Database Users

[Q] p1000oxajm6

i tried updating to this rom and it crash my tab.
i tried going back to the older ones but they fail at zImage.
any one else and this problem and got pass it? if so please let me know

bulldebeerman said:
i tried updating to this rom and it crash my tab.
i tried going back to the older ones but they fail at zImage.
any one else and this problem and got pass it? if so please let me know
Click to expand...
Click to collapse
You need to provide more details.
What firmware were you running previously?
Where did you download JMA from?
Did you partition and with which .pit file?

Thank rot i got it up and running again
Im not home now to see the Rom names but i was using the j5 Rom the one before the m6 so i tried updating to the m6 but it just keep booting back to the android man digging. So i tried going back to all the older Roms even the t-mobile Rom u posted nothing work just failed on all attempts. At one point it wouldn't even turn on unless u plug it in.
All Rom were from the c samfirm site
Sent from my GT-P1000 using XDA App

Tried flashing ROM and nothing

I followed [GUIDE] Installing a Rom/CWM recovery/Kernel/Root or going back to Stock for NEWBIES! Section 3 for an MTD. I want to put on the Vanilla Gingerbread ROM someone made. But when I did the Odin I got a fail.
My Fascinate is rooted and running Hardware version: I500.04, Firmware: 2.2.2, Kernel: 2.6.32.9, and build SCH-I500.ED05. I have CWMR 3.0.0.8 w/ ROM Manager v4.8.0.2.
I have tried everything I can think of and everything I could find in any forum especially this one and for the life of me can not get it to go. Any assistance is of great help. And if anyone is in the Fayetteville / Raleigh NC area that could offer me a actual hand in doing this would be of really great help.

jaed.43725 said:
I followed [GUIDE] Installing a Rom/CWM recovery/Kernel/Root or going back to Stock for NEWBIES! Section 3 for an MTD. I want to put on the Vanilla Gingerbread ROM someone made. But when I did the Odin I got a fail.
My Fascinate is rooted and running Hardware version: I500.04, Firmware: 2.2.2, Kernel: 2.6.32.9, and build SCH-I500.ED05. I have CWMR 3.0.0.8 w/ ROM Manager v4.8.0.2.
I have tried everything I can think of and everything I could find in any forum especially this one and for the life of me can not get it to go. Any assistance is of great help. And if anyone is in the Fayetteville / Raleigh NC area that could offer me a actual hand in doing this would be of really great help.
Click to expand...
Click to collapse
What failed in odin? going by what you posted, you didnt follow the guide. Also you need to use cwm4 fixed for cm7, not cwm3 which is exactly what the guide specifies.

Could me running Windows 7 64-Bit have anything to do with it not working?

jaed.43725 said:
Could me running Windows 7 64-Bit have anything to do with it not working?
Click to expand...
Click to collapse
64 bit windows should work if you have it set up correctly. I need more details on whats failing? Does the computer recognize the device?

Yes the computer does recognize the phone.

Feel free to ask any queations so I can give you any info you need.

jaed.43725 said:
Yes the computer does recognize the phone.
Click to expand...
Click to collapse
if your on a stock rom now. just odin cwm4, three finger into recovery wipe all three, then flash the vgb zip. basically follow the guide from steps 13 on.

What Odin version?
Sent from my SCH-I500 using xda premium

Odin3 v1.3
I may just have gotten it to work. It is taking awhile to load the new ROM however. I am not sure how long I should let it boot. Its been sitting on the SAMSUNG screen for about 5 min.

Three finger back into recovery and reflash. sometimes you have to flash twice to get mtd roms to take.

It worked. Thank you very much.

Your welcome!

I got it to work. But now it wont let me log into the market and gmail just does a flash thing and goes back to the apps screen.

Thats because u need to flash gapps...read the bottom of section 3 in the guide.

yep, did that and everything works great now. Thank you everyone.

