Hello,
after doing a clean install because of previous problems (dual sim not working) my device is now missing fonts. I can't see any emoji and some symbols.
I was able to fix the emojis by installing some as Magisk module but I'm unable to find symbol fonts.
See me attachment as reference. Normally there should be to arrows pointing away from English like this: < English >
If someone could provide me with the missing fonts, I would greatly appreciate it.
What version of Magisk are you using?
Use the current stable version. Some versions mess up OOS 10
davemuir said:
What version of Magisk are you using?
Use the current stable version. Some versions mess up OOS 10
Click to expand...
Click to collapse
Version 20.1.
I had the fonts missing before, just installed Magisk to have a replacement font.
Sent from my OnePlus 6T using XDA Labs
Have you used oos fastboot version to install android 10? if yes, follow these steps (even if not, this method will mostly work!)
i had the same problems.
Steps:
-download 10.0.x version of OTA rom
- go to local upgrade
- install the downloaded OTA update from there.
it will fix all the font, emoji related problems.
nousernamesorry said:
Have you used oos fastboot version to install android 10? if yes, follow these steps (even if not, this method will mostly work!)
i had the same problems.
Steps:
-download 10.0.x version of OTA rom
- go to local upgrade
- install the downloaded OTA update from there.
it will fix all the font, emoji related problems.
Click to expand...
Click to collapse
Thanks, I will try this tomorrow.
Sent from my OnePlus 6T using XDA Labs
You're missing the reserve img partition after You've clean flashed..( wiped data )
Flash dirty your rom or flash the reserve partition magisk module to get fonts back
cultofluna said:
You're missing the reserve img partition after You've clean flashed..
Flash dirty your rom or flash the reserve partition magisk module to get fonts back
Click to expand...
Click to collapse
You should make a thread for this magisk module or at least a "how to" with a link. If have seen you answer this question so many times. I think twice for me alone, lol :crying:
Scott said:
You should make a thread for this magisk module or at least a "how to" with a link. If have seen you answer this question so many times. I think twice for me alone, lol :crying:
Click to expand...
Click to collapse
A new thread for just a magisk module?
Btw here is the module
https://androidfilehost.com/?fid=1899786940962618515
cultofluna said:
A new thread for just a magisk module?
Btw here is the module
https://androidfilehost.com/?fid=1899786940962618515
Click to expand...
Click to collapse
Why not? There are so many threads about modules. Could you explain what happened to my phone that makes flashing this module necessary?
Sent from my OnePlus 6T using XDA Labs
wooki said:
Why not? There are so many threads about modules. Could you explain what happened to my phone that makes flashing this module necessary?
Click to expand...
Click to collapse
You're missing the reserve partition that includes the emojis and fonts...
Because you're wiped the data
cultofluna said:
You're missing the reserve partition that includes the emojis and fonts...
Because you're wiped the data
Click to expand...
Click to collapse
Oh it's so confusing with all those new partitions in android 10. Thanks for your help, I'm installing this module tomorrow.
Sent from my OnePlus 6T using XDA Labs
cultofluna said:
A new thread for just a magisk module?
Btw here is the module
https://androidfilehost.com/?fid=1899786940962618515
Click to expand...
Click to collapse
Yeah, because it may stop the 50 threads like this one. Just explain the issue, the target audience, how to apply, and the expected results. Then link the module on Android file host like you just did.
Something like "[Magisk Module] - Font and Emoji Fix for Android 10 T-Mobile Variant"
You dont have to put it in development, you cant just post it in the General discussion thread.
Just a thought.
I did the same local upgrade thing in Oneplus 6T but now I can't login into my Oneplus Account, it is giving me an error like in below ss:
I was having the same problem with 10.3.0 no emoji icons within say hangouts.
flashing the above zip helped and fixed it
thanks
cultofluna thanks sir
in my oneplus 6 this module works properly. all fonts emojis and wallpapers are recovered by flashing this module in magisk manager. again thanks sir. ?
wooki said:
Hello,
after doing a clean install because of previous problems (dual sim not working) my device is now missing fonts. I can't see any emoji and some symbols.
I was able to fix the emojis by installing some as Magisk module but I'm unable to find symbol fonts.
See me attachment as reference. Normally there should be to arrows pointing away from English like this: < English >
If someone could provide me with the missing fonts, I would greatly appreciate it.
