Related
Hi Guys,
I'm sure some of you may have heard about this error before.
Well, here's my sad sad story.
After trying to root my s7 edge,
Everything seems fine.
One day when i re-format my phone, and after which downloaded a few apps, there wasn't any issue at all
However when i restarted my phone, i saw the error msg : Custom Binary block by FRP Lock
And after which it can't boot up anymore.
Anyone of you guys able to help me ?
It'll be much appreciated!
Flash the stock firmware with ODIN
Envoyé de mon SM-G935F en utilisant Tapatalk
Thanks for the reply,
Sorry but I'm new. How do i do that?
pr0cupid said:
Thanks for the reply,
Sorry but I'm new. How do i do that?
Click to expand...
Click to collapse
What model? Country
Sent from my Blackberry Bold
Model : SM-G935FD
Country : Singapore
frp lock s7 edge
pr0cupid said:
Hi Guys,
I'm sure some of you may have heard about this error before.
Well, here's my sad sad story.
After trying to root my s7 edge,
Everything seems fine.
One day when i re-format my phone, and after which downloaded a few apps, there wasn't any issue at all
However when i restarted my phone, i saw the error msg : Custom Binary block by FRP Lock
And after which it can't boot up anymore.
Anyone of you guys able to help me ?
It'll be much appreciated!
Click to expand...
Click to collapse
i have same issue here, did you find any solutions ?
AFAIK when you factory reset your phone etc. if rooted you must remember to go back into Developer Options and re enable OEM Unlocking. This depends on the method you used to root, if you flashed dm-verity then you "May not" have this issue but cannot say for sure.
If it is already too late for you then I think you need to flash stock via Odin, plenty of threads out there on where to find the firmware (SamMobile) and how to do it. Even a quick google of the error gave me plenty of results...
One thing I have read is that you may have to keep trying to get your phone into download mode as the timing is much stricter with this error message.
I've the same problem with my g935x blocked on FRP when ii treid to root if any one can help .plz
https://drive.google.com/file/d/0B4sLrKlVs0CPQTBaamduLXdNYW8/view?usp=sharing
wHEN THE PHONE INICIALIZES PUT THIS FILE IN A OTG pendrivve install and do the reset by the menu of the phone.
djluisbento said:
https://drive.google.com/file/d/0B4sLrKlVs0CPQTBaamduLXdNYW8/view?usp=sharing
wHEN THE PHONE INICIALIZES PUT THIS FILE IN A OTG pendrivve install and do the reset by the menu of the phone.
Click to expand...
Click to collapse
@djluisbento This method seems to be interesting. But would you please clarify more about it. How to install the apk file on official recovery? Or it's enough to have the pendrive connected? And if yes, when this step should take place, after flashing the official ROM or when?
I'm stuck in a boot loop into recovery mode with dm-verity error, and unfortunately I have the FRP locked, so I can't install TWRP to flash the no-dm-verity.zip file to skip it.
Appreciate your suggestions.
I have the same issure. stock firmware wont install either. im just stuck on the FRP screen, cant even get into recovery
Same issue here, please help
Everything was fine with rooting and installing TWRP. after that did a restart/ attempt to goto twrp recovery, from then the s7 edge is stuck at "Custom Binary Blocked By FRP" and doesnt boot. please help!!
Have you do a Wipe then Format Data.
Then flash the no-verity-opt-encrypt zip in TWRP
Only if you want internal storage or data to work in TWRP:
Go to [Wipe] -> [Format Data] (not advanced wipe) -> type "yes".
WARNING: This will wipe your internal storage, disable encryption, and factory reset your phone!
Go to [Reboot] -> [Recovery].
If you want to be rooted with SuperSU:
Download the latest SuperSU by Chainfire.
Without exiting TWRP, transfer the SuperSU zip to your device over MTP* and flash it using [Install] in TWRP.
If you only want a bootable system partition or writable data in TWRP:
Download the latest dm-verity and force encryption disabler zip.
Without exiting TWRP, transfer the no-verity-opt-encrypt zip to your device over MTP* and flash it using [Install] in TWRP.
Click to expand...
Click to collapse
just quoting from the original thread by jcadduono.
