I am on a 6T and am trying to install LineageOS with Open Gapps Pico v9.0 arm64. But the Open Gapps will not install, giving an error that the arm64 Architecture is wrong. This is not correct, the arm64 is the correct architecture. I have checked with this:
Code:
adb shell getprop ro.product.cpu.abi
which shows this
Code:
arm64-v8a
Where can I get the correct one? I prefer the pico for the MINIMAL Google presence on my phone.
I have also tried MindTheGapps 9.0 arm64 but that complains the signature is not correct, and does not install
So ai can install LineageOS using the adb sideload <lineageOS.zip> method, but then not get Play Store to install a few apps.
I have also tried the rather long winded way in this post and have the same problem.
Can anyone give me a working method to Install LiknmeageOS 16 with Gapps Pico.
I have got Lineage to accept the open gapps by repeatedly installing it and TWRP and booting into recovery 3 times, leaving the Gapps until last before doing a proper boot.
However now I just get the logo, and no OS, then it returns to the TWRP recovery.
I am not new to this, this is the 5th device I have used for LineageOS, but never had this bother before.
Any ideas?
Related
I decided that I would go from zadmix7 to cm13 and cm13 flashes successfully but opengapps gives error Wrong architecture to set-up OpenGApps' pre-installed busybox. Why?
awsomjgp said:
I decided that I would go from zadmix7 to cm13 and cm13 flashes successfully but opengapps gives error Wrong architecture to set-up OpenGApps' pre-installed busybox. Why?
Click to expand...
Click to collapse
NVM i have realized my mistake. i downloaded x86_64 instead of arm64. Whoops. Kids always check your architecture before downloading.
SOLVED! correct specs were elusive. Generally, specs for Moto E2 are ARM64, but this GSM model is 32 bit. I had the wrong GAPPS file, needed ARM, not ARM64
Moto E XT1505 otus.
Please bear with me, I am an utter noob, the learning curve is steep. This is my first time modding a phone at all.
I've just spent the last few days learning how to unlock bootloader, install TWRP and ROM, now can not install GAPPS.
ROM is lineage-14.1-20181126-nightly-otus-signed.zip from: https://download.lineageos.org/otus
TWRP versions downloaded here: https://forum.xda-developers.com/devdb/project/?id=9288#downloads
GAPPS version-ARM64 7.1 pico from here: https://opengapps.org
Sequence of what I have done:
-Unlocked bootloader
-Installed twrp-3.2.3-r1
-Installed lineageOS ROM
-Error 64 trying to install GAPPS pico.
-I booted phone to system anyway, lineageOS is working
-I searched error 64 and the only thing I found was to try earlier TWRP version 3.0.2
-Tried twrp-3.0.2-r5, same error 64
-Tried twrp 3.0.2-r1 , got error 20.
Please help! THX!
Disclaimer
Your warranty is now void.
I am not responsible for any bricked devices.
After some trial and error. I finally got microg running on LOS 17.1 or Android 10/Q. Tested on J700H (should work on J700F, etc. except for T which I assume has different properties)
The installation is quite tricky for some bug reasons (Traditionally Installing Microg will result into, no app notifications.)
So for the people who want to install Microg in their LOS ROM make sure to follow this guide.
For people who doesn't know about MicroG
https://www.reddit.com/r/MicroG/comments/9jceaj
Before we start, there is also this https://lineage.microg.org/. Which gives you preloaded MicroG ROM but the problem is, the ROM itself isn't that updated (Last updated 2-2-2021)
But the good thing is, you only have to flash it with TWRP and voila. You got MicroG and LOS, just a little bit older.
For people who wants to have the latest nightly Lineage OS 17.1 and at the same time having microg follow these steps carefully.
Requirements:
Lineage OS 17.1 https://download.lineage.microg.org/j7elte/ (Download the latest Nightly Zip only, forget the recovery zip)
Working TWRP (if you dont have any https://forum.xda-developers.com/t/...y-amp-amp-amp-root-samsung-galaxy-j7.3203632/) Please be careful
Apply this guide, but change the TWRP file to the latest one here https://dl.twrp.me/j7elte/
Magisk https://github.com/topjohnwu/Magisk/releases/download/v21.2/Magisk-v21.2.zip
MicroG GMS Core https://github.com/microg/GmsCore/r...7.204714/com.google.android.gms-204714034.apk
^^^^^
It's important to download this version else your notifications wont work
File downloaded must be "com.google.android.gms-204714034.apk" DOUBLE CHECK!
For some reason, the latest MicroG automatically closes it's device registration upon exiting the app, thereby disabling Cloud Messaging as a result. Which means notifications wont even show up.
MicroG GSF Proxy https://microg.org/fdroid/repo/com.google.android.gsf-8.apk
OpenGapps [arm, android 10, pico zip] https://opengapps.org/ (But I thought it was microg? Yup this is only temporary but part of the procedure)
Lucky Patcher or anything that can uninstall system apps (I recommend lucky patcher since it doesn't require any play services to run. If you try to uninstall google play services with an app that relies on play services it will crash)
Latest Bootloader, make sure to flash the latest bootloader using odin before proceeding to install LOS otherwise it wont work.
