i am looking for help getting a binary 7 combination file for for Galaxy s8 snapdragon if someone could help i would be greatful .(thnx in advance.)
shandell31 said:
i am looking for help getting a binary 7 combination file for for Galaxy s8 snapdragon if someone could help i would be greatful .(thnx in advance.)
Click to expand...
Click to collapse
https://drive.google.com/file/d/1-2j2E-KS63Y2rUYS9gfElqnBvpKNuw7h/view?usp=drivesdk
thank you hope this gets me a step closer to retreving a IMEI . i some how scrwed my EFS up mine is unkown along with a no sim and no sd and baseband . (lol)
shandell31 said:
thank you hope this gets me a step closer to retreving a IMEI . i some how scrwed my EFS up mine is unkown along with a no sim and no sd and baseband . (lol)
Click to expand...
Click to collapse
Please let me know how this works for you with your G950U1. It had problems on my phone, but it could be a problem with my hardware.
I noticed that after installing, the software is identified as G950U, and not G950U1. Not sure if that matters though.
ok i got this to work to get back to a working state but to no avail i still have no imei no matter how i try . i also do not have anything show up in the service menu or any other of the menus except a few . i do not have a original back up of the imei nor can i get it to stick in the efs folder . i am really lost at the moment. all in all i have really learned alot about this s8 . i have flashed just about every available firmware to this phone i have even had twrp on it but now it is at a stage that i am in dire need of some tru know how . i am stuck with the binary 7 as i understand there is no going back from which means only u or u1 firmware is available there is no other with the 7 binary that i have found it will not read a sim or sd . if anyone has some help to offer again i would be very grateful for it . and thanx in advance for any help thrown my way . ps i'm not afraid to screw this phone up any more than it already is i have recovered from soft and hard brick already so i'm pre-prepared lol.
shandell31 said:
ok i got this to work to get back to a working state but to no avail i still have no imei no matter how i try . i also do not have anything show up in the service menu or any other of the menus except a few . i do not have a original back up of the imei nor can i get it to stick in the efs folder . i am really lost at the moment. all in all i have really learned alot about this s8 . i have flashed just about every available firmware to this phone i have even had twrp on it but now it is at a stage that i am in dire need of some tru know how . i am stuck with the binary 7 as i understand there is no going back from which means only u or u1 firmware is available there is no other with the 7 binary that i have found it will not read a sim or sd . if anyone has some help to offer again i would be very grateful for it . and thanx in advance for any help thrown my way . ps i'm not afraid to screw this phone up any more than it already is i have recovered from soft and hard brick already so i'm pre-prepared lol.
Click to expand...
Click to collapse
Imei is stored in a partition called sec I believe. They are also certificate wrote to this device which means you can't just rewrite it. There is u u1 and w firmware all bit 7 for your device. as for twrp I believe you mean safestrap as we have locked boot loaders
Best thing I can say is flash the absolute latest try to get correct base band for whichever firmware. If not may need a professional imei service that can write cert based imei but we don't discuss that here on xda
Ok that info helps get me to another stage lol and yes I meant ss . I have it back now on the u firmware got it acknowledging sna xaa spr . I think the imei is in there somewhere but what baffles me most I have nothing showing up in the service menu and I cannot log into Samsung on it .I can log in on my J737V. But also aside said still not showing baseband ims not registered and it will not register in the update part of settings. I don't really know what caused all this .But anyways thanks for the info I will be going through the info you provided. The slot for the help . Oh and if anyone needs any thing for this devise chances are I got a lot of it lol.
Use phone with Visible
I'm trying to use this factory binary to transition my phone from SM-G950U1 to SM-G950U so that I can put Verizon firmware on it and use on Visible (Verizon MVNO). I downloaded the binary linked above and extracted the tar file, but when using ODIN 3.12.7, I get an error message when trying to load it to the phone (it just says success:0 failed:1).
nrkva said:
I'm trying to use this factory binary to transition my phone from SM-G950U1 to SM-G950U so that I can put Verizon firmware on it and use on Visible (Verizon MVNO). I downloaded the binary linked above and extracted the tar file, but when using ODIN 3.12.7, I get an error message when trying to load it to the phone (it just says success:0 failed:1).
Click to expand...
Click to collapse
Modded 3.13 it's what I use
TheMadScientist said:
Modded 3.13 it's what I use
Click to expand...
Click to collapse
Thank you so much! With the modded 3.13 I was able to load the binary 7 combination file and then subsequently load the latest Verizon firmware downloaded from samfirm. This allows the phone to be used on Visible. I really appreciate your help.
I'm not 100% sure but If you have combination firmware on your device, perform a factory reset with combination firmware it very well may rebuild your IMEI partition. I've read somewhere that the combination firmware does that if your do a factory reset with it. Factory reset is in the settings menu after you flash and run the combination rom(Factory Binary), whatever.
FalsAlarm said:
I'm not 100% sure but If you have combination firmware on your device, perform a factory reset with combination firmware it very well may rebuild your IMEI partition. I've read somewhere that the combination firmware does that if your do a factory reset with it. Factory reset is in the settings menu after you flash and run the combination rom(Factory Binary), whatever.
Click to expand...
Click to collapse
Dont know if it does that but it can fix a lot of problems. Doing what you've said
nrkva said:
Thank you so much! With the modded 3.13 I was able to load the binary 7 combination file and then subsequently load the latest Verizon firmware downloaded from samfirm. This allows the phone to be used on Visible. I really appreciate your help.
Click to expand...
Click to collapse
Where did you find the Canadian HOME_CSC for Bootloader v7?
Post a link soo
Will post a link to file I have to download .......
shandell31 said:
Will post a link to file I have to download .......
Click to expand...
Click to collapse
If it's the bit 7 combo I already did
---------- Post added at 06:50 PM ---------- Previous post was at 06:50 PM ----------
Corena said:
Where did you find the Canadian HOME_CSC for Bootloader v7?
Click to expand...
Click to collapse
It would be located in the bit 7 w firmwares
https://drive.google.com/open?id=1VyNY3KIn7qKtSn-G-3kV9oKEMIULp73Z
U7 combo
Corena said:
Where did you find the Canadian HOME_CSC for Bootloader v7?
Click to expand...