Had that problem with a brand new phone, just wanted to get into download mode to see if the phone was tampered with and boom, flash screen with the red warning, flashed stock KSA (phone original CSC) , worked and phone was formatted, another surprise was faced, google did not accept my gmail account, had to shut down phone for 72 hours as read in my google search for people encountering same issue, once the 72 hours passed I was able to sign in and using my phone again.
maxkento said:
Have you do a Wipe then Format Data.
Then flash the no-verity-opt-encrypt zip in TWRP
just quoting from the original thread by jcadduono.
Click to expand...
Click to collapse
taiseer999 said:
Had that problem with a brand new phone, just wanted to get into download mode to see if the phone was tampered with and boom, flash screen with the red warning, flashed stock KSA (phone original CSC) , worked and phone was formatted, another surprise was faced, google did not accept my gmail account, had to shut down phone for 72 hours as read in my google search for people encountering same issue, once the 72 hours passed I was able to sign in and using my phone again.
Click to expand...
Click to collapse
Yes, flashed both Zips in recovery. I used my regular google account during the initial set up. If i wait for 72 hours, will the phone just boot back online just fine? Still, how do i make sure it wont goto the FRP lock again while trying to reboot or reboot to TWRP?
Solved,
Flashed with stock firmware, logged in with same google account, rooted with TWRP, installed Zubi's sound mod. Made sure to keep the 'OEM Unlock' stay turned on.
anoopgopalpt said:
Flashed with stock firmware, logged in with same google account, rooted with TWRP, installed Zubi's sound mod. Made sure to keep the 'OEM Unlock' stay turned on.
Click to expand...
Click to collapse
Helo
But U did this after 72 hours?
There are several methods depending on firmware version installed on your phone. Basically you have to enter in your phone, launch chrome, install an app which gives you the possibility to log into your google account from chrome and not set-up program.
I used successfully the Bluetooth method. Search for with google. You need a bluetooth headset and follow the steps described on youtube.
BTW. My phone was brand new and I flashed different official samsung firmware ( csc). I had to change google password in between and that resulted in FRP lock....
The wait time is 24 hours as is stated in google docs from site
Sent from my SM-G935F using XDA-Developers mobile app
Hello I have a related problem, opened a new thread, but my thread was closed, because my problem is related to this one, but more complicated. I have the same problem with FRP lock as described here, I can turn on the download mode but it wont be recognized by my computer. I tried different usb cables, drivers, even computers, it wont help. I cant flash it with odin, smartswitch, kies, no matter what I try. If I go to recovery mode it says `dm-verity verification failed...`and if I choose `apply update from ADB or SD card` it says `update from external storage disabled`. I dont know what to do anymore Its a new phone
FRP Block - no Dev Tools enabled
Hey guys,
you're my last resort, I've tried everything I happened to come across, to no avail.
First off, I did something incredibly stupid, don't even ask me why, as I have no idea what the heck drove me to do this in the first place.
Anyways, I was using the stock ROM on my S7 Edge, not tweaked or tinkered with besides the usual CF-Auto_Root. It never caused any trouble whatsoever. But for no reason at all this morning I decided to disable USB debuggin and OEM unlock. A short while later I rebooted my phone, which ended up in "Custom binary blocked by FRP Lock".
I gave a factory reset a try, but that obviously didn't change a thing. So I went to sammobile.com and downloaded the latest official stock ROM for my device and tried flashing it with Odin. Unfortnately Odin always fails with "Complete(Write) operation failed.", which I assume is because I messed with the settings in dev mode.
Next stop: ADB. I've never used that thing before, but I thought I should possibly be able to get it done following a simple guide. Unfortunately ADB won't even list my device when typing "adb devices". It's just an empty list.
So please guys, give me some tipps on how I can bring my phone back to life.
Tuesday
306sh activated with MVNO, SA300 firmware, rooted, with TWRP recovery,
working fine for past 2 months.
For unknown reasons, it decided last friday (at home, none to low signal) to do a system update
(from SA300 to S7232). Phone - on the desk- just "dinged" and msg came up "updating
system software". I attempted to cancel, but it didn't respond. Less than a minute later, "Update Successful" msg. Didn't reboot, anything, settings showed S7232 firmware. (SA300 before,
i had done my weekly backup earlier that morning).
