Database Users

TWRP Stuck after upgrade to Nougat

Hello everyone,
i just flashed the newest Pure Nexus Rom and everything went fine.
I forgot to flash the SuperSU Zip so i tried to got back into TWRP, but now it stuck.
The System boots normally, only TWRP wont boot.
Anyone had that problem too?

if anyone else has the same issue, here is the answer:
I forgot to erase the userdata or cache.
If you have the same problem use fastboot!
fastboot format cache
fastboot format userdata
Then it should work again.
(Everything on your own risk)

If you dont flah SuperSU asap, TWRP will not stick on reboot (w nougat). That was the issue.

No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.

kaufikauf said:
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
Click to expand...
Click to collapse
Exactly. It happened before you flashed SuperSU zip. Not flashing SuperSU caused your problem. It needs to be flashed the first time you go into TWRP or you won't be able to boot back into TWRP. The previous poster is correct.

Maybe we talk about different problems
Ive formatted cache and userdata yesterday,
now i can go back into twrp.
(SuperSU is not flashed now).
Just tried it, works perfectly!

kaufikauf said:
No SuperSU was not the problem.
It happened before i flashed the SuperSU zip.
As far as i know, there is a problem if you upgrade to Nougat and dont format the userdata and cache because of the encryption or sth like that.
Click to expand...
Click to collapse
I never, ever flash userdata, and never had an issue.
We can agree to disagree. Either the other poster and I arent understanding your question, or you arent understanding our reply. It's cool, it happens.
But TWRP not sticking is due to not running SuperSU at the end of the install process. It wont stick.

And now i know the misunderstanding!
My sentence was a little bit silly formulated:
It didnt stuck by flashing SuperSU. I just forgot to do that and when i recognized this, i want to boot into recovery. Then i recognized the bootloop.
So SuperSU as itself was not involved. By the way BeansTown wrote in the Thread for PureNexus Rom that you have to format your userdata (normally over TWRP).
Shame on me that i didnt read before start flashing

kaufikauf said:
And now i know the misunderstanding!
My sentence was a little bit silly formulated:
It didnt stuck by flashing SuperSU. I just forgot to do that and when i recognized this, i want to boot into recovery. Then i recognized the bootloop.
So SuperSU as itself was not involved. By the way BeansTown wrote in the Thread for PureNexus Rom that you have to format your userdata (normally over TWRP).
Shame on me that i didnt read before start flashing
Click to expand...
Click to collapse
You should take a look at this post in the official TWRP thread for a clearer reason why.

SlimSnoopOS said:
You should take a look at this post in the official TWRP thread for a clearer reason why.
Click to expand...
Click to collapse
So I followed the guide and updated to 7.1.1 and did the normal "fastboot flash recovery xxx" then "fastboot reboot bootlader" then rebooted it via phone I go to "Recovery" from my phone and I get a screen saying "No Command" I tried to flash twrp-3.0.3-0-angler.img
Did I miss something?

USFguy said:
So I followed the guide and updated to 7.1.1 and did the normal "fastboot flash recovery xxx" then "fastboot reboot bootlader" then rebooted it via phone I go to "Recovery" from my phone and I get a screen saying "No Command" I tried to flash twrp-3.0.3-0-angler.img
Did I miss something?
Click to expand...
Click to collapse
After flashing TWRP from the bootloader, go directly into recovery and flash SuperSU 2.78 or newer to make it stick permanently.
Sent from my Nexus 5X using Tapatalk

SlimSnoopOS said:
After flashing TWRP from the bootloader, go directly into recovery and flash SuperSU 2.78 or newer to make it stick permanently.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
It won't boot into recovery, I flash recovery, unplug device hit recovery boot and it boot loops once then boots normally....