Click to collapse
https://drive.google.com/open?id=1VyNY3KIn7qKtSn-G-3kV9oKEMIULp73Z
FalsAlarm said:
I'm not 100% sure but If you have combination firmware on your device, perform a factory reset with combination firmware it very well may rebuild your IMEI partition. I've read somewhere that the combination firmware does that if your do a factory reset with it. Factory reset is in the settings menu after you flash and run the combination rom(Factory Binary), whatever.
Click to expand...
Click to collapse
https://drive.google.com/open?id=1VyNY3KIn7qKtSn-G-3kV9oKEMIULp73Z
U7 combo
SM-G950U combonation 7
https://drive.google.com/open?id=1VyNY3KIn7qKtSn-G-3kV9oKEMIULp73Z
shandell31 said:
SM-G950U combonation 7
https://drive.google.com/open?id=1VyNY3KIn7qKtSn-G-3kV9oKEMIULp73Z
Click to expand...
Click to collapse
Why are you gonna repost something I already have in the general section
Related
Somebody can send me the EFS partition please, i got a problem with Uknown IMEI and Baseband, please.
Or how can i fix it, i check the EFS carpet but it doesnt have anything and im currently searching for the .nv_data to maybe do a new one for mi phone.
Thank you all
Lollipop B0K3
BananaSplash said:
Somebody can send me the EFS partition please, i got a problem with Uknown IMEI and Baseband, please.
Or how can i fix it, i check the EFS carpet but it doesnt have anything and im currently searching for the .nv_data to maybe do a new one for mi phone.
Thank you all
Lollipop B0K3
Click to expand...
Click to collapse
If I'm not mistaken, the contents of that partition are unique to your phone. Restoring from someone else's won't work or help you.
Try using Odin to flash the BOK3 Factory Restore image. It will delete everything and reset your phone; provided you have a valid SIM card, the phone should then regenerate your IMEI
Yeah it should work, but no, it doesn't, and I heard that the information can be changed to build your own one.
Or can you tell me how to restore it in AP, CSC, BT? i alreade flashed it on AP but it doesn work.
BananaSplash said:
Or can you tell me how to restore it in AP, CSC, BT? i alreade flashed it on AP but it doesn work.
Click to expand...
Click to collapse
Are you sure you have a verizon S5?
You flashed this G900VVRU2BOK3_G900VVZW2BOK3_G900VVRU2BOK3_HOME.tar.md5 in odin in the AP section and it failed?
---------- Post added at 10:08 PM ---------- Previous post was at 10:00 PM ----------
here is the 16gb S5 pit file Load it in the PIT section then load the BOK3 tar image in the AP section make sure under options that repartion is checked. If it fails pull battery try again plug cable into different port on computer maybe try different cable. If it still fails you dont have a verizon s5
jrkruse said:
Are you sure you have a verizon S5?
You flashed this G900VVRU2BOK3_G900VVZW2BOK3_G900VVRU2BOK3_HOME.tar.md5 in odin in the AP section and it failed?
---------- Post added at 10:08 PM ---------- Previous post was at 10:00 PM ----------
here is the 16gb S5 pit file Load it in the PIT section then load the BOK3 tar image in the AP section make sure under options that repartion is checked. If it fails pull battery try again plug cable into different port on computer maybe try different cable. If it still fails you dont have a verizon s5
Click to expand...
Click to collapse
Yeah, im really sure, thats a lil bit weard that it doesnt work, i was tinking if i can downgrade to kitkat, what doy you think about it?
I already do that and install the pit and the firmware and then i realize that Odin its saying that is a Firmware update and no a restoration and when the s5 starter back like if it was an actualization.
BananaSplash said:
Yeah, im really sure, thats a lil bit weard that it doesnt work, i was tinking if i can downgrade to kitkat, what doy you think about it?
Click to expand...
Click to collapse
If you cant flash the above firmware then you can't flash anything verizon. Are you sure you dont have one of the Verizon partner phones as they take different firmware. What build does it say you have on the phone?
jrkruse said:
If you cant flash the above firmware then you can't flash anything verizon. Are you sure you dont have one of the Verizon partner phones as they take different firmware. What build does it say you have on the phone?
Click to expand...
Click to collapse
LRX21T.G900VVRU2BOK3
And if i pull the battery the model is G900V and on the back cover says Verizon 4G.
BananaSplash said:
LRX21T.G900VVRU2BOK3
And if i pull the battery the model is G900V and on the back cover says Verizon 4G.
Click to expand...
Click to collapse
Did you try the pit file and the tar image like I told you above
i think that i found the problem after read a lot of post and unkowing this, i´ve passing this like nothing but my phone isnt activated by verizon. there is a way to activate it without calling verizon or puting a verizon sim? im not currently living in US so i can buy a verizon sim card and activate it, -.- , so i have a s5 that i cant use, so i got a rock, right?
BananaSplash said:
i think that i found the problem after read a lot of post and unkowing this, i´ve passing this like nothing but my phone isnt activated by verizon. there is a way to activate it without calling verizon or puting a verizon sim? im not currently living in US so i can buy a verizon sim card and activate it, -.- , so i have a s5 that i cant use, so i got a rock, right?
Click to expand...
Click to collapse
That still doesnt address the fact you cant flash verizon official firmware
BananaSplash said:
i think that i found the problem after read a lot of post and unkowing this, i´ve passing this like nothing but my phone isnt activated by verizon. there is a way to activate it without calling verizon or puting a verizon sim? im not currently living in US so i can buy a verizon sim card and activate it, -.- , so i have a s5 that i cant use, so i got a rock, right?
Click to expand...
Click to collapse
If you don't have a SIM card in, you're not going to have any useful IMEI data. The SIM is what allows the phone to communicate with Verizon's network. What were you planning to do with a phone without activating it?
jrkruse said:
That still doesnt address the fact you cant flash verizon official firmware
Click to expand...
Click to collapse
Yeah i already flashed the stock, but i didnt even get a registration imei so that's why I can't get data and all of that's stuff. Did you know how to activate it without a Sim card.?
BananaSplash said:
Yeah i already flashed the stock, but i didnt even get a registration imei so that's why I can't get data and all of that's stuff. Did you know how to activate it without a Sim card.?
Click to expand...