Since then, phone constantly reboots at the "Aquos" screen; after an average 8 hours of rebooting, it will boot to setup, the talking setup screen. Works perfect for about an hour then rebooting starts again. Let battery die last nite, tried again this am - same thing rebooting.
TWRP backups don't fix problem- weekly backup, i have 6 i've tried, factory reset doesn't fix, if i try to Software Update, it checks, tells me, "up to date".
I turn on wi-fi to use the phone from home, , guessing it did a ? hit & miss ? ota update since the
wi-fi was off when it attempted the update. Home is a very minimal signal area.
Any way to force it to take the S7232 update again?
(I could update over wi-fi if i had wanted, only i didn't want the update anyhow).
thanks, rik
I can give you a link for a backup with latest firmware, you will have to wipe data tho
https://mega.nz/#!fkommKgJ!fkiaT_p8ZFOBzyJpUdNAqOZlTWpt-5hNuQ-2vvA5tSQ
This is a full backup from newest firmware but you need to wipe data before boot
sent from rooted 306sh
Stick firmware updates are not compatible with custom recoveries
sent from rooted 306sh
Just home, thanks
Hi,
Thanks for the help, just home from work (rough), so i will plug the
Aquos in tonite and hopefully be able to try the file tomorrow,
(that 8 hour boot thing), just downloaded your file, i'm ready.
This is my take-to-work personal phone, sprint zone, and i missed it today.
Your help is really appreciated.
rik
Final note
thought i'd just post to let you know the phone obviously had big problems
-- it failed to start today -- just buzz on buzz off -- even after 4 hours charging,
all i could get was the battery dead screen, wouldn't come on at all.
Guess the real problem was with hardware, i laid it away in the junk phone box
in the attic, end of Aquos Crystal.
rik
I downloaded this backup and yesterday to restore the firmware, works great, huge thank you , you saved me. :хорошо:
can you help me?
badbadri said:
I downloaded this backup and yesterday to restore the firmware, works great, huge thank you , you saved me. :хорошо:
Click to expand...
Click to collapse
can you help me dude? :crying:
im already download this firmware and confuse how to restore it
im looking for how to root my phone but always confuse
and finally i installed supersu on playstore and reboot
im waiting for 5 minutes and not booting, and im plug my phone to pc and the computer request for formating all my storage
and my phone can enter the recovery mode and i go to wipe data & factory reset, and still not work
can you send to my email?
my email is [email protected]
thx ..
Question: My 306SH would not update (still at S8216). Could use your back up to update my firmaware?
After 306SH ph was acting weird, did a hard reset & saw system Software updtd to S7232, & unk file in Misc (.eCtcQjbu1dgnvtFnvnr6yepTp1M=) I then installed Malwarebytes & scan detects this S7232 software update as malicious malware Android/PUP.RiskyTool.Agent.ay (dm.redbend) "/system/priv-app/fotaClient.apk". When going to System to do an manual update, Malwarebytes popups w/same msg every scan "Software App", even aft reboot 2days ago 7/12/2017. And phone wont let me create new google acct. An error that "google account mgr not working" popup & I see that same unk file reappears. Ph not rooted -XDA says "there's no root for 306SH that works">see XDA blog 'Root for Aquos Crystal 306SH ONLY'.
Go to the Sharp USA website for the 306SH firmware, and see what firmware you are on.
Download the firmware from the versions higher than yours, and if there is a repeat, notably "kernel.img", download the most latest version of it.
Then, plug your device into your computer, make sure you have the proper drivers installed for the Sharp Aquos Crystal installed on your computer. Boot your device into bootloader. Go to a terminal, cd to the directory where you downloaded your .img's from the website, and do
fastboot flash kernel kernel.img
Ex.
fastboot flash foo foo.img
And you can flash all the latest updates. When done, exit the terminal, make sure the device is unmounted, unplug from computer, and reboot your Crystal.
Hooray, it should be updated!
turkbot said:
I can give you a link for a backup with latest firmware, you will have to wipe data tho
(Mega-nz link expired)
This is a full backup from newest firmware but you need to wipe data before boot
sent from rooted 306sh
Click to expand...
