Hello I just bought this device off eBay. Everything worked so I immediately charge the device rebooted to the bootloader AKA fastboot, OEM unlock the device, downloaded all the proper zips to install a custom rom and TWRP, flash TWRP, wipe system, data, cache, reboot to recovery, install the ROM, install SuperSU after removing lineage SU, install gapps, and rebooted the device. And it just hangs on the boot animation. Everything seems to have installed properly it just won't boot past the animation. Any assistance would be greatly appreciated I think this is an incredible tablet and I'm really eager to be able to use it.
Nevermind. I plugged it back in and when I got home I tried to boot it again and it worked. Not sure what went wrong though. So far everything is a-ok.
Just wanted to add...I was able to do everything I needed from my Amazon HD 10. Yes...I used an android device to unlock, root and flash another android device. I think these little things, are what made these old school android devices the best ones. Also wanted to add...such a shame Samsung doesn't make them like this anymore...or Google. TBH I am equally as happy with a stock ROM as I am with a custom ROM. Can't say that for many android devices anymore.
Related
Hi folks,
It appears that I managed to soft-brick my device, while trying to revert everything back to stock.
To make a long story short, I'm working by efrant's guide, but once I try to flash the radio, it takes ages and doesn't really go anywhere, i'm waiting more than 20 minutes now.
In addition to the bootloader (which is unlocked and the computer recognizes), I can also access the recovery (TWRP) - BUT, when I tried to wipe all the data, it wiped stuff and then claimed that there's no OS installed. when I rebooted my device, it got stuck on google's logo and I had to force reboot into bootloader again.
Luckily, the bootloader is the only thing that currently works in this phone, whilst the recovery keeps "claiming" that there is no OS installed and i can't really do something with it.
so i try to flash the bootloader, it works. once i try to flash the radio, it gets stuck. i try to flash system.img, the same.
What do I do?
A lot of thanks in advance!
*update* - I managed to flash it back to stock, eventually. yey.
just flash any ROM and Gapps and It should work.
Simply put, this is what happens when a rooting newbie discovers custom bootloaders and ROMs.
Current State:
A full stock ROM installed (no root) with the Skrillax V8 bootloader plopped on top of it. (which of course means the recovery-from-boot.p file still exists and that I don't have CWM.) The tablet will show the Acer logo then the Android logo and will give the appearance of booting. Then the icon flashes. It does this intermittently and forever.
What I want:
CM 10+ running with Skrillax and TWRP stably. I'd go with Flexreaper for next choice. Maybe I'll try to compile a KitKat version for it someday. Who knows.
How I managed to get my tablet in this crappy state:
Rooted tab a long while ago with a probably far outdated method.
Looked all over the internet later on how to unlock the bootloader and settled on the manual method in this excellent thread.
I flashed V8 and TWRP without a hitch using nvflash.
I wiped and installed Flexreaper.
I liked it but wanted a higher prize. I make a nandroid backup of it onto the external_sd and wiped and installed CM 10.1 from this thread.
This is where everything started going sour. It told me the install was invalid halfway. Disappointed, I wiped again and tried to restore my nandroid backup. It seemed to restore properly, but then Skrillax hung forever loading the kernel.
I wiped again and installed Flexreaper fresh. This time it booted. I downloaded the newest unofficial version of CM they mention on their wiki.
Booted to recovery and installed CM 10. It ran fine and I was impressed with the new OS. Then I noticed the apparent lack of Gapps.
I flashed the Gapps Jellybean package and rebooted. Skrillax hung.
Wiped everything I could fine in the TWRP menu and installed Flexreaper. Got past the primary kernel loading but the android icon would work for a bit then flash, starting all over again.
At this point I flashed several other recoveries, hoping it was my recovery. No such luck. I tried all of them included in V8.
Then finally, I downloaded full stock ICS and flashed it. I rebooted and noticed the same Android flashing thing.
Finally, I flashed V8 again, being the newbie I was, and then suddenly remembered while trying to boot to recovery that the Full install probably rewrote the recovery-from-boot.p.
And here I am.