Click to collapse
Verizon phones arent sim locked just put a sim in there
jrkruse said:
Verizon phones arent sim locked just put a sim in there
Click to expand...
Click to collapse
yeah but it need to be activated so if you haven´t activated the s5 can´t conect to the network or at least its what i read in some text, thats weard but im going to try tomorrow, and im going to tell you how it went.
thank you all :good:
BananaSplash said:
yeah but it need to be activated so if you haven´t activated the s5 can´t conect to the network or at least its what i read in some text, thats weard but im going to try tomorrow, and im going to tell you how it went.
thank you all :good:
Click to expand...
Click to collapse
Activation is done via sim not network. An activated sim is activated
jrkruse said:
Activation is done via sim not network. An activated sim is activated
Click to expand...
Click to collapse
yeah it doesnt even work, there have to a way to activate it, well i already install the pit and the official Tar.md5, but it doesnt work, did you know if i can downgrade to KitKat it should work, or not?
what do you think about this?
By lyriquidperfection
Recovering IMEI And Data Connection After Flashing WRONG Root Package Intended For I9300:
Make sure you have Samsung Kies or the Samsung USB Driver installed on your PC.
Download and Extract: Odin3 3.04.zip - 457.11 KB to your PC if you don't already have it.
Download and Extract: Param_Bin_I9305.zip - 612.14 KB to your PC.
With your Phone Switched Off, press and hold: 'VOL DN' + 'HOME' + 'POWER' to enter Download Mode.
Connect your phone to your PC via USB Cable and start Odin.
Check your phone is connected by seeing if a COM Port in a Blue box is present under ID:COM.
Press the 'PDA' Button and select the 'Param_Bin_I9305.tar.md5' file you extracted from the Zip Archive earlier.
Press the 'Start' Button and wait for it to finish flashing. If successful, you will see a Green Box with 'PASS!'.
Wait for your phone to reboot then go to your Dialer and press: *#06#. You should now see your IMEI and your Data Connection will be back.
but this is for an s3, and is talking about param_bin that should be tha NON-HLOS.bin, or i am wrong?
BananaSplash said:
yeah it doesnt even work, there have to a way to activate it, well i already install the pit and the official Tar.md5, but it doesnt work, did you know if i can downgrade to KitKat it should work, or not?
what do you think about this?
By lyriquidperfection
Recovering IMEI And Data Connection After Flashing WRONG Root Package Intended For I9300:
Make sure you have Samsung Kies or the Samsung USB Driver installed on your PC.
Download and Extract: Odin3 3.04.zip - 457.11 KB to your PC if you don't already have it.
Download and Extract: Param_Bin_I9305.zip - 612.14 KB to your PC.
With your Phone Switched Off, press and hold: 'VOL DN' + 'HOME' + 'POWER' to enter Download Mode.
Connect your phone to your PC via USB Cable and start Odin.
Check your phone is connected by seeing if a COM Port in a Blue box is present under ID:COM.
Press the 'PDA' Button and select the 'Param_Bin_I9305.tar.md5' file you extracted from the Zip Archive earlier.
Press the 'Start' Button and wait for it to finish flashing. If successful, you will see a Green Box with 'PASS!'.
Wait for your phone to reboot then go to your Dialer and press: *#06#. You should now see your IMEI and your Data Connection will be back.
but this is for an s3, and is talking about param_bin that should be tha NON-HLOS.bin, or i am wrong?
Click to expand...
Click to collapse
Dude I have no Idea what your doing. I9305.tar.md5 what is this this is not for the s5. I9305.tar.md5 This cam from nothing I gave you
jrkruse said:
Dude I have no Idea what your doing. I9305.tar.md5 what is this this is not for the s5. I9305.tar.md5 This cam from nothing I gave you
Click to expand...
Click to collapse
OK, firstly thanks for all your help.
-The Pit file that you give me I already flash it and it didnt work.
-I tried to flash the official firmware, and it didn't work.
-And already flash both of them together.
-I already tried with a Verizon SIM, and it didn't work.
-Already flash the modem and it didn't work.
And with the text that I put on the previous message, is from a guy that solve this but flashing a param_bin.
But in the s5 we dont have param.bin, but we have a NON-HLOS.bin.
So, I already have the same problem. I doesn't have the .nv_data.
And I'm currently Root in the BOK3 version. And I don't know what to do.
How did i know if i have a developers edition? that would change something?
Here is a backup of efs partition made by flashfire
View attachment 201602140727-RAW-LRX21T.G900VVRU2BOK3.zip
Hi i'm new to the forum,
Today i flashed a custom rom for my galaxy s7 edge SM-G935F and it installed the dual sim feature, now i have no signal and i cant do anything to delete the dual sim feature.
Tried already to flash stock and erased everything but still its on my phone.
Can someone help and tell me how to disactivate it ?
Thanks for every help !
you sure you have the right region ROM? try initializing your phone(formats everything) using samsung smart switch program on windows/mac
aj.bglr said:
you sure you have the right region ROM? try initializing your phone(formats everything) using samsung smart switch program on windows/mac
Click to expand...
Click to collapse
I have already formatted everything (data, system, factory reset etc...) in twrp and flashed the right rom for my phone with odin but the dual sim feature is still there and i don't have signal.
Smart Switch says that it doesnt support SM-G935FD for initializing and the strange thing is my phone is a SM-G935F not a SM-G935FD (duos) but i'm sure every rom i flashed was for galaxy s7 edge. So one of the roms i flashed changed my phone to SM-G935FD. Am i screwed ? Pls help
If my english is bad pls don't correct me my native language is not english and i'm not using google translate.
Hyruler said:
I have already formatted everything (data, system, factory reset etc...) in twrp and flashed the right rom for my phone with odin but the dual sim feature is still there and i don't have signal.
Smart Switch says that it doesnt support SM-G935FD for initializing and the strange thing is my phone is a SM-G935F not a SM-G935FD (duos) but i'm sure every rom i flashed was for galaxy s7 edge. So one of the roms i flashed changed my phone to SM-G935FD. Am i screwed ? Pls help
If my english is bad pls don't correct me my native language is not english and i'm not using google translate.
Click to expand...
Click to collapse
Download a G935F rom from samfirm or sammobile.com and flash it with odin.
antkalaitzakis96 said:
Download a G935F rom from samfirm or sammobile.com and flash it with odin.
