Hi everyone.
I have a device (https://es.aliexpress.com/item/32911415845.html?spm=a219c.12010612.8148356.5.2a2aebeaOYrP6U) installed in my car running practically well except for a problem with radar warning applications that I can't hit sort out . I will describe the problem below:
When I listen to the radio, although the warnings of the radar application appear on the screen, the audio corresponding to that warning is not heard at all. However, if I listen to any other audio source, such as from an SD, from bluetooth or even from internet radio (TuneIn or others) the warning sounds of the radars are heard perfectly, and if I put the radio back on already I don't hear any until I turn it off.
I tried to download the radar applications (Radardroid and others) on the device to eliminate that it could be a problem on my mobile but nothing is solved. The same happens from the mobile, whether Android Auto is connected to the car screen or not, even when I want to share music from the mobile and in the music player of the phone I give it to share and if the car is active the Radio does not allow me to send anything.
It is as if the radio had preference over any other incoming sound, and curiously, only the audio of the radio is attenuated with the browser.
I think this behavior is quite strange and I don't know if it is due to a bad installation by the workshop or a device defect.
I don't know if someone has happened to him and if he could solve it.
Thanks in advance
Related
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its speaker works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
CJSnet said:
I hope someone is able to help me.
Okay I have the Wizard, upgraded to Wizard Mobile 6.
Shortly after, all my bluetooth devices (car kit, headset...) had their microphones die. In other words nobody could hear me when speaking through any kind of bluetooth.
I then flashed the Radio ROM to a different version, and bluetooth was repaired. But now the problem has returned for no reason.
Why does my Wizard's bluetooth audio in keep failing, yet its output works fine and I can hear other people?
Is there a recommended update to the Bluetooth Stack I can try?
Click to expand...
Click to collapse
I do have exactly the same problem. After flashing XDA Mobile 6 Release 3, microphone has worked for couple of days, and then suddenly died. Interesting, microphone is working with Notes but not with phone. I went back to
XDA Mobile 6 Release 2 for some other reasons (read: 2MB more free memory for critical application) but the problem with Bluetooth microphone remains. Radio is 2.25. Any advice?
--
Pogo
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is sometimes temporarily resolved for a short time. It always comes back though
I have been asked to join this thread. Per a PM:
We love the ROM you have provided, and are very thankful, however it was not until installing it that this issue arose. It does not seem fair to leave a number of people with a phone that is unusable for 'phone calls'.
Click to expand...
Click to collapse
(Bolding added by me)
I don't know what to tell you. If the rom doesn't work for you, then don't use it... Don't tell me its "not fair". I use MS Voice Command, and XM6r3 and have never seen this issue with my Bluetooth headset (Jawbone). I've also tested this out with a Plantronics Explorer 210 headset that I have and it has not problems with XM6r3 either. My A2DP headset (Spider) also works fine on XM6r3 with MS VC. I've stated this in the past when people have said they have BT issues on my rom. Sorry, but I can't reproduce it, so its hard for me to fix something that isn't broken for me.
Try this... Do a hardreset on your device (take a backup first if you want), then leave it as the base rom with NOTHING extra added. Run that way for a few days (how ever long it has taken before) and see if the problem happens again. If it doesn't then its not my rom but something being added to it (probably screwing with the registry someplace). If it does happen, then as I've stated before, I've seen a number of BT devices be flakey on WM6 (especially car kits). Try a different rom then. If someone with the problem can pin it down, I'll be happy to do what it takes to fix this issue if its something in the rom that is causing it.
Thanks mfrazz. What wasn't fair was not the bug, but that you had not responded to previous mentions of it, i.e. not fair to leave us with it. We love the ROM and put a lot of our life in your hands in a way, as we rely on our device so much for work and play. Hope you understand.
Now then, I have already tried a hard reset and the problem never occurs, until WM6 is put back on. Sure, 'use another ROM' is all very well, but we love yours - again, hope you appreciate the sentiment. If you're in a relationship, are you the kind of guy who tells a girl who loves you, 'find another boyfriend', or do you try to make it work
SO, I am wondering if this is related to the glitch you mention where sometimes when switching out of vibrate mode, the ring tone becomes muted. For that, your solution is to play the ringtone again, then it becomes unmuted.
Similarly, our Bluetooth devices mic's are being muted, and if we mute then unmute them again, then they become unmuted. A link that helps point you in the right direction?
Please note, this is not certain bluetooth devices being 'flaky', this is ALL devices. 4 at the latest count, including rock solid Nokia CARK7W car kits and Jabra headsets.
