Related
Hi.
So, a quick overview. My laptop suddenly stopped recognizing my Nexus 10 while in the midst of transferring some files over. I decided to finally root. I used the cf-autoroot tool for Nexus 10 Lollipop. The last step of the rooting involves an automatic reboot. Now my Nexus 10 is stuck in the boot.
Details:
theunlockr (DOT) com/2014/11/22/how-to-root-the-nexus-10-on-android-5-0/
That is the guide I used, including the linked cf-autoroot. Sorry for the formatting, I don't have enough posts to post links.
My Nexus 10 is stuck on the step where it shows the four circles moving around. Not sure if that's important.
The cf-autoroot appeared to work successfully except for a piece in the middle that reads:
Same problem. The procedure seemed to go well, except maybe the mounting failed? It says:
Mounting...
- System
- Cache
--- Fail
I tried using the tool several times on two computers, and did my best to update drivers directly from Google (it appears the drivers are all up to date).
My Nexus 10 was on Lollipop. As far as I know, it was up to date, so I think that means it was on 5.0.1
Help?
Hello autoroot is no longer required. Supersu from recovery is enough.
You could just reflash original kernel
Does
Fastboot boot boot. Img works? It boots on the given image without flaging. The boot image is located in the archive to update
Sent from my Xiaomi MI2s
Khaon said:
Hello autoroot is no longer required. Supersu from recovery is enough.
You could just reflash original kernel
Does
Fastboot boot boot. Img works? It boots on the given image without flaging. The boot image is located in the archive to update
Sent from my Xiaomi MI2s
Click to expand...
Click to collapse
This is what I have come here to find out. I'm receiving my Nexus 10 in the mail today. I'm familiar with Nexus devices so I just assume everything is the same with the Nexus 10. But I know since Lollipop came out, there have been changes to how to root on certain devices. Are you saying that everything has been fixed to where I can just install the latest TWRP and flash the latest beta SuperSU on stock ROM and I will be good? If so, then it's the same as my Nexus 5 so I shouldn't have any issues.
jsgraphicart said:
This is what I have come here to find out. I'm receiving my Nexus 10 in the mail today. I'm familiar with Nexus devices so I just assume everything is the same with the Nexus 10. But I know since Lollipop came out, there have been changes to how to root on certain devices. Are you saying that everything has been fixed to where I can just install the latest TWRP and flash the latest beta SuperSU on stock ROM and I will be good? If so, then it's the same as my Nexus 5 so I shouldn't have any issues.
Click to expand...
Click to collapse
Yep, just flash once SU through twrp(in order to get the su binary in the system partition) and then you can use play store to update the binary and the program itself.
CM12 has built in su and nighties are official now.
Khaon said:
Yep, just flash once SU through twrp(in order to get the su binary in the system partition) and then you can use play store to update the binary and the program itself.
CM12 has built in su and nighties are official now.
Click to expand...
Click to collapse
Thanks. I just wanted to double check before I went jumping into it. I'm looking forward to tinkering with it when I get home from work.
Khaon said:
Yep, just flash once SU through twrp(in order to get the su binary in the system partition) and then you can use play store to update the binary and the program itself.
CM12 has built in su and nighties are official now.
Click to expand...
Click to collapse
So I attempted to do all this when I got home yesterday. I found that after unlocking the bootloader, I got stuck in a boot loop. After doing some research I found that this has been an issue with the Nexus 10. Is there a reason for this? I read that locking the bootloader again fixed it, which it did. But I didn't want it locked. So I researched more and found that a a factory reset in stock recovery would fix it. I still had a boot loop. I managed to somehow get everything straightened out with a series of random tries and after installing TWRP and rooting and, again, getting the boot loop I attempted to go back into recovery but accidentally did a simple restart. For some reason, it booted right up after the restart so now I think everything is fine. But why is the Nexus 10 being so difficult? I never had these issues with other Nexus devices. Maybe some of this info will help the OP as well.
Hm unlocking the bootloader does erase whole content but I guess you are already aware of that.
How long did you wait? First boot can take ages much longer than before.
I never had any issues and I have my bootloader unlocked
Khaon said:
Hm unlocking the bootloader does erase whole content but I guess you are already aware of that.
How long did you wait? First boot can take ages much longer than before.
