Hi there.
I have a Samsung Galaxy S4 GT-I9505 and I’m using TWRP Recovery 6.0.4.4.
I tried to flash a nightly-version of CyanogenMod (cm-10.2-20131101-NIGHTLY-jfltexx.zip). I did a Factory Reset before flashing, TWRP said it had been successful.
When I tried to boot my phone, I can see the "SAMSUNG GALAXY S4 GT-I9505" logo, here it got stuck. I can not see the cyanogen boot animation.
Though MD5 hashes and file sizes are ok, I tried another ROM: SuperNexus http://forum.xda-developers.com/showthread.php?t=2407616
Here it was exactly the same. My device gets stuck even before the boot animation.
I was so desperate, that I tried to format my complete internal storage. Flashing the ROMs was successful again, I could boot both ROMs CM and Supernexus then. But after I turned off my device I can't boot any more. Again I can not see the boot animation.
I have already tried it with PhilZ and CWM. I flashed them using my current recovery.
Any advice?
I am sorry for my English, if you need more detailed explanation, please ask. I tried to describe everything as detailed as I can.
Can you get into download mode? You may have to flash a stock ROM to get it to working again. Was the phone previously rooted?
And are you currently on a stock ROM or coming from a custom ROM?
Yeah, I can get into Download mode.
Well, I am not sure what ROM I'm currently using since I wiped everything. Previously I had FoxHound ROM, samsung-based pre-rooted custom ROM.
Have you tried flashing a custom Kernel?
Sounds like what I had when I tried to flash a TW Kernel for a AOSP ROM.
If you can't get into recovery, go into download mode and flash the latest CWM. Got my phone working.
FoxHound ROM installed a custom Kernel, "Ausdim Kernel" I think.
Now I have CWM 6.0.3.2 from here: http://forum.xda-developers.com/showthread.php?t=2279579
Not sure if this is the latest version ... I can't find an Odin-flashable *.tar
Anyway it doesn't work too. This recovery can't even flash CM, it gets stuck at "opening update package ..."
Sorry its a bit late.
http://forum.xda-developers.com/showpost.php?p=46312260&postcount=149
Use them. This may help as a tutorial to follow loosely but that was for non working WiFi.
http://forum.xda-developers.com/showpost.php?p=47076192&postcount=6
I have searched everywhere and end up with the same problem every time I try to install a custom recovery. I try many different recoveries and only old TWRP recoveries will boot but will not allow me to flash roms. I was using a modified custom recovery for the longest and was the only one I've managed to use, it was 3.0.1 IIRC by kinglilrowrow. Using this recovery I could flash roms. Now I can't find this recovery anywhere. Currently I can only boot into recovery using First Aid from the forum but have not been able to flash any roms.
Finally was able to flash TWRP 3.0.2-2 not sure how it worked. Went back to stock recovery and oxygen rom then followed the same guide but it worked this time. All the info and files from XDA so big thanks to the site and developers.
Sounds like you where stuck on the old bootloader, which would explain why newer recoverys didn't want to boot. Should have been solved by updating to OxygenOS 3. ?
Hey everyone.
I'm really hoping someone can help me. I just got my Redmi 2 Prime today, and before even properly setting it up I had rooted it. It wasn't long before I decided to try a different ROM. I decided on Resurrection Remix and TWRP recovery, both of which I flashed an ran flawlessly. RR booted up, everything was great.
I then tried flashing SuperSU again, after installing RR. Flashing the .zip file resulted in a boot loop, with no access to recovery, only fastboot.
What I've tried (with no success):
- Re-flashing TWRP (through Fastboot).
- Flashing CWM instead (through Fastboot).
- Flashing stock recovery (through Fastboot).
None of these have proven successful..... Can anyone give any advice on how to get out of this mess? I hardly feel up for having to take my phone into a shop without even having had it for 24 hours.....
TIA!
Fastboot flash Redmi 2 ROM. Download ROM file from MIUI forums and read the instructions there. Go to this link http://en.miui.com/a-234.html
i dont know if this comes at the right time,since fastboot is accesbile ,boot into fastboot, and flash recovery into boot(this may sound foolish but you can do it)
fastboot flash boot recovery_twrp.img
reboot,you will be taken into twrp
you can take a backup here,
now wipe all and flash the ROM.zip
anfd it should all work fine
I had the same problem when I switched from MIUI 8 4.4Kitkat to CM13 6.0
But I was able to solve it without fastboot.
RessurectionRemix and most roms esepecially CM based have "built-in" superSU manager.You just have simply to re-enable it on the developer settings.No need to flash supersu.zip,it would just make things worse.Download Flashify to boot in TWRP manually since flashing different ROMs will temporarily remove the TWRP(doing the button combination wouldn't boot into recovery,instead bootloop like you mentioned).
