Hello.
I recently updated my phone to android 10 and now my VoWifi and VoLTE is not working. It worked before but I had to go through the logkit to turn it on.
The settings in the logkit was gone with the latest update and I install a new logkit and turn everything on again, but its like its not activating the VoWifi and VoLTE.
Any ideas?
Nesrail said:
Hello.
I recently updated my phone to android 10 and now my VoWifi and VoLTE is not working. It worked before but I had to go through the logkit to turn it on.
The settings in the logkit was gone with the latest update and I install a new logkit and turn everything on again, but its like its not activating the VoWifi and VoLTE.
Any ideas?
Click to expand...
Click to collapse
Did you enable the profile for volte and vowifi again?
Sent from my ONEPLUS A6013 using Tapatalk
DaOldMan said:
Did you enable the profile for volte and vowifi again?
Sent from my ONEPLUS A6013 using Tapatalk
Click to expand...
Click to collapse
Yes sir. No luck.
Nesrail said:
Yes sir. No luck.
Click to expand...
Click to collapse
Check out the profiles again as for sure that's the culprit. I am doing the same and all works just fine on 10.3.0.
Good luck !
DaOldMan said:
Check out the profiles again as for sure that's the culprit. I am doing the same and all works just fine on 10.3.0.
Good luck !
Click to expand...
Click to collapse
Just to be sure we are talking about the same, here are two screenshots.
Nesrail said:
Just to be sure we are talking about the same, here are two screenshots.
Click to expand...
Click to collapse
That's the easy part of using old logkit.
I am talking about doing the guide of opening the profiles inside the Qualcomm modern.
I mean this guide here:
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
Sent from my ONEPLUS A6013 using Tapatalk
DaOldMan said:
That's the easy part of using old logkit.
I am talking about doing the guide of opening the profiles inside the Qualcomm modern.
I mean this guide here:
https://forum.xda-developers.com/oneplus-5t/how-to/guide-volte-vowifi-german-carriers-t3817542
Sent from my ONEPLUS A6013 using Tapatalk
Click to expand...
Click to collapse
I appreciate the hint but I already rolled my phone back to Android 9. Now I'm to afraid to upgrade if it shouldn't work. And since there is no "Denmark guide" or guide for 6T I don't trust it. But maybe I will try sometime. Right now I'm sticking with what works.
Nesrail said:
I appreciate the hint but I already rolled my phone back to Android 9. Now I'm to afraid to upgrade if it shouldn't work. And since there is no "Denmark guide" or guide for 6T I don't trust it. But maybe I will try sometime. Right now I'm sticking with what works.
Click to expand...
Click to collapse
Search for Denmark in the guide. It works for almost everyone. But it's better to be rooted to backup efs first. Whatever works for you.
Sent from my ONEPLUS A6013 using Tapatalk
After updating to A10 (10.3.0) I no longer have the options to enable the switches (can be fixed with magisk module), but *#801# no longes works. Because I cannot enable Serial and Full-port switch, I also cannot use Qualcomm PDC. Does 801 work for you, or are you using another method?
Edit: never mind, figured it out. Had to install engineering mode app! All is good.
efex said:
After updating to A10 (10.3.0) I no longer have the options to enable the switches (can be fixed with magisk module), but *#801# no longes works. Because I cannot enable Serial and Full-port switch, I also cannot use Qualcomm PDC. Does 801 work for you, or are you using another method?
Edit: never mind, figured it out. Had to install engineering mode app! All is good.
Click to expand...
Click to collapse
Can you share the apk ?
And did it work to enable voLTE and VoWifi again?
Nando14sunny said:
Can you share the apk ?
And did it work to enable voLTE and VoWifi again?
Click to expand...
Click to collapse
First off, I replaced the new OEMLogKit with an older version, to be able to turn on voLTE/VoWifi witches in *#800#.
-OR-
Use a magisk module to make the switches available, I think I used this one for test purposes and it worked as intended.
To be able to use *#801# (serial), install EnrineeringMode apk, I used this one from APK mirror.
After this is done you can simply use Qualcomm PDC tool to change profile just like in Pie. :good:
When its done it's safe to uninstall EngineeringMode apk again.