Click to expand...
Click to collapse
I would suggest clean install oxygen os and if you want root flash only magisk 20.3 . I had that problem on 20.4
Why its not working on my OnePlus 6t 10.3.4 android 10 please help i have already flashed reserve v1.zip doesn't work please help me :'(
The Magisk module worked perfectly to restore fonts and emoji to my Oneplus 6T on OOS 10.3.5 with Magisk 20.4.
Thanks OP for posting - and everyone who weighed in with solutions.
This community is awesome!
Limitscrw said:
The Magisk module worked perfectly to restore fonts and emoji to my Oneplus 6T on OOS 10.3.5 with Magisk 20.4.
!
Click to expand...
Click to collapse
+1
Confirmed that reserve partition install via magisk restored the fonts for 6T on OOS 10.3.5 with Magisk 20.4.
The module fixed my forward/backward navigation arrows and missing local langage fonts (previously showing as square blocks).
Thanks A LOT!!!
This is really help on my Oneplus 6 after installing OOS 10.3.6
One more question, why reserve img is missing? Please tell me if anyone konw, just curiosity.
Related
I am creating this guide for Magisk v13 and working modules. Please let me know if there are additional ROMs that this guide works with, but I am trying to keep the steps as simple as possible.
Magisk Installation Instructions:
Download Latest PureNexus / PA ROM and follow those instructions
Boot into the ROM and go through the initial set up, at this point verify that SafetyNet is passing. If it is not you may need to factory reset and re-install your ROM.
Reboot into TWRP
Flash the attached modified Magisk-v13-Pixel (from Goodwin_c)
Flash the attached verified boot signer (from Chainfire)
Reboot the System
Uninstall the version of Magisk Manager that shows up in the drawer
Install the attached version of MagiskManager_v13_new5.apk (from Goodwin_c)
Open Magisk Manager (you may need to wait a bit, I had to clear it from my recents a few times before it launched and asked for file system permissions)
Go to the app settings and tick on Magisk Hide
Re-run SafetyNet and verify it's passing
Working Modules
I will create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
Modules I have modified to work with Pixel:
Emoji One - systemlessly replaces emojie font with Emoji One.
Tethering Enabler - enables tethering on phones where it is disabled by the manufacturer/provider.
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
mac796 said:
Is v13 working for you. I tried it when he first released it. Very glitchy. Went back to 12. A few of us did. That and we couldn't restore a backup with TB.
Click to expand...
Click to collapse
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
uodii said:
These still looks like the ones @goodwin_c created. If that's the case, then yes, it's very glitchy and you are better off sticking to v12. It is a good starting point though and hopefully he can get an updated v13 working soon!
Click to expand...
Click to collapse
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
mac796 said:
I was just curious why a guide was made with V13 this might scare people off wanting to run magisk on a pixel V12 is way more stable
Click to expand...
Click to collapse
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
That's cool maybe I'll give it another shot.
chadgauth said:
I haven't had any issues yet, but I've only been using it for a few days. I have the Arise module installed and have been using Dolby Atmos while maintaining a clean SafetyNet
Click to expand...
Click to collapse
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
uodii said:
What rom are you using? The issue I came across that Goodwin confirmed was that root seemed to work, but apps like Titanium Backup didnt work properly. Are you running any apps that require root? And do they seem to perform correctly?
It also looks like he released a v13_new5.apk on his AFH account. Are you still using new1? Just curious if the new5 version might fix any previous issues.
Click to expand...
Click to collapse
Yeah, I haven't tried Titanium backup, I'm using Solid Explorer and Greenify with root and they seem to work alright. I am still using new1, I will update to new5 and play with Titanium to see if I can get it to backup and reinstall an app
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
I'm very interessted about how to modify modules to work with Pixel device !
chadgauth said:
I may create a video guide on how to modify modules to work with the Pixel phones until Magisk is fully updated to support Pixel.
I'll attach some working modules that I have modified.
Click to expand...
Click to collapse
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Only custom rom? Anyone tried on stock image?
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
maflin18 said:
The zip failed to flash for me. Couldn't unpack boot image.
Pixel running PN 7.1.1, twrp RC1.
Click to expand...
Click to collapse
Try TWRP RC2
TENN3R said:
Only custom rom? Anyone tried on stock image?
Click to expand...
