Hi all
I have a Oneplus 6T that I bought in Myanmar (Burma). I have since moved back to the UK and now the caller ID name doesn't show up, just the number. I've tried deleting and adding back the Google account, I've also factory wiped it. I don't have Trucaller.
I'm now thinking of installing the UK firmware. The phone still has a lot of Chinese crap anyway. Would the UK firmware work on a 6T bought in Myanmar?
Thanks in advance
Shaun
What UK firmware are you referring to? I am only aware of International firmware and T-Mobile US firmware.
If you are seeing a bunch of Chineese apps then I would certainly update to the international firmware. Should be pretty straight forward.
Could be hydrogen os
Thanks both of you.
It is Hydrogen firmware and as to UK firmware, that is probably the international version. My main experience of flashing firmware is on Samsungs, where they have different variants of hardware and hence firmware. I'm guessing this isn't the case with Oneplus, at least in terms of the hardware.
Related
Hello all,
So I'm tempted to buy a Tim-branded S8 on Amazon.it because it's crazy cheap currently. I'm not in Italy but from what I've gathered online (and confirmed by a review on the product's page on Amazon), branding in Italy doesn't mean sim-locking so it should be usable with my local carrier. I'm in Europe anyway.
The only major difference with an unlocked phone (since it doesn't seem to have any hardware trace of the carrier) will be the software : potential TIM-related bloatware, delays for updates, etc.
My question would be : could it be possible to flash an official "clean" image, without affecting the phone and its warranty ? If so, which reference should I use ?
Thank you very much !
Yes, was going to ask if it was also sim locked.?
What county are you in and what sim do you use?
Out the box, if sim unlocked, it will work anyway.
Unless you want any advanced features.
Fw wise it's not a problem. I went the other way though, flashing EE ( UK) firmware into an unbranded unlocked BTU version to get VoLTE to work. It caused no issues.
Belgium but I guess European models pretty much have all bands available across Europe...
Thanks for the feedback !
I have the tim s8 here in the UK, flashed the h3g firmware and have WiFi calling and volte functioning without issue.
Sent from my SM-G950F using Tapatalk
hi
Im also interested in buying a tim branded phone (https://www.amazon.it/gp/product/B071RSVYSH/ref=ox_sc_act_title_1?smid=A11IL2PNWYJU7H&psc=1) and was hoping if someone who has one could answer me couple of questions.
1) Does the phone have universal warranty? I mean if something was wrong with it and it needed any repair, could I just take it to a local Samsung store?
2) The model number on amazon site is G950, is that different from G950F? i couldn't find any reliable info on this..
Thanks in advance!
If the phone is designed for the European market then warranty applies regardless where you are (within Europe).
All European models are F-models.
You can flash an unbranded ROM through Odin to get rid of any branding which does not trigger Knox.
I'm moving to Germany from South America. Besides the fact that lastest version available here is still CRC7 (eye-roll) Would it be a good idea to flash German unlocked firmware, or is it exactly the same? (perhaps the modem is optimised for the local bands?)
"Past-switcher" here. I ended up flashing the German-version of the Oreo update when they were the first to get it. I didn't notice any difference with my UK-based S8 (Exynos).
I think unless you actually have any issues, i wouldn't bother flashing. Logically, if your phone supports the bands, it will work fine.
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Goronok said:
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Click to expand...
Click to collapse
I've heard this as well. If you want those features on a Samsung phone, it has to be at&t branded. I ordered an at&t phone from Samsung since I make good use of wifi calling. It works fine on my unlocked P3XL but no dice on the Samsungs.
I have the same phone and service and when I went to update my imei they told me it could not find the phone. So I was without lte/4g for a day until I gave them a imei to a s8 active. Now I have data at least
Darthshadow666 said:
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
Click to expand...
Click to collapse
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
So I have the same service provider software, on my unlocked s10+, however when I went into an ATT store and looked at a branded S10+
I noticed the service provider software version to be : SOAMC_SM-G975U1_OYM_ATT_PP_0033( thirty three at end),
so anyway to update the service provider version? does that come from the SIM ??
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
beethoven1854 said:
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
Click to expand...
Click to collapse
Where did you get the att firmware?
Sent from my SM-G975U using Tapatalk
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
jamgam said:
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
Click to expand...
Click to collapse
I followed this thread https://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697
At first like you I downloaded the wrong version and nothing changed. I finally flashed G975USQU1ASBA and now have VOLTE/WIFI Calling and of course all of the bloat. But at least those two functions are working. Make sure that you complete a clean flash when I did a dirty flash I had problems sticking on the loading screen.
I believe you just need to call in ATT to take care those carrier specific features .
Which firmware can I flash with Odin to my S10+ Xfinity Mobile unlocked to get AT&T OTA updates? Currently have ASF7 flashed from the latest unknown firmware uploaded to Sammobile. I flashed w/o USERDATA. I just want to be able to get future OTA updates as I just switched my carrier from Metro by T-Mobile to AT&T. I was using U1 US unlocked firmwares on my Note9 & S10+ but want to use carrier perks now with AT&T.
What's with AT&T being the only ones to not release update files? You would think they all would be required to release them. More AT&T customers need kick up a fuss about it.
Hi guys, need some advice on S10+.
I'm from an Asia country and last year I bought a new S10+ from a online seller which does grey imports for mobile phones, because I want a Snapdragon version over the Exynos, which is what most Asia countries get.
The Model number (SM-975U) and Baseband version (G975USQS3CTB6) are indicating this is a US variant but I can't tell which carrier it is because there is no carrier logo on the phone or when I turn on the phone, no bloatwares as well.
The only down side is this Baseband/carrier does not have updates since March 2020. I tried checking for updates but got nothing.
What I try to get:
1. Latest original firmware which will continue to update itself (hopefully)
2. No carrier bloatware
3. No need root or custom roms (Doesnt go well with banking apps)
I have experience rooting and flashing custom firmware on my previous Samsung Galaxy S7 Edge, but I can't remember if I have done unlocking bootloader before, lol.
Need advice on:
1. Which firmware should I choose?
2. I remember XDA forums used to have useful Guide under Sticky Threads but now I don't see it. I hope this guide will be able to help me with what I am trying to do.
3. I probably sound stupid here, is there any flashable settings file that is friendly to Asian region/telco? I am noticing a bit of network weakness on my phone, I hope its just me.
Thanks to anyone who reads this.
You've aquired the US Unlocked Snapdragon variant, it's not associated with any US carrier and it's not bootloader unlocked. Flashing updated FW is likely your best bet, it's available here.
Download Samsung Galaxy S10+ SM-G975U TMK USA (MetroPCS) G975USQS4FUA1 firmware
Fast download latest Samsung Galaxy S10+ firmware SM-G975U from USA (MetroPCS) with G975USQS4FUA1 and Android version 11
www.sammobile.com
The only other option for an update is Samsung's SmartSwitch. Whether or not it's compatible depends on your local service provider.
Hi. So, fist post, tried to search a similar, but didn't find any.
I bough t a 2nd hand S8 SM-G950U. I am in the Netherlands, it was cheap. This had a Verizon firmware but was already unlocked. I could live by hiding the Verizon apps, but I couldn't update and the security updat was from 2019.
I went through a tutorial and found a Sprint firmware that is from 2020, but if I try to update the software, it says the device is up-to-date. I have another, G950F S8 that still receives updates. I just guess it is looking for updates on the EU servers that don't have updates for the US firmware.
I read that I cannot flash it with the G950F firmware, because they have different architecture, so what are my options? Can I try the U1 firmwares?
Thx, M.