Tl;dr version:
Went click-happy with ROMs, wiping, and recovery flashing until I was left with a stock OS that wouldn't boot with a Skrillax bootloader but no recovery.
The good news is, I still have cpuid+sbk, it still boots to APX (no idea how I didn't screw that up too.), and I have a nandroid backup on my external_sd which is probably untouched, since I was careful to not wipe it in TWRP.
Please help me fix this. I don't want an excuse to waste money on a flashy new Nexus or Asus Transformer tablet, I already have too many for my wallet's comfort.
I quess you renamed stock rom to update.zip and than flashed it? If you havent do it, put it on sd card and pres power+vol down (if nuttin happens than vol up). That shld trigger flashing proces
poslato sa elmag radija
uglyjohny said:
I quess you renamed stock rom to update.zip and than flashed it? If you havent do it, put it on sd card and pres power+vol down (if nuttin happens than vol up). That shld trigger flashing proces
poslato sa elmag radija
Click to expand...
Click to collapse
I don't have access to a micro sd card reader if the file must be placed on the micro SD card. I already have flashed the stock rom supposedly via TWRP, so I shouldn't have to flash it again, I wouldn't think. If I do, I guess I'll have to get a reader.
Yes. Micro sd. Rename it. You have guodes gere on xda. Im hoping it will help you.
poslato sa elmag radija
It didn't work. Still in same state as before.
I also have access to fastboot if that would help.
m27frogy said:
Simply put, this is what happens when a rooting newbie discovers custom bootloaders and ROMs.
Current State:
A full stock ROM installed (no root) with the Skrillax V8 bootloader plopped on top of it. (which of course means the recovery-from-boot.p file still exists and that I don't have CWM.) The tablet will show the Acer logo then the Android logo and will give the appearance of booting. Then the icon flashes. It does this intermittently and forever.
What I want:
CM 10+ running with Skrillax and TWRP stably. I'd go with Flexreaper for next choice. Maybe I'll try to compile a KitKat version for it someday. Who knows.
How I managed to get my tablet in this crappy state:
Rooted tab a long while ago with a probably far outdated method.
Looked all over the internet later on how to unlock the bootloader and settled on the manual method in this excellent thread.
I flashed V8 and TWRP without a hitch using nvflash.
I wiped and installed Flexreaper.
I liked it but wanted a higher prize. I make a nandroid backup of it onto the external_sd and wiped and installed CM 10.1 from this thread.
This is where everything started going sour. It told me the install was invalid halfway. Disappointed, I wiped again and tried to restore my nandroid backup. It seemed to restore properly, but then Skrillax hung forever loading the kernel.
I wiped again and installed Flexreaper fresh. This time it booted. I downloaded the newest unofficial version of CM they mention on their wiki.
Booted to recovery and installed CM 10. It ran fine and I was impressed with the new OS. Then I noticed the apparent lack of Gapps.
I flashed the Gapps Jellybean package and rebooted. Skrillax hung.
Wiped everything I could fine in the TWRP menu and installed Flexreaper. Got past the primary kernel loading but the android icon would work for a bit then flash, starting all over again.
At this point I flashed several other recoveries, hoping it was my recovery. No such luck. I tried all of them included in V8.
Then finally, I downloaded full stock ICS and flashed it. I rebooted and noticed the same Android flashing thing.
Finally, I flashed V8 again, being the newbie I was, and then suddenly remembered while trying to boot to recovery that the Full install probably rewrote the recovery-from-boot.p.
And here I am.
Tl;dr version:
Went click-happy with ROMs, wiping, and recovery flashing until I was left with a stock OS that wouldn't boot with a Skrillax bootloader but no recovery.
The good news is, I still have cpuid+sbk, it still boots to APX (no idea how I didn't screw that up too.), and I have a nandroid backup on my external_sd which is probably untouched, since I was careful to not wipe it in TWRP.
Please help me fix this. I don't want an excuse to waste money on a flashy new Nexus or Asus Transformer tablet, I already have too many for my wallet's comfort.
Click to expand...