Click to collapse
The stock image should most likely work, if it works for you or someone else in this thread let me know and I'll update the OP.
y2kbugleung said:
Excuse me, may I know is there a thread by Goodwin_c publishing the modified Magisk?
I just want to keep updated to his modification.
I have been using his modified Magisk v12, but finding it from RR thread.
There is no way to know if it is updated or not.
Click to expand...
Click to collapse
I'll update the post date in brackets when I make updates here. Goodwin_c does not have his own thread, so I've just been monitoring his android file host account. The original poster has not updated or maintained his guide from the RR thread, so I created a new one to be as up-to-date as possible and include modules as I modify them.
foski said:
The only one I need is Tethering Enabler! Emoji One would be nice to have as well...
Click to expand...
Click to collapse
I've included both of those. I basically have been using beyond compare to compare the arise module that works with pixel to other modules and re-zipping them and testing with my device.
I see. Thanks.
Btw do you know the difference between v1 and v5 apk?
It seems MagiskHide is gone on v5?
I have tried Magisk-V13 on Pixel-XL with stock ROM.
I haven't tried it with stock kernel, since SafetyNet won't pass (as far as I understand).
Tested with Elemental-X + MagiskManager-v1, SafetyNet does not pass. App always says "cannot use Play service"
Tested with Kirisakura-Rebase-1.36 + MagiskManager-v1, SafetyNet passes.
MagiskManager-v5 does not come with MagiskHide, so I assume it cannot handle SafetyNet.
Both MagiskManager v1 and v5 loads very slowly.
Before the UI could be used normally (it means Magisk is loaded?), ROOT cannot be obtained.
So those boot-up root-required action would probably fail.
This is Xposed installation/testing thread
This is new and unofficial version- can be unstable.
I am not responsible for bricks and loosing your data! ;P
My rom chinese kangvip b225
1. First make backup of your data with twrp
2.Install xposed instaler by dvdandroid
3Flash xposed 87 sdk24 by PurifyOS. .zip file with twrp
4.Install modules, activate them then reboot
Please write what firmware you are using and what modules work on yours phones.
If something goes wrong, first try to flash uninstaller and reboot before restoring data from nandroid
Thanks to great devs for bringing xposed to our phones!
Rovo89, for making Xposed
-Abforce, for update Xposed ti Nougat
-PurifyOS Team, for make possible the build zip with source by abforce
Original thread
What does xposed do for me?
Sent from my MHA-L29 using Tapatalk
First boot is longer than usual
Youtube, camera, play store isnt crashing anymore
I not observed system slowdowns yet
Module App Settings 1.13 is working for all apps
70challenger said:
What does xposed do for me?
Sent from my MHA-L29 using Tapatalk
Click to expand...
Click to collapse
"It lets you install apps/mods/tweak with system level functionality without having to flash them via custom recovery."
Try to search xposed modules or xposed framework on google
gahu777 said:
"It lets you install apps/mods/tweak with system level functionality without having to flash them via custom recovery."
Try to search xposed modules or xposed framework on google
Click to expand...
Click to collapse
Ok, thanks for your reply.
Sent from my MHA-L29 using Tapatalk
its great news! Will wait until it become more stable, but I missed xposed a lot.
Download link?
gahu777 said:
My rom chinese kangvip b225
Click to expand...
Click to collapse
where can I download Chinese Kangvip B225?
rbt001 said:
where can I download Chinese Kangvip B225?
Click to expand...
Click to collapse
Found only link from baidu, you can downliad it from mobile, but you must open site in desktop view http://pan.baidu.com/share/link?shareid=2152760768&uk=1528889538
Or download ephemera rom https://forum.xda-developers.com/mate-9/development/ephemeral-mate-9-b213-viper-kang-tools-t3627176
Thanks but...
Found only link from baidu, you can downliad it from mobile, but you must open site in desktop view http://pan.baidu.com/share/link?shareid=2152760768&uk=1528889538
Click to expand...
Click to collapse
Thanks, I had already found this link via Google but it seems you need to create an account in order to be able to download. And to create an account you need to do verification via Chinese mobile number
Hi
I have found web page with Xposed Framework For EMUI 5.0 And EMUI 5.1 :
http://www.themefoxx.com/2017/08/xposed-framework-emui-5-0-emui-5-1.html
not tested yet but i am going to
reg
repoman728 said:
Hi
I have found web page with Xposed Framework For EMUI 5.0 And EMUI 5.1 :
http://www.themefoxx.com/2017/08/xposed-framework-emui-5-0-emui-5-1.html
not tested yet but i am going to
reg
Click to expand...