Then I was able to perform a restore on stock MIUI 8.
You have to download Flashify in order to manually force the phone to boot in recovery mode,since doing to volume up+power wouldn't let you.
I don't know if this is because my TWRP version only supports KitKat....or switching from 4.4-6.0 is a big gap.
Thanks for the responses!
I ended up solving the issue, though there wasn't really an issue to begin with. Turns out the button combination to enter recovery is different than stock (both volume buttons and power), though I did re-flash to the latest version of TWRP.
I'm now running Resurrection Remix without flaws!
But yeah, I realize now that CM based ROMs have a baked-in SU manager, it was foolish of me to flash the file without doing proper reading up beforehand!
Hi guys, been using my rooted but otherwise stock OOS rom with TWRP and Magisk for the past few weeks. Today I decided to take the plunge and try either the Lineage OS or Resurrection Remix roms.
I'm using the latest OFFICIAL TWRP.
So I decrypted following the instructions to flash "no-verity-opt-encrypt-5.1.zip", then format data. All went well, so I then sent over the ROMS I wanted to try out. I started with the official ResurrectionRemix. Bootloop. Then the unofficial LineageOS. Bootloop.
Ok, well I guess I'm not gonna get to use any of the cool new OS's for awhile. I'll install the full stock firmware zip so I can have a working phone again. Bootloop.
Now when I say bootloop, the phone is booting to the BootAnimation and just repeating it. It shows the proper boot animation for whatever zip I have installed (resurrection/LOS/OOS), but it stays on there for up to 20 minutes before I have to hard reboot to the recovery again.
I decided to install the stock recovery trying a few methods. I first tried the ALL-IN-ONE tool. It said it flashed the recovery fine, so I booted to the recovery and after staying on a black screen for too long, the language options came up and I sighed a breath of relief. But before I could select English with the volume buttons, it rebooted by itself. It did this again when I manually entered recovery. So I figured maybe the tool flashed the wrong version, so I googled stock recovery for OnePlus 5, I found a few random links for stock recoveries for the OP5 and flashed them, but they more or less do the same thing or not boot at all.
I've tried changing the filesystem for both Data and System using any combinations of EXT4 and F2FS. Everything results in boot animation bootloops.
I have been flashing Roms since the Samsung Galaxy S3 and every phone since and never had any problems.
Currently when trying to install the stock Full OOS official zip with TWRP, the phone won't even go to the boot animation, it only goes to a black screen with the top LED in a light blue color.
I have also tried every version of TWRP there is for the OnePlus 5. Unofficial, Official, 3.1.1-0 and 3.1.1-1.
So I guess my question is....What filesystem is each partition supposed to be on and for which OS?
Lineage based:
System: ?
Data: ?
OOS Based:
System: ?
Data: ?
And any ideas on getting my phone running again?
And anyone have an official confirmed working version of the stock recovery? The one from ALL-IN-ONE TOOL doesn't work for me. It loads the language selection, then the screen goes black with a light blue LED on the top of the phone.
Actually I'm getting that on some roms instead of the bootanimation, like FreedomOOS. What does it mean when you have a black screen and a white LED?
Man, I really thought I was getting somewhere. If I boot into TWRP, change the Data partition to "F2FS", then flash the stock recovery, the stock recovery will boot, however, when inside the stock recovery and I try to flash the stock zip, it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
Ok, I have the official stock recovery from the OnePlus site, but still can't use it. Here is was happens depending on how I left it with TWRP:
System: F2FS
DATA: F2FS
- Stock recovery will load after some time, freeze, then the screen goes black with white LED on top.
System: EXT4
DATA: F2FS
- Stock recovery loads fine, I can go through the settings and install from SD card, but when I do it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
System: EXT4
DATA: F2FS
- If I try to flash stock rom through TWRP, it just boot loops on the animation forever.
I have now also tried flashing the stock boot.img, but no difference.
I have 2 things you can try!
First, replace the bootloader with stock and do a factory reset:
1. flash the stock recovery over
2. then in fastboot mode enter, fastboot oem lock (This forces the phone to wipe cache and data, and also do a complete reset)
Did it work? if yes YAY if not go to Second!
Second if your system.img is ****ed up you have to replace it!
Download the newest version of the stock rom from oneplus link here
Unpack it
research how to use an extractor to convert the system.new.dat to system.img
once thats completed enter fastboot mode and flash the new system.img over with Fastboot flash system system.img
now go into recovery and do a factory reset and wipe cache, and dalvik
Please reply back wether or not this work
"Ihave 2 things you can try! First, replace the bootloader with stock and do a factory reset..."
Is the bootloader simply the boot.img?
After doing the first thing, it simply says that the device is corrupt and will not boot. But it is locked again.