Click to collapse
Babsector should still work - you would need t do a search for it
It seems to have worked properly, sort of. Flashing FLEXReaper results in an "Encryption failed." prompt at boot, which the button, of course, does not work. Wiping everything works except that the prompt notes "E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p4" Trying to reflash V8 with TWRP with the V8.bat file fails at format. More help?
My tablet is still displaying "Encryption failed", the button still doesn't work, and I still love my a500. Help?
Anyone?
I guess I'm screwed, then.
In the end, I think my data partition failed. Formatting or wiping data fails and when installing FlexReaper, it reports /data size as -1. Unless anyone knows how to fix flash memory, I think I'm stuck.
Hi guys, the times has come for me to open up my own account - I screwed up. I hope this is the right sub forum and apologize if it is not.
LG G2 Germany, formerly: TWRP recovery, Paranoid Android 5.1.1
Loved the rom but there were some issues like the screen turning off and on randomly, wouldn't accept pin right away, so I decided to go for CM 12.1.
Booted into recovery, factory wiped, tried to flash the .zip, but neither the rom nor the gapps would even begin to flash. It just said error.
Went crazy, tried some other CM versions, none of them worked. I've never had this issue before, when I flashed PA it all went just peachy.
Went even crazier and I can't really remember what I did in my panic spiral, but I somehow ended up with a soft-bricked phone. Managed to re-install the LG firmware .kdz, however, only the 4.2 one worked (4.4 gave me a bootloop.)
Now, getting this bad boy rooted and ready to flash custom roms is somewhat of a problem. I managed to get it into recovery though (after some issues with the recovery image), but flashing CM still won't work. Same error as before. I think there may be something wrong with the recovery image. I still had the image .apk from the first time I rooted my phone (also with 4.2) and it worked just fine so I figured I'd just use it again and do it like I did it last time. However, I am able to get into recovery mode. I've tried ClockworkMod and TWRP, but as a result of my panicking, it's just really a big ol' mess right now. I hope I've included all the info needed.
Please help, I'm actually lost.
Are you flashing the latest TWRP which is 2.8.7.1?
http://blastagator.ddns.net/twrp.html
Hey, thanks for replying. At the moment it only boots into recovery, unfortunately. ADB does not work, even after re-installing the usb drivers. My computer recognizes the device now though, but I can't get any files onto that thing at the moment.
Edit: It's not the latest TWRP
If you install the latest TWRP, you may be able to boot into TWRP and copy over a ROM to flash.
Hi friends! I really feel frustrated with this phone.
I began by using fastboot to flash TWRP (twrp-3.1.1-1-s2), used it to flash Lineageos 13.0, but IR BLASTER doesn't work, then I flashed 14.1 and IR blaster, Sim detection, flashlight and camera don't work correctly, I tried Resurrection remix and MIUI8 too but I gave up, neither of those Custom Roms works as I wanted them to.
So I went back to EUI and all was well until I wanted to update OTA, it gave me an error every time, tried to do it with update.zip but nothing, using stock recovery and nothing. I used TWRP and wipe everything again, now this thing won't start it just bootloops, I tried everything for two days and every time I use a stock ROM (5.8.020s) it gives me an error, or tells me it can't be read. When I factory reset and format everything it tells me I dont have an OS installed, so I'm completely lost I don't know what else to do and I can't return the phone because I'm overseas right now.
I really need to have it as when I got it the first time because at least it was functional but I just can't get it to work
I could really use some help right now :crying: thanks in advance guys!
Nikodominiko said:
Hi friends! I really feel frustrated with this phone.
I began by using fastboot to flash TWRP (twrp-3.1.1-1-s2), used it to flash Lineageos 13.0, but IR BLASTER doesn't work, then I flashed 14.1 and IR blaster, Sim detection, flashlight and camera don't work correctly, I tried Resurrection remix and MIUI8 too but I gave up, neither of those Custom Roms works as I wanted them to.