Click to collapse
I had it working, but it was a little hit and miss. It would cause a few moderate issues like when I tap an app it would try to open and then just disappear. I would have to tap the app a good 3 or 4 times to get it to actually open.
Also was about 50/50 on which modules actually worked. I really wanted gravity box most, it didn't work. GB Nougat is still highly experimental though.
Thanks for update and reply I was just about to install , it is a pity, I will have to wait more
benjmiester said:
I had it working, but it was a little hit and miss. It would cause a few moderate issues like when I tap an app it would try to open and then just disappear. I would have to tap the app a good 3 or 4 times to get it to actually open.
Also was about 50/50 on which modules actually worked. I really wanted gravity box most, it didn't work. GB Nougat is still highly experimental though.
Click to expand...
Click to collapse
Gravitybox nougat works with xposed from my topic, about 80% of settings working fine ok kangvip b225
So I've done some research gathering error 1 , I can confirm its not a twrp problem its a updater-binary error and it can't find our boot.IMG in magisk . So if you want magisk 13.3 here's how !
Flash magisk 11.6
Download the latest apk for magisk manager
Click update magisk to 13.3 there it should be done !
However if the app crashes when either updating or using root use a older v of magisk manager
Downloads: thanks to the guy that posted these
https://forum.xda-developers.com/g5/how-to/guide-magisk-11-6-13-3-t3651439/post73287991
infixremix said:
So I've done some research gathering error 1 , I can confirm its not a twrp problem its a updater-binary error and it can't find our boot.IMG in magisk . So if you want magisk 13.3 here's how !
Flash magisk 11.6
Download the latest apk for magisk manager
Click update magisk to 13.3 there it should be done !
However if the app crashes when either updating or using root use a older v of magisk manager
Click to expand...
Click to collapse
Could you post a link to magisk 11.6?
I don´t find this old version
I'll try this today.
Edit
Worked with this two files. Thanks man!
Sent from my Moto G5 using XDA Labs
infixremix said:
So I've done some research gathering error 1 , I can confirm its not a twrp problem its a updater-binary error and it can't find our boot.IMG in magisk . So if you want magisk 13.3 here's how !
Flash magisk 11.6
Download the latest apk for magisk manager
Click update magisk to 13.3 there it should be done !
However if the app crashes when either updating or using root use a older v of magisk manager
Downloads: thanks to the guy that posted these
https://forum.xda-developers.com/g5/how-to/guide-magisk-11-6-13-3-t3651439/post73287991
Click to expand...
Click to collapse
It IS an TWRP Error. S5 Mini had Same issue. After official TWRP dropped, using the same zip worked. (My opinion.)
p8tgames said:
It IS an TWRP Error. S5 Mini had Same issue. After official TWRP dropped, using the same zip worked. (My opinion.)
Click to expand...
Click to collapse
Yes it might be but if u look in magisk manager it can't detect our bootimg either
infixremix said:
Yes it might be but if u look in magisk manager it can't detect our bootimg either
Click to expand...
Click to collapse
Because of TWRP. You can read the boot Image path by going to the Dev dir. You will need to Report the Bug. (I think I will do that now)
p8tgames said:
Because of TWRP. You can read the boot Image path by going to the Dev dir. You will need to Report the Bug. (I think I will do that now)
Click to expand...
Click to collapse
infixremix said:
Yes it might be but if u look in magisk manager it can't detect our bootimg either
Click to expand...
Click to collapse
magisk won't work on our device because f2fs is outdated - you need to update f2fs in the kernel
TheFixItMan said:
magisk won't work on our device because f2fs is outdated - you need to update f2fs in the kernel
Click to expand...
Click to collapse
exactly
Hi guys, but magisk work in your Moto G5? On my device didn't work the modules. Thanks for givme a solution if it exists
Sent from my Moto G5 using XDA-Developers Legacy app
theflanker said:
Hi guys, but magisk work in your Moto G5? On my device didn't work the modules. Thanks for givme a solution if it exists
Sent from my Moto G5 using XDA-Developers Legacy app
Click to expand...