USFguy said:
It won't boot into recovery, I flash recovery, unplug device hit recovery boot and it boot loops once then boots normally....
Click to expand...
Click to collapse
Hmm. If you are on stock, reflash the boot, system, recovery, and vendor from the factory image that matches your stock, security update. Restart the phone and boot into Android. Restart into the bootloader then fastboot flash recovery TWRP-angler.img. See if it lets you boot into TWRP then. If not, try an older version of TWRP and see if that will flash and allow you to boot into it.
Sent from my Nexus 5X using Tapatalk

SlimSnoopOS said:
Hmm. If you are on stock, reflash the boot, system, recovery, and vendor from the factory image that matches your stock, security update. Restart the phone and boot into Android. Restart into the bootloader then fastboot flash recovery TWRP-angler.img. See if it lets you boot into TWRP then. If not, try an older version of TWRP and see if that will flash and allow you to boot into it.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Tried that, ended up going down an update in TWRP and it worked, weird....

I had a similar issue and I had to go back in and reflash Recovery image to recovery partition and all was well

Mi A1 Bootloop please help

so I installed pie then i flash oreo back and after installing ota update my phone is in bootloop tries to flash many roms but no luck and i followed this tutorial https://forum.xda-developers.com/mi-a1/how-to/solution-bootloop-9-0-beta-t3876533 still no luck in the last step after flashing with mi flash still bootloop i dont even get android one logo please help me

Gattt said:
so I installed pie then i flash oreo back and after installing ota update my phone is in bootloop tries to flash many roms but no luck and i followed this tutorial https://forum.xda-developers.com/mi-a1/how-to/solution-bootloop-9-0-beta-t3876533 still no luck in the last step after flashing with mi flash still bootloop i dont even get android one logo please help me
Click to expand...
Click to collapse
my friend, you just go to fast boot mode and enter twrp through fastboot, do data cleaning, cache / delvik, system, internal memory, then from twrp, reboot Fastboot, after that you can flash rom stock cleanly from miflash tools.

DDPfisher said:
my friend, you just go to fast boot mode and enter twrp through fastboot, do data cleaning, cache / delvik, system, internal memory, then from twrp, reboot Fastboot, after that you can flash rom stock cleanly from miflash tools.
Click to expand...
Click to collapse
The problem is probably because of ARB, not because the partitions haven't been erased.

Mi 9T Hard Brick After MIUI11 Test

I seem to have hard bricked my 9T after flashing the MIUI 11 rom from xiaomi.eu. I think culprit is a totally botched/corrupted boot loader and I have no idea how it happened. I've tried reflashing back to stock through stock image .bat files, but no dice. It flashed everything but the device still refuses to boot past the MI screen. If I try to boot into TWRP, my device gets stuck at the TWRP splash screen, no matter which version it is. Does anyone know what I can do or try at this point? Thanks.

So do I, first time I successfully instal first beta v25 miui 11, and than when the v26 comes, stupidly, i flash it from twrp, it tells me that i succeed installing that zip, and than i wipe art and cache and reboot system, but what next i know, my phone brick, i can not instal anyrom, from mi flash tool, or from anywhere. I did everything and still can not fix the problem.
Anyway, you still can enterin TWRP UI, after waiting about 10 to 30 minutes, because after intalling that rom, automatically your data format change from ext4 to f2fs, and twrp will need a lot of time to read your disk.
But, even after doing anything in twrp, still can not make my phone successfully boot into system.
And theres moun I/O error everytime i tried to wipe everything, or fix disk, or change disk format. Everything... and i just dont know what to do anymore.
So may be you can wait patiently until you can entering twrp ui, and please lemme know if you know how to fix this problem

Soapy! said:
I seem to have hard bricked my 9T after flashing the MIUI 11 rom from xiaomi.eu. I think culprit is a totally botched/corrupted boot loader and I have no idea how it happened. I've tried reflashing back to stock through stock image .bat files, but no dice. It flashed everything but the device still refuses to boot past the MI screen. If I try to boot into TWRP, my device gets stuck at the TWRP splash screen, no matter which version it is. Does anyone know what I can do or try at this point? Thanks.
Click to expand...
Click to collapse
i have experience that, then i flash the twrp chinese version and it works.

