back up your data? Because later you mentioned "deleted my Internal Storage". I am guessing that because the OP5 does not have an external SD card everything is wiped and the new OS 5.0.1 needs to be saved onto a computer and then re-transferred back onto the phone. I am also guessing that the backup will need to be saved onto a computer as after wiping the phone it would also delete that file too, correct?
* Mounted the internal storage by using the Mount option from TWRP main menu.
** I am assuming that this option after the data wipe is self explanatory?
* I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
** This is what makes be believe all the files should be on a computer. How did you reboot and when you did, does it go directly / back to TWRP?
* Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots. / Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
** I am guessing here that once OS v8 is installed the TWRP img is no longer on the phone. I would need to transfer the TWRP back onto the phone then re-flash? Could I just install the TWRP official app and flash that way?
Thanks

jmoricone said:
Hello, I was reviewing the process and just downloaded everything onto my computer and transferred onto my phone but have a few questions regarding some of the steps.
* Rebooted to TWRP and installed the Codeworkx TWRP using the Install->Image option inside TWRP
** Can I update TWRP via the official app and is that version of TWRP okay to use over the "twrp-3.2.1-0-universal-codeworkx-cheeseburger.img"
* Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes' / This deleted my Internal Storage so I had to backup everything beforehand.
** How, what and where did you back up your data? Because later you mentioned "deleted my Internal Storage". I am guessing that because the OP5 does not have an external SD card everything is wiped and the new OS 5.0.1 needs to be saved onto a computer and then re-transferred back onto the phone. I am also guessing that the backup will need to be saved onto a computer as after wiping the phone it would also delete that file too, correct?
* Mounted the internal storage by using the Mount option from TWRP main menu.
** I am assuming that this option after the data wipe is self explanatory?
* I was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
** This is what makes be believe all the files should be on a computer. How did you reboot and when you did, does it go directly / back to TWRP?
* Installed the OnePlus full update and Wiped Cache and Dalvik and rebooted the device to make sure that the OS boots. / Then rebooted the device to fastboot to flash Codeworkx TWRP again because it was unavailable.
** I am guessing here that once OS v8 is installed the TWRP img is no longer on the phone. I would need to transfer the TWRP back onto the phone then re-flash? Could I just install the TWRP official app and flash that way?
Thanks
Click to expand...
Click to collapse
You have to flash TWRP by going to fastboot mode .
If you are rooted only then the TWRP app works

Aarju said:
You have to flash TWRP by going to fastboot mode .
If you are rooted only then the TWRP app works
Click to expand...
Click to collapse
Yes I am currently rooted. Once I flash the new OS will I still have root access to use the TWRP official app? Is that why after flashing new OS you need to flash TWRP via fastboot?
What about the backing up? I also have full titanium, thanks.

jmoricone said:
Yes I am currently rooted. Once I flash the new OS will I still have root access to use the TWRP official app? Is that why after flashing new OS you need to flash TWRP via fastboot?
What about the backing up? I also have full titanium, thanks.
Click to expand...
Click to collapse
After flashing the new rom you will be flashed stock recovery and you have to flash it through fastboot and flash magisk again.

Aarju said:
After flashing the new rom you will be flashed stock recovery and you have to flash it through fastboot and flash magisk again.
Click to expand...
Click to collapse
Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...

jmoricone said:
Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...
Click to expand...
Click to collapse
Wipe data and then copy the rom full zip flash it boot it to the starting screen then boot to recovery and then flash magisk ,you will see no errors.

Hello, I followed the following instructions:
4. Entered WIPE from TWRP main menu and used the 'Format' option to Format the Data and typed 'Yes'
6. Then used advanced wipe to wipe Cache and Dalvik.
7. Mounted the internal storage by using the Mount option from TWRP main menu.
8. I (also) was having problem copying files to the internal storage so I rebooted TWRP and the problem was fixed.
9. Copied the OnePlus full update and Magisk zip file.
I went to install the update w/in twrp and now I get an error message:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/oneplus5oxygen_23_OTA_028.....
What happened? Anyone please help...
I received the following tip
"Wipe data and then copy the rom full zip flash it boot it to the starting screen then boot to recovery and then flash magisk ,you will see no errors."
But this makes no sense to me.
I have formatted my phone / wiped data / have the full rom & magisk on my "/sdcard" / went to install zip via TWRP, selected the rom and received the error message.
I decided to just go and upgrade via OTA and that failed. My phone has rebooted back to stock
what am i doing wrong?