Some people put it down to MS Voice Command, which I have never installed. What does that program do, do you know, to cause the bug? Again I hope that might help point you in the right direction.
Please don't dump us Let's try to fix what is wrong in this relationship
BT problem solved?
CJSnet - not sure if you have resolved this. I was having the same problem and noticed people with reTouched dialer were not, so I loaded that dialer and the problems went away. I am using a Plantronics Voyager 510. Seems the problem might be with the standard dialer.
Hope this helps
CJSnet said:
There are also at least 3 people at the Wizard Mobile 6 thread with the same issue. Very surprised none of the experts here have been able to propose a fix. Makes the phone virtually worthless if you can't use it in the car etc.
As a workaround, I have found if you mute then unmute the phone volume, the issue is temporarily resolved for a short time. It always comes back though
Click to expand...
Click to collapse
Thanks, I'll give that a try. However WM6 has pretty much finished the Wizard for me, and I'm hoping to get a TyTN II soon as a replacement. Shame.
Good morning fellow forum member. I've recently begun having some significant bluetooth connectivity issues with my continuum and Ford Sync system in my 2011 Fiesta. Now, before you start ranting about your loath for microsoft or Ford please hear me out. In theory, the Sync system, combined with bluetooth technology, is a great way to go hands free. It also allows for the coordination of the system and Pandora & Stitcher Radio on an Android phone.
Anyway, lately my bluetooth connection to my car has been causing FCs on my phone. They are the type of FCs that cause the "long-short-short-short" haptic feedback but doesn't throw a pop-up message describing the cause of the FC. So, when the feedback occurs the phone will sometimes lock up but it always disconnects the bluetooth. I don't use bluetooth in any other fashion so I can't be positive that it's not an issue with the car's bluettoth system.
With all of that said, is there an inherent issue with the bluetooth system on our phone? If so, is there a fix for this? I'm currently running the EC07-clean_new ROM. This was installed over the SCH-I400-EC07-FROYO-REL-PRODUCTION ROM. My broadband version iss:i400.0.6v.EC06, Kernel 2.6.32.9 and build SCH-I400.EC07.
Any help that you brilliant folks could offer would be much appreciated.
Thanks,
Ray
I run bluetooth constantly (it's the only way I talk on my phone, driving or not.) I've never run into this issue. Have you recently downloaded any new apps? I found that there are some apps that simply don't play well with our phones. Especially radio based apps (I.E. the issues a lot of us were having with gps based apps, or gps losing it's lock, after a while. Wireless tether 3.06 beta completely screwed my phone up... etc). The only other thing I could suggest is to drop your phone from the sync, and reconnect it... I do this with all my bluetooth devices at least twice a week as a matter of course. And if you want to experiment to see if it's sync or your phone, assuming you have bluetooth stack on your computer, you could connect it to your phone. Other than that, maybe find a friend that has bluetooth and connect it?
Thanks for the suggestions. The most recent app I have installed that uses a radio is the new Stitcher, though I have been having some issues with "My Tracks" FCing but I think that is another issue. Anyway, prior to your reply I found an app on the market called "bluetooth fix repair" It's free and I gave it a shot. I've also deleted the phone from my car's list and repaired them. So far so good. I have a bluetooth stereo headset I'll have to try. I probably have too many apps to begin with. I'll see about deleting some of the ones I don't really need.
Thanks again,
Ray
Reborn627 said:
Thanks for the suggestions. The most recent app I have installed that uses a radio is the new Stitcher, though I have been having some issues with "My Tracks" FCing but I think that is another issue. Anyway, prior to your reply I found an app on the market called "bluetooth fix repair" It's free and I gave it a shot. I've also deleted the phone from my car's list and repaired them. So far so good. I have a bluetooth stereo headset I'll have to try. I probably have too many apps to begin with. I'll see about deleting some of the ones I don't really need.
Thanks again,
Ray
Click to expand...
Click to collapse
I think you should be good with rourine disconnect/reconnect. Asfor too many apps, the only thing rhat matters there is storage space. Android wint let you run "too many" at once. Itll delete from ram as needed. I was just saying that certain apps dont seem to play well with others. But that is an android issue, not your phone in particular.
I'm not here for a long time. I'm here for a good time. To hell with the red wine. Pour me some moonshine. - King George
I'm totally stumped here. Yesterday I decided to reflash my phone. I figured any issues might be ironed out. It must be an app issue, although it is going to be a PIA to uninstall then reinstall each app and test the BT after each app install. I thought that it might be the trailblazer101 car cradle, desk cradle or the sticher apps that were giving me the problem but that doesn't seem to be the case. Maybe I'll try replacing the BT files with the ones from eclair to see if I end up with the same trouble. Any idea if that might cause more problems? Are the BT files android version specific?