@flamedrops which one if i may know? I tried 3.3.1-0916-redmi_k20-CN and still not work ?

Soapy! said:
I seem to have hard bricked my 9T after flashing the MIUI 11 rom from xiaomi.eu. I think culprit is a totally botched/corrupted boot loader and I have no idea how it happened. I've tried reflashing back to stock through stock image .bat files, but no dice. It flashed everything but the device still refuses to boot past the MI screen. If I try to boot into TWRP, my device gets stuck at the TWRP splash screen, no matter which version it is. Does anyone know what I can do or try at this point? Thanks.
Click to expand...
Click to collapse
I got exactly the same problem after installing miui 11rom. Installing firmware via fastboot was unsuccessful. God, help us ...
---------- Post added at 07:44 AM ---------- Previous post was at 07:33 AM ----------
Arif Ferdian said:
So do I, first time I successfully instal first beta v25 miui 11, and than when the v26 comes, stupidly, i flash it from twrp, it tells me that i succeed installing that zip, and than i wipe art and cache and reboot system, but what next i know, my phone brick, i can not instal anyrom, from mi flash tool, or from anywhere. I did everything and still can not fix the problem.
Anyway, you still can enterin TWRP UI, after waiting about 10 to 30 minutes, because after intalling that rom, automatically your data format change from ext4 to f2fs, and twrp will need a lot of time to read your disk.
But, even after doing anything in twrp, still can not make my phone successfully boot into system.
And theres moun I/O error everytime i tried to wipe everything, or fix disk, or change disk format. Everything... and i just dont know what to do anymore.
So may be you can wait patiently until you can entering twrp ui, and please lemme know if you know how to fix this problem
Click to expand...
Click to collapse
Just the exact same problem as mine. If you know anything about how to solve this problem, please tell us.

I had the same problem with a miui 10 weekly beta but unfortunately I wasn't able to fix it but lucky me my phone was still in a return period so I returned it back to Amazon and got my money back since then I have always stayed away from beta ROMs . I tried everything but it wasn't booting pass the mi logo as you said

flamedrops said:
i have experience that, then i flash the twrp chinese version and it works.
Click to expand...
Click to collapse
Benfatica said:
I had the same problem with a miui 10 weekly beta but unfortunately I wasn't able to fix it but lucky me my phone was still in a return period so I returned it back to Amazon and got my money back since then I have always stayed away from beta ROMs . I tried everything but it wasn't booting pass the mi logo as you said
Click to expand...
Click to collapse
Ahhhh yes, i was thinking to using my guaranteed card, as i still can relock bootliader with mi flash tools, already trying anything for couples day with zero result, and im giving up hahaha

Arif Ferdian said:
Ahhhh yes, i was thinking to using my guaranteed card, as i still can relock bootliader with mi flash tools, already trying anything for couples day with zero result, and im giving up hahaha
Click to expand...
Click to collapse
did you really reboot it using adb reboot twrp? and reboot system on twrp using twrp cn version?

Yap @flamedrops i already do, and even tried all the TWRP version that exist, and also reflash many Rom, from stock, eu, ct, aosp, miui 11 25, miui 11 26, i flash from adb sideload, from twrp via usb otg, via miflash tool,
I flash boot.img, etc
Still no result.
Already tried everything that i could thinking about

flamedrops said:
did you really reboot it using adb reboot twrp? and reboot system on twrp using twrp cn version?
Click to expand...
Click to collapse
This LR. TEAM is twrp cn version right? And in fact, this version hardly booting to twrp ui version after this problem, easier to entering twrp ui with the ugly themed greek version

Arif Ferdian said:
This LR. TEAM is twrp cn version right? And in fact, this version hardly booting to twrp ui version after this problem, easier to entering twrp ui with the ugly themed greek version
Click to expand...
Click to collapse
ok, yes thats it. have you tried to flash magisk?