But I will have to unlock it again to do any further flashing.
Hmm, I think I may have gotten it. After unlocking again, flashing the stock recovery and boot.img, then locking again and wiping in the stock recovery, I have finally booted into the stock rom.
I still have no idea what went wrong, and I really want to know, so that in the future I can flash other Roms, like LineageOS.
I mean, I followed the steps exactly.
If it says the device is corrupt it simply means you got something else besides stock rom.
So now unlock it and try the system.img instead
It was because I still had TWRP with the stock rom.
I got it working though, thanks for your help.
Do you have any idea on what might have went wrong when trying to flash the lineageOS based roms and why it got messed up so royally?
Great to hear you fixed it ^_^
Probably some minor bug, if you wanna try installing lineageos again use the 3.1.1 TWRP build that supports backups and do a full backup so you don't have to go thru all this again
---------- Post added at 12:17 AM ---------- Previous post was at 12:13 AM ----------
Not really just try again but remember to use TWRP 3.1.1, as 3.1.0 don't support backup and probably have been part of your problem
If your trying again and gets it successfully installed could you do me a favor and test if Drivedroid works on it? And pm me the result, I'm looking for a rom where Drivedroid will work... Haven't found one so far
You know, I did do a backup with the OFFICIAL TWRP, but it also resulted in a bootloop. I made the backup after decrypting, so I don't know why it bootlopped.
https://forum.xda-developers.com/oneplus-5/development/rom-unified-lineageos-7-1-2-t3635483
Is this the one you tried installing?
I tried like every ROM at one point yesterday, but I think I started with
https://forum.xda-developers.com/oneplus-5/development/rom-resurrection-remix-n-7-1-2-t3636578
Did you remember Gapps?
Also in some cases its better not to root before you have the custom rom running, you usually only need a custom bootloader like TWRP
Yeah, I tried with Gapps, and I never rooted before first trying to boot.
As of yesterday Ressurrection remix, released the first official stable build so try again your should'nt have any problems if you follow the guide 100%
Ever find a solution? I'm stuck here now. Can't get any ROM to boot up, they all get stuck on the boot animation
Bump. I am also stuck in this state
I tried to factory reset a custom ROM, got sent to TWRP then I can't reboot to system from there. Tried a clean install but to no avail. I've looked around on the internet and I think I have to reinstall stock ROM and then reinstall custom recovery and ROM, except if I were to install the stock ROM once again (with sp tools) I need my phone to be turned off, not in recovery mode. So how exactly should I proceed now?
EDIT: Managed to get rid of the TWRP bootloop by restoring from a stock nandroid I've found on the forums, coupled with flashing a stock recovery image using TWRP. Reunlocked bootloader, flashed TWRP all over again and then flashed custom ROM and Gapps. Everything running fine now.
Mods feel free to delete this post since it's solved itself, or leave it in case anyone needed help concerning the same issue, up to you.
Hi
Bibi if you’re still active on xda reply to this
Help me i got same issue with you. Can provide me with ur stock rom and stock recovery? And how to do. Thanks very much.
Bibicp said:
I tried to factory reset a custom ROM, got sent to TWRP then I can't reboot to system from there. Tried a clean install but to no avail. I've looked around on the internet and I think I have to reinstall stock ROM and then reinstall custom recovery and ROM, except if I were to install the stock ROM once again (with sp tools) I need my phone to be turned off, not in recovery mode. So how exactly should I proceed now?
EDIT: Managed to get rid of the TWRP bootloop by restoring from a stock nandroid I've found on the forums, coupled with flashing a stock recovery image using TWRP. Reunlocked bootloader, flashed TWRP all over again and then flashed custom ROM and Gapps. Everything running fine now.
Mods feel free to delete this post since it's solved itself, or leave it in case anyone needed help concerning the same issue, up to you.
Click to expand...
Click to collapse
Bibicp said:
I tried to factory reset a custom ROM, got sent to TWRP then I can't reboot to system from there. Tried a clean install but to no avail. I've looked around on the internet and I think I have to reinstall stock ROM and then reinstall custom recovery and ROM, except if I were to install the stock ROM once again (with sp tools) I need my phone to be turned off, not in recovery mode. So how exactly should I proceed now?
EDIT: Managed to get rid of the TWRP bootloop by restoring from a stock nandroid I've found on the forums, coupled with flashing a stock recovery image using TWRP. Reunlocked bootloader, flashed TWRP all over again and then flashed custom ROM and Gapps. Everything running fine now.
Mods feel free to delete this post since it's solved itself, or leave it in case anyone needed help concerning the same issue, up to you.
Click to expand...
Click to collapse
can you put a link where you find the stock recovery, cos i've restore stock recovery on twrp but my device keep booting to twrp