I never had any issues and I have my bootloader unlocked
Click to expand...
Click to collapse
I let it sit for a while. I own a Nexus 5 and I'm familiar with the long first boot. It just seemed like a long time to me. I thought maybe since it was a two year old device that it may take longer. The device is new to me so I'm not familiar with boot times and all that are specific to it yet. But compared to the boot time after I relocked the boot loader, there was a big difference. After re-locking, it booted up in about a minute or two. Flashing TWRP even seemed to mess up some stuff. I think it may have deleted the OS or something. It couldn't mount anything afterwards and even selecting reboot boot loader gave me the prompt that there was no OS installed. So I flashed the system.img, cache.img and userdata.img manually. Which seemed to fix it. And even after I got everything straightened out, it boot up in about a minute or two again. The only time I had issues with getting it to boot is unlocking the boot loader coming from complete stock.
nexus 10 stuck on bootload up
jsgraphicart said:
I let it sit for a while. I own a Nexus 5 and I'm familiar with the long first boot. It just seemed like a long time to me. I thought maybe since it was a two year old device that it may take longer. The device is new to me so I'm not familiar with boot times and all that are specific to it yet. But compared to the boot time after I relocked the boot loader, there was a big difference. After re-locking, it booted up in about a minute or two. Flashing TWRP even seemed to mess up some stuff. I think it may have deleted the OS or something. It couldn't mount anything afterwards and even selecting reboot boot loader gave me the prompt that there was no OS installed. So I flashed the system.img, cache.img and userdata.img manually. Which seemed to fix it. And even after I got everything straightened out, it boot up in about a minute or two again. The only time I had issues with getting it to boot is unlocking the boot loader coming from complete stock.
Click to expand...
Click to collapse
I getting the exact same thing after following instructions to root the machine
I'm not the most experience but I did my nexus 4 & 7 on 4.4.4. now on this 5.0 it seemed a lot hard this time around
I left it on boot load up screen for 3hrs and its still going round? what do I do?
Quick update: I press power +vol up + down and it comes up with the screen saving its unlocked. but the recovery mode just comes up with a android and red exclamation mark.
please help?
regards
Tom
tomistrouble said:
I getting the exact same thing after following instructions to root the machine
I'm not the most experience but I did my nexus 4 & 7 on 4.4.4. now on this 5.0 it seemed a lot hard this time around
I left it on boot load up screen for 3hrs and its still going round? what do I do?
Quick update: I press power +vol up + down and it comes up with the screen saving its unlocked. but the recovery mode just comes up with a android and red exclamation mark.
please help?
regards
Tom
Click to expand...
Click to collapse
Once you get in recovery mode with the android and the red explanation mark, hit all three buttons (Vol up , down and power) until (It can be tricky keep trying) you get a menu. Then use the volume buttons to select "Wipe Data/Factory rest" let it do its thing and reboot. Allow it to boot for 5-10 minutes.
Good luck
I have rooted many phones before without an issue, and during the root process for this phone, everything was going great, I flashed SuperSU zip in TWRP and rebooted, since it was the first boot I expected a decently long wait, after about 25 minutes I followed the guide's instructions for Verizon since it did say some Verizon users were experiencing long first boot times. I took the battery out like it said, put it back in, then proceeded to fastboot boot2.img, like the guide said. After letting it sit for an hour this time, I got the idea that something was obviously wrong. After multiple attempts with no success I tried to fix it myself. So far I have learned that on the fastboot screen it says my bootloader is locked again, even after unlocking it. I have tried flashing TWRP as a recovery, just to at least have a recovery boot, that does not work either unfortunately. So as of right now, all I have is a v20 that has no OS, a locked bootloader, no way of booting recovery, I can fastboot with no ADB, and its virtually a paperweight. If anyone has a solution to at least get back to Stock, I would greatly appreciate it! Thanks!
First off. It will say: Bootloader Unlocked: No
Thats normal. 2nd. you are not bricked. You have TWRP installed. You just need to redo some steps.
PM me. and I will help you.
Did you get it fixed?
frome901 said:
Did you get it fixed?
Click to expand...
Click to collapse
He has not responded to my pm
What roms can we use with dirty santa root?
me2151 said:
First off. It will say: Bootloader Unlocked: No
Thats normal. 2nd. you are not bricked. You have TWRP installed. You just need to redo some steps.