@flamedrops not yet, i never tried to flash magisk yet, ill tried next time i could pass twrp splash screen

flamedrops said:
i have experience that, then i flash the twrp chinese version and it works.
Click to expand...
Click to collapse
Can you list your steps to fix this? My data and cache partitions are 0kb and i get i/o errors too.

I have persist problems after installing muiu 11 over the los16.
Thinking about relock it and sens it back to aliexpress seller.

@mvha just go into fastboot mode, and flash persist.img from stock fastboot rom,
With command : fastboot flash persist persist.img
Thats all

Arif Ferdian said:
So do I, first time I successfully instal first beta v25 miui 11, and than when the v26 comes, stupidly, i flash it from twrp, it tells me that i succeed installing that zip, and than i wipe art and cache and reboot system, but what next i know, my phone brick, i can not instal anyrom, from mi flash tool, or from anywhere. I did everything and still can not fix the problem.
Anyway, you still can enterin TWRP UI, after waiting about 10 to 30 minutes, because after intalling that rom, automatically your data format change from ext4 to f2fs, and twrp will need a lot of time to read your disk.
But, even after doing anything in twrp, still can not make my phone successfully boot into system.
And theres moun I/O error everytime i tried to wipe everything, or fix disk, or change disk format. Everything... and i just dont know what to do anymore.
So may be you can wait patiently until you can entering twrp ui, and please lemme know if you know how to fix this problem
Click to expand...
Click to collapse
This makes sense as I remember trying to boot into stock recovery early in the morning. I woke up and it finally booted, but the recovery was in Chinese. I will give 4PDA TWRP about an hour and see what I can do. Thanks.

Soapy! said:
This makes sense as I remember trying to boot into stock recovery early in the morning. I woke up and it finally booted, but the recovery was in Chinese. I will give 4PDA TWRP about an hour and see what I can do. Thanks.
Click to expand...
Click to collapse
If you can not use 4pda, i suggest u to use greek one, thats twrp version the must successfully booting in my experiences

I am thankful that I saw this before updating to newest miui 11

flamedrops said:
ok, yes thats it. have you tried to flash magisk?
Click to expand...
Click to collapse
Can not flash magisk, etc hahahhahaa

Arif Ferdian said:
If you can not use 4pda, i suggest u to use greek one, thats twrp version the must successfully booting in my experiences
Click to expand...
Click to collapse
After you used the Greek twrp did you manage to solve the problem?

! ...

Hey hopefully someone could help me.
So i wanted to install android 10 on my Mi9t. After unlocking and installing TWRP i have wiped the Phone (everything accept usb OTG) after that i got stuck in Fastboot. Now ive get to managed it in to TWRP again but couldnt install any rom. Ive tried with Miflash it says Rollback check error. I Have anti:1. Im Lost..
Does anyone have an idea? I´ve installed Miflash on C:

BimSxx said:
Hey hopefully someone could help me.
So i wanted to install android 10 on my Mi9t. After unlocking and installing TWRP i have wiped the Phone (everything accept usb OTG) after that i got stuck in Fastboot. Now ive get to managed it in to TWRP again but couldnt install any rom. Ive tried with Miflash it says Rollback check error. I Have anti:1. Im Lost..
Does anyone have an idea? I´ve installed Miflash on C:
Click to expand...
Click to collapse
Never wipe everything
Go to fastboot and flash via there the ROM, maybe even the persist partition

Pupet_Master said:
Never wipe everything
Go to fastboot and flash via there the ROM, maybe even the persist partition
Click to expand...
Click to collapse
THX for your answer. I´ve tried to install via Fastboot. With MIFLASH but i got the anti rollback check error. I´ve read an tutorial where it stands Wipe everything execpt USB OTG. Now im Smarter...
After i installed boot.img recovery.img and system.img with the official Rom. it boots up to the original recovery.