Click to expand...
Click to collapse
Sadly it didn't work but at least you tried to help me ! thank you very much.
This is what i can't remove : http://i.imgur.com/qWwKwSd.png Never had this menu and i tried everything to remove it...
Hyruler said:
Sadly it didn't work but at least you tried to help me ! thank you very much.
This is what i can't remove : http://i.imgur.com/qWwKwSd.png Never had this menu and i tried everything to remove it...
Click to expand...
Click to collapse
If Odin didn't work download any 935f custom rom and flash it with TWRP. That's it ?
Anik49 said:
If Odin didn't work download any 935f custom rom and flash it with TWRP. That's it
Click to expand...
Click to collapse
I have wiped everything and installed superman rom with twrp but the dual sim feature didn't go away and still no signal... I appreciate that you tried to help me. Thanks
I don't know i think i bricked my phone....
Hyruler said:
Sadly it didn't work but at least you tried to help me ! thank you very much.
This is what i can't remove : http://i.imgur.com/qWwKwSd.png Never had this menu and i tried everything to remove it...
Click to expand...
Click to collapse
What odin version are you using?
And which firmware did you download?
antkalaitzakis96 said:
What odin version are you using?
And which firmware did you download?
Click to expand...
Click to collapse
Odin3 v3.12.3 and in Samfirm i have put in the model tab SM-G935F and in the Region tab my region code. And i noticed something i don't have an imei and s/n anymore on the phone... :/
I think your problem is with the imei itself which happened by flashing wrong csc in that firmware your flashed check http://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk
MustafaBarakat said:
I think your problem is with the imei itself which happened by flashing wrong csc in that firmware your flashed check http://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I did that already my friend and it didnt work... I think it has to do that my phone thinks i have 2 sim cards and 2 imeis which i never had thats why its bugged and i dont know how to deactivate the 2 sim card function.
Only for some info to you experts out there who want to help me i found out that in the king of nougat rom theres an option which says : "Stk2 - for dual sim variant" i think thats the option that bugged my phone can't i deactivate that with editing a file ? If you guys need more info about my phone i will give you everything just ask me.
Btw thanks for all you guys who tried to help me it gives me hope to recover my phone.
So you only have one correct imei in the imei information and second slot in unknown or you have no imei in both slots?
If you have on correct imei have you tried to turn of second sim card in sim card manager in setting?
Sent from my SM-G935F using Tapatalk
MustafaBarakat said:
So you only have one correct imei in the imei information and second slot in unknown or you have no imei in both slots?
If you have on correct imei have you tried to turn of second sim card in sim card manager in setting?
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Both slots no imei and i cant turn off the second sim its already turned off. Here a picture : http://i.imgur.com/2cX9TnI.png
Did You flash only AP in odin or all files including CP, BL, CSC?
You should flash all of them.
ProtoDeVNan0 said:
Did You flash only AP in odin or all files including CP, BL, CSC?
You should flash all of them.
Click to expand...
Click to collapse
I have flashed all of them BL, AP, CP, CSC.
Hyruler said:
I have flashed all of them BL, AP, CP, CSC.
Click to expand...
Click to collapse
That's weird. But You could try flashing G935F firmware through odin with pit file. Maybe that would help.
ProtoDeVNan0 said:
That's weird. But You could try flashing G935F firmware through odin with pit file. Maybe that would help.
Click to expand...
Click to collapse
Okay downloading pit file right now i'll tell you if it worked. Yeah for me its also very weird normally it should go away with wiping everything but it didn't.
So now i have flashed the pit file and its still not working.
Hyruler said:
Okay downloading pit file right now i'll tell you if it worked. Yeah for me its also very weird normally it should go away with wiping everything but it didn't.
So now i have flashed the pit file and its still not working.
Click to expand...
Click to collapse
Flash back to the G935F ROM of your region, and take your phone over to a repair store, give them the IMEI of your phone and the S/N (they'll be written on the box), and tell them to re-flash them. It seems your EFS partition has gone corrupt, when you flashed the wrong file.
I know how you feel, I did the same thing with a phone of mine once, I felt like crap afterwards, don't worry about it. This kinda sh*t happens to all of us. Just be glad nothing else happened and the other hardware still functions correctly.
Good luck bro, and be more careful next time when flashing.
murtaza02 said:
Flash back to the G935F ROM of your region, and take your phone over to a repair store, give them the IMEI of your phone and the S/N (they'll be written on the box), and tell them to re-flash them. It seems your EFS partition has gone corrupt, when you flashed the wrong file.
I know how you feel, I did the same thing with a phone of mine once, I felt like crap afterwards, don't worry about it. This kinda sh*t happens to all of us. Just be glad nothing else happened and the other hardware still functions correctly.
Good luck bro, and be more careful next time when flashing.
Click to expand...
Click to collapse
Thanks for the advice and the good luck bro !
I don't know can't they see that i rooted and flashed custom firmwares on my phone ? It's so sad just because of 1 tiny mistake i have to bring the phone to a repair store... :/
I still hope some expert knows how to fix this. Thanks to all for helping me trying to fix this dumb mistake i made i deeply appreciate it !
Hyruler said:
Thanks for the advice and the good luck bro !
I don't know can't they see that i rooted and flashed custom firmwares on my phone ? It's so sad just because of 1 tiny mistake i have to bring the phone to a repair store... :/
I still hope some expert knows how to fix this. Thanks to all for helping me trying to fix this dumb mistake i made i deeply appreciate it !
Click to expand...
Click to collapse
Technically you can fix it, but you'd require some specialist tools that cost a somewhat hefty amount and usually the only people who keep them are phone repair stores.
No matter how much of an expert one can be, without an EFS backup, you can't restore your IMEI. In older phones like the GS4, if your IMEI was wiped with a bad flash, flashing the modem twice and doing a hard reset would bring it back, unfortunately it's not that easy now.
Anyway, mistakes happen bro. Don't worry too much about it. It's annoying to go to a phone store, but just remember, it'll be a lesson in the future for us all. Always make a backup before flashing, anything goes wrong, restore the backup and you'll be safe.
Samsung service center will be able to see that KNOX is void and it's 0x1, so they might charge extra.