EDIT: Yes, VoLTE and ViWifi works great! In my case I use the profile for H3G Denmark Commercial, but yeah.. What profile to use is operator dependant.
efex said:
First off, I replaced the new OEMLogKit with an older version, to be able to turn on voLTE/VoWifi witches in *#800#.
-OR-
Use a magisk module to make the switches available, I think I used this one for test purposes and it worked as intended.
To be able to use *#801# (serial), install EnrineeringMode apk, I used this one from APK mirror.
After this is done you can simply use Qualcomm PDC tool to change profile just like in Pie. :good:
When its done it's safe to uninstall EngineeringMode apk again.
EDIT: Yes, VoLTE and ViWifi works great! In my case I use the profile for H3G Denmark Commercial, but yeah.. What profile to use is operator dependant.
Click to expand...
Click to collapse
wow perfect! I will try it tomorrow Thank you!
efex said:
First off, I replaced the new OEMLogKit with an older version, to be able to turn on voLTE/VoWifi witches in *#800#.
-OR-
Use a magisk module to make the switches available, I think I used this one for test purposes and it worked as intended.
To be able to use *#801# (serial), install EnrineeringMode apk, I used this one from APK mirror.
After this is done you can simply use Qualcomm PDC tool to change profile just like in Pie. :good:
When its done it's safe to uninstall EngineeringMode apk again.
EDIT: Yes, VoLTE and ViWifi works great! In my case I use the profile for H3G Denmark Commercial, but yeah.. What profile to use is operator dependant.
Click to expand...
Click to collapse
Okay i tried to do it ^^ but if i type *#801# and then on serial, the app simply crashes and doesnt change "serial" to on :l
Nando14sunny said:
Okay i tried to do it ^^ but if i type *#801# and then on serial, the app simply crashes and doesnt change "serial" to on :l
Click to expand...
Click to collapse
Yeah one of the options crashed the app, but you don't need that option enabled. I believe I just turned on the third box and then the first. I'm not sure which options are required, but that did it for me.
efex said:
Yeah one of the options crashed the app, but you don't need that option enabled. I believe I just turned on the third box and then the first. I'm not sure which options are required, but that did it for me.
Click to expand...
Click to collapse
Confirmed - just activated it the way you described. A big thanks, mate!!
- install old logkit and engineer mode app
- dial *#800# - activate VoWiFi and/or VoLTE
- activate switches in Settings/SIM & network
- dial *#801# - activate 'Full-port switch' (activating 'Serial' crashes the app but it is NOT necessary for the procedure to proceed!)
- as already known deactivate Sub0 and Sub1 in Overseas-blahblah and remove it afterwards; then activate Sub0 and Sub1 in H3G-Denmark and set it as active
- enjoy calls through your WiFi again
Related
Hi guys,
I wondered if there is a way to switch my data to 2G when screen is off and turn it back to LTE when screen is on in order to save some battery?
I've tried the following via Tasker:
status>display>off
then
plugin>secure settings>custom ROM actions>LTE>off
status>display>on
then
plugin>secure settings>custom ROM actions>LTE>on
When I toggle LTE off does it use 2G automatically and if so, how can I see if it really works?
I am rooted ofc...
Intelli3G does the trick very well. Xposed is needed.
Sent from my black pearl using Tapatalk
nunein said:
Intelli3G does the trick very well. Xposed is needed.
Sent from my black pearl using Tapatalk
Click to expand...
Click to collapse
Hm....I run a ROM where Xposed is not suggested..
There has to be another way right?
via Tasker with a command f.e. or soemthing.
Switching network modes isn't instant and swtiching to a newer one will cause the phone to reconnect to the network.
PePeMoke said:
Hm....I run a ROM where Xposed is not suggested..
There has to be another way right?
via Tasker with a command f.e. or soemthing.
Click to expand...