Click to collapse
Turkbot, I hate to beg on my first XDA post, but is there any chance that you still have that ROM and is there any chhance that it's not TextNow loaded? I've got TWRP, Busybox, SuperSU, Xposed, and I've tried every which way to edit the prop, tweak it with modules, unlock etc (it even works with my Sprint MSL, but crashes when I try to manually set my MDN and MSID) It just says no SIM/no service and refused to give me any signal except for GPS and WIFI without one. Countless 'techs' over the phone and 3 different Sprint repair stores claim they don't have the stock firmware and Sharp actually claims that the reason they can't help me with the firmware is their contract with Sprint forbids it.. If you still have the file or a TWRP / Titanium etc backup you would be my savior.
hey guys,
i think i made something really stupid.
-unlocked bootloader
-installed TWRP
-rooted
everthing was fine B161.
installed apps2sd and did something there so my phone was stuck in bootloop.
now the stupid part:
i wiped everything in TWRP... system, internal storage everything... i am such a douchebag!
I tried to recover with eRecovery and install stock firmware B161. Update process was successful and i can start my phone again.
but everytime i start the setup wizard i am stuck after wi-fi+ service (enhanced internet expierence) the screen shows "checking data.." for 1 second and switched back to wi-fi+ service.
is there anything i can do? guys help me please i am starting to freak out.
is my guarantee voided after i unlocked my phone?
fastboot shows
-phone locked
-frp locked
THANKS FOR ANY HELP!
khajiit said:
hey guys,
i think i made something really stupid.
-unlocked bootloader
-installed TWRP
-rooted
everthing was fine B161.
installed apps2sd and did something there so my phone was stuck in bootloop.
now the stupid part:
i wiped everything in TWRP... system, internal storage everything... i am such a douchebag!
I tried to recover with eRecovery and install stock firmware B161. Update process was successful and i can start my phone again.
but everytime i start the setup wizard i am stuck after wi-fi+ service (enhanced internet expierence) the screen shows "checking data.." for 1 second and switched back to wi-fi+ service.
is there anything i can do? guys help me please i am starting to freak out.
is my guarantee voided after i unlocked my phone?
fastboot shows
-phone locked
-frp locked
THANKS FOR ANY HELP!
Click to expand...
Click to collapse
did you do factory reset? I had some weird stuff going on after recovery, so I booted back to factory reset (vol + and power), after that it worked OK.
Once you requested the bootloader unlock key, your warranty might be void from that point (depends on country). The bootloader gets locked after flashing official firmware via eRecovery though.
yes i did a factory reset, still can't proceed after wi-fi+ configuration.
is there anything else i can do?
I have one question: is it possible with
-frp locked
and
-phone locked
to downgrade via eRecovery? (to b130 or something..)
I have the exact same problem.
I bought it 3 days ago, and suddenly yesterday downloaded Apps (from the Play Store) stopped working. So someone told me to hard reset it. I got into EMUI and did it. Then I rebooted it and now it stuck there. Can't complete the setup wizard.
I found no solution to my problem after reading google & xda-forum for 3 days. Tried everything... nothing worked. Sent it back and (luckily) got a new one. Now i'm more careful for sure.
The store I bought it from claimed that they had numerous similar complaints about the 3gb version. Which is the one I have. They told me I should take it back and that they will give me a new 2gb version along with any difference in money. We will see.
Exact same thing with me stuck at setup wizard so had to send it off for warranty and got a brand new phone yesterday
Sent from my HUAWEI VNS-L31 using XDA-Developers mobile app
Help please my Huawei P9 cannot proceed afta WiFi setting it is stuck on "Checking info "and Reply saying "Couldn't sign in"
The problem is Android System Webview, it's not a system app in this rom and when you reset your phone it deletes it, happened the same to me, I had to go to a huawei center, they menaged to skip the initial setup and I've installed the apk from apk mirror. Without this app the phone can't login in your google account, so if you don't install it your gapps won't work
Maxai94 said:
The problem is Android System Webview, it's not a system app in this rom and when you reset your phone it deletes it, happened the same to me, I had to go to a huawei center, they menaged to skip the initial setup and I've installed the apk from apk mirror. Without this app the phone can't login in your google account, so if you don't install it your gapps won't work
Click to expand...