Click to collapse
iv given you the solution - update f2fs in the kernel - in other words rebuild the entire kernel
TheFixItMan said:
iv given you the solution - update f2fs in the kernel - in other words rebuild the entire kernel
Click to expand...
Click to collapse
Ehmmm... Thanks bro I think i will not use the magisk modules! :fingers-crossed:
This is not my work i am just sharing this as many users face SafetyNet fails in many roms especially in oreo roms and practically no fix is available and we get seriously crazy as no proper fix are available because no specific reasons are seen as why it fails they are random, Same happened with me too.
This Magisk Module has been personally tested by me on omni rom, works with magisk 14.0 and above, Should also work fine in nougat as well, Test it and comment below.
Steps to install:
1)Flash this module through TWRP or magisk(i personally flashed it via TWRP, Should work fine when flashed via magisk)
2)Clear Cache/Dalvik
3) Reboot
4)It should pass SafetyNet
5)Enjoy
Tips: Before flashing this module try clearing data of play store and after following above steps and flashing, Hide root from play store and google framework before checking for SafetyNet, Just to avoid failure, This is what i did.
As this is a magisk module, You can uninstall this by deleting this module from magisk and reboot.
Here's Link to download the module
Module
All credits goes to @Deic He is the real man behind this Module, For more details and to thank him for this great module visit his thread.
Link
10 views yet no like, Strange
Hi, is this same as one posted below by @Deic or different?
https://forum.xda-developers.com/showpost.php?p=73432221&postcount=1075
mGforCe said:
Hi, is this same as one posted below by @Deic or different?
https://forum.xda-developers.com/showpost.php?p=73432221&postcount=1075
Click to expand...
Click to collapse
Thanks a ton bro, so he is the real man behind this, I'll have to change proper credits i guess.
najjurocks619 said:
Thanks a ton bro, so he is the real man behind this, I'll have to change proper credits i guess.
Click to expand...
Click to collapse
You are most welcome!
Sent from my Z2 Plus using Tapatalk
Okay so I've been trying some treble gsi's and yesterday I installed the AICP image on my phone. I've had zero issues, magisk works, substratum works, the style option in settings works, magisk modules work, the rom is really smooth and has a lot of settings and the battery life is pretty good too :^]
Download link: https://drive.google.com/drive/folders/1LtPNR6R4dxJslXFIjpF9FhyfEfhBTCOa
List of available treble images: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Gapps: https://opengapps.org
Latest magisk: https://drive.google.com/file/d/1YftvNNZVruyYgtFE5wFsgLTDDb4Yux5W/view
Install process is the same as with any other treble rom.
Happy flashing!
edit: typos
Quick question... where did you get this? Because I never saw a AICP treble ROM thread. Anyway, that doesn't really matter. I have to give you my gratitude for sharing this ROM! I was about to give up and go back to the ugly stock EMUI.
I owe you one!
EDIT: It would be better to say in the original post if there are GApps included with this ROM or not, it would help clear up some confusion.
crayonicle said:
Quick question... where did you get this? Because I never saw a AICP treble ROM thread. Anyway, that doesn't really matter. I have to give you my gratitude for sharing this ROM! I was about to give up and go back to the ugly stock EMUI.
I owe you one!
EDIT: It would be better to say in the original post if there are GApps included with this ROM or not, it would help clear up some confusion.
Click to expand...
Click to collapse
I feel you man, at first I thought treble was too unstable for daily usage but luckily I was wrong! I found the rom on a github page of a fellow xda user: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
It has all the treble roms that are currently availabe if you wanna try 'em out
And there are no gapps included in the rom itself, I used the pico package from opengapps.
jetzecazemier said:
I feel you man, at first I thought treble was too unstable for daily usage but luckily I was wrong! I found the rom on a github page of a fellow xda user: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
It has all the treble roms that are currently availabe if you wanna try 'em out
And there are no gapps included in the rom itself, I used the pico package from opengapps.
Click to expand...
Click to collapse
HOLY MOLY ???
Thanks for the link, never would have found it by myself :good::good::good:
crayonicle said:
HOLY MOLY ???
Thanks for the link, never would have found it by myself :good::good::good:
Click to expand...
Click to collapse
Most welcome!
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Vinayak.pk1 said:
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Click to expand...