PM me. and I will help you.
Click to expand...
Click to collapse
Bricked 2 LG V20s this way any help would be appreciated lol what steps do I need to redo...
TheDantee said:
Bricked 2 LG V20s this way any help would be appreciated lol what steps do I need to redo...
Click to expand...
Click to collapse
In his case we needed to redo from step 3.
I managed to un-brick mines after returning sadly from the Sprint store.
First, get to the boot loader screen and try running thru the steps again, especially step 3. You need to make sure you have TWRP.
Use this link to make sure you can get into the different modes (Download mode, fastboot, etc) http://www.hardreset.info/devices/lg/lg-v20/
Once you can get TWRP to show up,then you are good. In the mean time I downloaded "LS997-deODEXd-signed"
When I got into TWRP, I transferred the file to my phone. Rebooted from TWRP back into TWRP and flashed the ROM.
During my reboots, I do get a message saying my phone is corrupt, blah blahblah, but I just wait a few seconds and it will boot up.
Hope this helps.
I had managed to brick mines only 3 hours after upgrading from my Note 4. It took me from 9pm to almost 2am to get it back up again. I can live with the message about my phone being unbootable until someone comes up with a work thru.
Bricked T-Mobile v20
I have rooted many phones before without an issue, and during the root process for this phone, everything was going great, I flashed SuperSU zip in TWRP and rebooted, since it was flash a new rom on it then i get boot loop with TWRP. so i decide to OEM LOCK again after that everything was stuck on my phone just boot loop with LG so any solutions please help me...... THx u for help me.
Kinda nerve wrecking to read about all these "bricked" phones popping up after trying this method lol.. Perhaps I'll just wait until a more tried and true way comes out...
Dirty Santa root is not for the average user who has a couple of experience in rooting.
You have to at least have background on Hard bricking phones to fully understand what you are getting yourself into
For anyone that isnt on sprint that has "bricked" their phone. There are kdz's that will allow you to reflash back to 'stock". Someone had an issue with the kdz, but it was an easy fix. If you failed the process, it can be restored. Just if it doesnt want to boot, just lock and unlock the bootloader...
If your phone doesnt have a kdz, I know TeamDev is working on a custom kdz for such phones. Don't bug him if it isn't finished as I type this.
Anyone that can't get into TWRP, or has failed the process. Either start back at step 3, or if you have TWRP installed but can't get to it, the manual way to get into TWRP is a pain.
Keep your back cover off and hold the volume down button for ease. Now press the power button and as soon as you see an LG logo, let go and repress the power button. Its tricky.... If you get the corrupted screen, pop your battery out and put it back in quick and repress volume down and power. Usually if Im quick enough the first LG logo will hang a lot longer than usual and that gives me time to enter TWRP. A factory reset screen will pop up. Hit Yes twice.
Please help urgent
lcovel said:
I managed to un-brick mines after returning sadly from the Sprint store.
First, get to the boot loader screen and try running thru the steps again, especially step 3. You need to make sure you have TWRP.
Use this link to make sure you can get into the different modes (Download mode, fastboot, etc)
Once you can get TWRP to show up,then you are good. In the mean time I downloaded "LS997-deODEXd-signed"
When I got into TWRP, I transferred the file to my phone. Rebooted from TWRP back into TWRP and flashed the ROM.
During my reboots, I do get a message saying my phone is corrupt, blah blahblah, but I just wait a few seconds and it will boot up.
Hope this helps.
I had managed to brick mines only 3 hours after upgrading from my Note 4. It took me from 9pm to almost 2am to get it back up again. I can live with the message about my phone being unbootable until someone comes up with a work thru.
Click to expand...
Click to collapse
Please can u help ke unbrick mine i bought this mobile in my country its expensive and has no support. I have tried all tools but still getting the error model unknown please help sir
Jaistah said:
Dirty Santa root is not for the average user who has a couple of experience in rooting.
You have to at least have background on Hard bricking phones to fully understand what you are getting yourself into
Click to expand...
Click to collapse
What does that mean? Not for the average user who has a couple of experiences in rooting.
I've only rooted 2 phones, this is my 3rd (maybe 4th). I am on Sprint. Instructions worked fine for me. I did have one hiccup, but it was my fault, and I was able to root just fine. I've been running for a few months now.