For ordinary phone repair or software specialist stores, they won't really care whether it's rooted or not, they'll just use their tool to flash the IMEI and S/N back to your phone.
I couldn't find the correct thread to upload this, its a newer model of the J700P it could be from Sprint or Boostmobile either way here is the stock odin firmware i seen it in the Samsung kitchen so why not share it
This is Nougat firmware
AP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT_meta.tar.md5
BL_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_J727PSPT1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120715469
Note:
This is either for Sprint or Boostmobile
Has anyone used this???
Sent from my SM-J727P using XDA-Developers Legacy app
JeepinxJosh said:
Has anyone used this???
Sent from my SM-J727P using XDA-Developers Legacy app
Click to expand...
Click to collapse
yes, quite afew times
will this work for Virgin mobile as well? I haven 't had a need yet...but knowing meeee...eventually.
Worked for my VM version of the phone. I think the phone sets itself from the network(Sprint, Boost, Virgin) when you activate it.
Very well ,Confirmed Works on boost mobile only method. helps me get off or bypass screen massage Blocked by FRP ,flashed with Odin thanks
Thank you very much! Also for the confirmation it works..... (i did hit the thanks button)
Downloading now,....... Just got this device due to a insurance claim so this is a completelt new phone to me and I really want to either start or add to one specific form till we get a complete spot on the fourms.... Any way my ideal or a good ideal for us is to add everthing that is confirmed working as on today and add it to one fourm and reserve like 10 entrys for specific problems and the solutions. Or just in a easy format so everything is not so confusing till we get our device a Fourm started instead of a thread thats confusing and hard to follow.... Anyone with me???? Its a new device and we need development so bad.. im stuck in a bootloop as of now and cant find the info to help me and its so aggervating.... someone will have to maintain it of course
---------- Post added at 09:01 PM ---------- Previous post was at 08:33 PM ----------
quick question...... downloaded the stock firmware but not sure about something....
do I add every file to odin or just the AP file??? or what? cause im use to just flashing in the AP spot in odin. Do I just load the AP REPAIR file i downloaded in the zip file? or do I add all files to odin??? Im alil confused.... PLEASE AND THANK YOU FOR THE HELP
just never really had to flash any other files but the AP slot....
Easy instruction would be very helpfull please
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
still getting error
XxTeXx07xX said:
Thank you very much! Also for the confirmation it works..... (i did hit the thanks button)
Downloading now,....... Just got this device due to a insurance claim so this is a completelt new phone to me and I really want to either start or add to one specific form till we get a complete spot on the fourms.... Any way my ideal or a good ideal for us is to add everthing that is confirmed working as on today and add it to one fourm and reserve like 10 entrys for specific problems and the solutions. Or just in a easy format so everything is not so confusing till we get our device a Fourm started instead of a thread thats confusing and hard to follow.... Anyone with me???? Its a new device and we need development so bad.. im stuck in a bootloop as of now and cant find the info to help me and its so aggervating.... someone will have to maintain it of course
---------- Post added at 09:01 PM ---------- Previous post was at 08:33 PM ----------
quick question...... downloaded the stock firmware but not sure about something....
do I add every file to odin or just the AP file??? or what? cause im use to just flashing in the AP spot in odin. Do I just load the AP REPAIR file i downloaded in the zip file? or do I add all files to odin??? Im alil confused.... PLEASE AND THANK YOU FOR THE HELP
just never really had to flash any other files but the AP slot....
Easy instruction would be very helpfull please
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
OK, so i flashed all 4 files in odin with my Boost mobile samsung galaxy SM-J727P and im still getting an error...im stuck in boot loop as well.someone please help. thanks
Does anyone knows if it's possible to unlock it with Z3X?
The extra csc file or the other so file named home-ap
AtlasTheGod said:
OK, so i flashed all 4 files in odin with my Boost mobile samsung galaxy SM-J727P and im still getting an error...im stuck in boot loop as well.someone please help. thanks
Click to expand...
Click to collapse
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
I have followed all steps. I am using the J727p for boost. It turned on loaded up normally for me then when I restarted the phone it is now stuck in a boot load it gets to the Samsung screen then shuts off and repeats.
XxTeXx07xX said:
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
What build were you on when flashed it ???
If you were on J727PVPU2AQI3 YOUR STUCK TILL YOU GET THE NEW FIRMWARE FILE !!
JUSMEJOSE said:
I couldn't find the correct thread to upload this, its a newer model of the J700P it could be from Sprint or Boostmobile either way here is the stock odin firmware i seen it in the Samsung kitchen so why not share it
This is Nougat firmware
AP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT_meta.tar.md5
BL_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CP_J727PVPU1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
CSC_SPT_J727PSPT1AQB9_REPAIR_user_low_ship_MULTI_CERT.tar.md5
https://www.androidfilehost.com/?fid=745425885120715469
Note:
This is either for Sprint or Boostmobile
Click to expand...
Click to collapse
this fixed my blinking:
rpmb provisioned ...pink
rpmb fuse: 1 ...yellow
recovery booting ...blue
This does not work. I've tried it multiple times on multiple versions of Odin. This will not work if you use Boost Mobile. It either fails, hangs at flashing boot.img, or hangs at SetupConnection.
Galaxy J727P
spc_hicks09 said:
This does not work. I've tried it multiple times on multiple versions of Odin. This will not work if you use Boost Mobile. It either fails, hangs at flashing boot.img, or hangs at SetupConnection.
Click to expand...
Click to collapse
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
https://www.androidfilehost.com/?w=files&flid=244089
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
https://www.androidfilehost.com/?w=files&flid=244089
Click to expand...
Click to collapse
Thank you, I will try them now and see what happens.
XxTeXx07xX said:
Flash the home ap file I believe instead....
You see the file?
UPDATE UPDATE
I just went ahead and added all dled files in the folder to Odin and everythings good! Thanks again
FLASH ALL FILES
Click to expand...
Click to collapse
Anyone have any luck with these? I'd really like to bypass frp on this
spc_hicks09 said:
Thank you, I will try them now and see what happens.
Click to expand...
Click to collapse
So do you have any luck? trying to get stock firmware on my device to bypass FRP boot.img error
Almost bricked...and then this post saved my friggin day!