Click to collapse
Hello,
does ist really work? Is it just installing the androidsystemview.apk and the phone works fine again?
huawei p9 lite bricked ...please i need a help
my phone stoped in fastboot...
phone locked
frp lock
i can´t enter on recovery mode and he not pass the huawei icon ...
please i need help
i do not connect phone to pc ....
contact me to solve the problem
I'm having exact problem with my mate 8 NXT-L09, after i had to factory reset when update from firmware finder failed. Anyway to bypass this problem? Do you have a way of add Android System View into the mate 8 during the bootup process. I love this mate 8 phone and 5 days now i has been torture.
logjam said:
I'm having exact problem with my mate 8 NXT-L09, after i had to factory reset when update from firmware finder failed. Anyway to bypass this problem? Do you have a way of add Android System View into the mate 8 during the bootup process. I love this mate 8 phone and 5 days now i has been torture.
Click to expand...
Click to collapse
Reflash the rom you were on using the "dload" method
dariomrk said:
Reflash the rom you were on using the "dload" method
Click to expand...
Click to collapse
Sorry, dont have the previous ROM, I boiught it off someone and they probably did the first update. The factory reset should reset to huawei original but i think this is where my problem sits.
HARDWARE VERSION=NEXT_L09_VN2
BOOTLOADER VERSION=NXT-C900B120_FASTBOOT
KERNEL VERSION=NXT-C900BB140_BOOT
AP VERSION=NXT-C900B140_SYSTEM
CP VERSION=21.750.08.00.010(balong)
Parameter Version:
P-00.00.000 G-17.V271.371 E-40.01.000
does anyone have an international rom for this or any version that can work.
The way i was able to factory reset was
1. going to huawei site. "consumerDOThuaweiDOTcomSLASHjmSLASHsupportSLASHdownloadsSLASHindexDOThtm"
change slash to / and dots to .
2. Select options for your phone, mine was NXT-L09. Will show "HUAWEI Mate 8 Firmware(NXT-L09, Android 6.0, EMUI 4.0, C605B100, Latin America, Channel-Others)"
3. Download, extract onto sdcard in dload folder, restart phone using vol up & vol down & power.
4. phone will complete boot restart but will then loop the boot process.
5. Do factory reset again
6. After huawei logo, different options show and you are then ok to proceed to login to your google account and setup refreshed phone.
Now on NXT-L09C900B100 build, if anyone has nougat rom for this, please share.
For future reference, if anyone gets stuck with this on P9 lite, indeed the instructions provided by Huawei point to VNS-L11C432B161, which doesn't include Android webview and therefore initial setup cannot proceed. The solution is to flash B210 on top of B161:
update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v80562/f1/full/update.zip
which allows you to pass setup as the bug has been fixed. No root/unlock/twrp required.
EDIT: Solution was to sit with OP5 technician which flashed my ROM to Oxygen 4.5.1. After this didn't do it, I RMA-ed it and got a new OP5.
EDIT: TL;DR: After updating OP5 to 4.5.5, It doesn't recognizes sim nor wifi, and can't rollback to 4.5.3 that did and stuck on phone setup (needs wifi). ADB devices is empty, I have Google USB Driver from SDK, Windows 10
Hello,
I just got a new OP5 today.
Opened it in the store, came with Oxygen 4.5.3 outta the box.
I putted the sim in, and I connected to the store's wifi, all was good and even had a phone call to my mother to check if the mic and speaker are working well.
Then when I got home, I upgraded the OS to 4.5.5 through the settings, where Android suggested. I'm new to OP and android (moved from iphone 5) and so if there is a right way to do it, and that's not it, I wouldn't have known.
Then, OP5 didn't recognize the sim anymore and couldn't start the wifi (switching it on wouldn't work, it would do nothing), so I tried Factory reset. Unfortunately it didn't reset the OS as well and now I'm stuck outside can't use my sim card or connect to my home wifi to setup the device.
Tried installing OP5 usb drivers (show when connecting the OP5 to PC) and press the power button and lower speaker volume together, then flush the 4.5.3 OS through USB, but it doesn't recognize ZIP folder and when I tried to unzip and send boot image (cmd->"adb sideload boot.img) it started and then failed at 0%.