I have not flashed any custom ROM yet, I'm going to wait for the next major version of Android to come out. The only mods I've done so far are Titanium Backup install so I can remove Sprint crap.
yuppicide said:
What does that mean? Not for the average user who has a couple of experiences in rooting.
I've only rooted 2 phones, this is my 3rd (maybe 4th). I am on Sprint. Instructions worked fine for me. I did have one hiccup, but it was my fault, and I was able to root just fine. I've been running for a few months now.
I have not flashed any custom ROM yet, I'm going to wait for the next major version of Android to come out. The only mods I've done so far are Titanium Backup install so I can remove Sprint crap.
Click to expand...
Click to collapse
it means dirty santa root got a high posibility rate of bricking a device compared to other root methods for other devices and if you have no experience in bricking phones before then you're screwed if it happens to you
Actually, if you follow the directions, almost none of the problems create a true brick-- which means unrecoverable. For most of the cases, you might get a soft brick, meaning you have to back out, use a KDZ to repair it or reflash something else, or start over from scratch and try again-- but usually (maybe with some help from here) you can pull the phone back into a usable state.
I would hazard to guess for the vast majority the process works fine, maybe with a hiccup, but I've not seen many reports of a truly unrecoverable brick from this method. It's complicated, yes, and you need to be ready to read a LOT to understand what's going on, but it seems pretty difficult to end up with a $700 paperweight with this.
So i have been trying tonroot my sprint lg v20 and everytime i try and go to the phone on mobile terminal to enter id
Then enter the apply patch /system/bin/atd /storage/emulated/0/dirtysanta i get this message and i cant go to step 2 to boot into recovery
Any help would be appreciated: i have a sprint v20 and i wanted to know if i have to flash the stock sprint rom or can i just flash lineage rom following this guide? I have it running on AT&T and i want to keep it on AT&T...
can you please assist
Could you help out, please? I don't believe I have hard bricked my LG V20 H910. However, I have read and tried all of the unbrick info out. It seems my screw up is unique. I completed dirty Santa then went to flash a custom. in the boot between that. I get a black screen and cant do anything even download mode will not come up. My PC does make its usual noises when i connect or disconnect, but my phone does nothing.
Ok, I managed to brick mine too. It's a VS995, it was running stock 1AC. I used the LGUP tool to downgrade it to VS99512A, and then did Dirty Sanata and TWRP. After booting into TWRP I decided to try lineage OS with Android 8.0, I did not make a backup of the Stock ROM, which was very stupid. Lineage OS 15.1 flashed but I had no cell service so I panicked and instead of wiping it in TWRP and using the backup of stock I should have created, I just opened LGUP and tried to downgrade it back to stock VSS99512A. Well LGUP said it worked, but when it went to boot it would hang at the Verizon logo with 4 pastel dots. Device manager could see an ADB device and I could connect to it with ADB. So I did and read the logcat. I could see it was trying to update as part of the rollback, but it appeared that some components from Android 8x could not be "upgraded" to Andoird 7.x. There was a repeated error about failing to update SQLite instance version from 3 to 1.
The one feature that could fix this is if the refurbish function worked with any of the VS995 KDZ files we all have access to. But alas, none work instead we only get the upgrade function... or so I thought. Somewhere in my search for the past 2 weeks I found a modified LGUP https://forum.xda-developers.com/v20/how-to/guide-patch-lgup-to-unlock-features-t3652222
**Please be warned what I did was absolutely ****ing stupid, and it was sheer luck I didn't screw anything up.**
From what I can tell if you only flash ("LGUP Upgrade") the KDZ from the same model it never clears the partition it just adds to it. My problem was there was stuff from lineage OS 15 stuck on one of the partitions that was making the rollback to stock fail because it kept saying it couldn't update the SQLLite DB from 3 to 1. So no "upgrade" within LGUP would work because the upgrade function does not clear internal storage. But the link above is to a version someone modded so you can force a partition update from any KDZ onto the system. So I started playing around with forcing KDZs from other models onto my VS995, and I noticed when using the Partion DL function with non-VS995 KDZ files it would say something about the partition changing. All I can assume is that the partition layout is so different on each model and it forces LGUP to re-partition the storage.
