Head phone issues. - Samsung Galaxy Note 10+ Accessories

I have a Tmobile note 10+ non rooted android 10. I've been using the stock akg headphones and samsung head phone adapter with my bose headphones for a few months.
Today my phone would not recognize the adapter or the stock usbc headphone that came with the phone. It just plays sound from the speakers.
In the notification panel it keeps switching between usb connected and disconnected.
I plugged both pairs of headphones into my wife's s10+ and it works perfectly.
Any suggestions before I factory reset?

It might be the usb port, the otg adapter works? Also, you can check it by connecting your phone to a pc to see if both comunicate, if these tests fail, definitively the usb port is faulty

Check the USB-C port for pocket lint. It's very common for them to get packed with lint over time. This will prevent the USB-C cable/device from fully inserting.
If you have some in there just use something small soft and non-conductive like a tooth pick and some canned air to get it out.

Related

3.5mm USB Adapter - No Sound From Headphones

I recently picked up a set of earbuds and a 3.5mm adapter for my Tilt and have not been able to get the sound to play through the headphones... Is this a radio version issue? I'm a bit new to all this. I flashed my phone to the most recent ROM from HTC, installed the keyboard fix and that's about it. Any help would be appreciated.
Thanks!
JM
try flashing another radio...this is usually the culprit with no sounds...
I had this problem. When I plugged in the headphones, sound still came out of the phone speaker. It turned out one of the pins in the usb port was bent. If you get sound from the speaker with them plugged in, that could be your problem.
from my understandings...
There are 2 types of mini usb 3.5 mm headphone jacks. one that pulls form the top row on the mini usb port and one that pulls from the bottom row on the mini usb port. One works with the tilt, the other will not. More than likely you got the one that will not work with the tilt.
dtmcnamara said:
from my understandings...
There are 2 types of mini usb 3.5 mm headphone jacks. one that pulls form the top row on the mini usb port and one that pulls from the bottom row on the mini usb port. One works with the tilt, the other will not. More than likely you got the one that will not work with the tilt.
Click to expand...
Click to collapse
The sound comes through the external speaker just fine, I also tried ALL the radios and nothing helped. There are no bent contacts so I guess it is probably that I got the adapter that will not work with the tilt. Does anyone know of a specific manufacturer that makes one that does work with the tilt? I picked this one up off ebay for about .50 cents, no idea who makes it.
I had one adapter with gold plated on the 3.5mm headphone side, the connection to USB was bad. I had to hold it down for it to work properly. I have since bought another one (with L shape USB connector), it works perfectly. Either you need to juggle it to see if it's a connector issue or you simply got the wrong type of adapter.
What kind of adapter is it?
I bought a "OEM" adapter from a website selling Tilt accessories, and it works fine. However, when I picked up a Motorola headphone kit with a USB adapter, it did not work, and the sound would only come out of the speaker.
The Moto compatible adapters do not work. HTC specific adapters are fine. They are also available in 2.5mm if you want to use a cell headset with it instead of bluetooth.
The Kaiser requires an 11 pin usb adapter......I believe the Razr uses a 7 pin? if im correct. That is why you dont have sound....
A cheaper way, ie: FREE! is to make one yourself out of the cheap pair that came with the kaiser!
see this: http://www.tracyandmatt.co.uk/blogs/index.php/2006/08/18/orange_spv_m3100_headphone_adapter_hack
its for the TyTN 1, but it still works for the Kaiser, its also very fun and great to show off to people
I use a mini-USB adaptor (3.5 mm) from Boxwave and it works great with my Shure SE 110 earphones! The adaptor was around $12.00.
Internal Microphone
When I plug my heaphones in, it seems that the internal microphone (on the phone) is disabled.
Is it possible to hear the sound through the headphones and talk through the phone?
I hate having to unplug the headphones every time someone calls me.