Please help, the phone right now is unusable.
Tried the Factory reset through settings, but it took so long I thought it was stuck, so I did it through recovery screen.
Sounds like you got a lemon... I'd take it back and see if they'll swap it for another. Less than a week should be replaced immediatelly, at least that's been my experience here in Oz...
ultramag69 said:
Sounds like you got a lemon... I'd take it back and see if they'll swap it for another. Less than a week should be replaced immediatelly, at least that's been my experience here in Oz...
Click to expand...
Click to collapse
Why should it be replaced in less than a week? Also, isn't there a fix for adb problem so I could flash 4.3.5? Maybe a remote takeover?
Mine had 4.5.3 on it when I got it, updated to 4.5.4 then manually downloaded full rom, placed on internal memory and flashed 4.5.5 through the settings.
Had zero problems with WIFI before, during and after the update. No problems since.
Generally updating to a higher firmware version won't allow you to regress back to the lower, not sure with Oneplus as this is my first.
I'd also, if you can boot into Android go to settings nd check my IMEI numbers to see if they have been wiped (this can cause the sim to not be recognised) . If you have no IMEI then that is a BIG problem which will require an RMA unless you had backed up your efs files which from your description I doubt..
If the IMEI is OK I would download the full firmware version from here - https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-mirrors-official-oxygen-os-t3628190 - then using PC put the FULL ROM onto the internal memory then go to recovery and flash.
I'd also then unlock my bootloader(Just remember though that the phone will wipe all data after unlocking bootloader) and install TWRP - don't forget to 1st enable developer mode in settings and then allow usb debugging and OEM unlock - make a backup of the working stock rom and put it somewhere safe - home PC, in case this happens again. Best idea is to use the all-in-one tool, here - https://forum.xda-developers.com/on...l-skipsoft-android-toolkit-oneplus-5-t3625419 thankyou MSkip.
ultramag69 said:
Mine had 4.5.3 on it when I got it, updated to 4.5.4 then manually downloaded full rom, placed on internal memory and flashed 4.5.5 through the settings.
Had zero problems with WIFI before, during and after the update. No problems since.
Generally updating to a higher firmware version won't allow you to regress back to the lower, not sure with Oneplus as this is my first.
I'd also, if you can boot into Android go to settings nd check my IMEI numbers to see if they have been wiped (this can cause the sim to not be recognised) . If you have no IMEI then that is a BIG problem which will require an RMA unless you had backed up your efs files which from your description I doubt..
If the IMEI is OK I would download the full firmware version from here - https://forum.xda-developers.com/oneplus-5/how-to/oneplus-5-mirrors-official-oxygen-os-t3628190 - then using PC put the FULL ROM onto the internal memory then go to recovery and flash.
I'd also then unlock my bootloader(Just remember though that the phone will wipe all data after unlocking bootloader) and install TWRP - don't forget to 1st enable developer mode in settings and then allow usb debugging and OEM unlock - make a backup of the working stock rom and put it somewhere safe - home PC, in case this happens again. Best idea is to use the all-in-one tool, here - https://forum.xda-developers.com/on...l-skipsoft-android-toolkit-oneplus-5-t3625419 thankyou MSkip.
Click to expand...
Click to collapse
I can't pass the "Connect to Wifi" in the initial setup of the android, as it finds no wifi networks (but of course there are, when I use the sim in my iphone it works properly and there are wifi networks). So I don't know how can I get the IMEI number.
Right now my PC recognizes the OP5 connected via USB, but "adb devices" bring back empty list.
I think that once I get that working, I could unlock the bootloader. But I can't seem to be able to enable dev mode in settings - I can't get there.
I can only get to the recovery screen beyond the initial steps of setting up android.
Right now there is no important data on the phone and I have my laptop which is virgin to ADBs and Drivers (didn't use it to try to resolve it).
What driver and where do I get the right ADB so I could load 4.5.3 from usb to the phone?
When you upgraded, did you wipe cache and dalvik?
Binary Assault said:
When you upgraded, did you wipe cache and dalvik?
Click to expand...
Click to collapse
Wiped after the upgrade whem problems started
Might be wrong but I thought you could skip the wifi select screen on the setup wizard.