**Again I state for the record this was stupid, and I'm only fortunate it worked.**
I forced Partion DL of H91510d_00_VTR_CA_OP_1110.kdz, then H990N10b_00_OPEN_HK_DS_OP_1017.kdz, then back to VS99512A_06_1114_ARB00.kdz, then when it booted it gave the Verizon hello, and moved on finally but the setting service kept crashing while it was trying to load the Secure Boot screen. So I yanked the battery and went into the boot menu and did the Factory Reset function, and it worked.
Lesson learned, always make a backup and don't be so hasty to use tools that aren't fully functional (LGUP).
Perhaps what I've done may help others, maybe I've found out how to reimage or unbrick our V20s. Or maybe I just got really stupid lucky.
A couple weeks back I deleted the OS off of my phone while messing with TWRP recovery trying to install a custom ROM. I looked around the forums and i got my phone to the point where It booted into a stripped down version of android with stock recovery on it, although everything was mirriored and backwards. But when i tried to install the stock rom for my LeEco S3 with stock recovery it got stuck i a boot loop and I couldn't turn off the phone or boot into recovery or anything. So i let it keep booting until it ran out of battery and died. So then i decided i would put the stripped down version back on and start again.
So I went back to my sp flash tool and reinstalled all the partions except the boot and recovery partitions (according to the steps on the forum) but my phone still wont boot into anything, it is completely black and wont boot into recovery or fastboot, and im running out of ideas on how to fix this phone :crying:
After pretty much giving up all hope of fixing my phone, i figured i would try the format option in the flash tool and then reinstall all of the pattitions. I selected format all flash, not doing proper research first, and now i cant even reinstall partions, I get a STATUS_BROM_CMD_SEND_DA_FAIL error anytime i try to flash the partitions.
can you at least get the phone to fastboot mode?
microMXL said:
can you at least get the phone to fastboot mode?
Click to expand...
Click to collapse
No I cannot, The screen is completely black and nothing comes on at all if I hold down the power button.
well damn, looks like a soft brick, it can be repaired but not gonna lie, it is a pain in the butt...
https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937
the guys have made an awesome guide on that thread.
microMXL said:
well damn, looks like a soft brick, it can be repaired but not gonna lie, it is a pain in the butt...
https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937
the guys have made an awesome guide on that thread.
Click to expand...
Click to collapse
I have already looked through that thread, and i have done everything up to the flashing process, and then I get a STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003) Error. I looked it up but the only option I haven't tried to solve the issue is to remove the battery, which i cannot do currently because to remove the battery you need a heat gun to remove the screen to get to the rest of the phone. I think I've given up all hope on fixing this phone and may just begin saving for a new one.
Sgt.Collywobbles said:
A couple weeks back I deleted the OS off of my phone while messing with TWRP recovery trying to install a custom ROM. I looked around the forums and i got my phone to the point where It booted into a stripped down version of android with stock recovery on it, although everything was mirriored and backwards. But when i tried to install the stock rom for my LeEco S3 with stock recovery it got stuck i a boot loop and I couldn't turn off the phone or boot into recovery or anything. So i let it keep booting until it ran out of battery and died. So then i decided i would put the stripped down version back on and start again.
So I went back to my sp flash tool and reinstalled all the partions except the boot and recovery partitions (according to the steps on the forum) but my phone still wont boot into anything, it is completely black and wont boot into recovery or fastboot, and im running out of ideas on how to fix this phone :crying:
After pretty much giving up all hope of fixing my phone, i figured i would try the format option in the flash tool and then reinstall all of the pattitions. I selected format all flash, not doing proper research first, and now i cant even reinstall partions, I get a STATUS_BROM_CMD_SEND_DA_FAIL error anytime i try to flash the partitions.
Click to expand...