Click to collapse
Hi,
there is :http://forum.xda-developers.com/android/apps-games/widget-toggle-network-type-5-0-xda-t2945406
But don't know wich rom you use
I had an issue with RR 5.5.8 (selinux enforcing)
I use smart network.
delete please
wrong thread ;P
Hey xda People,
can someone teach me how to enable native call recording on the s7 edge please? I rooted my s7 edge few hours ago and I'm done setting it up how I want minus the call recording... can someone help? also can maybe someone help getting App Lock to work? anyone out there knows how it's done?
cheers
I don't know if anybody else has this but after i have finished a phone call, all my conversations are in the Voice Recorder app on my phone inside the recordings tab. Very clear sound on both sides of the conversation. Try that.
Since you have root, get Xposed Framework, then get xTouchWiz Module, its in the settings. I have call recording through this.
Get Xposed here, then flash it AND ALSO get the APK for the Xposed app there,
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Then get the xTouchWiz module inside Xposed framework, the phone recording can also be configured to on/off toggle or auto record every call.
Both Mods in CSC/Others.xml
Call Recording
<CscFeature_VoiceCall_ConfigRecording>RecordingAllowed</CscFeature_VoiceCall_ConfigRecording>
Click to expand...
Click to collapse
App Lock
<CscFeature_SmartManager_ConfigSubFeatures>roguepopup|autoclean|autorestart|applock|applicationpermission|</CscFeature_SmartManager_ConfigSubFeatures>
<CscFeature_SmartManager_ConfigDashboard>dual_dashboard</CscFeature_SmartManager_ConfigDashboard>
Click to expand...
Click to collapse
Then Move the attached app to System/Priv-App/ and Restart the device
Jomari29 said:
Since you have root, get Xposed Framework, then get xTouchWiz Module, its in the settings. I have call recording through this.
Get Xposed here, then flash it AND ALSO get the APK for the Xposed app there,
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Then get the xTouchWiz module inside Xposed framework, the phone recording can also be configured to on/off toggle or auto record every call.
Click to expand...
Click to collapse
Ive tried this and got it all installed. My only problem is there is nothing in download list in exposed. I flashe the sdk23 64 arm version and it all apprears ok, just nothing in the repo shows up and the the download tab is greyed out.
I tried reflashing but still the same....
any ideas??
Ok I got this fixed just was making a mistake with not restating phone. My bad
neckabutu said:
Ive tried this and got it all installed. My only problem is there is nothing in download list in exposed. I flashe the sdk23 64 arm version and it all apprears ok, just nothing in the repo shows up and the the download tab is greyed out.
I tried reflashing but still the same....
any ideas??
Click to expand...
Click to collapse
Use what I've suggested. This is a small mod which doesn't have to go through Xposed.
I prefer system inbuilt mods rather than depending on an app or xposed.
Mental pleasure of making the rom lightweight.
JazonX said:
Use what I've suggested. This is a small mod which doesn't have to go through Xposed.
I prefer system inbuilt mods rather than depending on an app or xposed.
Mental pleasure of making the rom lightweight.
Click to expand...
Click to collapse
Thanks for quick reply , but my question was more about exposed itself. I couldnt find any one else with same sort of problem until i read this
neckabutu said:
Ive tried this and got it all installed. My only problem is there is nothing in download list in exposed. I flashe the sdk23 64 arm version and it all apprears ok, just nothing in the repo shows up and the the download tab is greyed out.
I tried reflashing but still the same....
any ideas??
Click to expand...
Click to collapse
100% youre rooted? and BusyBox installed?
Yes 100%.
I uninstalled and flashed older version but same deal
Sent from my SM-G935F using XDA-Developers mobile app
Prefer using the built in app
JazonX said:
Both Mods in CSC/Others.xml
Call Recording
App Lock
Then Move the attached app to System/Priv-App/ and Restart the device
Click to expand...
Click to collapse
JazonX said:
Use what I've suggested. This is a small mod which doesn't have to go through Xposed.
I prefer system inbuilt mods rather than depending on an app or xposed.
Mental pleasure of making the rom lightweight.
Click to expand...
Click to collapse
YAAAAAAAAS!!! This is exactly what I was looking for! And I'm 100% on board with u on the Mental pleasure of making the rom lightweight.
I did what u told me. Added the lines in others.xml in the csc folder and and created a AppLock folder in System/Priv-App/ and copied the AppLock.apk in there and set the right permissions.
