Database Users

(n8000) Stuck at Samsung Logo, possible fix

I'm having this problem past few days, tried all the links in the Q/A section, dev.. all links were dead.. and managed to found solutions for this problem.
Basically, the tab will stuck on "Samsung" logo and looping for eternity... tried to reflash the rom, wipe system and everything via odin.. will results the same thing...and I thought I'm gonna say good bye forever for my note 10.1 (n8000)...or send for repair (which samsung quoted me ~ $158 for the "board replacement"... but until I found how to get it alive... actually I've no idea what causing my n8000 stuck in the first place..
After a whole day "intensive" searching and everything.. almost all files links in xda were dead.. and finally I found out all the files and solutions..
What you'll need
> Odin 3.xx, can get from samfirmware website
http://www.sammobile.com/firmwares/download/30977/N8000XXUDNE5_N8000OLBDNE3_XME/
> Samsung drivers
http://forum.xda-developers.com/showthread.php?t=961956
> note 10.pit and efs (extract the efs.rar after download, yes it's i9300 but can be used)
> n8000 rom, can get from http://www.sammobile.com/ or development section. I prefer flashable rom in recovery such as android revolution HD, and place it in microsd.
> Philztouch CWM
(files as attached)
Steps to do the recovery
1. Download odin and extract
2. Download drivers and install.
3. Run Odin, place the following files
- click the PIT button, select the note10.pit.
- click the CSC, and select the previously extracted efs.rar..it should be efs.tar now
- click on AP, for custom recovery, such as philz.. or official rom..up to you.
4. Tick the following menus in Odin
- Re-Partition (optional, some users said no need to tick this would do as well)
- Phone bootloader update
- Phone EFS clear
5. Place your n8000 in download mode, and connect via USB.
6. Click on START button.. and hopefully success.
7. Once finishes, reboot into recovery mode (those who flash rom via Odin can skip this), and install the rom zip file.
Everything should be fine now and your n8000 should able to start properly... that's how I managed to "resurrect" my n8000 tho... hope these helps... mine was n8000 16GB, 3G/Wifi version

What is decription key for Mega download?

What is decription key for Mega download?

Also need the description key for the MEGA Downloads please.

description plz

sorry for didnt notice the replies, not sure why my notifications were off.
will reupload again later this, since mega kinda blocked my account details :s

Attached the related files...seems cloud storage failing on me..

Hi there!
I'm new to this and need help understanding what to install under Step 2, which is downloading and installing of Samsung drivers.
I have already unzipped the Samsung driver file but I don't seem to see any installation files. Do I have to plug in my Note to get to this? Or are they installed onto the computer first?
Many thanks, as this could potentially save my Note and save me $500... :fingers-crossed:

boootloop problem
tried all this ,but still my n8000 did not flash through odin properly but failed with error
'Repartition operation failed'

After running odin it says "reset" then the tablet returns to the "Galaxy note 10.1" logo and cycles going black then showing the logo.
When I hold down the power button it shuts off and turns back on again. So no luck for booting into recovery.
Im 99% i'm doing all the steps right.
Thank for your help.

ipoddude95, I have same problem. I tried different computers, different cable, different versions of odin to flash different versions of stock roms. but no success so far...

Similar problem
Hi,
I've got similar problem and I check couple of methods to solve this, unfortunately none was successful.
I tried method described in this thread, but was not successful.
I have old version of TWRP recovery (2.5.0.0). I can load recover but whatever I try to do - clear cache, format data, install recovery using dd it finish with error.
I tried installing new recovery twrp and philz using odin, using heimdall, everything seems to be ok, but when I try to load recovery I've got couple of restarts and then old TWRP loads. I've tried stock firmware, custom, with repartition and without.
I'm guessing that in my case it could be some kind of physical problem with memory.
What I can check more or what to try? How can I determine whether problem may be physical with rom memory?

shaikhmdjohar said:
tried all this ,but still my n8000 did not flash through odin properly but failed with error
'Repartition operation failed'
Click to expand...
Click to collapse
try different port
weird those how i fixed 2 of the n8000, later on will try on my tab again once i got my tab back from my friend

ipoddude95 said:
After running odin it says "reset" then the tablet returns to the "Galaxy note 10.1" logo and cycles going black then showing the logo.
When I hold down the power button it shuts off and turns back on again. So no luck for booting into recovery.
Im 99% i'm doing all the steps right.
Thank for your help.
Click to expand...
Click to collapse
try go to download mode, and reflash recovery

gamesky said:
try go to download mode, and reflash recovery
Click to expand...
Click to collapse
I have, instead of just showing the initial "galaxy note 10.1" screen it goes to the "Samsung" logo with the animation and cycles through that. Still can't get into recovery.
thanks for the help

Hello, i have also this issue with the galaxy note 10.1 gt-n8020, its stucks on samsung logo and doesnt go any further...i dont have a custom firmware neither the tablet its rooted, i tried with odin having the original firmware but when i press start, after the msg "Start write to NAND" i get a FAIL and ends there. Even with the method mentioned here, still i get the FAIL msg...any Info on this on what might be the cause and maybe a possible fix?Can this be also hardware related malfunction?I cant go into recovery mode, only download mode works...