Peace
EDIT: I've not swapped the BT files from eclair but I did spend an hour or so listening to Stitcher radio via a bluetooth headset. It doesn't seem to be a BT issue. More likely an issue with the connection to the Sync system itself. Connecting via bluetooth is no problem in the car. It's not until I attempt to engage a function other than the phone that an issue occurs. I may try to reflash the EC07-clean ROM and see if there was something with the EC07-Clean_new version that I've been running for the last few weeks.
OK, the BT issue seems to be corrected. I flashed adrenalyn's EC07-clean ROM and that seemed to do it. Something must have gotten corrupted. So, issue resolved...i guess.
Hello!
I have a problem with delayed and cut off notifications over my bluetooth hands free device (Parrot MKi 9200). I can experience it on almost every ROM despite ROMs with Tytung's kernels.
Everytime my copilot live 8 says something like "In 500 meters turn left" it takes a little while (maybe one second) for the phone to establish the bluetooth connection to my handsfree device and all i can hear is "..eters turn left". The only ROMs without this issue are those using Tytyng's kernels. They work just perfect. And yes, I know the workarounds like letting the phone play music all the time, but this doesn't work for me, for i listen a lot to the radio or use the SD Card in my Parrot for playing music - so this is not a solution for me.
I tried to find out more about this issue, but all i could figure out was, that this seems to be an android problem. Due to power saving issues Android would close the A2DP connection and reestablish it, once there is a signal comming up. Please correct me if I am wrong on this one.
However, since Tytung figured out, how to get this thing done right it must be also possible on other kernels and smartphones. Is there a way, maybe to change some settings or a working app or some kind of bluetooth drivers, to solve this issue on other ROMs or even other android phones?
Thank you in advance for your help
Don't know of any app, but just by playing blank.mp3 in music player could help you(it holds bluetooth audio connection-stays on all the time)
your sound cuts are because of low power bluetooth mode, try asking kernel dev to disable it?
I have the same problem and it would be nice to have a buffer application which buffers sounds for Bluetooth for a second and transmit them when the connection is active.
Sure it's an old thread... but has anyone tried this?
https://play.google.com/store/apps/details?id=com.turboled.enhancedtts
Should at least fix the problem for the navigation commands...
Thanks, will try it
OK,
So I'm trying to get some help regarding this issue. I will continue to try different ROM's and what not to see if it can be resolved. I'm simply at a loss to where the issue lies though, however as of today, every custom ROM has been giving me trouble. My plan for today is to flash a stock ROM via Odin and then if that works go for Imperium, however I'm hoping with your help I may be able to solve it on something like CM12 or what not because I prefer the flexibility of a proper custom ROM.
OK, so the issue I have:
I have a car head unit which has bluetooth built-in. Music plays fine through Bluetooth, no jitters or issues. However, when I try and call someone and I'm listening to the radio or something non-Bluetooth, the phone does not send the signal (?) to the head unit to switch to Bluetooth. This means the call will be made via the dialer app and while the audio IS being routed through the bluetooth channel, the head unit does not know about it because it hasn't received the signal to switch to Bluetooth. I can switch it manually to Bluetooth and make and receive calls, but this isn't convenient at all and probably quite dangerous when I'm driving a car. The same applies when receiving a call.
Here's the thing, if I go into Bluetooth, select CAR KIT and go configuration, if I disable Media Audio, then it works fine! The phone correctly sends the signal to switch to Bluetooth and the head unit does so. The call goes through and it all works fine. This is repeatable.
Therefore, the issue I'm having lies in the fact both Media and Phone Audio are enabled at the same time. Has anyone else had this issue and does anyone have a suggestion to fix it?
Before someone suggests "just disable media audio". My answer is no, this isn't convenient at all. I use Bluetooth media quite a lot, and simply disabling and re-enabling it everytime simply isn't an option.
So far, I've had this issue on:
CM12.1 Optimized
CM12.1 Nightly
Mokee ROM
DirtyUnicorns
CM12 Nightly
I'm yet to try a stock Lollipop ROM. I know for a fact however, that stock KitKat DOES work.
I really could do with some help here, so any suggestions would be awesome.
all the roms you have tried are aosp....aosp is not designed for the s4 as its not an officially supported device (its not a nexus) so things like bluetooth and the camera will always be broken as the required stuff needed is proprietary to samsung
go back to stock and your problem will be solved
DSA said:
all the roms you have tried are aosp....aosp is not designed for the s4 as its not an officially supported device (its not a nexus) so things like bluetooth and the camera will always be broken as the required stuff needed is proprietary to samsung
go back to stock and your problem will be solved
Click to expand...