Click to collapse
Help, pls I got the exact same problem... Pls any solution to it... I have been at it for a month now no solution, help
same problem. after twrp flash x626 not boot
hey all,
Saturday morning a wake up to my alarm on my phone (SM-G950U T-Mobile Stock since new) and turn off the alarm and proceed to check email and scroll social medias. A few minuted later phone turns off and starts boot looping. Occasionally it would boot to home screen and i could unlock it but then maybe 30 seconds later it would start boot loping again. Now it either just boot loops or boots straight to recovery . I have tried flashing current firmware in case it was corrupted and i have tried accessing it through ADB. I know for a fact USB debugging is on because I just used abd to pull wifi passwords 2 weeks ago, but when I try to [ abd devices] if comes up as unauthorized and I cannot proceed. I know everyone will suggest a factory reset, but I am hoping someone has a trick for extracting files. I dont care about most on my phone, but I would like to save the pics from my GF and I trip this past august. Apparently I didnt have my photo library set to sync to cloud -_-
thanks
-chip
update: it appears there is a pattern. it boot loops or boots to recovery (after a blue failed system update screen) 99% of the time. the 1% it boot fully and then crashes is only when battery is 0% . it for some reason is only trickle charging and isnt getting enough juice when it does boot fully to stay on . But if i leave it charging a while it will then only boot loop or boot to recovery. Strange...any way I had enough time this past boot to reauthorize usb debug.....wish me luck with adb
....nevermind. still shows up as unauthorized
chip102 said:
hey all,
Saturday morning a wake up to my alarm on my phone (SM-G950U T-Mobile Stock since new) and turn off the alarm and proceed to check email and scroll social medias. A few minuted later phone turns off and starts boot looping. Occasionally it would boot to home screen and i could unlock it but then maybe 30 seconds later it would start boot loping again. Now it either just boot loops or boots straight to recovery . I have tried flashing current firmware in case it was corrupted and i have tried accessing it through ADB. I know for a fact USB debugging is on because I just used abd to pull wifi passwords 2 weeks ago, but when I try to [ abd devices] if comes up as unauthorized and I cannot proceed. I know everyone will suggest a factory reset, but I am hoping someone has a trick for extracting files. I dont care about most on my phone, but I would like to save the pics from my GF and I trip this past august. Apparently I didnt have my photo library set to sync to cloud -_-
thanks
-chip
update: it appears there is a pattern. it boot loops or boots to recovery (after a blue failed system update screen) 99% of the time. the 1% it boot fully and then crashes is only when battery is 0% . it for some reason is only trickle charging and isnt getting enough juice when it does boot fully to stay on . But if i leave it charging a while it will then only boot loop or boot to recovery. Strange...any way I had enough time this past boot to reauthorize usb debug.....wish me luck with adb
....nevermind. still shows up as unauthorized
Click to expand...
Click to collapse
Ive had similar cases happen with older models. May be time for a battery. They will do crazy **** when the battery crashes. When you flashed stock firmware you lost adb authorisation. Need to get the system back first for that.
TheMadScientist said:
Ive had similar cases happen with older models. May be time for a battery. They will do crazy **** when the battery crashes. When you flashed stock firmware you lost adb authorisation. Need to get the system back first for that.
Click to expand...
Click to collapse
thank you very much. my battery life was greatly suffering and the USB-c port was worn pretty bad. Ill grab a new battery and hope that works.
chip102 said:
thank you very much. my battery life was greatly suffering and the USB-c port was worn pretty bad. Ill grab a new battery and hope that works.
Click to expand...
Click to collapse
Cheapest fix in my opinion. I saw another thread a guy dropped his. Now detects 9008 how to fix. More than likely a phone wont just not boot. Or lose programming unless a hardware issue. So if it was just running and quit. Not modding stuff really. More likely than not its gonna be some form of software. But hardware.
TheMadScientist said:
Cheapest fix in my opinion. I saw another thread a guy dropped his. Now detects 9008 how to fix. More than likely a phone wont just not boot. Or lose programming unless a hardware issue. So if it was just running and quit. Not modding stuff really. More likely than not its gonna be some form of software. But hardware.
Click to expand...
Click to collapse
Replaced Daughter board and battery. No improvement :/ bummer
the only time i can get it back into recovery is after a "successful" flash with odin. by successful i mean that it says it worked but it just continues to boot loop or boots to recovery. attached is a picture of the info i get in recovery every time. hope someone can shed some light in the issue. im using my old phone so i dont feel pressured to call the data a loss and try a factory reset just yet....my old phone is a POS though
chip102 said:
the only time i can get it back into recovery is after a "successful" flash with odin. by successful i mean that it says it worked but it just continues to boot loop or boots to recovery. attached is a picture of the info i get in recovery every time. hope someone can shed some light in the issue. im using my old phone so i dont feel pressured to call the data a loss and try a factory reset just yet....my old phone is a POS though
Click to expand...