Thank you for the help, my Samsung note 10.1 note went on boot loop about a year ago , i tried so many different ways to flash it and nothing worked. finally got it working with your help.
only problem i encountered was wen i click on (AP, for custom recovery, such as philz.. or official rom..up to you.) it didnt allow me to put the downloaded file in so i used (i9300_repair_efs.tar)
and it worked..
THANK YOU

You Sir are a pinnacle of evolution! Stumbled on this thread by error while going trough history links in my browser and all of a sudden my brick turned to Galaxy Note 10.1!
Only note, I've used i9300_repair_efs.tar for AP like farhaanwireless suggested and device is restoring as I type this
Thanks a ton once more

Agyar said:
You Sir are a pinnacle of evolution! Stumbled on this thread by error while going trough history links in my browser and all of a sudden my brick turned to Galaxy Note 10.1!
Only note, I've used i9300_repair_efs.tar for AP like farhaanwireless suggested and device is restoring as I type this
Thanks a ton once more
Click to expand...
Click to collapse
Can you tell us exact steps you did? Because I am trying without success :\
Also another thing: the i9300_repair_efs.tar it's a rar and when extracted I get a directory with a .md5 file... Is that file that are you using?

Yes, that md5 was used.....
I've went completely by procedure described in first post, with exception of i9300_repair_efs change as mentioned. For that part, I've used latest Odin downloaded from Samsung web, and for bootloader, I've used Odin 3.05, just to be sure, since there is a button with "Bootloader" written on it

Stuck at Samsung Note 4 Logo

hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks

nemo0002253 said:
hello friends,
i tried to update my Note 4 (N910c) but it is now boot looping and i couldn't fix it. i tried to get into recovery but it is not. only odin mode. i flashed stock, cwm and twrp recoveries too. but non of them are working. but for the firmware i don't know the region of the phone, i bought it from ebay and it came from dubai. i really need help guys. i have tried all i know and non of it helped.
thanks
Click to expand...
Click to collapse
Download this all samsung recovery and flash via odin. Helped for me with bootloop.
https://www.dropbox.com/s/c3byn50jvboo7nv/All samsung recovery.tar?dl=0

Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.

nemo0002253 said:
Thank you @dewingerd for your reply.
I have tried the recovery and it is still stuck at the logo.
Click to expand...
Click to collapse
Install the latest verson of kies on you computer.
Then in kies under "Tools" choose "firmware upgrade and initialisation".
Then give you model number "SM-N910?", next give serial number of the phone (you can find that on the sticker behind the battery in your phone).
Then you get a message that the "device can be initialised to its original setting"
Press ok and ok again. Then put your phone in download mode and connect to the computer and press "start upgrade".

Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode

nemo0002253 said:
Not working @dewingerd
Kies doesnt detect my phone. Bt drivers are installed correctly. It only opens in downloading mode
Click to expand...
Click to collapse
Happened to me also 2 days ago.
Your mobile only can enter download mode ? but when u try to go to recovery or just power it , nothing happened , right ??

Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck

APCOtech said:
Well , do as @dewingerd said
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do

Ify2gen2 said:
I have done all you have stated here and still end up on the Samsung boot logo, i have flash a stock firmware from sammobile and my note 4 still ends up on the Samsung boot animation logo
please help i don't know what else to do
Click to expand...
Click to collapse
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?

APCOtech said:
Now , this is another case , as long as you can press power and the mobile starts up , showing the first logo , and next the animation , then this is no big problem .
just first tell me what is your note4 variant ? C F H ? can you root and install recovery ?
What happened to your mobile and resulted this ?
Click to expand...
Click to collapse
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.

Ify2gen2 said:
thank for your quick reply, my variant is n910c ans yes i can still install recovery. I upgraded from 5.0.1 to 5.1.1 poland using odin and everything works well. I flashed Googy N4 kernel using TWRP 2.8.1.1 and everything still works well. My problem began when I made a backup of my 5.1.1 stock rom and flash infinity rom which end up in bootloop. So I tried restoring my backup but whenever it got to DATA RESTORING it keeps failing and flashing back the 5.1.1 poland stock firmware through odin keeps ending up on the SAMSUNG boot animation screen.
Click to expand...
Click to collapse
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0

APCOtech said:
which version of googy kernel ?
Well whatever , TWRP 2.8.1.1 won't work with 5.1.1 bootloader , try TWRP 2.8.7.0
Click to expand...
Click to collapse
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?