So I went back to EUI and all was well until I wanted to update OTA, it gave me an error every time, tried to do it with update.zip but nothing, using stock recovery and nothing. I used TWRP and wipe everything again, now this thing won't start it just bootloops, I tried everything for two days and every time I use a stock ROM (5.8.020s) it gives me an error, or tells me it can't be read. When I factory reset and format everything it tells me I dont have an OS installed, so I'm completely lost I don't know what else to do and I can't return the phone because I'm overseas right now.
I really need to have it as when I got it the first time because at least it was functional but I just can't get it to work
I could really use some help right now :crying: thanks in advance guys!
Click to expand...
Click to collapse
So I managed to fix the problem. When you root this phone or in fact just flash a custom recovery like TWRP, it changes the model of the phone, If you unroot the phone you won't be able to receive OTAs anymore even if you are on stock ROM, you'll always get an error at the end of the update even if you do it manually, if you are dumb like me and didn't make a backup of your stock system, you won't find any help on the internet more than to install a custom ROM and learn to live with the errors and bugs. I did not want that so to be able to get the phone to its factory state, what I did was this:
1. Download: stock recovery image for Le s3 x522 (official, you can find it anywhere), LeEco_X522_5.8.019S_OTA.zip, bootloader-20S-s2.zip, twrp_s3.img (the chinese TWRP recovery) and S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip
2. Save those zips to the root of the phone, obviously the .img files you are going to flash them through your PC
3. Put the phone in bootloader mode. command: fastboot flash recovery recovery.img (the official recovery)
4. fastboot boot twrp (the chinese one)
5. From this step what I did was pure luck
6. wipe cache and dalvik and install LeEco_X522_5.8.019S_OTA.zip
7. wipe cache and dalvik and install bootloader-20S-s2.zip
8. wipe cache and dalvik and install S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip
9. Reboot
How and Why did this worked I don't know, I am a noob but please try if you find yourself in the same situation as I was, you don't lose anything with trying, if this doesn't work don't blame me, this worked for my phone.
Greetings friends!
Thanks for putting this guide together, I am in a similar situation in that I reverted to stock everything (1. Installed YDSS chinese twrp, 2. Installed S2_X522-NA-OP-IFXNAOP5802012141S-5.8.020S.zip. This flash was supposed to have installed the stock recovery and overriden the ydss twrp, but didn't, I had to manually flash that after. Everything came back smooth but my updates also failed at recovery.
I am wondering where you got the LeEco_X522_5.8.019S_OTA.zip, bootloader-20S-s2.zip & twrp_s3.img from?
Nice to hear you finally got it to work ! Aren't the X520 and the X522 the same phone ? Why official ROMs are not compatible ?
Hey, I'm new here when it comes to writing forum posts, so bare with me.
I've had this tablet for a few years now and I had flashed it with one of Magendanz roms (Nexus Stock) and I wanted to change to the LineageOS rom he had. I downloaded the .zip file and copied it to my sdcard and tried to get into TWRP to flash it. I did restart to recovery in the OS and once it restarted, it's been doing a boot loop ever since. I have tried using Odin to flash the rom that way, but for some reason it'll keep doing a boot loop after it's done flashing and restart. I can try going back to the stock firmware if it's a final option to get this tablet working again, but I would love to see if I can get LineageOS to work.
DengekiMatsuko said:
I did restart to recovery in the OS and once it restarted, it's been doing a boot loop ever since.
Click to expand...
Click to collapse
I had a similar issue once. It turned out that after flashing, not all the partitions mounted properly.
Are you still using TWRP? Boot to recovery, and go into "Mount". Make sure the system and other partitions are actually ticked. That solved the problem for me, and I was able to successfully boot to the system.
Hopefully your issue is that simple!
I managed to brick my Tab A 10.1 (2019) last year by dirty flashing ROMs I shouldn't have. I properly munted it, I couldn't even get into recovery. But I could still get into download mode with a USB cable plugged in to my laptop (it needed to be plugged in for download mode to come up). I flashed the stock ROM, which made it bootable again, which then allowed me to re-flash TWRP and then Magendanz' LOS18.1 ROM.
If you completely break your tablet, reflashing the latest stock ROM for your region is a great way to get back to a familiar starting point. You can then follow people's guides online to get where you want to be.