Eonon GA9350b - Sound is dead after ECU replacement - Android Head-Units

Hey, I have changed my ECU on my E46 and my HU Eonon GA9350b also completely lost the sound. Everything works except the sound.
I have updated the MCU, the software, I also have checked all the wiring and I even replaced it with my old Pioneer and the sound works on it.
Does anyone have any idea what it might be?

Did you check the sound level in advanced setup? There are controls there to adjust the levels for.different sources. It might be called "Factory Settings".
I have a different model and couldn't get any sound out of mine. Adjusting those levels fixed it for me.
Sent from my Pixel 3 XL using Tapatalk

007matman said:
Did you check the sound level in advanced setup? There are controls there to adjust the levels for.different sources. It might be called "Factory Settings".
I have a different model and couldn't get any sound out of mine. Adjusting those levels fixed it for me.
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Hi 007matman, are you talking about the entry-level of sound in factory settings? If so, yes I did check them and all are above 0 (Image attached)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

Anyone Know How To Make A Sound When Adjusting The Volume?

Just got my wife a G4 Plus, and it's driving her nuts that when she adjusts the volume only a visual representation is given not an audible sound to let her know what the volume level is. I have the Moto X Pure and it's the same, so it must be a stock Android thing. Gravity Box doesn't even have an option for this (or maybe I missed it??), anyways anyone know how to make the volume "ping" when adjusting it?
annoyingduck said:
Just got my wife a G4 Plus, and it's driving her nuts that when she adjusts the volume only a visual representation is given not an audible sound to let her know what the volume level is. I have the Moto X Pure and it's the same, so it must be a stock Android thing. Gravity Box doesn't even have an option for this (or maybe I missed it??), anyways anyone know how to make the volume "ping" when adjusting it?
Click to expand...
Click to collapse
Custom roms have an option under Settings->Sounds->Other Sounds to do this. You could check if stock rom has the same menu option.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

LeeKooLuu 2 Din Radio - Changing MPH to KMH, upgrading Android and rooting the system

Hello guys,
I have bought this radio few months ago.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would like to change MPH for KMH somehow, it could be done by installing new software or changing launcher app as far as I know, but can't find proper files.
Also I would like to find a solution to root the system and delete Reversing Camera mode, when reversing gear on, because cutting the pink wire didn't help at all. It is connected via canbus.
ptakuwzl said:
Hello guys,
I have bought this radio few months ago.
I would like to change MPH for KMH somehow, it could be done by installing new software or changing launcher app as far as I know, but can't find proper files.
Also I would like to find a solution to root the system and delete Reversing Camera mode, when reversing gear on, because cutting the pink wire didn't help at all. It is connected via canbus.
Click to expand...
Click to collapse
Before asking people about things that are relatively new. I would suggest searching the comments in amazon. Also, play with the "settings" app. For my Chinese made version it's in settings>advanced>driving
Sent from my SM-N950U1 using Tapatalk

*Beginner Post* Asvegen/Joying/Hyundai HVAC questions

As a disclaimer, I am a total novice in the world of anything Android, so please have patience as I come from the Walled Garden of Cupertino. Anyway, I installed an Asvegen (the names they come up with, sheesh) branded unit in my 2015 Hyundai Genesis Coupe that I ordered from AliExpress. As far as I can tell, it is somehow related to Joying, as I can access the factory settings of the unit with with a Joying code. Getting any information from the seller/manufacturer is somewhat difficult because they are using translation software that doesn't always work right, making it difficult to understand. Also, with the time difference, I normally have to wait 12-24 hours for them to respond, in addition to 24-48 hours for an answer pertaining to a questions I have. I've searched here and tried other sources, but I've come up with nothing.
ANYWAY, this is turning into a long story.
It has, from what I can tell, an RZC Canbus decoder. They are telling me to use the IX45 Low Profile setting for the car type. I can see most of the settings for HVAC on screen, except for set temperature, which always shows 17°C, otherwise that all works. Is there any way changing a setting that I can see what temperature the HVAC is set to? And if so, can I change it to Fahrenheit, as I am a clueless American? I will include a photo of the HVAC display for reference.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

8227L YT9216BJ sound problem

Hi
I installed the head unit 8227L YT9216BJ.
I have some problem, when I turn on radio/music from default player/YouTube it's sounds good but when I play music from spotify/YouTube music it's lower and without bass, sounds bad.
Can someone help me?
Levgav91 said:
Hi
I installed the head unit 8227L YT9216BJ.
I have some problem, when I turn on radio/music from default player/YouTube it's sounds good but when I play music from spotify/YouTube music it's lower and without bass, sounds bad.
Can someone help me?
Click to expand...
Click to collapse
There is nothing wrong with your unit other than it's bad overall quality. The sound in these units is horrific, pure and simple. What people do is to mod these units (install different electronic components) and that way the sound can become really hi-end. Feel free to check out the video in my signature that will show what I mean.
You could also check out this guide that provides help on many improvements including the sound quality. Other cool things are how you can make the unit look.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

android headunit help needed

Hello all,
I installed a chinese headunit to my car (grand cherokee 2013 with premium sound system),i had to modify the wiring harness becuase the sound system only receives the front speakers and the amplifier in the car does the rest of the work, now everything works fine except call audio in carplay because it seems to use only the line coming out of the headunit to the back speakers, call audio on bluetooth works well.
i have tried everything possible in the available settings in the headunit but no luck to make the integrated carplay to use the line of the front speakers, carplay uses a built in app called car link 2.0 which doesnt have much settings to customize it.
i am considering rooting the system to gain more access to the settings, and hopefully find a work around, the attached image is the info of the headunit, it says android 13 but actually it is 8.1, i need help rooting it and i have no experience wahtsoever in android systems.
or if there is a work around this problem without rooting it, it would be a great help, i have tried all the possible solution that show up in google search and no luck.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Categories

Resources