TWRP Sources

Hi all,
I am new to the Axon 7 community and hopefully this isn't a silly question. I have not seen anything to really explain this - maybe its out there and I missed it.
I see many threads on getting a custom recovery loaded on the phone. In some of them, the TWRP image linked is from the TWRP site (twrp.me) and other times the NetHunter site (nethunter.com). Why would I use a TWRP image from NetHunter and not from TWRP themselves?
Thanks for setting me straight

user7743 said:
Hi all,
I am new to the Axon 7 community and hopefully this isn't a silly question. I have not seen anything to really explain this - maybe its out there and I missed it.
I see many threads on getting a custom recovery loaded on the phone. In some of them, the TWRP image linked is from the TWRP site (twrp.me) and other times the NetHunter site (nethunter.com). Why would I use a TWRP image from NetHunter and not from TWRP themselves?
Thanks for setting me straight
Click to expand...
Click to collapse
Use whichever you like, both work
Just be careful about the version, versions lower than 3.1.0 are dangerous and backing up stuff can wreck your phone

Does that mean it is just a case of someone else built the code then rather than being a modification to the code?

user7743 said:
Does that mean it is just a case of someone else built the code then rather than being a modification to the code?
Click to expand...
Click to collapse
Maybe it is a mirror... can't test but you could compare md5

Understood. I mostly wanted to understand if it was forked for one reason or another. It would appear not.

user7743 said:
Understood. I mostly wanted to understand if it was forked for one reason or another. It would appear not.
Click to expand...
Click to collapse
well there are more than one TWRP versions out there it seems. For example when you flash the universal bootloader TWRP displays 3.1.0-N while on stock 7.1 it shows 3 1.0-0

I've got a little issue myself, twrp installed via add 3.1.0.0 it works I've flashed roms and worked perfectly even though there's no official build for our A7 but yes everything works as it should. OK I backed up 3 backups the original rom and resurrection remix official and Tesla rom they all worked and flashed perfectly using twrp. But 2 of these backups will not restore it fails saying no partition selected but the original rom will back up no problem. And help guys this is the first time I've run into this. I've tried doing via the axon 7 tool also. Thanks in advance.

fastjohnson said:
I've got a little issue myself, twrp installed via add 3.1.0.0 it works I've flashed roms and worked perfectly even though there's no official build for our A7 but yes everything works as it should. OK I backed up 3 backups the original rom and resurrection remix official and Tesla rom they all worked and flashed perfectly using twrp. But 2 of these backups will not restore it fails saying no partition selected but the original rom will back up no problem. And help guys this is the first time I've run into this. I've tried doing via the axon 7 tool also. Thanks in advance.
Click to expand...
Click to collapse
The problem I think is data partition.
Every time I swich rom to oficial I have to format data, wipe dont work. Maybe before restore format data in f2fs or ext4 for oficial rom
Enviado desde mi ZTE A2017G mediante Tapatalk

May sound strange but it was because I flashed the ROM and gapps from my USB c style flash drive so I just decided to do the phone over fresh. It's working 100% all fresh install. Thanks for your help but no matter what I did it wasn't going to install those restores.

[SM-J327P ROM BASE] QI2 Firmware Deknoxed and Deodexed

Like I have mentioned to the others in the J3 Emerge community, I had this done just didn't have the opportunity to upload it until today. This is a Deknoxed and Deodexed base for custom ROMs for users who are currently on the QI2 stock firmware. And since I did nothing but remove the odexes(including the one on the boot img iirc which is why it comes up with the typical custom kernel message on bootup) and removed Knox, I'm not posting this as a DevDB thread as Samsung did all the heavy lifting so to speak.
[url]https://androidfilehost.com/?fid=745849072291691412[/URL]
And yes, this can be flashed as is but as always, you do so at your own risk. I will not replace your device and neither will Boost Mobile nor Samsung in the event of data loss, corruption, theft, fire, pod people, etc.
Please do not mirror this zip without express permission from me.

I believe this COULD be used on VMUS and SPRINT as well, but because I do not have the Emerge from those carriers. Also, from what I see it can only be rooted using SuperSU in Systemless mode or Magisk.