If you can get to Android you need to go to settings, scroll down to about phone and tap around 8 times on build number to enable developer settings.
You might be able to, might, pull down the settings menu in the wizard and bypass the wizard.
ultramag69 said:
Might be wrong but I thought you could skip the wifi select screen on the setup wizard.
If you can get to Android you need to go to settings, scroll down to about phone and tap around 8 times on build number to enable developer settings.
You might be able to, might, pull down the settings menu in the wizard and bypass the wizard.
Click to expand...
Click to collapse
It doesn't seem like I can skip it. Can't pull down a menu or anything
I guess only Oneplus can help me now?
Do you have any suggestion on fixing adb so it would recognize the OP5?
No, you need to enable debugging in developer settings for ADB to recognise.
Time to RMA...
ultramag69 said:
No, you need to enable debugging in developer settings for ADB to recognise.
Time to RMA...
Click to expand...
Click to collapse
Welp it is a pickle.
Going to go live chat with OP "level 2" representative.
See if they wipe the phone out and restore an older ROM.
If that't not going to work, RMA it is :/
Shame. A new phone. Took only one picture with my dad when we opened it back at the store. nothing else.
Unfortunately bad things can happen... You just got to be the one who got the dud this time round.....
Here's hoping it's the last time....
you can force update to a fresh installation of 4.5.5 by putting the 4.5.5 full zip into your phone in a folder called "update". Reboot to recovery im assuming you have stock recovery and follow the steps until you find the option that says something along the lines of "Update manually". It will detect if you have an update folder stored on your phone and it will begin reinstalling OOS 4.5.5. It sounds like a software problem but could be a hardware problem. Rule out the first option before RMA the latter.
OcazPrime said:
you can force update to a fresh installation of 4.5.5 by putting the 4.5.5 full zip into your phone in a folder called "update". Reboot to recovery im assuming you have stock recovery and follow the steps until you find the option that says something along the lines of "Update manually". It will detect if you have an update folder stored on your phone and it will begin reinstalling OOS 4.5.5. It sounds like a software problem but could be a hardware problem. Rule out the first option before RMA the latter.
Click to expand...
Click to collapse
When I connect the OP5 to the PC there are no folders under it (Computer -> OP A500 -> no folders), but I'll try and give it a shot. see what happens. Will update this reply.
Update:
After Oneplus flashed Oxygen 4.5.1 on the phone and some other magic I was able to skip wifi step on setup, yet still when I try to activate it it won't budge. the slider won't move and it looks as the page is being refreshed. Also, when I try to get into sim section in settings it would just freeze and alert the program stopped and suggest to close or wait.
Oneplus says it is hardware issue, and the fact it happened when I upgraded to 4.5.5 from settings menus is coincidence. They say I need RMA it.
If anyone knows how to fix it then I'm more than welcome to hear it.
EDIT: it also won't shut off unless I long press the power button.
Hello Community! I hope I am right here, otherwise please just move this thread to where it belongs to, thanks!
I have a serious problem with my sgs 8 (950F). I flashed newest twrp, magisk, renovate-ice-g95x-r164 and no-verity-opt-encrypt-5.1. Everything worked fine and like a charme. I decided to update to a nightly version (worst decision ever) and before i was able to flash, twrp said: zip file corrupted. So I decided to go back to version 164 via the full backup i´ve made in twrp before. After the restore-process was finished, the device didn´t recognize the sim card anymore. So I tried to go back to stock firmware, which did not work since (after odin says pass) the firmware always stops at 32% and erases everything but the download mode on my phone. So I flashed twrp again, made a full wipe und data format and installed the renovate ice 164 again. After the boot, the sim card is detected and I also have to unlock it with the pin code. The problem is, that i can´t enter the network (Austria/Telering) and also I can´t search for any networks with my sim card, only emergency call is available. I am desperately looking for a solution to solve that problem and since I am no expert when it comes to details in flashing and the connections between hardware and software, i really could need help from experts. My guess is, that something is wrong with the modem. Can this be solved by flashing the mode new via odin? Stock firmware is not able to be flashed on my device, because of the error I mentioned above.
Thanks for you help and time!