After reboot nothing.
read thread and installed busybox via playstore and installed busybox from within app. Do I have to keep the busybox app after installing the "framework" or whatever busybox is?
After reboot nothing.
looked at the "code" says something about SmartManager in the beginning. Does this depend on SmartManager? Because I deleted it whilst de-bloating....
trying to get SmartManager to work again right now. In the meantime can someone maybe point out something I could have missed or done wrong please?
http://forum.xda-developers.com/galaxy-s6-edge/general/quick-guide-enabling-hidden-features-t3087506
To
JazonX said:
Both Mods in CSC/Others.xml
Call Recording
App Lock
Then Move the attached app to System/Priv-App/ and Restart the device
Click to expand...
Click to collapse
What is app lock?
Sended from my Samsung Galaxy S7 Edge Gold Platinum
turtuv said:
What is app lock?
Click to expand...
Click to collapse
It's a Samsung native app which allows to lock apps individually. For example you can lock Gallery using this app with fingerprint, pin, password and have to enter one of those to get access to the app. Very good security measurement.
chieco said:
It's a Samsung native app which allows to lock apps individually. For example you can lock Gallery using this app with fingerprint, pin, password and have to enter one of those to get access to the app. Very good security measurement.
Click to expand...
Click to collapse
Thanks, very interesting. But I don't see it on my phone. Where is it?
Sended from my Samsung Galaxy S7 Edge Gold Platinum
For those who can't find Applock - Go to Smart Manager and Swipe once to Left. It's on the Second Dashboard Bottom Row named as App Behavior.
JazonX said:
For those who can't find Applock - Go to Smart Manager and Swipe once to Left. It's on the Second Dashboard Bottom Row named as App Behavior.
Click to expand...
Click to collapse
Doesn't happen anything if I swipe to left.
And where is the CSC/Others.xml?
Sended from my Samsung Galaxy S7 Edge Gold Platinum
I've just followed steps here to and I can't get it to show up.
Strange. I'm running Australia latest firmware debadged
Hey everyone I got it to work! But the instructions from the first page are wrong that's the reason why it's not working for u guys. Right now I'm very busy but I post a guide and maybe video guide on how to do it right. Please be patient.
chieco said:
Hey everyone I got it to work! But the instructions from the first page are wrong that's the reason why it's not working for u guys. Right now I'm very busy but I post a guide and maybe video guide on how to do it right. Please be patient.
Click to expand...
Click to collapse
Thanks! But I still don't understand why in Smart Manager nothing happen if i swipe to the left like JasonX said.
Sended from my Samsung Galaxy S7 Edge Gold Platinum
I found a magisk module named voenabler. when I installed that I have enhanced LTE option in settings but no use.
Can any dev enable volte in any ROM using that kind of modules??
I know it has discussed many times that zuk z1 can't have volte but I saw this module and thought it'll work.
Itsmeraj said:
I know it has discussed many times that zuk z1 can't have volte but I saw this module and thought it'll work.
Click to expand...
Click to collapse
Will not worked when you read the discussion you've found already. Again: it's the modem update that needs to be provided from the manufacturer.
That module just provides a switch for enhanced LTE , not the logic behind
strongst said:
Will not worked when you read the discussion you've found already. Again: it's the modem update that needs to be provided from the manufacturer.
That module just provides a switch for enhanced LTE , not the logic behind
Click to expand...
Click to collapse
Ok thanx
Itsmeraj said:
I found a magisk module named voenabler. when I installed that I have enhanced LTE option in settings but no use.
Can any dev enable volte in any ROM using that kind of modules??
Click to expand...
Click to collapse
which rom ??? link please....
shirsho said:
which rom ??? link please....
Click to expand...
Click to collapse
You can download this module in any rom.
But don't download this will not work
you can use jio4gvoice app to enable voice calls. (Keep location on to receive calls)
Itsmeraj said:
I found a magisk module named voenabler. when I installed that I have enhanced LTE option in settings but no use.
Can any dev enable volte in any ROM using that kind of modules??
Click to expand...
Click to collapse
am also having this same problem..the magisk module is already installed..but no use of that
I have a trouble with jOnePlus Call recording Feature it doesn't work.