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
This works to get you back to stock from bootloop. I tried my hand at rooting this little SOB (TWRP,Magisk) and tripped the Knox counter bc I forgot to wipe it. Reboot came up with "Validation Failure" and I was stuck. I stumbled over this post and with nothing to lose other than $130.
First piece of advice...Use Odin 3.12.3 ONLY!! I tried the latest version and it didn't work. Download the files, place them in the appropriate boxes and flash. reboot into recovery, wipe the cache/data and you should be good. Mine took quite a while after hanging on the Boost mobile splash screen, but about 3 reboots later, it brought me to the configuration screen. It's up, running and I even got the OTA software update, but then again, it is stock.
Click to expand...
Click to collapse
J727P
ListlessSpectre said:
peter couniaz said:
Here try these four file ! Don't use the fifth file if your not on Sprint it not needed in most cases !
This works to get you back to stock from bootloop. I tried my hand at rooting this little SOB (TWRP,Magisk) and tripped the Knox counter bc I forgot to wipe it. Reboot came up with "Validation Failure" and I was stuck. I stumbled over this post and with nothing to lose other than $130.
First piece of advice...Use Odin 3.12.3 ONLY!! I tried the latest version and it didn't work. Download the files, place them in the appropriate boxes and flash. reboot into recovery, wipe the cache/data and you should be good. Mine took quite a while after hanging on the Boost mobile splash screen, but about 3 reboots later, it brought me to the configuration screen. It's up, running and I even got the OTA software update, but then again, it is stock.
Click to expand...
Click to collapse
You may want to look at this link if you haven't already the last Rom there is my daily drive but you should read threw it let me know if you need any help !
https://forum.xda-developers.com/galaxy-j7/development/updated-tweaked-deodexed-rom-galaxy-t3773219
Click to expand...
Click to collapse
Hello guys!
I have a big problem with my S7 edge (G935F)... The problem begins when I forget to turn off the OEM security and then I did an update to my Magisk root... When I tried to reboot my phone it doesn't pass of the first logo image, meaning that I broke the "security", so I read about that and then I flashed a firmware, an official UK (BTU I guess) firmware and then I flashed TWRP via Odin to restore a nandroid that I did when I bought my phone... It restored the EFS partition/folder and when my phone reboots I had no network signal, no IMEI... I just tried everything (I hope not) and I can't give back my IMEI and my network signal... When I try to patch the certificate to recover my IMEI via Odin in the download mode it says: SW REV. CHECK FAIL. DEVICE:2. Binary:1
I don't know if I explained it because my english is too bad, but I tried, I know that someone else have the same problem than I because I saw it. Do you find the solution? I'm out of my country and I need it so much :crying:
Regards!
Flash latest stock with csc, but skip bl section
amakuramio said:
Flash latest stock with csc, but skip bl section
Click to expand...
Click to collapse
Thank you for answer me.
I did it with three diferent stock firmwares and the problem persists (no network signal) I think that is something with the EFS folder, I restored a backup of it but is the same, I have not signal yet, but thank you!
Try clean formatting
Arachnorbit said:
Thank you for answer me.
I did it with three diferent stock firmwares and the problem persists (no network signal) I think that is something with the EFS folder, I restored a backup of it but is the same, I have not signal yet, but thank you!
Click to expand...
Click to collapse
Hey brother it happened with me too, unfortunately, I had to format my internal storage to fix this, you need to flash the latest nougat firmware via odin with csc including bl and modem and then start in recovery then format and start phone, remember you would need to put the google account which was previously there in the phone to unlock and complete setup process (very important here)
invinsible_asp said:
Hey brother it happened with me too, unfortunately, I had to format my internal storage to fix this, you need to flash the latest nougat firmware via odin with csc including bl and modem and then start in recovery then format and start phone, remember you would need to put the google account which was previously there in the phone to unlock and complete setup process (very important here)
Click to expand...
Click to collapse
Thank you! Do you know which Firmware I need to flash? Because I flashed a lot of firmwares and it didn't work! You would help me a lot if you give me the name of the one you used.
Here I have some screenshots of what appears in IMEI and SIM.
Try this thread :
https://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk
Arachnorbit said:
Thank you! Do you know which Firmware I need to flash? Because I flashed a lot of firmwares and it didn't work! You would help me a lot if you give me the name of the one you used.
Here I have some screenshots of what appears in IMEI and SIM.
Click to expand...
Click to collapse
Download the latest firmware from https://updato.com (it's fast and reliable) then start in download mode, run odin with administrative privileges, select BL AP Modem and CSC (dont use home since we wish to clean fornat), and in odin uncheck auto reboot option, after the ODIN shows 'pass', disconnect the cord from pc, now you have to be very quick here since our battery is not removable, in order to shut down s7 edge from odin mode, all you have to do is press, volume down, volume up, home and power and as soon as it goes off connect the cord, the battery will show up and now it will be in charging state, after that disconnect the cord, (the phone is now clean fornatted and in off stage) and now boot into recovery to wipe data and cache using default recovery, then reboot phone and then log into your existing google account.
I know its tricky and maybe there's an ez way around it but this worked for me so I'm sharing
SOLUTION, thank you all for your answers!
AndyBury said:
Try this thread :
https://forum.xda-developers.com/showthread.php?t=3379516
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I tried it at first instance but I could not because my Bootloader was updated to the "U2" version, what I did after that was search the Combination file updated to the U2 bootloader, after a long search I found it.
In resume, The solution is what the OP of that thread says but if you have the same problem like me with the Updated bootloader you need this file instead of the files that are shown there:
https://androidfilehost.com/?fid=890129502657582963
Thank you all! I hope this can help y'all that has this problem! :fingers-crossed:
i am same problem ,how to fix it?
help me
jed0123 said:
help meView attachment 4491615
Click to expand...
Click to collapse
You already fixed the problem I guess, you only need to flash the same firmware that your phone had before flashing the Combination file.
can not
Help
How to know what was my old firmware version? when I try to flash i get SW REV. CHECK FAIL. DEVICE: 2. Binary: 1
And I can't start phone because I'm getting FRP lock. Please help me?
Edit: I downloaded latest firmware and flashed it.
Same problem with s8+
amakuramio said:
Flash latest stock with csc, but skip bl section
Click to expand...