Ify2gen2 said:
GoogyMax N4 v2.0. I have tried TWRP 2.8.7.0 but still the same.
After flashing stock firmware using odin, on my stock recovery i found this error
"E:failed to mount /efs (invalid argument)
dm-verity verification failed.......
need to check drk first......."
I have search through the internet but i can't get a clear picture of what it meant.
Does anyone has an idea of what it meant and how to resolve the error?
Click to expand...
Click to collapse
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.

APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
thanks i will give a try and post my feedback

APCOtech said:
Hi again ,
Looks like a locked phone and was unlocked in a wrong way or something like that.
read this thread , looks like the same problem.
in short , you need the 4 files firmware to be flashed via oden and as stated in page 2 there , you flash them without pit file.
You can find the 4-files firmware here but this is not 5.1.1 firmware , give it a try , if failed too , search for 5.1.1 4-files firmware.
here is another site but I do not really know if they are 4-files or the single file .
Good luck.
Click to expand...
Click to collapse
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.

Ify2gen2 said:
All methods on the links you pasted didn't work, however i have been able to resolve it using this method from this link below
http://www.youtube.com/watch?v=HVOOwZs-kwQ
thanks for your support and help.
Click to expand...
Click to collapse
You are welcome , what matters is your phone is back

APCOtech said:
You are welcome , what matters is your phone is back
Click to expand...
Click to collapse
yes my phone is back but not fully back. I am having a bad IMEI, phone is not registering on network and i have mistakenly delected my EFS backup........my bad!
Can i get a working EFS backup of the same phone model (n910c) and restore it on my note 4 n910c? will it restore back my IMEI?

APCOtech said:
Well , you should do as @dewingerd said carefully do these steps :
Initially you need to upgrade kies to the latest version (mine is : 3.2.15072_2) or this will fail cuz it failed with me the first time.
1) take of your battery , and write down your Serial number .
2) open kies first.
3) open mobile in download mode then connect it . KIES WILL NOT RECOGNIZE THE MOBILE
4) Choose : Tools >> Firmware upgrade and initialisation
5) Kies will ask you about your mobile name , TYPE : SM-N910C , ALL CAPITAL LETTERS OR KIES WILL NOT RECOGNIZE IT
6) if you did not type the name correctly , you will get a message that kies does not know this name , so start again , type SM-N910C
7) then you will get another box asks for your serial number , enter it (Not case sensitive).
8) Kies then will inform you that it is going to prepare the phone and download the firmware for your device and that you have to connect it in download mode.
9) unplug your mobile , plug it again and click start.
10) Now the process is going to take a while depending on your internet connection (downloading about 2GB), do not unplug the phone and do not allow your laptop/PC to sleep.
11) cautions that I read before : you better not connect or disable any usb devices during the process.
12) suddenly , you will hear you mobile starting up again , congratulations
Q: What about my data , apps and stuff ?
A: All is gone except for those on your External card , sorry , nothing can be done for that (May be you should remove your SDcard first just in case).
Good Luck
Click to expand...
Click to collapse
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.

vzaen said:
Hi APCOtech im trying to solve mine too.. But my device not suppotred with kies3.. Any suggestion?? My device SM-N910S
Thanks man.
Click to expand...
Click to collapse
Try to download the appropriate firmware with Samfirm_reborn0.3.6.2 you'll find on Github. Unpack the .zip and start as admin.
Insert full device name and region and additionally check "binary nature" box.
It should download the latest! ROM multiple file format from Samsungs servers directly, at least it did for all my 7 devices (just in case) before I rooted them.
BUT I know that for N910V nothing is found and don't know about S model.
KIES I never used as I read it sometimes conflicts with Odin.
If files are downloaded flash with Odin adding the different files in their input fields. (selve explaining names)