So after you erased all but OTG, you did not install a rom? Cause you only mentioned "after that".

BimSxx said:
THX for your answer. I´ve tried to install via Fastboot. With MIFLASH but i got the anti rollback check error. I´ve read an tutorial where it stands Wipe everything execpt USB OTG. Now im Smarter...
After i installed boot.img recovery.img and system.img with the official Rom. it boots up to the original recovery.
Click to expand...
Click to collapse
Try via fastboot on ADB console, not miflash.
Start with the persist partition and then flash TWRP again and flash a ROM that you are positive that TWRP flash fine (some don't). Stock MIUI i'm speaking.

Wmateria said:
So after you erased all but OTG, you did not install a rom? Cause you only mentioned "after that".
Click to expand...
Click to collapse
After i wiped it i cant install on OS. There were no Folders...

Pupet_Master said:
Try via fastboot on ADB console, not miflash.
Start with the persist partition and then flash TWRP again and flash a ROM that you are positive that TWRP flash fine (some don't). Stock MIUI i'm speaking.
Click to expand...
Click to collapse
Yes did it with ADB fastboot. I can install the Rom complete fine but nothing works. I´ve tried with TWRP. Will do that again.
Im Sorry you mean first: flash persist.img? and then the twrp recovery and after that install the rom over twrp?

Soo I flashed an older version it works. But No Wifi i will try to Update it over LTE. Do i have to flash the persist.img ?
Everything is fine now! Thank you for you´re Help!

BimSxx said:
Soo I flashed an older version it works. But No Wifi i will try to Update it over LTE. Do i have to flash the persist.img ?
Everything is fine now! Thank you for you´re Help!
Click to expand...
Click to collapse
If the sensors are not working (gyroscope, camera, etc) you will need.
If you solve the Wifi issue then no need

After update to V11.0.4.0.QFJEUXM TWRP no longer available

Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!

Same thing happening to me, no matter what I do, stock recovery keeps overwriting TWRP

Oh dear, that doesn't sound good.
I hope there will be a solution to the problem soon.
I don't want to do without TWRP and root.
I wanted to try it according to these instructions "https://miui.blog/redmi-k20/twrp-mi-9t-redmi-k20-vbmeta-mauronofrio/". But don't trust me, I'm afraid that it won't work and I can start all over again.

Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.

The fact that twrp is lost when flashing official rom (even thought twrp itself) is normal. You just have to reboot into bootloader and flash twrp again and it will be back.
Your problem here is that you are using an old and unofficial twrp build, that has problems on newer roms. Flash official twrp and you'll be fine

houbaba said:
Flash official TWRP this morning with fastboot commands without problem.
1. reboot in fastboot mode
2. Flash recovery with this command "fastboot flash recovery yourrecovery.img"
3. Reboot in recovery with this command "fastboot boot yourrecovery.img"
Any problems here.
Click to expand...
Click to collapse
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop

hounter17 said:
Can u share the twrp file, im unnable to flash the one i have without causing a bootloop
Click to expand...
Click to collapse
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html

RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Oh sorry it works? I read somewhere that the original causes also bootloops :good:

Found something on a Russian website.
Обновление TWRP Recovery от LR.Team для устройств на Android 10
Does anyone dare to test this?
Here is the link to the TWRP for our Mi9t
> TWRP-3.3.1-1109-DX (полный комплект для установки) <
Check it out...

I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.

frank808 said:
I finally got it
I did the following.
"V11.0.4.0.QFJEUXM" flashed in the TWRP and booted into the system, TWRP will be overwritten.
Now flashed TWRP "twrp-3.3.1-0-davinci.img" in Fastboot and booted into Recovery (TWRP).
To be on the safe side, I had the cell phone booted again into the TWRP in the TWRP.
Then I flashed Magisk "Magisk-v20.3.zip".
Booted cell phone into the system and everything works.
Click to expand...
Click to collapse
Where did you get the twrp file from?