Click to collapse
The Bluetooth itself is fine. Audio quality is fine. Call quality is fine. It just seems like a tiny little thing that's causing all these issues for me, because if it could trigger my car head unit to switch, I wouldn't even dream of stock. Also the camera seems fine to be fair?
I'm not keen on going back to stock.... at all, so I'm thinking Imperium. It's a shame though because apart from this BT issue, CM12 is fantastic on this device. Takes a 2 year old phone and makes it feel like a brand new phone.
I really hope someone can fix that Bluetooth bug in CM12.1. I may even look myself, it must be something pretty small from a coding perspective because as I said, the functionality is clearly there as evidenced by the fact it works with Media audio turned off.
Regardless, thanks anyway
Changing the modem did not solve my problem.
When did you try the Optimized and the nightlies? There have been a lot of fixes lately regarding bluetooth.
I've used 3 different phones with my FM radio bluetooth receiver - a device I am forced to use, as my cars bluetooth is too old - it connects for phone calls, but wont connect to my phone to play audio files, hence why i use this device.
LG v20 - no problems. P10 Plus? Different story.
Mid-song over the bluetooth device, it suddenly de-syncs itself and the audio starts playing over the phones loud speaker. Completely unprompted. So I disconnect the bluetooth device inb my car, turn it back on....then it suddenly reconnects with the phone and continues playing the audio without interruption inside my car. This happens several times over a 30-45 minute period.
Bluetooth should just be bluetooth, right!? Can this be a quality control problem? An issue to do with unlocking the device or installing something like TWRP? This combined with the aweful features/stock apps of EMUI 5.1 is really destroying the experience for me. Anyone else had same or similar issues?
roosta said:
I've used 3 different phones with my FM radio bluetooth receiver - a device I am forced to use, as my cars bluetooth is too old - it connects for phone calls, but wont connect to my phone to play audio files, hence why i use this device.
LG v20 - no problems. P10 Plus? Different story.
Mid-song over the bluetooth device, it suddenly de-syncs itself and the audio starts playing over the phones loud speaker. Completely unprompted. So I disconnect the bluetooth device inb my car, turn it back on....then it suddenly reconnects with the phone and continues playing the audio without interruption inside my car. This happens several times over a 30-45 minute period.
Bluetooth should just be bluetooth, right!? Can this be a quality control problem? An issue to do with unlocking the device or installing something like TWRP? This combined with the aweful features/stock apps of EMUI 5.1 is really destroying the experience for me. Anyone else had same or similar issues?
Click to expand...
Click to collapse
I dont have this problem. Bluetooth is very strong and very stable. Try updating your phone firmware it might help
EMUI is very decent. If you dont like the layouts given, you are on android. So easy to slap on a different launcher.
Gezzaman8 said:
I dont have this problem. Bluetooth is very strong and very stable. Try updating your phone firmware it might help
EMUI is very decent. If you dont like the layouts given, you are on android. So easy to slap on a different launcher.
Click to expand...
Click to collapse
I'd argue that EMUI is one of the main things that stand in the way for more people to switch over to Huawei. That, and quality control. I possibly have a dodgy phone, its just this device I am using has not had problems with 2 other smartphones.
I will update the firmware to 151 (latest in my region) as soon as I know how to do it safely (boot unlock, TWRP and root installed - dont want to lose any)
RoOSTA
Similar Bluetooth problem with Huawei p10
I have similar problem with Huawei 10. Bluetooth connection doesn't work with my built in Media system. All other phone devices connect and work fine, but Huawei p10 doesn't work. I just posted my issue here on YouTube. You can find it by searching 'Huawei p10 Bluetooth problem'.
having same issue as yours. music wont play through bluetooth. :/
temp solution is delete cache in bluetooth share in APP and restart your device. but that only works for one time. if you want to connect another time, must do the same steps. I am sure it is a software bug
try powering the device off then hold volume up and power the phone on at the same time and keep holding volume up until you see a EMIUI recovery mode from there select Delete Cache data and when thats done click on Restart/Reboot the device then see if problem remains. I had todo this steps few times when google play store would hang on "Downloading..." status now and then, But when I got B170 firmware for my p10 plus it sorta fixed it and now installs properly.
P.S my issue is different but you never know, this might even fix the bluetooth issue. So it's worth a try.
Can someone please tell me how to connect to paired devices on my P2?
As stated, pairing works fine, but how do you actually make a paired device connect? I can't find any option in the EMUI!?