Click to collapse
Yea some one tried to root it using the edl safestrap thread. Only wsy to fix it is filled the steps and reflash jrkruses pie rom. One of my mother boards are in the same state. That's the only way dm verity fails. Is his rom method.
There's some easy to flash a cache wipe in Odin but I hadn't found it yet. I have 2 mother boards and one is identical. I flash this stock and lose download or recovery. but the errors you show are only from doing that edl safestrap
Ill be honest..i have no idea what you are talking about. Ive messed with the software with previous devices and never heard of safe strap. This one has been bone stock since I got it from Tmobile and i haven't attempt to flash anything until i had this issue. never tried to root it
TheMadScientist said:
Yea some one tried to root it using the edl safestrap thread. Only wsy to fix it is filled the steps and reflash jrkruses pie rom. One of my mother boards are in the same state. That's the only way dm verity fails. Is his rom method.
There's some easy to flash a cache wipe in Odin but I hadn't found it yet. I have 2 mother boards and one is identical. I flash this stock and lose download or recovery. but the errors you show are only from doing that edl safestrap
Click to expand...
Click to collapse
chip102 said:
Ill be honest..i have no idea what you are talking about. Ive messed with the software with previous devices and never heard of safe strap. This one has been bone stock since I got it from Tmobile and i haven't attempt to flash anything until i had this issue. never tried to root it
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8/development/root-t3904613. This thread can help you at least get pie back up and running. I wouldn't mess with no more. I haven't had much luck with mine. But I did get it booting again
I really need help. I don't have a usable phone.
It's a long sad story but I had a working rooted phone with stock Android 9 and Magisk. Because I could not get OTA updates I wanted to update the old version installed, but never succeeded. To make a long story short, since I had a recent Twrp backup so I did a twrp restore.
Rebooting after that caused a boot loop. I finally flashed a stock boot.img using adb and ended with either a boot loop or just the Moto image staying static.
I gave up and decided to do a factory restore.
TWRP is no longer available as recovery. I now get the dead android with red exclamation mark. I got to the options and selected factory restore with wipe user data. Reboot now gives me a static Moto image and nothing further.
I repeated factory restore with wipe user data 2 more times with same result.
How do I get a working phone again?
Please help. Thank you.
Hi there,
I had a similar problem with my phone a few days ago.
Did you try to flash back your stock os with a blank flash? for me this worked, I just had to make sure that ALL files of the Rom image were included in the batch/shell script. For me with a reteu image one was missing (I think the vendor.002 or something like that), otherwise my phone was also stuck at boot.
Maybe that helps! good luck!
Blankflash can be complicated; at least it was for me. Do a Google search, maybe, for LMSA. It's a software program from Lenovo (make sure when you find it that it is lenovos website) and download this app on your windows PC. Normally, and with a little luck, you can put your phone in fastboot mode (it instructs you through all this, too), go-to Restore and LMSA will download the most recent firmware and flash you back to stock. Hope you have some luck! if not I can try to be more helpful with blank / because it took me months to figure out and find a compatible one but I still have it somewhere.
DrHelicopter said:
Hi there,
I had a similar problem with my phone a few days ago.
Did you try to flash back your stock os with a blank flash? for me this worked, I just had to make sure that ALL files of the Rom image were included in the batch/shell script. For me with a reteu image one was missing (I think the vendor.002 or something like that), otherwise my phone was also stuck at boot.
Maybe that helps! good luck!
Click to expand...
Click to collapse
I finally was able to flash stock rom again, re root and restore my apps with Titanium backup. I remembered a partially broken old phone I had and got it working. That relieved the stress of not having a phone and allowed me to work more calmly on my main phone. Still don't know why the twrp restore messed the phone up. Makes me bother why I'm using twrp for backups.
clintongsan said:
Blankflash can be complicated; at least it was for me. Do a Google search, maybe, for LMSA. It's a software program from Lenovo (make sure when you find it that it is lenovos website) and download this app on your windows PC. Normally, and with a little luck, you can put your phone in fastboot mode (it instructs you through all this, too), go-to Restore and LMSA will download the most recent firmware and flash you back to stock. Hope you have some luck! if not I can try to be more helpful with blank / because it took me months to figure out and find a compatible one but I still have it somewhere.