You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899

RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Ok, I am on global 11.0.4.0 (QFJMIXM) and I used this latest twrp-3.3.1-0-davinci.img and I can confirm its working without bootloop.

ShiningScias said:
You can use OrangeFox Recovery if you want a TWRP that can survive after flashing MIUI ROMs or updates :
https://forum.xda-developers.com/mi-9t/development/official-orangefox-recovery-project-t4037899
Click to expand...
Click to collapse
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so

zgfg said:
To install TWRP, is it neccesary to wipe Data (or something else)?
And if Data must be wiped, does it mean that Data will no more be encrypted as originally by MIUI?
I have 11.0.4.0, rooted by Magisk (Magisk installed simply by patching and flashing boot.img, did not need TWRP for, did not wipe Data, etc) and I possibly want to have TWRP but don't want to loose encryption of Data, Widewine L1 and so
Click to expand...
Click to collapse
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
A custom Recovery doesn't change Widevine level.
And TWRP is useful in case of bootloop (because of an installed Magisk module, by example) or if you want to easily reinstall Magisk after ROM update.

RedNas74 said:
Download from the official twrp site here: https://twrp.me/xiaomi/xiaomimi9t.html
Click to expand...
Click to collapse
Micdu70 said:
You don't need to wipe anything to install a custom Recovery (like TWRP).
TWRP can handle ROM encryption, you just need to install a correct TWRP, and version, for your current MIUI / Android version.
Click to expand...
Click to collapse
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img

zgfg said:
Ok thanks, so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Yes, it should work.
But I prefer OrangeFox Recovery.

zgfg said:
so starting from v11.0.4.0 QFJEUXM, rooted by Magisk (did not wipe Data or so, just patched and flashed boot img), is it ok just to flash (from Fastboot) twrp-3.3.1-0-davinci.img, downloaded from the official site https://twrp.me/davinci/twrp-3.3.1-0-davinci.img
Maybe I could test first by
fastboot boot twrp-3.3.1-0-davinci.img
Click to expand...
Click to collapse
Micdu70 said:
Yes, it should work.
But I prefer OrangeFox Recovery.
Click to expand...
Click to collapse
Something is fishy. IMO, if that official TWRP is really ok for 11.0.4.0, then it should correctly boot by:
fastboot boot twrp-3.3.1-0-davinci.img
But phone rebooted into the dark.
TG, I didn't really flash with, so by long pressing Pow it rebooted to system.
Tried again, no avail
Edit:
Tried the same fastboot boot with
twrp-3.3.1-12-davinci-mauronofrio.img and also OrangeFox-R10.1_1-Stable-davinci.img (obtained by unzipping OrangeFox), but it also reboots to dark and I have to long press Pow to reboot to system

frank808 said:
Hi Guys,
yesterday the new update came out, great.
I of course immediately pulled the zip (source) and installed it with TWRP (source).
So far no problems.
After a while I realized that I no longer had root because the apps stopped working.
When I wanted to boot into the TWRP to reinstall Magisk, I unfortunately found that it was no longer available, but only stock recovery.
Well, I thought to myself and tried to reinstall TWRP (method-twrp-3.3.1-2-davinci-fix), which was fatal, because my cell phone only booted into the Fastboot.
Then I got my cell phone, set up again with the Fastboot method.
Now I'm back to 11.0.4.0 but unfortunately without TWRP and root.
Can someone please describe how I can get TWRP and root again on Android 10?
I am thankful for every help !!!
Click to expand...
Click to collapse
You can install twrp by All In One tool
You can find its thread here itself

I took the official TWRP. " Link "
Flashed in fastboat and then booted the phone with a key combination in TWRP.
With the Fastboot command it didn't work for me either, the cell phone remained black ...