I also tried EnableOOSNativeCallRecording v1.0 from here and didn't worked.
What is the best APP or MOD to enable call recording in OREO beta 14 OOS
( Rooted)
Install xposed and the module gravity box for oreo, there you can activate call recording, this works for me.
Please give feedback if it works for you too
Anonymouze said:
Install xposed and the module gravity box for oreo, there you can activate call recording, this works for me.
Please give feedback if it works for you too
Click to expand...
Click to collapse
Is there a way without Xposed?
Abdulaziz6p said:
Is there a way without Xposed?
Click to expand...
Click to collapse
I'm sorry but I don't know
Just use the Magisk Module. Works fine.
Yes... Use magisk module... Works for me too...
Try to give permissions to stock recording app and it will work!
Rick0x7 said:
Just use the Magisk Module. Works fine.
Click to expand...
Click to collapse
Didn't worked
siddheshvartak said:
Yes... Use magisk module... Works for me too...
Click to expand...
Click to collapse
Didn't worked
Abdulaziz6p said:
Didn't worked
Didn't worked
Click to expand...
Click to collapse
Sorry to hear that it didnt work.
It should work non the less. I'd do a fresh install if you really want this to work. Magisk is the way that works for all of us.
Rick0x7 said:
Sorry to hear that it didnt work.
It should work non the less. I'd do a fresh install if you really want this to work. Magisk is the way that works for all of us.
Click to expand...
Click to collapse
It did not work on ob14 as discussed already in ob14 thread and here https://forum.xda-developers.com/on...ble-call-recording-boot-t3634292/post77163120
strongst said:
It did not work on ob14 as discussed already in ob14 thread and here https://forum.xda-developers.com/on...ble-call-recording-boot-t3634292/post77163120
Click to expand...
Click to collapse
Thanks.
تم الإرسال من ONEPLUS A5000 باستخدام Tapatalk
*
strongst said:
It did not work on ob14 as discussed already in ob14 thread and here https://forum.xda-developers.com/on...ble-call-recording-boot-t3634292/post77163120
Click to expand...
Click to collapse
Works fine on OB14 here. Try the July 23th version.
I understand that there are many different configurations and alot of variables that might change how things work for everyone. But here's my setup that works fine with, everything really:
OB14+twrp(codeworx)+magisk(+busybox, +callrecording) +xposed(whole lot of m).
-eos-
Rick0x7 said:
*
Works fine on OB14 here.
Click to expand...
Click to collapse
As you can read, it's depending on the region and will be disabled after a while. In Germany it's not working anymore, ob13 it was.
So maybe you live in a region where oneplus allows it.
I am also in Germany, and it has worked since OB14's release day. ; )
Perhaps install busybox and make sure youve got your basics right.
I think that covers it all, best of luck.
Rick0x7 said:
I am also in Germany, and it has worked since OB14's release day. ; )
Perhaps install busybox and make sure youve got your basics right.
I think that covers it all, best of luck.
Click to expand...
Click to collapse
Are you talking about the Magisk module https://forum.xda-developers.com/oneplus-5/themes/app-enable-call-recording-boot-t3634292 or the fact that it is not natively working on ob14?
Oh and I already tried multiple times with stock ob14, busybox(cause I need it for other purposes) and the above mentioned magisk native call rec enabler from @shadowstep. It's not working anymore.
Did you made a clean installation of ob14 or an update from ob13?