USB to 2.5mm Adapter not working

I decided that I wanted to use the USB to 2.5mm adapter that came with my device to connect my phone to the auxilarry jack in my car for music. When I hooke the adaper up the sound still comes from the device instead of the USB. Has anyone else had this problem.
Device info:
ROM 20273 from ppckitchen
Radio 2.42.40
Anyone else?
mine works freakin great
I may be dreaming, but I thought there was a problem with some roms and some adapters. Have you tried a different adapter?
No I just tried the one that came with my device. Evanbriggs which one do you use and what ROM are you running?
Edit: I see it in your signature. NM.
Does any sound come through at all? Do you get any sound when you wiggle the 2.5 mm Jack. Mine is kind of funny - I can't stick mine in all the way - if I do I only get mono sound rather then stereo - I have to push my jack in only a little more than half way to get stereo sound. All the way in results in mono - to far past half way results in no audio - Too little results in no audio. I suspected faulty adapter and never did test with another adapter though because I got tired of all of the wires anyway and just went with the Motorole T505 bluetooth and FM Stereo transmitter instead.
I get full stereo. Works like a champ with Resco Raido. i use a 2.5 -3.5 converter so i can use it in my truck.
I have not been able to get mine to function at all. I have tried wiggling, half way out, hlaf way in (lol). I cannot get it to funtion at all. I guess I will have to buy a diffrent one and try it. I was hoping to get some some Kitchen users to confirm which brand works.
I did this post about 6 months or so ago
Hi all, I looked at this and did fix it for the after market adapters a few months back. I have the same problem as you with the stock adapter and a 3.5mm adapter in it just too much of a pain to get it just right to work, the after market USB to 3.5 worked on stock ROM and then had issues with the DCD ROMs but not his fault as it was an issue with the 6.1 audio drivers, fixed by a simple wire snip in the adapter itself. If you do not get the audio to mute on the device when you plug in the USB then the line that grounds in the connector to do the mute and switch operation is not doing it's thing, suspect the adapter or connector in the phone. It is an 11 pin connector and quite complicated, so get an after market 3.5 to USB, find my post 6 months or so ago and isolate it to adapter or titan.
i had the same problem
my inline usb remote stop working for about 2 weeks..in fact the usb port just stopped working completly
my mogul wasnt being detected by the compute either but it would still charge
i thought i was a broken port but wen i boot into the bootloader while it's still connected it magically gets recognised by the computer
driver issues?
anyway activesync and the remote started workin again a few days ago...
but I know it will stop working again
stock usb to 2.5 never worked -rom prob?
My stock adapter has never worked. I bought an aftermarket usb to 3.5 and a set of headphones built with a usb plug and neither of those worked either. Still using DCD 3.12 from May. Is this a known problem with that rom?[/I]
Count me in!
And I thought I alone had these problems.
A week ago, I stopped receiving sound out of the left earpiece.
Two days ago, sound stopped coming out of the USB port altogether: It would continue coming out of the external speaker. Folks on the Metro gave me dirty looks as I tried this and that to restore the USB sound. I've tried two adapter cables (same brand, from eBay).
I have an XV6800 Verizon's OEM ROM (2.09)...but tons of software tweaks.
I may switch to BlueTooth. I have a pair of HP's BlueTooth stereo noise-canceling closed phones, for which I paid $100. But the on-off slide switch keeps turning ON in my commuting bag, and all I get is a depleted battery when I'm ready to listen.
I just tried on no2chemspre3 rom, I get audio out of the factory wired/2.5mm adapter. I have always had sound regardless of rom. I use the factory adapter and a stereo headset from my old ampd E816 (best phone in the world). I have never had a usb-3.5mm adapter or a usb-2.5mm-3.5mm combo to test though.
I am listening to some Dyslexic Speedreaders right now. Try a wired phone headset. Just to see if it would work for you.

Heads Up for Fuze miniUSB extension cable..