Check sammobile for the latest firmware
NEVER SKIP REBOOT. Else you're just making things complicated.
Go to settings > Tap Build Number 7 times > Developer Options > enable OEM unlock
Reboot to TWRP recovery and Full Wipe (Data, Cache, Dalvik, System)
Install Lineage OS 17.1 (Dont boot to system yet)
Install Magisk Zip
Install Gapps Pico Zip
Boot to System
Run Magisk, just press okay when it tries to update the app on startup. Check if Magisk is Installed: 21.1 (No need to Update App or Magisk if those numbers are shown, if it's N/A then update it)
If magisk asks you to reboot then do it (Especially if you updated it)
On the magisk app, click the puzzle icon on the bottom right. This is the magisk module, now search for Riru, download & Install (after installation dont reboot yet)
Next look for the Riru - EdXposed module (Then reboot)
I'm not sure of this one but check if EdExposed app is present on your homescreen then proceed, if not then search for EdExposed Manager apk, download & install.
If you're doing things right, upon opening EdExposed Manager, framework should be active. If not then retrace your steps
On EdExposed Manager, swipe right, then click download, search for FakeGApps and install. (You need to activate the module then reboot)
Install Lucky Patcher and grant root. Uninstall Google Play Services and Google Services Framework using lucky patcher (Things will start force closing which means it's working, reboot your device)
Install MicroG GMS Core (Make sure you download the file I listed above or else notifications wont work)
Install MicroG GSF
Open MicroG Settings on Homescreen, do a self-check. See if everything is checked, tap to grant it permission. (If system spoofs signature is unchecked, retrace your steps from no. 13)
Restart your phone (do not skip this step)
Open MicroG Settings, turn on Google Device Registration & Cloud Messaging
Restart your phone again (do not skip this step!! notification wont still work at this point)
Install Push Notification Tester on playstore to test
Have a cup of coffee and congratulate yourself. You now have MicroG on Lineage OS 17.1
Long term note: For example if an app notification doesnt work. Check MicroG settings > Cloud Messaging.
If the app doesn't appear there (also if the app exists way before you installed MicroG) you may have to reinstall that app to be able to get notifications
Purpose of this guide: Installing these kind of things are now difficult since Android 10. So many bugs and stuffs not working that's why I created this guide to at least contribute a little.
I'm thankful for the people who Lineage OS, made my phone so smooth.
Credits:
MicroG - https://microg.org/
LineageOS - https://lineageos.org/
Magisk - https://github.com/topjohnwu/
TWRP - https://twrp.me/
Video proof that MicroG works. GCM Notification Test via Discord https://streamable.com/d9f1qy
Hi I have firstly upgraded the official firmware on a Shield Android TV 2015 (Foster) to version 11 Android TV OS then i decided I hate it so I flashed twrp worrked fine got Lineage 17.1 Android 10 on it now but I add Gapps from open Gapps versions ARM x64 nano or pico it doesn't matter which I add if you add any Gapps then it won't boot into the Lineage OS it just sits in a seemingly semi-brick state only ever providing the boot animation circles only it never passes although the system is working to pickup adb otherwise it would be a full brick.
Can someone help literally point out what I need to do to get it working with play store please.
My assumption is it requires a custom Gapps not regular Gapps as is the case with some os's sometimes but i cannot find links to try for anything other than stock Gapps.
Have you installed GApps before initial boot ?
Hello,
It took me some time but I finally did it. I upgraded from Stock to LIneageOS latest version (Android 12L).
It took me some time because I think there was a problem during installation. Each time I installed, Google Play could not connect to wifi.
I followed the officila guide from Lineage : https://wiki.lineageos.org/devices/fajita/install
I suggest you do the same.
After the installation - here is the trick - you need to start and run Lineage OS on your phone.
Then reboot the phone to recovery (press Power + Volume Down during boot for 5 seconds)
Do a Reset of the data - This is the second trick and not explained in the official guide.
Go back to the ADB SIDELOAD and install the latest MindTheGapps : https://wiki.lineageos.org/gapps
Restart and run lineageOS and check that everything is fine.
Now go back to recovery mode and you can install Magisk. https://github.com/topjohnwu/Magisk
(Tip: You can rename the APK to ZIP to install it).
Problem : Safety Net is not passing. I tried everything (installing the safetynet-fix and the MagiskHidePropsConf. No Success! :-(
Good luck
OK. I gave up on the original LineageOS for Android 12.
I installed https://forum.xda-developers.com/t/...-6t-gapps-ota-updates-safetynet-twrp.4494053/
like you would install the default Lineage OS.
Then I booted and it was passing the SafetyNet which is normal as it is not rooted.
TWRP becomes the new bootloader. I
After that I booted back in TWRP tADB SIDELOAD to load the latest Magisk.
I booted and was hiding Magisk and activated Zygisk. I also Enforce deny List and Configure it to Google Play and Google Wallet.
After a reboot it still passes SafetyNet.
SUCCESS!
I just noted that because google recognize the phone as a NEXUS. Surelly because the SAFETY NET is spoofed by the ROM. Not sure of the implications of that!