Click to expand...
Click to collapse
I tried LMSA. It had entries for several Moto G7 phones (plus, etc) but not the plain G7. Strange.
maybeme2 said:
I tried LMSA. It had entries for several Moto G7 phones (plus, etc) but not the plain G7. Strange.
Click to expand...
Click to collapse
I don't know if you still want to flash via fastboot, but there is a good guide for the g7 plus here .
You just need the last part, if your bootloader is working. Just keep in mind you need another image from lolinet, the standard G7 is codenamed 'river' as far as i know, so this should be the place for you.
And remember to check if all files (of the extracted image) are included in the 'flashfile.bat' to ensure the flash is complete, otherwise it maybe won't boot.
Hope this helps recovering your phone!
RE:
maybeme2 said:
I tried LMSA. It had entries for several Moto G7 phones (plus, etc) but not the plain G7. Strange.
Click to expand...
Click to collapse
Hmm, okay. That is strange but maybe you have the G7 Plus variant? I don't know that model but the regular G7 is codenamed to (river) xt1962-1. So if you boot into fastboot (from power off; volume down and power held until the fastboot screen appears), look for the third or fourth line down, it will read something like "Product/Variant: river XT1962-1 64GB..." just to ensure that you are looking at the right forum/device. If you are still having issues and if all else does not prove successful, let me know and I can share the blankflash that worked for me along with the best instructions from memory on how I did it. My phone was once bricked to the point where no screen came on at all and I thought it was a goner (actually did it to two seperate G7s as I was learning why Lineage isn't my favorite custom ROM at the time lol) so I know the blankflash I have will work but I would recommend it as a last measure due to the fact that any and all data will be wiped so you won't be able to hold onto anything that is on the device's storage, itself. Hope you got it fixed and wishin you luck!
---------- Post added at 11:13 PM ---------- Previous post was at 11:10 PM ----------
DrHelicopter said:
Hi there,
I had a similar problem with my phone a few days ago.
Did you try to flash back your stock os with a blank flash? for me this worked, I just had to make sure that ALL files of the Rom image were included in the batch/shell script. For me with a reteu image one was missing (I think the vendor.002 or something like that), otherwise my phone was also stuck at boot.
Maybe that helps! good luck!
Click to expand...
Click to collapse
Hey there; do you happen to have a page or website handy that explains blankflash and how the script runs? I remember there being so much confusion over it such as some people had me thinking I needed to find an external firehose program, codes, etc., and as it turned out I only needed the correct blankflash. I was able to fix my devices a couple of months ago but I was just still a bit curious as to the behind-the-scenes details that the software runs in order to be such an awesome fix. Thanks, in advance. Take care!
Fortunately I was finally able to download the latest stock android 9 from Lolinet and flash it to the phone with fastboot. I rooted again with Magisk, flashed copypartitions, and restored my apps and data from a recent Titanium Backup. So I am good now. But, it was very stressful for 2-3 days because I'm not an expert.
Yes the phone is river XT1962-1 64GB, but for some reason my LMSA did not recognize it. Extremely strange but unimportant now since I'm now back in business. I don't know for sure what happened but I suspect it may have had something to do with Moto G7's A / B partitions getting mixed up.
LMSA needs to be updated if there is no Moto g7 option. I just checked on my install and the option was there.
Has anyone ever actually used a TWRP restore? I have tried numerous times to no avail. It's rather annoying but I hope it'll get fixed one day to do backups/restores...same goes for adb backups.
clintongsan said:
Has anyone ever actually used a TWRP restore? I have tried numerous times to no avail. It's rather annoying but I hope it'll get fixed one day to do backups/restores...same goes for adb backups.
Click to expand...
Click to collapse
I've successfully used twrp restores several times on previous phones. Saved me many times. But they were all on Nexus phones and earlier android versions.
The only time I used it on the Moto G7 I got stuck in a bootloop. Maybe it's the newer A B dual partitions causing my problems. Don't know for sure. But without a dependable system restore capability, twrp loses its value to me.
Now I am even afraid to try another twrp restore as a test in case I get thrown back into a boot loop. See my note on
https://forum.xda-developers.com/g7-plus/development/recovery-twrp-3-3-0-moto-g7-plus-t3930050/page9