I can't seem to locate the thread I saw a while back regarding someone wanting an extension cable for the T.V. out USB dongle for a Fuze.
I also wanted to port into my car's radio (touchscreen w/audio & video in/out jacks) and also supply power without having a tangle of wires. The t.v. dongle has a power-in jack on the side but that would result in a mess and I, apparently not alone, was looking for an 11 pin miniUSB extension cable. Seems nobody can find such an animal. However, during a trip to WalMart I found a car charger adaptor for Motorola phones with a 90 degree plug and a coiled cord. Not quite as neat as an extension would have been but with the jack arranged to point down the side of the dongle, the coiled portion can wrap around the dongle's cable. $15 and the search was over.
Heelo beav12
I was probably the one looking for the cable. I have my Fuze in a cradle in my car and I have the HTC A/V cable plugged into the bottom of the cradle so when I slide my fuze into it, I get connection to my Avic-D3 and I can see whatever the fuze sees on the Avic screen. However, in order to keep the phone charged, I have to plug in another cable into the jack on the little junction box and now I have 2 cables and an ugly box hanging below my phone.
I have searched high and low for an 11 pin mini USB extension cable to no avail and the 2 different styles of A/V cables for the phone either have the junction box 2-3 inches from the end where it plugs into the phone (which is what I have now) or if the junction is at the other end of the cable by the RCA plugs, it lacks the charging port! HOW F$#@$%ing dumb are these engineers??? All I want to do is hide the mess behind the dash and have just ONE SINGLE CABLE running up to the phone cradle.
If anyone has any ideas before I start cutting and soldering, please let me know!
Thanks for such a GREAT site here and hopefully someone will come up with a solution besides cut and burn!
Good day to all!
ITAdmin

Note 4 (ENYOS) Aux LineIN problem

I have a Note 4 the Enyos octa core.
Today I tried to experiment by hooking it with a AUX cable to the computer, to see if it works and connect it in the car's radio afterwards.
For my best surprise, I am hooking it into the PC, TV, Creative surround e.g. noting works. When I plug they JBL J33s they work fine.
It's like the phone is not recognizing the aux cable, though it's a standard 3.5mm aux audio cable, there is nothing special about it.
I looks like this: http://s474818768.onlinehome.us/list/Aux Cable/002.jpg
There is enough clearance, as it clicks perfectly as the earphones do, the only thing that differ is the lack of audio.
I checked the cable with multi meter and everything is fine ground/left/right
I hooked the cable to an oscilloscope, but there is no signal present.
Do you guys have any clue why this happens ??
dvd_video said:
I have a Note 4 the Enyos octa core.
Today I tried to experiment by hooking it with a AUX cable to the computer, to see if it works and connect it in the car's radio afterwards.
For my best surprise, I am hooking it into the PC, TV, Creative surround e.g. noting works. When I plug they JBL J33s they work fine.
It's like the phone is not recognizing the aux cable, though it's a standard 3.5mm aux audio cable, there is nothing special about it.
I looks like this: http://s474818768.onlinehome.us/list/Aux Cable/002.jpg
There is enough clearance, as it clicks perfectly as the earphones do, the only thing that differ is the lack of audio.
I checked the cable with multi meter and everything is fine ground/left/right
I hooked the cable to an oscilloscope, but there is no signal present.
Do you guys have any clue why this happens ??
Click to expand...
Click to collapse
replace the cable 3.5
Rajada said:
replace the cable 3.5
Click to expand...
Click to collapse
I checked it with my multimeter. All of the pins are not broken internally
Rajada said:
replace the cable 3.5
Click to expand...
Click to collapse
Turns out it was my audio system falt. They fixed it and not it works

USB-C Audio stopped working

Hey !
The phone randomly stopped recognizing my USB-C earphones, as well as the ones plugged with the 3.5mm to USB-C adapter.
I already did a full wipe, nothing changed, as well as switching select USB configuration to audio source
The earphones are xiaomi USB-C active noise canceling, and no power is sent to them, so they are fully not detected
What's weird is that the phone is still charging !
Phone is on RR 5.8.5, 7.1.2
Any idea ?
Thanks a lot !
Can you connect phone to computer?
Try your USB-C adapter in another phone, or try another USB-C adapter

Categories

Resources