Failed root need help! Samsung galaxy note 3

Hello everyone,
2 days ago i tried rooting my friends phone using kingo root.
I know its a one-click root app and easy but it didnt work.
It got stuck at 40%, its when it powers on the phone to download mode.
unplugged the phone and removed battery, the phone booted normaly and everything on the phone was still intact and opperating normaly. ( glad it didnt write anything to the phone yet. )
So i adviced my friend there is an alternative way to do it (sorta) manualy and flash it with odin. I did it before on my own phone and of some friends but theres a higher chance of human errors. He agreed so we proceeded and i found a neat guide that walks us past this proces.
The guide can be found on ( cant post links yet): galaxynote3root dot com / galaxy-note-3-root / how-to-root-galaxy-note-3
Or found searching for this google: "galaxy note 3 root"
So i got all the necesary things, got the right files for the right model (sm-n9005) running on android 5.0 and started the proces.
Now in odin it didnt succeed and i dont really remember the exact message but it emidiately failed when it started to use the download mode. (i can use download mode but it stops when it starts sending)
at this point i couldnt use the recovery mode (volume up + home button + power button) but could use the download mode (volume down + home button + power button). it also didnt boot and gave an error that i needed to repair my firmware.
Now i knew i had to fix it and i read that i can go back to the official firmware from samsung using odin also.
So i head over to ( sammobile dot com ) and got the right firmware (Netherlands, Vodafone).
After getting the right firmware i started it and it failed again at the start of the download mode.
Odin gave an error about the EXT4 partitions. after some research i found out i needed to get a .PIT file that repartitions it for you while flashing. So i tried the PIT file for the SM-N9005 32GB, it didnt work... again an error....
I wasnt sure if its 32GB so i tried the 16GB PIT file also. this one gave another error.
So the errors were something like this :
16GB Error: whrong size
32GB Error: EXT4 102400 < 408600
My excuse for not the exact error, ill look it up later.
Thanks in advance for reading about my problem!
I really hope somebody knows whats whrong and how to fix it if it can be fixed.
Any help would be greatly appreciated!:fingers-crossed:

Which firmware/baseband version are you running

Did you use chainfire autoroot: https://download.chainfire.eu/352/CF-Root/CF-Auto-Root/CF-Auto-Root-hlte-hltexx-smn9005.zip ?

Try another Odin version
Sent from my SM-N900 using Tapatalk

[CARRIER UNLOCK][NOUGAT][Z3X] SM-J700P Galaxy J7 SPR BST VMU 7.1.1

You will lose ALL of your data upon performing this action! You have been warned!
You are responsible for ANY Damage done to your device.
If you do not have any knowledge about unlocking phones, this is NOT FOR YOU!
To unlock the Sprint, Boost Mobile, or Virgin Mobile Galaxy J7 (SM-J700P ON ANDROID 7.1.1 REV2 ONLY)
You will need to Download
Z3X Paid Subscription or Cracked Version - You will need to find the crack on your own and use at your OWN risk!
ODIN,
Combination File,
Stock Firmware
Put the phone into Download Mode - Press and HOLD - HOME + VOL UP + POWER until blue screen shows, then press VOL UP to continue.
Once in download mode, connect the phone to the computer and open up ODIN, place the COMBINATION FILE you downloaded earlier into the AP Slot in ODIN and press START. Once that is complete let the phone do its thing and boot up. Factory Reset the phone from settings!
Open Z3X and select J700P for the model and go to the UNLOCK Tab and press Unlock. The phone will reboot.
Once rebooted, go to the FLASH tab in Z3X, load the stock firmware into the PDA section of the flash interface. BEFORE you flash it, click the 3 periods ... next to the X on the right side of the PDA Slot, this will allow you to choose which files are flashed. UN-CHECK the MODEM.BIN from the stock firmware you are about to flash. YOU DONT WANT TO FLASH THE STOCK MODEM!!! UNLOCK WILL NOT WORK!
After flash is complete, it is done!!! Enjoy!
​

Will l you tell me how to carrier unlock my t mobile sm-j700t please

Thsnk you , but...
The link for the combination file is not working.
Please repost a working link.
Thank you for your time.
Sincerely appreciate the guide and the work put into it !!!

Please the combination site, is broken, I need these files..
Thank you very much for you tutorial.. you are a master..
Now my only problem is that the file COMBINATION.... the link don't work..
Please if you can, upload again these files, I'll be very greatefull.
Best Regard.

Hey the link for combination file is down anyone has it ?

Combination File
evoospeed said:
Hey the link for combination file is down anyone has it ?
Click to expand...
Click to collapse
I had to buy it from some shady middle eastern website but I found it.
Edit: Seems the rar file had a password. I'm trying to unlock it and see if it actually works before reposting.
Edit Edit: Fixed! https://minevolt.net/downloads/COMB..._REV00_user_mid_noship_MULTI_CERT.tar.md5.rar
Uploaded to my private webserver

S8 SM-G950U android 9 combination rom frp bypass help please

I have samsung galaxy s8 that I need to get passed the google frp lock. I bought the phone, but cant use it at all . When I open recovery mode it shows :
9/PPR1. 180610. 011 *** G950USQS7DTB3
I have followed previous threads and attempted the flash of a combination file thru odin, but every time I am receiving an error
I believe i am reading and understanding this correctly but its been a while, but the G95 # above would indicate bootloader 7? revision 3?
I attempted with combination file -- COMBINATION_FA70_G950U1SQU7ASK1 , i will attach screenshot of odin error. Please anyone, I would so greatly appreciate any help with this, i have been working on it for days... if you need any other info , I will reply ASAP of receiving notification. TY

Hello
Try useing patched odin 3.14
In recovery do foctory reset ..then go to download mod ..then flash combo file
..