When I wipe up in TWRP on this phone my data becomes encrypted

Hey XDA. I have a question, I just got this phone and I was wondering how to flash properly? On my old phone I would just wipe everything in twrp and flash a new ROM, but when I wipe in twrp on this phone all my files get encrypted including the ROM that I'm trying to flash on this OP6T, any help would be appreciated

TheTrueDarkMist said:
Hey XDA. I have a question, I just got this phone and I was wondering how to flash properly? On my old phone I would just wipe everything in twrp and flash a new ROM, but when I wipe in twrp on this phone all my files get encrypted including the ROM that I'm trying to flash on this OP6T, any help would be appreciated
Click to expand...
Click to collapse
Can't help you with the root but searching does help. Search a guy on YouTube name techibee he had a good video. But one plus has a backup so if you mess up one boot partition you have the other to correct easier. Basically a backup so your phone boots and not bricks

TheTrueDarkMist said:
Hey XDA. I have a question, I just got this phone and I was wondering how to flash properly? On my old phone I would just wipe everything in twrp and flash a new ROM, but when I wipe in twrp on this phone all my files get encrypted including the ROM that I'm trying to flash on this OP6T, any help would be appreciated
Click to expand...
Click to collapse
Boot on twrp
Flash ROM
Flash twrp installer
Reboot to twrp
Factory reset ( DON'T wipe system)
Flash magisk
Reboot to system

Most custom roms dont work for me - Am i doing something wrong?

Hello! Since i got this device, every time i try to install any custom rom, sometimes i have a good luck and one of those works, but other times they dont, i just get an "Android Setup keeps failing" so i cant even do the initial setup. The only roms that worked for me for now are the PE BS and Corvus, i tried LOS, PE, Havoc and almost any other rom and i get this problem, tried roms with and without gapps, different gapps versions and build but i just keep getting this problem.
The way i install a rom its like this:
- Wipe dalvik, data, cache and system
- Format data
- Reboot recovery
- Flash latest fw
- Flash rom
- Reboot Recovery
- Flash magisk
And i just keep getting this issue :c skipping magisk but i just get the same problem. I dont know if someone have or had this problem and know how to solve it.
Thanks in advance!

Arthur King said:
Hello! Since i got this device, every time i try to install any custom rom, sometimes i have a good luck and one of those works, but other times they dont, i just get an "Android Setup keeps failing" so i cant even do the initial setup. The only roms that worked for me for now are the PE BS and Corvus, i tried LOS, PE, Havoc and almost any other rom and i get this problem, tried roms with and without gapps, different gapps versions and build but i just keep getting this problem.
The way i install a rom its like this:
- Wipe dalvik, data, cache and system
- Format data
- Reboot recovery
- Flash latest fw
- Flash rom
- Reboot Recovery
- Flash magisk
And i just keep getting this issue :c skipping magisk but i just get the same problem. I dont know if someone have or had this problem and know how to solve it.
Thanks in advance!
Click to expand...
Click to collapse
When you say "flash latest fw" what do you mean? Latest MIUI firmware? If yes why? You wipe everything just to install the firmware again?
It should be:
- Wipe dalvik, data, cache and system
- Format data
- Reboot to recovery (TWRP)
- Flash ROM
-Flash Gapps if wanted and not included in custom ROM
- Flash magisk
- Boot to system
Sent from my Mi 9T using XDA Labs

Wolfcity said:
When you say "flash latest fw" what do you mean? Latest MIUI firmware? If yes why? You wipe everything just to install the firmware again?
It should be:
- Wipe dalvik, data, cache and system
- Format data
- Reboot to recovery (TWRP)
- Flash ROM
-Flash Gapps if wanted and not included in custom ROM
- Flash magisk
- Boot to system
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Yeah thats what i mean, and i flash it everytime because those times that i skipped that the rom didnt even booted, so i just assumed that its necessary. But also, tried the way you say it and still got the same result.
I think that i need to flash MIUI by fastboot for something like a "clean flash" because y tried everything even using the zip to skip the encryption but... Nothing, still the same :c