Click to collapse
Volte doesn't work, i don't think any of the treble roms have it though, same goes for safetynet. Camera works great tho.
jetzecazemier said:
Volte doesn't work, i don't think any of the treble roms have it though, same goes for safetynet. Camera works great tho.
Click to expand...
Click to collapse
You can make just about any ROM pass safteynet by grabbing Magisk Root, and install the module MagiskHide Props Config. Then using the terminal commands you can install the Huawei fingerprint thus passing safteynet correctly.
Vinayak.pk1 said:
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Click to expand...
Click to collapse
See above
Wh1t3Rose said:
You can make just about any ROM pass safteynet by grabbing Magisk Root, and install the module MagiskHide Props Config. Then using the terminal commands you can install the Huawei fingerprint thus passing safteynet correctly.
See above
Click to expand...
Click to collapse
That's awesome! I didn't know about that. I've ran into an issue with the terminal tho when trying to run su:
$ su
CANNOT LINK EXECUTABLE "/sbin/su": "/data/data/com.termux/files/usr/lib/libtermux-exec.so" is 64-bit instead of 32-bit
Aborted
Any solution for this?
Possible to have a antutu screenshot?
jetzecazemier said:
That's awesome! I didn't know about that. I've ran into an issue with the terminal tho when trying to run su:
$ su
CANNOT LINK EXECUTABLE "/sbin/su": "/data/data/com.termux/files/usr/lib/libtermux-exec.so" is 64-bit instead of 32-bit
Aborted
Any solution for this?
Click to expand...
Click to collapse
Sounds like root isn't install correctly? Did you check with Root Checker from play store? Which terminal program did you use? You ran su and granted root access first right?
I can't get this ROM to flash. tried both with fastboot tools and flashing the img in TWRP. I just get the Generic "Serious problems have occurred..." message
Edit: NVM I am a moron. Was flashing the AB image. :facepalm:
Bugs spotted
1. Lockscreen clock sometimes does not show, along with the date. I don't know the reason why, it just sometimes doesn't show it, like when your reboot your phone.
2. Can't set duration for long pressing the power button to enable the flashlight.
That's all the bugs I've noticed so far.
crayonicle said:
1. Lockscreen clock sometimes does not show, along with the date. I don't know the reason why, it just sometimes doesn't show it, like when your reboot your phone.
2. Can't set duration for long pressing the power button to enable the flashlight.
That's all the bugs I've noticed so far.
Click to expand...
Click to collapse
Is there a TWRP that works with Custom 8.1 Roms? I checked the P10 forums and nada Everything is EMUI 8.1 or Custom 8.0 ROMs only. I need working TWRP for this ROM.
Wh1t3Rose said:
Is there a TWRP that works with Custom 8.1 Roms? I checked the P10 forums and nada Everything is EMUI 8.1 or Custom 8.0 ROMs only. I need working TWRP for this ROM.
Click to expand...
Click to collapse
If you need one for the Honor 7x, use this TWRP that I uploaded to Google Drive just now .
Not my TWRP, just uploading to Google Drive just in case :good:
crayonicle said:
If you need one for the Honor 7x, use this TWRP that I uploaded to Google Drive just now .
Not my TWRP, just uploading to Google Drive just in case :good:
Click to expand...
Click to collapse
Thanks I had that same one but for some reason mine wasn't working. Must've gotten corrupted at some point.
Anybody having issues with Play Services crashing?
Wh1t3Rose said:
Thanks I had that same one but for some reason mine wasn't working. Must've gotten corrupted at some point.
Anybody having issues with Play Services crashing?
Click to expand...
Click to collapse
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
crayonicle said:
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
Click to expand...
Click to collapse
Yes. I'll try flashing again
crayonicle said:
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
Click to expand...
Click to collapse
No go. Still get crashing with play services. Just to be sure you are flashing Pico Gapps 8.1 ARM64 right?
I tried a factory reset with stock recovery as well.
Wh1t3Rose said:
No go. Still get crashing with play services. Just to be sure you are flashing Pico Gapps 8.1 ARM64 right?
I tried a factory reset with stock recovery as well.
Click to expand...
Click to collapse
Yes, that's right, I'm using Pico GApps 8.1 ARM64, try clearing cache of download manager, downloads, google play services, and google play store?
Hi !
Does it work on BND-L21C432 ? What are the steps to install the rom ? Does it have to be EMUI 8.0 ?
Thank you for your work on this rom!