This guide is for Mi A2 (Jasmine_sprout) ONLY
Flash at your own Risk
Recently me and some other guys finally managed to install the Android Q DP3 on our Mi A2 and we decided to share the guide with you :
First make sure that you have a backup if anything goes wrong while flashing and that you have downloaded all linked files :
1. Restore the TWRP Backup from here
2. Erase Data and internal Storage
3. Flash DM-Verity & Forceencrypt Disabler from here
4. Erase Data and internal Storage
5. Reboot
Bugs :
1. Bluetooth is not working (Crashes)
2̶.̶ ̶P̶o̶o̶r̶ ̶a̶u̶d̶i̶o̶ ̶i̶n̶ ̶c̶a̶l̶l̶s̶ ̶(̶m̶a̶y̶b̶e̶ ̶o̶n̶l̶y̶ ̶l̶o̶u̶d̶s̶p̶e̶a̶k̶e̶r̶ ̶i̶s̶ ̶w̶o̶r̶k̶i̶n̶g̶ ̶i̶n̶ ̶c̶a̶l̶l̶s̶)̶̶ (just use the new TWRP Backup)
3̶̶.̶̶ ̶̶h̶̶o̶̶t̶̶s̶̶p̶̶o̶̶t̶̶ ̶̶i̶̶s̶̶ ̶̶n̶̶o̶̶t̶̶ ̶̶w̶̶o̶̶r̶̶k̶̶i̶̶n̶̶g̶ (to fix hotspot put attached hotspad.apk in vendor/overlay and if there is no such folder create one)
Other you tell me
Screenshots are attached
NOTE : Since Android Q is a beta and this is WIP dont expect flagship performance or a bugfree experience
Special Thanks to:
@rcstar6696
@willsrockson
@erfanoabdi
@Nail_snail
and every other person who helped to get this working
Wow, great work dude
deleted
StarSix01 said:
This guide is for Mi A2 (Jasmine_sprout) ONLY
Flash at your own Risk
Click to expand...
Click to collapse
Works perfectly fine. And as mentioned on bug list, apart from Bluetooth, Hotspot (though I'm not rely on it much) and in call volume (only loudspeaker) I noticed that phone does recognized USB OTG but it says, it needs to be fixed/format, may be it's just me but OTG works fine though using twrp file manager! And yes, agreed to your point that it is still beta and it can't be completely bug free. Thanks all for providing useful links and testing it extensively before releasing!
NE0HP said:
Works perfectly fine. And as mentioned on bug list, apart from Bluetooth, Hotspot (though I'm not rely on it much) and in call volume (only loudspeaker) I noticed that phone does recognized USB OTG but it says, it needs to be fixed/format, may be it's just me but OTG works fine though using twrp file manager! And yes, agreed to your point that it is still beta and it can't be completely bug free. Thanks all for providing useful links and testing it extensively before releasing!
Click to expand...
Click to collapse
Hotspot is fixed, gonna upload the file when I have wifi already updated the guide
Sent from my Mi A2 using XDA Labs
Any solution for poor audio?
rober788 said:
Any solution for poor audio?
Click to expand...
Click to collapse
In call audio?
Sent from my Mi A2 using XDA Labs
Yes
rober788 said:
Yes
Click to expand...
Click to collapse
No, it's on the bug list, but we're testing some things to get it working
Sent from my Mi A2 using XDA Labs
I think all of the issues is related with apps on vendor/overlay. Btw your hotspot fix is making every app crash. Is there anything specific to copy apk to vendor/overlay (i pushed it from adb)
Users with slow emmc bug can do Androbench test with 512mb to see it will fix?
Ant updates for in call audio?
google canera woks or not ?
malackov said:
google canera woks or not ?
Click to expand...
Click to collapse
you can enable it in build.prop
rober788 said:
Ant updates for in call audio?
Click to expand...
Click to collapse
its fixed gonna publish soon a fix
Cannot signing in Google Account. When I open Setting > Google, only a blank screen shows up and display nothing.
Digital Wellbeing not working as well, it always force stop.
Does anybody have an idea?
liyingheng said:
Cannot signing in Google Account. When I open Setting > Google, only a blank screen shows up and display nothing.
Digital Wellbeing not working as well, it always force stop.
Does anybody have an idea?
Click to expand...
Click to collapse
Install latest GMS (Google play services). Search on apk mirror.
Can I get the link please...
Amnvlad said:
Can I get the link please...
Click to expand...
Click to collapse
https://www.apkmirror.com/apk/google-inc/google-play-services/
Here you go, choose latest one (careful not to choose for tv or wear)
Any updates on low in call audio?
rober788 said:
https://www.apkmirror.com/apk/google-inc/google-play-services/
Here you go, choose latest one (careful not to choose for tv or wear)
Any updates on low in call audio?
Click to expand...
Click to collapse
Sorry but I asked for the Q rom , the one I downloaded from the above link Qbackup.zip isn't working. When I try to flash it is showing error.