Arthur King said:
Yeah thats what i mean, and i flash it everytime because those times that i skipped that the rom didnt even booted, so i just assumed that its necessary. But also, tried the way you say it and still got the same result.
I think that i need to flash MIUI by fastboot for something like a "clean flash" because y tried everything even using the zip to skip the encryption but... Nothing, still the same :c
Click to expand...
Click to collapse
Best should be to follow the instructions by the ROM developer,
for example Arrow OS:
How to install:
Reboot to recovery
Wipe System , Cache, ART Cache and Data
Flash the ROM
Flash any addons (GApps, Magisk...)
Format data if you are encrypted
Reboot
(Formatting data is later here)
Or Bliss ROM:
First Time Install / Clean Flash
0. Flash proper firmware, latest firmware for your device variants.
1. Reboot to Recovery
2. Format data
3. Wipe system
4. Flash the ROM (DO NOT WIPE VENDOR, EVER)
5. Reboot to System
6. Reboot to Recovery
7. Flash Magisk (Optional)
8. Reboot to System
Sent from my Mi 9T using XDA Labs

Wolfcity said:
Best should be to follow the instructions by the ROM developer,
for example Arrow OS:
How to install:
Reboot to recovery
Wipe System , Cache, ART Cache and Data
Flash the ROM
Flash any addons (GApps, Magisk...)
Format data if you are encrypted
Reboot
(Formatting data is later here)
Or Bliss ROM:
First Time Install / Clean Flash
0. Flash proper firmware, latest firmware for your device variants.
1. Reboot to Recovery
2. Format data
3. Wipe system
4. Flash the ROM (DO NOT WIPE VENDOR, EVER)
5. Reboot to System
6. Reboot to Recovery
7. Flash Magisk (Optional)
8. Reboot to System
Sent from my Mi 9T using XDA Labs
Click to expand...
Click to collapse
Yeah, i tried that too, like mixing steps, or changing when do i format data, skipping magisk and even on roms without gapps skipping gapps but still get the same results
I just dont know what to do

Arthur King said:
Yeah, i tried that too, like mixing steps, or changing when do i format data, skipping magisk and even on roms without gapps skipping gapps but still get the same results
I just dont know what to do
Click to expand...
Click to collapse
Best may be to ask a ROM developer by PM what could be the problem. I'm still on stock so my knowledge about it is more theoretical.
Sent from my Mi 9T using XDA Labs

edit : nvm wrong thread

Help!! Fastboot Bootloop RN7 - Pixel Experience Flash

Hello friends how are you? I will try to be very brief and excuse me for my English
I recently bought a second-hand redmi note 7, and it came with the ROM Pixel Experience 2019 (Android 10) ... The fact is that I wanted to install the updated ROM Pixel Experience (Android 11 2021) and did the procedure to install the Recovery Fox Orange (The phone came with the recovery from Xiaomi).
In doing so, I performed the WIPE (Dalvik, Cache, Data, System) and proceeded to install the ROM from internal memory.
The ROM was installed correctly but when restarting it enters a Bootloop in the FastBoot and I have not been able to start ...
It is in Fastboot bootloop ... Please I need help, what can I do to start the Pixel Experience or what are the steps to follow? I heartily appreciate your help

Format data. you will need to type "YES" when doing it!!
so, format data, wipe evertyhing again, reboot to recovery, then install your rom and then have fun. hope it helps.

papppsanyi said:
Format data. you will need to type "YES" when doing it!!
so, format data, wipe evertyhing again, reboot to recovery, then install your rom and then have fun. hope it helps.
Click to expand...
Click to collapse
Bro i just did it but it is still in FastBoot ... What I did exactly was the following:
- Enter OrangeFox
- I did Format Data
- Then I Wipe from: Dalvik / ART Cache, Cache, System, Data
- Then copy the ROM Pixel Experience Plus Lavender 11 (PC to Phone USB)
- I gave Install and then restart
But still in Fastboot Boot .. D:

Try latest global stable firmware.
Had this problem with other rom and it was FW related

matthias1976 said:
Try latest global stable firmware.
Had this problem with other rom and it was FW related
Click to expand...
Click to collapse
Resolved! I just had to install the ROM from Xiaomi.EU (which started correctly) and then I proceeded to reinstall the Pixel Experience and this time it worked perfectly: D Thank you both very much