How can i get wifi working after flashing this?

evilgold said:
How can i get wifi working after flashing this?
Click to expand...
Click to collapse
If you're not on QI2 when you flash this, it won't work. No idea how to fix it unless you use the QI2 ODIN package to "upgrade" which is found on AFH under the user the_yankee, iirc. Not at pc so can't verify this. Have stuff to do rn so can't get on one.

SammaelAkuma said:
If you're not on QI2 when you flash this, it won't work. No idea how to fix it unless you use the QI2 ODIN package to "upgrade" which is found on AFH under the user the_yankee, iirc. Not at pc so can't verify this. Have stuff to do rn so can't get on one.
Click to expand...
Click to collapse
Thanks! that's exactly what i was missing, I guess i was using a different version before, flashing the QI2 first did the trick.

I think I will put together a set of zips that can be used to get any of the three we are all on,working on the various versions. All a user will need to do is pick their carrier and flash it in TWRP after first boot that way the system writes the csc directory. I will post you all a link when I get them built. They are sorely needed and long over due.
SammaelAkuma said:
I believe this COULD be used on VMUS and SPRINT as well, but because I do not have the Emerge from those carriers. Also, from what I see it can only be rooted using SuperSU in Systemless mode or Magisk.
Click to expand...
Click to collapse

help how to flash this zip??

help me understand please
please help me. i used the A|1 sprint Rom and soft bricked my phone and stuck in complete boot loop. it goes as far as recovery screen in TWRP and reboots. i have tried to download official Rom from your links through google drive but for whatever reason they wont download.
please help me i just need an official J327P ROM. Odin keeps getting stuck on "setup Connection"

worked for my sm-j320p boost thank you

bro, what part of the Q 12 stock did you flash in odin? im guessing the bootloader but it keeps failing on me and i'm just a bit confused on the stock Q12 i downloaded i got 5 slots last 2
look like sprint packages to me so hopefully someone can clue me in on which slots are needed to so my wifi will work please! thanks in advance
evilgold said:
Thanks! that's exactly what i was missing, I guess i was using a different version before, flashing the QI2 first did the trick.
Click to expand...
Click to collapse

is it possible to uninstall this rom?

H870 wont boot past recovery...

Hello,
I today went to install an update to the RR 8.1 ROM, however my G6 will no longer boot past TWRP - and I have no idea why.
I've formatted everything possible.. have tried to flash different ROMs and Kernels but the device simply will not boot correctly. It boots into Recovery every time and i'm confused as to why.
I'm currently out and about wont my mac so I can't flash a stock kdz until later when I get onto my Windows machine.
Is there anything I can do now?
TIA!

This is probably the 8th-9th thread about this issue. Please search. This is a common problem with linage based os OTA updates.
Research.

adaimespechip said:
Hello,
I today went to install an update to the RR 8.1 ROM, however my G6 will no longer boot past TWRP - and I have no idea why.
I've formatted everything possible.. have tried to flash different ROMs and Kernels but the device simply will not boot correctly. It boots into Recovery every time and i'm confused as to why.
I'm currently out and about wont my mac so I can't flash a stock kdz until later when I get onto my Windows machine.
Is there anything I can do now?
TIA!
Click to expand...
Click to collapse
You could try the solution posted Here
Good luck!

basicreece said:
This is probably the 8th-9th thread about this issue. Please search. This is a common problem with linage based os OTA updates.
Research.
Click to expand...
Click to collapse
Are you aware of how many random threads there are that relate to the G6 and the word 'recovery'? I didn't think of doing any research AT ALL. Thanks for your useful input.
Killua96 said:
You could try the solution posted Here
Good luck!
Click to expand...
Click to collapse
Thank you! I Didn't spot this, but unfortunately have returned to stock for now

adaimespechip said:
Are you aware of how many random threads there are that relate to the G6 and the word 'recovery'? I didn't think of doing any research AT ALL. Thanks for your useful input.
Thank you! I Didn't spot this, but unfortunately have returned to stock for now
Click to expand...
Click to collapse
You are very welcome, just next time please search before repeating yourself. So many other lazy ignorant people who cant be bothered to search or use their initiative that the forum gets filled up with the same rubbish.
If you need some help on how to use the search correctly let me know.