Click to collapse
I have the same problem with my S8+ SM-G955F
I flashed the latest firmware without BL....now my phone is working fine...but I dont have SIGNAL.. any help will be appreciated..
Moved
Thread moved to Questions and Answers.
hello.
im having the exactly same issue....
Im from Brazil, i was trying to install the stock rom then ill upgrade to android 8.0....(my android does not update becouse it from VIVO PROVIDER, my english sucks...hope you understand)
i open odin, select all files, of a stock rom ZTO G935F, then it just give me this error...
how can i fix it? i just want to install android 8.0 nougat =(
thx alot for trying help me!!!
i fixed my phone by skipping the booloader section...
you're a life saver brother...
Thank you
Regards
Arachnorbit said:
Hello guys!
I have a big problem with my S7 edge (G935F)... The problem begins when I forget to turn off the OEM security and then I did an update to my Magisk root... When I tried to reboot my phone it doesn't pass of the first logo image, meaning that I broke the "security", so I read about that and then I flashed a firmware, an official UK (BTU I guess) firmware and then I flashed TWRP via Odin to restore a nandroid that I did when I bought my phone... It restored the EFS partition/folder and when my phone reboots I had no network signal, no IMEI... I just tried everything (I hope not) and I can't give back my IMEI and my network signal... When I try to patch the certificate to recover my IMEI via Odin in the download mode it says: SW REV. CHECK FAIL. DEVICE:2. Binary:1
I don't know if I explained it because my English is too bad, but I tried, I know that someone else has the same problem than I because I saw it. Do you find the solution? I'm out of my country and I need it so much :crying:
Regards!
Click to expand...
Click to collapse
try custom ROMs and I'm sure they have update bootloader and modem use that and its work in my phone
jed0123 said:
can notView attachment 4491806
Click to expand...
Click to collapse
Hello, how did you solve it?
Help I keep getting SW REV. CHECK FAIL. DEVICE:3. BINARY:2 when trying to downgrade BL CP for G935W8
Hi All,
I brick my SM-N9860, after playing with changing csc on TGY firmware I got to situation that my phone doesn't boot to system and I have FRP lock. Its stuck on download mode (attached pics).
Factory reset in recovery mode doesn't work and I cant flash new firmware with odin because of FRP lock.
Maybe some can help how can I resolve this issue?
I tried to flash combination file with pit file but I get error that there is a FRP lock. I wanted to try the option in recovery "Apply update with adb" but I cant find OTA file for SM-N9860.
From what I understood there is some boxes and dongles like Octoplus Pro Box that can reflash the phone and remove the FRP lock but maybe there is a solution easier than this that works with odin??
The problem is to make my phone to boot, than I could remove the FRP lock because my problem not the google credentials only that it not boot up after factory reset...
chetbiz said:
Hi All,
I brick my SM-N9860, after playing with changing csc on TGY firmware I got to situation that my phone doesn't boot to system and I have FRP lock. Its stuck on download mode (attached pics).
Factory reset in recovery mode doesn't work and I cant flash new firmware with odin because of FRP lock.
Maybe some can help how can I resolve this issue?
I tried to flash combination file with pit file but I get error that there is a FRP lock. I wanted to try the option in recovery "Apply update with adb" but I cant find OTA file for SM-N9860.
From what I understood there is some boxes and dongles like Octoplus Pro Box that can reflash the phone and remove the FRP lock but maybe there is a solution easier than this that works with odin??
The problem is to make my phone to boot, than I could remove the FRP lock because my problem not the google credentials only that it not boot up after factory reset...
Click to expand...
Click to collapse
Any one??
chetbiz said:
Any one??
Click to expand...
Click to collapse
Change the cable
Sent from my SM-F916B using Tapatalk
---------- Post added at 08:49 PM ---------- Previous post was at 08:47 PM ----------
I had the same problem
I change the cable and working on
Sent from my SM-F916B using Tapatalk
adeltamimy6 said:
Change the cable
Sent from my SM-F916B using Tapatalk
---------- Post added at 08:49 PM ---------- Previous post was at 08:47 PM ----------
I had the same problem
I change the cable and working on
Click to expand...
Click to collapse
Thanks) I wish it was just a cable..)
Try to look in maybe s20 ultra or s20 forum, they was released earlier and perhaps someone has already had this problem and solved it.
chetbiz said:
Any one??
Click to expand...
Click to collapse
Why don't you just put your Samsung account and password in? Because that's what you need to do in order to turn off the frp.. If you're going to tell us you don't know the Samsung user account and password that's only going to make us think the phone is stolen because that's basically what frp is meant to do block people from using it or doing updates or factory resetting it to try to remove the frp.. All you need is your Samsung account and password..
MrMike2182 said:
Why don't you just put your Samsung account and password in? Because that's what you need to do in order to turn off the frp.. If you're going to tell us you don't know the Samsung user account and password that's only going to make us think the phone is stolen because that's basically what frp is meant to do block people from using it or doing updates or factory resetting it to try to remove the frp.. All you need is your Samsung account and password..
Click to expand...
Click to collapse
Man are you serious?! I told you the problem not that I cant put my google or samsung credentials.. THE PHONE doesn't boot to the system at all can you understand this?! You can find me in another tread where I tried for cople weeks with guys from this forum to make our phone to work with native call record and reflash it many times with difrent firmware( CHC, TGY) and only one time I forgot to delete my google and samsung account before reflashing. So please dont tell me what you think, if you cant contribute to resolving and helping dont comment like you know something about me.
chetbiz said:
Man are you serious?! I told you the problem not that I cant put my google or samsung credentials.. THE PHONE doesn't boot to the system at all can you understand this?! You can find me in another tread where I tried for cople weeks with guys from this forum to make our phone to work with native call record and reflash it many times with difrent firmware( CHC, TGY) and only one time I forgot to delete my google and samsung account before reflashing. So please dont tell me what you think, if you cant contribute to resolving and helping dont comment like you know something about me.
Click to expand...
Click to collapse
Can you do me a favor with a patched version of Odin or just try multiple different Odin versions and flash only the CSC, AP and BL. and yes this is going to factory reset it probably but at least you might have the phone back.. Is this an unlocked bootloader phone btw? Edit: Make sure you're flashing the correct BL AP and CSC that the phone originally came with. Edit: Can you tell me what the last firmware was that you had on it?
MrMike2182 said:
Can you do me a favor with a patched version of Odin or just try multiple different Odin versions and flash only the CSC, AP and BL. and yes this is going to factory reset it probably but at least you might have the phone back.. Is this an unlocked bootloader phone btw? Edit: Make sure you're flashing the correct BL AP and CSC that the phone originally came with. Edit: Can you tell me what the last firmware was that you had on it?
Click to expand...
Click to collapse
I will try it, the phone is unrooted and with locked bootloader like it came from factory with no knox tripped. The last firmware that I was is "SM-N9860_20201112_TGY_N9860ZSU1BTJ9-N9860OZS1BTJ9-N9860ZCU1BT"
but the modification that I made was with SamKEY changed the CSC to CHC and after that flashed CHC csc file with odin, so in settings I had region CHC,CHC/CHC,TGY
Thanks for help
chetbiz said:
I will try it, the phone is unrooted and with locked bootloader like it came from factory with no knox tripped. The last firmware that I was is "SM-N9860_20201112_TGY_N9860ZSU1BTJ9-N9860OZS1BTJ9-N9860ZCU1BT"
but the modification that I made was with SamKEY changed the CSC to CHC and after that flashed CHC csc file with odin, so in settings I had region CHC,CHC/CHC,TGY
Thanks for help
Click to expand...
Click to collapse
Flash just the CSC, AP and BL of the firmware version N9860ZSU1BTJ9 if that doesn't work then try flashing the CSC, AP and BL from the firmware version N9860ZSU1ATGM and see if that works..
chetbiz said:
I will try it, the phone is unrooted and with locked bootloader like it came from factory with no knox tripped. The last firmware that I was is "SM-N9860_20201112_TGY_N9860ZSU1BTJ9-N9860OZS1BTJ9-N9860ZCU1BT"
but the modification that I made was with SamKEY changed the CSC to CHC and after that flashed CHC csc file with odin, so in settings I had region CHC,CHC/CHC,TGY
Thanks for help
Click to expand...
Click to collapse
Hi Chetbiz,
On your original thread, I did mention a ”patched” version of ODIN, I thought you already tried it. I guess not...
So there is still chance [emoji848].
Sent from my SM-N9860 using Tapatalk
fjorger said:
Hi Chetbiz,
On your original thread, I did mention a ”patched” version of ODIN, I thought you already tried it. I guess not...
So there is still chance [emoji848].
Click to expand...
Click to collapse
Hi fjorger)
I tryed with patched odin yesterday, what I didn't try is to flash only 3 files, AP, BL, CSC.. so I'll try it tomorrow evening after I'll get my phone back from technician hopefully he we'll succeed but I'm doubt it...
Thanks)
Got my phone back from technician, they didn't success to reflash it, I tried to flash firmware with patched odin and only BL, AP, CSC same here, error cant download pit file because of frp lock...
chetbiz said:
Got my phone back from technician, they didn't success to reflash it, I tried to flash firmware with patched odin and only BL, AP, CSC same here, error cant download pit file because of frp lock...
Click to expand...
Click to collapse
From what I understand I need Binary 4 file to unlock frp lock, maybe some one knows something about this file and if we got one anywhere?
I have never heard about it before, sorry
You may have to bite the bullet and send back to Samsung and have them reset the phone to original factory condition. It may cost some money, but better that than not having a phone at all -- a lot less than buying a new note for sure.
If you can't get it to flash on your own, I think that is your only option.
One quick thought - have you tried to turn off the phone and then boot back into Download mode? if not, try holding power and volume down until screen turns off - and when it is still off -quickly plug the USB cord into your phone. This will (should) force download mode - if it works - click volume up and then use Odin to try to flash the last firmware file you have (try all four files)
I don't know if this will help or make a difference, but if you haven't already tried this - it may work for you.
Good luck....
Geekser said:
You may have to bite the bullet and send back to Samsung and have them reset the phone to original factory condition. It may cost some money, but better that than not having a phone at all -- a lot less than buying a new note for sure.
If you can't get it to flash on your own, I think that is your only option.
One quick thought - have you tried to turn off the phone and then boot back into Download mode? if not, try holding power and volume down until screen turns off - and when it is still off -quickly plug the USB cord into your phone. This will (should) force download mode - if it works - click volume up and then use Odin to try to flash the last firmware file you have (try all four files)
I don't know if this will help or make a difference, but if you haven't already tried this - it may work for you.
Good luck....
Click to expand...
Click to collapse
Yes I think too that sending back to seller is my only option, I'm trying to connect with him, I bought on ebay, the problem he's doesn't answering me.
About download mode of course I entered the download mode after he was turned off. Nothing works, the strange thing that its fails to flash the latest tgy firmware, there I dont have an error about pit file or frp lock but its still failes on AP file when trying to write super.img... So I don't know what the solution for that, maybe in next firmware version it
will succeed
chetbiz said:
Yes I think too that sending back to seller is my only option, I'm trying to connect with him, I bought on ebay, the problem he's doesn't answering me.
About download mode of course I entered the download mode after he was turned off. Nothing works, the strange thing that its fails to flash the latest tgy firmware, there I dont have an error about pit file or frp lock but its still failes on AP file when trying to write super.img... So I don't know what the solution for that, maybe in next firmware version it
will succeed
Click to expand...
Click to collapse
You probably already tried this - but just in case, go to this link and download the most recent PATCHED Odin -
Then get several different USB Cords - Samsung Original is usually the best - but get different cords just the same -
then try to flash all four files in that patched odin - if it fails, close odin - open it again and reload the files and try again using a different USB Cord.
I believe that if you keep trying, you will eventually get it to work...
By the way, If you can't get the Seller to do the right thing - contact SAMSUNG Support and arrange to send it back to them. They may charge you (Probably around $100 or so I think) but they can definately help you get it working again.
Hope that helps - Good Luck.
Tried to flash the latest firmware N9860ZSU1BTK3 but still stuck on writing super.img in odin
Don't know what to do
chetbiz said:
Tried to flash the latest firmware N9860ZSU1BTK3 but still stuck on writing super.img in odin
Don't know what to do
Click to expand...
Click to collapse
super.img is from AP. Try to flash the build that was working on your phone before the issue happened, but without the AP.